Need help with speed dial on Continuum

I've read the book which isn't very helpful for a new user. Can anyone help me set up speed dial on the Continuum?

Hi jackiejunque,
Welcome to the wonderful world of Smartphones! We do offer in-store or online Smartphone Workshops to help customers get acclimated with their devices. Additionally, here are the steps on how to add or remove speed dials:
Add Speed dial
From the main screen tap Phone
Tap Menu
Tap Speed dial settings
Remove Speed dial
From the main screen tap Phone
Tap Menu
Tap Speed dial settings
Tap Menu
Tap Remove
Select the contact to remove from speed dials and press the "Red X" icon to remove
I hope this information is helpful as you begin to explore your new device. Please let me know if you have any additional questions.
Thank you,

Similar Messages

Need help with speed remapping

So here is my question. (check pic below to see timeline)
I'm working on a timeline and I have a clip somewhere in the middle of this timeline. Now I've put the two markers which close off the area of the clip that I want in slow-motion. And then I drag the rubberband now to 50%. This causes the clip to obviously become longer.
But the problem is that it doesn't push the clip that comes afterwards, it just sort of submerges and I lose a part of the clip that I put into slow-mo.
http://gyazo.com/0cce5ab07e22897f21a25e3308a9cbb5.png Here's a picture of my timeline.
So my question is how can I make it so that the clip after is pushed forward automatically?
I know how to fix this problem with some dragging and pulling, but I want to become as efficient as I can and don't get into any bad habits.
Thanks!

If all you want to do is simply slow down or speed up a clip, use the Speed/Duration settings--it's probably the simplest way to induce a speed change. This is a constant speed change, which you can also do with Time Remapping--which is what I think you've been doing.
The benefit of Time Remapping is that it allows for variable speed changes within a single instance of a clip. Say for example you want your clip to start at 100% speed, slow down immediately to 25%, and then speed up immediately to 200%. You can do this with Speed/Duration, simply by razoring the clip at the specific points where you want the speed change to occur, and then altering the Speed/Duration setting for that instance of the clip. With Time Remapping, not only can you do this without having to chop up the clip, but you can also create "ramps" from one speed to another--hence the variable speed aspect. You can even freeze a clip or reverse it, all without editing the clip into smaller pieces. This can result in a much smoother effect, but it might not always be what you're after. Time Remapping does have a bit of a learning curve, but it really is the more powerful option of the two. You just have to decide which is better for your purposes.
An additional benefit, and I might be wrong on this, but I believe that using the Time Remapping function results in (theoretically) a higher quality speed change effect due to a different algorithm or some-such. It uses some different techniques to generate the interpolated frames created in a speed change, that should look smoother than if they were done with the Speed/Duration command.
Hope the helps a bit.

Need help with n8 dialer and voicemail screens - e...

N8 questions. In this scenario, you call your VM and as y ou are listening to the messages, you need to open the dialer to delete/save messages, then have to close the dialer and then choose end call. There are 6 steps (open dialer, call, open dialer again, save/delete the vm, close the dialer and then end the call).
Anyone know how to do this more efficiently? Can you end the call while still in the dialer? Is there a way to add a hang up feature to the dialer. No offence, but this kind of mult-step stuff is annoying and doesn't exist on apple or android. thoughts?

Using the original (un-modified) SpryMenuBarVertical.css as our foundation, I added the following style rules
<style>
ul.MenuBarVertical {
     width: 145px;
     border: none;
ul.MenuBarVertical li {
     text-align: center;
     width: 145px;
ul.MenuBarVertical a {
     background-color: #EB071C;
@media screen, projection {
     ul.MenuBarVertical li.MenuBarItemIE      {
          background: #EB071C;
</style>
In passing, have a look here http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.dnawebcreations.com%2Fjump_in dex.html. This shows the improper use of the ol element.
Gramps

