Need help with Sound Problem

If you have 1 sound file playing on say frame 1, how do you
get frame 2 to play a different sound, without playing frame one's
sound as well? Right now 'frame 2' is playing both sound files. If
I use the commande 'stopAllSounds' the frame 2 sound file will not
play either.
Please help. Thank you.

nwbgator wrote:
> If you have 1 sound file playing on say frame 1, how do
you get frame 2 to play
> a different sound, without playing frame one's sound as
well? Right now 'frame
> 2' is playing both sound files. If I use the commande
'stopAllSounds' the
> frame 2 sound file will not play either.
The sound once started will play for as long as you loop it
or as long as its length
is (if not loop is define). Even sound run independent to
timeline so if you enter
frame 2 it will simply play another sound.
You need to make some on/off switches on frames or actions
that will control the
sound. Entering another frame won't do it and using
stopAllSounds works like purge
and clear player from all its sounds. The only way to get
sound back will be by
reloading the entire movie. One of these actions that not
many of us are using.
Best Regards
Urami
!!!!!!! Merry Christmas !!!!!!!
Happy New Year
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Similar Messages

Need help with daq problem

Hi,
I need to generate a clock with a period of 20 micro seconds, duty cycle of
approx 20% and a data line as well as an address line all linked to the clock
pulse.
I have tried many different solutions, all using the Daq PCI-1200 but nothing
seems to work correctly. Usually the system bombs and I have to do a manual
reset to over come the problem.
Any suggestions?
Ken

Hallo, Ken,
Du meintest am 20.02.00 zum Thema Need help with daq problem:
> I need to generate a clock with a period of 20 micro seconds, duty
> cycle of approx 20% and a data line as well as an address line all
> linked to the clock pulse.
You'll need an external clock, expecially under Windows.
Windows ticks with appr. 18 Hz, and the CPU tick isn't always available
when Windows tasks multi.
Viele Gruesse!
Helmut

Need help with Sound Methods

Hi, I am new to java and need help with sound methods.
q: create a new method that will halve the volume of the positive values and double the volume of the negative values.
Message was edited by:
Apaula30

duplicate message #2

Need help with getResource() problem under weblogic 6.1

Hey all,
          I've got a serious problem that I can't figure out. This should be really
          simple - but it's alluding me. I have an ear file with a number of servlets
          inside it. This ear file also contains a resource that my servlets want to
          read from. This resource is located (within the ear file) at:
          "/content/structure/a.txt". The file contains raw ascii.
          To have my serlvet read from this file, I thought it would be as simple as:
          URL content =
          servlet.getServletContext().getResource("/content/structure/a.txt");
          // pw is an instance of PrintWriter
          pw.print(content.getContent());
          However, when I execute the above I get the following exception:
          java.lang.NullPointerException
          at
          java.net.URLConnection.stripOffParameters(URLConnection.java:1011)
          at java.net.URLConnection.getContentHandler(URLConnection.java:979)
          at java.net.URLConnection.getContent(URLConnection.java:581)
          OK, so fine - I figure that I'm new to this. The documentation for the URL
          class tells me there is another way around this. It says that rather then
          calling getContent() directly, I can open a stream on the URL and read from
          that, like so:
          URL content =
          servlet.getServletContext().getResource("/content/structure/scenario2resourc
          es.txt");
          FileInputStream fis = content.openStream();
          but when I do this I get the following different exception:
          java.lang.ClassCastException: weblogic.utils.zip.SafeZipFileInputStream^M
          at Utility.writeFileToOutput(Utility.java:134)^M
          Apparently this thing is trying to return a web-logic-specific stream (which
          is incompatible with an FileInputStream) - which I don't want to use or
          learn about since I want my stuff to work under other webservers.
          Can anyone tell me what I'm doing wrong? This should be simple.
          -john
          John Hilgedick
          WisdomTools, Inc.
          [email protected]