I need help with speed of deleting do noy know how to fix

am not very good at this, need help, deleting button is so slow it is not working as before

Check your mails are SYNCed properly or not. otherwise reSYNC your emails and check it out.
Try in safemode also
*https://support.mozilla.org/en-US/kb/safe-mode

Broadband upgrade, need help with speed please

Hi all,
I recently upgraded from a very old broadband package with an old router from the 1960's to the 'upto 20meg' service, with the bloke on the phone advising we should receive about 17meg as we are close to the exchange (Worcester Park, Surrey). So when the new kit arrived the speed jumped from 2megs to about 4ish and it's now settled on about 5 after 10 days.
I've posted the stats below as i'm after some advice really because I can't make sense of it. Am I missing something here or should I be getting faster speeds?
Cheers

Hi welcometo the forum
You appear to have a stable connection however your connection speed is low for your line attenuation are you connected to the master socket ? Or an extension if you can connect to the test socket Located at the rear of the removable front plate of the master socket and recheck the hub stats and speedtest this wil eliminate any faults with your internal wiring also are you connecting the hub to your pc by wireless or ethernet cable if wireless could you try connecting by cable and again post the speed test results this will eliminate any speed losses due to wireless interference Please try these first then we can advise further
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Need apps: BEST speed dialer favorite, BEST video viewer, BEST list maker..

Need apps: BEST speed dialer favorite (I have to turn on/off and reset hourly to get email so I can't keep favorites in my phone area), BEST video viewer (short form or longer form) AND BEST list maker that allows sync with online component (so I can keep a list on iPhone and/or online when not on iPhone).
Thanks!

Ah yeah I know that. I am asking users on this board what they consider the "BEST" in a specific category. The app store is not very user friendly (too many clicks), plus the categories are vague and contain a mish-mosh of stuffs. I have downloaded several apps (free and paid) for other needs—but really would like suggestions on those I have yet to download.
BTW your response was rather lame and not very helpful.

Need help with Airport Express and so on.

Ok so my main problem before getting into what I need help with here is that our MacBooks and now my iPhone 6 plus isn't staying online. Keep getting booted off and then I either have to select the network again or it will eventually go back on. If anyone has a solution or so please feel free to answer that as well. I'm running on Roadrunner with a Netgear 600 wireless router and a motorola modem. Both of which I'll leave the link to below for a better look.
My Main Question: So I'm looking at a new wireless router mainly and possibly a new modem. I know Apple products are trustworthy but how good is the Airport Express and other Airport products. Also what is the Maximum speed and Maximum data speed for the cheapest express station and if anyone knows the speeds of the other devices it would be greatly appreciated.

DSL Router to Netgear 5-port Switch and I used the switch to connect to Airport Extreme, TV, Blue-Ray DVD player and DirecTV Receiver.
The AirPort Extreme base station (AEBS) is a router so it will do what you need.
You need to reconfigure your setup. Connect the WAN port of the AEBS to the DSL router. Then connect the Netgear switch to one of the LAN ports on the AEBS. The AEBS will properly share the connection.