Wenjin,
          I appreciate your response. I tried treating it as a normal InputStream -
          but it didn't make any difference. Here's what I did:
          URL content =
          servlet.getServletContext().getResource("/content/structure/scenario2resourc
          es.txt");
          InputStream is = (InputStream)content.getContent();
          And here's the exception:
          java.lang.NullPointerException^M
          at
          java.net.URLConnection.stripOffParameters(URLConnection.java:1011)^M
          at
          java.net.URLConnection.getContentHandler(URLConnection.java:979)^M
          at java.net.URLConnection.getContent(URLConnection.java:554)^M
          at java.net.URL.getContent(URL.java:807)^M
          at Utility.writeFileToOutput(Utility.java:134)^M
          You can see that it is definitely breaking somewhere in getContent().
          If you have any other ideas, I'd appreciate hearing about them.
          -john
          ----- Original Message -----
          From: "Wenjin Zhang" <[email protected]>
          Newsgroups: weblogic.developer.interest.servlet
          Sent: Wednesday, November 20, 2002 5:03 PM
          Subject: Re: Need help with getResource() problem under weblogic 6.1
          >
          > The "/" in getServletContext().getResource("/content/structure/a.txt")
          means the
          > web (WAR) application root, not your EAR root.
          >
          > The ClassCastException is because that content.openStream() is not
          FileInputStream
          > and has nothing to do with Weblogic. You should treat it as normal
          InputStream.
          >
          >
          > "John Hilgedick" <[email protected]> wrote:
          > >Hey all,
          > >
          > >I've got a serious problem that I can't figure out. This should be
          really
          > >simple - but it's alluding me. I have an ear file with a number of
          servlets
          > >inside it. This ear file also contains a resource that my servlets want
          > >to
          > >read from. This resource is located (within the ear file) at:
          > >"/content/structure/a.txt". The file contains raw ascii.
          > >
          > >To have my serlvet read from this file, I thought it would be as simple
          > >as:
          > >
          > >URL content =
          > >servlet.getServletContext().getResource("/content/structure/a.txt");
          > >// pw is an instance of PrintWriter
          > >pw.print(content.getContent());
          > >
          > >However, when I execute the above I get the following exception:
          > >
          > >java.lang.NullPointerException
          > > at
          > >java.net.URLConnection.stripOffParameters(URLConnection.java:1011)
          > > at
          java.net.URLConnection.getContentHandler(URLConnection.java:979)
          > > at java.net.URLConnection.getContent(URLConnection.java:581)
          > >
          > >OK, so fine - I figure that I'm new to this. The documentation for the
          > >URL
          > >class tells me there is another way around this. It says that rather
          > >then
          > >calling getContent() directly, I can open a stream on the URL and read
          > >from
          > >that, like so:
          > >
          > >URL content =
          >
          >servlet.getServletContext().getResource("/content/structure/scenario2resour
          c
          > >es.txt");
          > >FileInputStream fis = content.openStream();
          > >
          > >but when I do this I get the following different exception:
          > >
          > >java.lang.ClassCastException: weblogic.utils.zip.SafeZipFileInputStream^M
          > > at Utility.writeFileToOutput(Utility.java:134)^M
          > >
          > >Apparently this thing is trying to return a web-logic-specific stream
          > >(which
          > >is incompatible with an FileInputStream) - which I don't want to use
          > >or
          > >learn about since I want my stuff to work under other webservers.
          > >
          > >Can anyone tell me what I'm doing wrong? This should be simple.
          > >
          > >-john
          > >
          > >
          > >--
          > >John Hilgedick
          > >WisdomTools, Inc.
          > >[email protected]
          > >
          > >
          >

Need Help with Scrolling Problem

I have a JTree displayed in scrollpane. Based on search criterial I select the nodes where the search criteria is found. If the match is located off the screen further down into the tree, the node is highlighted but the scrollpane doesn't automatically scroll down to show it. Any help with this problem is appreciated.

Wow.. Thanks. I thought I would need some fancy code to handle this problem. scrollPathToVisible did it for me. Thanks.

Need help with a problem after cloning my HD....

I recently cloned my HD to a backup drive. I did an erase and install of Tiger on my original drive. I recently cloned everything back onto my original drive from my backup drive. Now when I go to boot up on my original drive, for the first time ever I must type a Username and Password to log on to the computer. Trouble with this is, I tried my username and password and it would not work. I double, triple, quadruple checked my spelling and tried different combinations just in case i was being stupid, NOPE. It won't let me log on to my main HD. Can anyone help with this?

Let me get this straight. You did
1: Cloned your original boot drive to a external - not a problem
(did you boot from the clone to check it out?, did you use cloning software or???)
2: You erased your original boot drive - ok no problem.
3: You then installed Tiger on your original boot drive - ok no problem there
4: But you cloned from your clone back onto your original, freshly installed Tiger drive?
Why did you do this?
Cloning copies the whole drive, all the little hidden stuff, copy protection etc.
That's why it's called a clone.
Did you mean to say you copied certain folders/files from the clone onto the new Tiger install on your original boot drive?
What folders/files was these?
You need to copy the contents of certain folders inside your User folder, not the folders themselves.
What software did you use to clone with?
Read my detailed instructions here
http://homepage.mac.com/hogfish/Personal6.html
http://homepage.mac.com/hogfish/Personal10.html

I need help with simple problems. im a student.

i'd like to be advanced with my studies so i will post questions.. i need help on how to answer. thank you.
1. create a java program that will evaluate if the value entered is a positive, negative, vowel, consonant and special characters.
im actually done with the positive and negative using if else statements.. i used an integer data type. now my question is how do conjoin the characters when i need to evaluate a vowel and a consonant. i cant use char either. please help. i dont know what to do yet.
2. create java program that will translate the input from numbers to words. e.g. input:123 output: one hundred twenty-three.
i have an idea to use a switch case statement. but i have no idea on how will i be able to do it. so if you guys can help me.. well then thankies..

Welcome to the Sun forums. First, please note that you have posted in the wrong forum. This forum is for topics related to Sun's JavaHelp product. You should post your questions in the New to Java forum.
As part of your learning, you will have to develop the ability to select an approach to a problem, create a design that reflects that approach, and then implement the design with code that you create.
So, it's inappropriate for us to take the problem statement that you have been given and short-circuit your learning process by giving you the implemented problem solution. We can comment on the individual questions that you may have, and point out problems and errors that we see in the code that you develop.
As a hint, when you are stuck, forget about Java and programming. Just start with a sheet of paper and a pencil, and figure out how to layout the task on paper. The consider how to translate that to programming.
If you have problems, post short example code that shows the problem, and explain your question clearly. We can't read minds.
Make sure you post code correctly so that it's not mangled by the forum software, and so that formatting is maintained. Select your typed or pasted code block and press the CODE button above the typing area.

I like many need help with a problem of burning cds

I am trying to burn a simple playlist to a memorex music cd-r. Every time I try a message pops up with the error code of 4261 and then pops out the cd. Any help will be very much appriciated as I am at my wits end with this problem. Thank you so very much!
Windows, Media Center PC

Place the PSU in and connect the 20 pins connector and the 4 pins connector will do.
You may also try swapping the RAMs with another one to test f the RAM is to be at fault.

Need help with Backup problems - anyone seen this before?