Need help with Berkeley XML DB Performance

We need help with maximizing performance of our use of Berkeley XML DB. I am filling most of the 29 part question as listed by Oracle's BDB team.
Berkeley DB XML Performance Questionnaire
1. Describe the Performance area that you are measuring? What is the
current performance? What are your performance goals you hope to
achieve?
We are measuring the performance while loading a document during
web application startup. It is currently taking 10-12 seconds when
only one user is on the system. We are trying to do some testing to
get the load time when several users are on the system.
We would like the load time to be 5 seconds or less.
2. What Berkeley DB XML Version? Any optional configuration flags
specified? Are you running with any special patches? Please specify?
dbxml 2.4.13. No special patches.
3. What Berkeley DB Version? Any optional configuration flags
specified? Are you running with any special patches? Please Specify.
bdb 4.6.21. No special patches.
4. Processor name, speed and chipset?
Intel Xeon CPU 5150 2.66GHz
5. Operating System and Version?
Red Hat Enterprise Linux Relase 4 Update 6
6. Disk Drive Type and speed?
Don't have that information
7. File System Type? (such as EXT2, NTFS, Reiser)
EXT3
8. Physical Memory Available?
4GB
9. Are you using Replication (HA) with Berkeley DB XML? If so, please
describe the network you are using, and the number of Replica’s.
No
10. Are you using a Remote Filesystem (NFS) ? If so, for which
Berkeley DB XML/DB files?
No
11. What type of mutexes do you have configured? Did you specify
–with-mutex=? Specify what you find inn your config.log, search
for db_cv_mutex?
None. Did not specify -with-mutex during bdb compilation
12. Which API are you using (C++, Java, Perl, PHP, Python, other) ?
Which compiler and version?
Java 1.5
13. If you are using an Application Server or Web Server, please
provide the name and version?
Oracle Appication Server 10.1.3.4.0
14. Please provide your exact Environment Configuration Flags (include
anything specified in you DB_CONFIG file)
Default.
15. Please provide your Container Configuration Flags?
final EnvironmentConfig envConf = new EnvironmentConfig();
envConf.setAllowCreate(true); // If the environment does not
// exist, create it.
envConf.setInitializeCache(true); // Turn on the shared memory
// region.
envConf.setInitializeLocking(true); // Turn on the locking subsystem.
envConf.setInitializeLogging(true); // Turn on the logging subsystem.
envConf.setTransactional(true); // Turn on the transactional
// subsystem.
envConf.setLockDetectMode(LockDetectMode.MINWRITE);
envConf.setThreaded(true);
envConf.setErrorStream(System.err);
envConf.setCacheSize(1024*1024*64);
envConf.setMaxLockers(2000);
envConf.setMaxLocks(2000);
envConf.setMaxLockObjects(2000);
envConf.setTxnMaxActive(200);
envConf.setTxnWriteNoSync(true);
envConf.setMaxMutexes(40000);
16. How many XML Containers do you have? For each one please specify:
One.
1. The Container Configuration Flags
          XmlContainerConfig xmlContainerConfig = new XmlContainerConfig();
          xmlContainerConfig.setTransactional(true);
xmlContainerConfig.setIndexNodes(true);
xmlContainerConfig.setReadUncommitted(true);
2. How many documents?
Everytime the user logs in, the current xml document is loaded from
a oracle database table and put it in the Berkeley XML DB.
The documents get deleted from XML DB when the Oracle application
server container is stopped.
The number of documents should start with zero initially and it
will grow with every login.
3. What type (node or wholedoc)?
Node
4. Please indicate the minimum, maximum and average size of
documents?
The minimum is about 2MB and the maximum could 20MB. The average
mostly about 5MB.
5. Are you using document data? If so please describe how?
We are using document data only to save changes made
to the application data in a web application. The final save goes
to the relational database. Berkeley XML DB is just used to store
temporary data since going to the relational database for each change
will cause severe performance issues.
17. Please describe the shape of one of your typical documents? Please
do this by sending us a skeleton XML document.
Due to the sensitive nature of the data, I can provide XML schema instead.
18. What is the rate of document insertion/update required or
expected? Are you doing partial node updates (via XmlModify) or
replacing the document?
The document is inserted during user login. Any change made to the application
data grid or other data components gets saved in Berkeley DB. We also have
an automatic save every two minutes. The final save from the application
gets saved in a relational database.
19. What is the query rate required/expected?
Users will not be entering data rapidly. There will be lot of think time
before the users enter/modify data in the web application. This is a pilot
project but when we go live with this application, we will expect 25 users