I am experiencing 2 primary problems:
1) When attempting a recent backup with HotSync on my desktop PC (Treo 700p, HotSync Manager v. 6.01, XP): I hadn't backed up for a few weeks, and this time it crashed sometime during the backup of the Calendar (and this behavior is repeated). So I then unchecked the backup of Calendar, but then it just hung on Contacts for about 15 minutes, so I realized it wasn't doing anything anymore (I have lots of contacts, but not not 15 minutes worth). At this point I gave up, but I obviously need to figure out how to make HotSync work again. Any ideas?
2) (not sure if this is the forum to address this): When using Backup Buddy v. 2.04 a couple of days ago, every time I tried to backup, it would get maybe 1/5th into the backup and crash and restart. I figured out in short order that Address.DB is what was causing the crash. [I tried to e-mail the file so I could examine it and save it, but just attaching it in SnapperMail made the device crash]. So I took the chance of deleting the Address.DB (as it seemed small and didn't appear to contain any backup information), and it looks like all of my information was retained. My question here is: two times since the initial problem, something has recreated Address.DB, which again causes the 700p to crash, so I have had to delete it again. So when is this file being (re)created, and what is the purpose of it?
An additional (minor) difficulty that I've had occur on a couple of occasions: After a recovery (where my BackupBuddy information was more current than my HotSync data), I restored, and all the calendar entries were double - 2 identical entries adjacent to one another. Has anyone seen this?
Thanks in advance -
B
Post relates to: Treo 700p (Verizon)

Sounds like the device has become corrupted.
Post relates to: None

Hey guys i really need help with this problem...

Hey guys how is everyone? I have a Soundblaster X-Fi XtremeMusic. and i am having a real annoying problem, here is how it all started. I took the time and dusted out my computer by using a can of air duster, and i think a little got on there and it turned into frost. Weird thing is it happened before and i never had this problem. I turn my computer on and crank the volume up i receive no sound what so ever. I know it has to work because i have a pair of DJ headset hooked into the jack, and i heard a little pop sound. And no audio, every last port on the card i cannot get no sound out of it except one of them, it's really annoying i hate this doing this and i have to hook my 5.1 using one jack just to get sound. And it doesnt sound good i have some really powerful 1,000 watt speakers with 2 amps. I know this is yet due to the fact i only have the lime jack in This is the only way it'll work. And i have a THX cable and it works sometime. I hope my soundcard isnt messed up. I really hope you guys can help me with this issue. I cannot contact creative cust service via email because i dont have my box no more, and my serial number is faded on the card (i think that was the serial)
I try to explain the best way i can describe it. Below is my System Specs.
<pre>Processor: AMD Athlon X3 425 @ 2.7GHz
Video Card: ATI HD 5770 1GB
Hard Drive:1TB Western Digital, 500GB Western Digital, 300GB Seagate (all SATA connections)
Heatsink: Zalman CNPS7000C-Cu
Power Supply: Antec 550 Watts True Power II
Sound Card: Creative Soundblaster XI-FI Xtreme Music
Motherboard: ASUS M4A79XTD EVO
DVD Drives x2. Plextor DVD-RW/DL/ Sony DVD-ROM Drive via PATA connections</pre> Thanks in advance hope you all have a splended weekend.

Hello
Thank you for your help but unfortunately still have troubles with the soundcard.
I upgraded my system to
RAM: Corsair Vengeance LP 16GB DDR3
Processor: AMD Phenom II X6 1090T Processor, Black Edition 3.3GHz
Video Card: Sapphire 100314-3L Radeon HD 6870 1GB
Hard Drive: 1TB Western Digital, 500GB Western Digital, 300GB Seagate (all SATA connections)
Heatsink: Zalman CNPS7000C-Cu
Power Supply: Corsair TX850W 850 Watt SLI/Crossfire Certified
Sound Card: Creative Labs Soundblaster X-FI Titanium Fatal1ty Professional (getting this soon)
Motherboard: ASUS M4A79XTD EVO (BIOS: 2102)
DVD Drive(s): Plextor DVD-RW/DL/ Sony DVD-ROM Drive via PATA connections
And i still run into problems i think its a matter of a hardware issue. The plugs dont really work
only one does (where lime goes in) And the bass has toned down as well... Isn't as powerful
as it used to be, so my best be is to upgrade to Creative Labs Soundblaster X-FI Titanium Fatal1ty Professional
Thats my only hope...
But again thank you for your help

Need Help with Sound Recording

Hi,
I'm a Comp. Sys. Eng. student in my final year and I've been trying to record sound with java for a couple of months now and its driving me stupid. I've looked around on just about every java source site I could find and have found many similar examples of sound recording, none seem to work on my machine. The problem is that I keep on getting either IOExceptions, or empty .wav files (as in the code below). The code included below is a shortened and modified version of some code I got from jsresources.org, the full link is http://www.jsresources.org/examples/AudioCommon.java.html.
I have not had any experience with multimedia in java before.
Can somebody please tell me what is wrong with this code? or is my java environment to blame?
Am I declaring my AudioFormat correctly?
Am I controlling my AudioInputStream correctly?
I'm using JDK1.4 in eclipse. Any help would be greatly appreciated.
* AudioCommon.java
* This file is part of jsresources.org
* Copyright (c) 1999 - 2001 by Matthias Pfisterer
* All rights reserved.
import java.io.File;
import java.io.IOException;
import javax.sound.sampled.AudioFileFormat;
import javax.sound.sampled.AudioFormat;
import javax.sound.sampled.AudioSystem;
import javax.sound.sampled.DataLine;
import javax.sound.sampled.Line;
import javax.sound.sampled.LineUnavailableException;
import javax.sound.sampled.Mixer;
import javax.sound.sampled.SourceDataLine;
import javax.sound.sampled.TargetDataLine;
public class AudioCommon
     private static boolean          DEBUG = true;
     public static void main(String Args[]){
          AudioFormat audioFormat = new AudioFormat(AudioFormat.Encoding.PCM_SIGNED,
44100.0F, 16, 2, 4, 44100.0F, false);
          TargetDataLine dataLine = getTargetDataLine("AK5370 ",
                    audioFormat,
                    5);
          File     outputFile = new File("C:\\testRecorder.wav");
          try{
               outputFile.createNewFile();
          } catch(IOException ioe){
               System.err.println("Couldn't create a new file: " + ioe);
          AudioFileFormat.Type     targetType = AudioFileFormat.Type.WAVE;
          SimpleAudioRecorder     recorder = new SimpleAudioRecorder(
                    dataLine,
                    targetType,
                    outputFile);
          out("Press ENTER to start the recording.");
          try
               System.in.read();
          catch (IOException e)
               e.printStackTrace();
          recorder.start();
          out("Recording...");
          long millis = System.currentTimeMillis();
          while(System.currentTimeMillis() < millis + 5000);
          recorder.stopRecording();
          out("Recording stopped.");
          if(outputFile.exists()){
               System.out.println("File Exists.");
          } else {
               System.err.println("File does not Exist.");
          System.exit(0);
     public static TargetDataLine getTargetDataLine(String strMixerName,
                                   AudioFormat audioFormat,
                                   int nBufferSize)
               Asking for a line is a rather tricky thing.
               We have to construct an Info object that specifies
               the desired properties for the line.
               First, we have to say which kind of line we want. The
               possibilities are: SourceDataLine (for playback), Clip
               (for repeated playback)     and TargetDataLine (for
               recording).
               Here, we want to do normal capture, so we ask for
               a TargetDataLine.
               Then, we have to pass an AudioFormat object, so that
               the Line knows which format the data passed to it
               will have.
               Furthermore, we can give Java Sound a hint about how
               big the internal buffer for the line should be. This
               isn't used here, signaling that we
               don't care about the exact size. Java Sound will use
               some default value for the buffer size.
          TargetDataLine     targetDataLine = null;
          DataLine.Info     info = new DataLine.Info(TargetDataLine.class,
                                   audioFormat, nBufferSize);
          try
               if (strMixerName != null)
                    Mixer.Info     mixerInfo = getMixerInfo(strMixerName);
                    if (mixerInfo == null)
                         out("AudioCommon.getTargetDataLine(): mixer not found: " + strMixerName);
                         return null;
                    Mixer     mixer = AudioSystem.getMixer(mixerInfo);
                    targetDataLine = (TargetDataLine) mixer.getLine(info);
               else
                    if (DEBUG) { out("AudioCommon.getTargetDataLine(): using default mixer"); }
                    targetDataLine = (TargetDataLine) AudioSystem.getLine(info);
               *     The line is there, but it is not yet ready to
               *     receive audio data. We have to open the line.
               if (DEBUG) { out("AudioCommon.getTargetDataLine(): opening line..."); }
               targetDataLine.open(audioFormat, nBufferSize);
               if (DEBUG) { out("AudioCommon.getTargetDataLine(): opened line"); }
          catch (LineUnavailableException e)
               if (DEBUG) { e.printStackTrace(); }
          catch (Exception e)
               if (DEBUG) { e.printStackTrace(); }
               if (DEBUG) { out("AudioCommon.getTargetDataLine(): returning line: " + targetDataLine); }
          return targetDataLine;
EOF<<<<<<<<<<<<<<<<import java.io.File;
import javax.sound.sampled.*;
class SimpleAudioRecorder extends Thread{
     private TargetDataLine          m_line;
     private AudioFileFormat.Type     m_targetType;
     private AudioInputStream     m_audioInputStream;
     private File               m_outputFile;
     public SimpleAudioRecorder(TargetDataLine line,
          AudioFileFormat.Type targetType,
          File file)
     m_line = line;
     m_audioInputStream = new AudioInputStream(line);
     m_targetType = targetType;
     m_outputFile = file;
     public void stopRecording(){
          m_line.stop();
          m_line.flush();
          m_line.close();
EOF<<<<<<<<<<<<<<<<

your asking the quest in the jmf forum and using some old type of handling the media
sun has given you very good frame work which reduce lot of coding and makes the life easy
then why are you going to old way.
first go and read jmf tutorial and implement your self dont go to get the code which some other people have written. do your self . you have energy to do. why are depending on others
read well tutorial and design. you will win i am sure
jmf makes life easy

Need help with video problems

Hi!
Back in May I was having problems with video on my Mac. I was helped by this site and am hoping for more help. I downloaded the realaudio, but was still having problems. I assumed because I was on dial up. It was so slow. It would take forever to load and then play for a few minutes then need to load some more. I now have DSL and was looking forward to kissing the video problems good-bye! My new problem is that when I try to watch or listen to anything like innertube it "stutters." Is there something else I should be doing? How can I fix this problem?

With those specs you should be absolutely fine. I would suggest that you update to 10.4.10 at least (download the full Combo updater). Once you are on that:
These are the downloads and the settings you need in order to view/hear pretty much everything that the net can throw at you: The setup described below has proved repeatedly successful on both PPC and Intel macs, but nothing in life carries a guarantee!
It is known to work in the great majority of cases with Safari 3.0.4, QT 7.3 and OS 10.4.11. (If you are running Leopard, ensure that all plug-ins have been updated for OS 10.5)
Assuming you already run Tiger versions OS 10.4.9 or above (this has not yet been verified with Leopard) and have Quicktime 7.2 or above, and are using Safari 2 or 3, download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
RealPlayer 10 for Mac from http://forms.real.com/real/player/blackjack.html?platform2=Mac%20OS%20X&product= RealPlayer%2010&proc=g3&lang=&show_list=0&src=macjack
Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
Perian from http://perian.org/
Adobe FlashPlayer from http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
(You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. This: http://www.macworld.co.uk/news/index.cfm?email&NewsID=19845 may also interest you.)
In Quicktime Preferences, under advanced, UNcheck Enable Flash, and under Mime settings/Miscellananeous only check Quicktime HTML (QHTM).
See also the very informative post from QuickTimeKirk dated Dec 3, 2007 in this thread: http://discussions.apple.com/thread.jspa?threadID=1268489&tstart=0
In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them).
Now go to Safari Preferences/Security, and tick the boxes under Web Content (all 4 of them).
Lastly open Audio Midi Setup (which you will find in the Utilities Folder of your Applications Folder) and click on Audio Devices. Make sure that both Audio Input and Audio Output, under Format, are set to 44100 Hz.
Important: Now repair permissions and restart.
The world should now be your oyster!
You should also consider having the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.

Need help with speaker problem

hi im having a problem with my speakers. ive used the green cord and i have a HDMI too my vidio card. ive tried everything to get the sound to work but i dont know whats wrong with it..

Hello @james1126,
I understand that you are not able to get sound from your desktop computer using a green cord, as well as an HDMI cord, and I would be happy to assist you in this matter!
To further diagnose this issue, I recommend following the steps in this document on Troubleshooting HDMI Display and Sound Issues, as well as No Sound from the Speakers (Windows 8). This should help enable the audio-out functions on your computer to be heard on your speakers.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Need help for sound problem in Compaq Presario cq40-142tu

i am using cq40-142tu and I am downgrading it from Vista to Windows XP Service Pack 3, got everything working except the audio (IDT High Definition Audio Codec).i installed UAA and it work fine, Unfortunately, IDT Def Audio gone after rebooting. can anyone help??

v3614 sound gone
03-21-2010 01:35 AM
hi, my laptop just sent to hp service center to maintain few weeks ago.. coz of laptop cannot on...
now i'm facing another problem after laptop has been sent back to me that the audio sound was disappear automatically...
starting is just need to restart the laptop then sound will come back... but this time even getting few times restart... still didn't have sound..
at control panel audio sound.. it's just write that "no audio sound"..
device manager i have check there is no miss driver for audio sound.
i have try to install the software from the support driver... cannot install and ERROR..
Another things i found out that.. the laptop is using for conenxant audio sound.. when the laptop didnt have any sound.. the control panel and device manager din have conenxant audio sound device... seems like the software was disappear...
i have post the same problem.. but din have any reply...
our problem is same... now no more sound pop out again even after few times to restart the windows....

Need help with G4 problem

Months ago I have a problem on my G4 MDD which intermittently shuts down after putting it to sleep. Now some new problems are coming out. First one I noticed is that sometimes even the power switch light would turn off even though the computer is still on. I can still use the internet and such but noticed that when I need to digitized video footage using FCE there would be some noise on the video which leads me to conclude that the power is unstable. Am I correct in this? 2nd problem is sometimes it will not even power up unless I either pull the plug and plug it in again or open the side of the computer. Now regarding opening the side of the computer, I noticed that if I powered it up with the side door opened and try to close it the computer will shut down. Sometimes I managed to close the door and it will stay on with out a problem. Right now I just leave the side door open and so far power seems to be ok for 72 hours. So is this a logic board problem or a connection problem between the psu and the logic board?

I'm leaning towards Tom's opinion of heat, too. Modern Macs have thermal sensors that shut down the computer if key temps rise too high. Dual processor MDDs run especially hot, as do MDDs with both slots in the front drive bay occupied.
The two cheap things to do first are a) give the inside a cleaning, focusing on the main fan and its housing, and b) check your workspace to ensure that there is room around the computer for intake and exhaust air.
The primary air intake is not the four molded "ducts" on the front but rather the area at the bottom of the front panel below them. Keep that area clear--it's best not to put "bottom breather" computers like the MDD on the floor where that can pull in even more dirt. Crowding the exhaust in the back can run up temps, too. Try to position the tower so nothing is within 8 inches of the back,

Need help with Sound Problem

Similar Messages

Maybe you are looking for