at the same time.
20. XQuery -- supply some sample queries
1. Please provide the Query Plan
2. Are you using DBXML_INDEX_NODES?
Yes.
3. Display the indices you have defined for the specific query.
     XmlIndexSpecification spec = container.getIndexSpecification();
     // ids
     spec.addIndex("", "id", XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
     spec.addIndex("", "idref", XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
     // index to cover AttributeValue/Description
     spec.addIndex("", "Description", XmlIndexSpecification.PATH_EDGE | XmlIndexSpecification.NODE_ELEMENT | XmlIndexSpecification.KEY_SUBSTRING, XmlValue.STRING);
     // cover AttributeValue/@value
     spec.addIndex("", "value", XmlIndexSpecification.PATH_EDGE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
     // item attribute values
     spec.addIndex("", "type", XmlIndexSpecification.PATH_EDGE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
     // default index
     spec.addDefaultIndex(XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ELEMENT | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
     spec.addDefaultIndex(XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
     // save the spec to the container
     XmlUpdateContext uc = xmlManager.createUpdateContext();
     container.setIndexSpecification(spec, uc);
4. If this is a large query, please consider sending a smaller
query (and query plan) that demonstrates the problem.
21. Are you running with Transactions? If so please provide any
transactions flags you specify with any API calls.
Yes. READ_UNCOMMITED in some and READ_COMMITTED in other transactions.
22. If your application is transactional, are your log files stored on
the same disk as your containers/databases?
Yes.
23. Do you use AUTO_COMMIT?
     No.
24. Please list any non-transactional operations performed?
No.
25. How many threads of control are running? How many threads in read
only mode? How many threads are updating?
We use Berkeley XML DB within the context of a struts web application.
Each user logged into the web application will be running a bdb transactoin
within the context of a struts action thread.
26. Please include a paragraph describing the performance measurements
you have made. Please specifically list any Berkeley DB operations
where the performance is currently insufficient.
We are clocking 10-12 seconds of loading a document from dbd when
five users are on the system.
getContainer().getDocument(documentName);
27. What performance level do you hope to achieve?
We would like to get less than 5 seconds when 25 users are on the system.
28. Please send us the output of the following db_stat utility commands
after your application has been running under "normal" load for some
period of time:
% db_stat -h database environment -c
% db_stat -h database environment -l
% db_stat -h database environment -m
% db_stat -h database environment -r
% db_stat -h database environment -t
(These commands require the db_stat utility access a shared database
environment. If your application has a private environment, please
remove the DB_PRIVATE flag used when the environment is created, so
you can obtain these measurements. If removing the DB_PRIVATE flag
is not possible, let us know and we can discuss alternatives with
you.)
If your application has periods of "good" and "bad" performance,
please run the above list of commands several times, during both
good and bad periods, and additionally specify the -Z flags (so
the output of each command isn't cumulative).
When possible, please run basic system performance reporting tools
during the time you are measuring the application's performance.
For example, on UNIX systems, the vmstat and iostat utilities are
good choices.
Will give this information soon.
29. Are there any other significant applications running on this
system? Are you using Berkeley DB outside of Berkeley DB XML?
Please describe the application?
No to the first two questions.
The web application is an online review of test questions. The users
login and then review the items one by one. The relational database
holds the data in xml. During application load, the application
retrieves the xml and then saves it to bdb. While the user
is making changes to the data in the application, it writes those
changes to bdb. Finally when the user hits the SAVE button, the data
gets saved to the relational database. We also have an automatic save
every two minues, which saves bdb xml data and saves it to relational
database.
Thanks,
Madhav
[email protected]

Could it be that you simply do not have set up indexes to support your query? If so, you could do some basic testing using the dbxml shell:
milu@colinux:~/xpg > dbxml -h ~/dbenv
Joined existing environment
dbxml> setverbose 7 2
dbxml> open tv.dbxml
dbxml> listIndexes
dbxml> query     { collection()[//@date-tip]/*[@chID = ('ard','zdf')] (: example :) }
dbxml> queryplan { collection()[//@date-tip]/*[@chID = ('ard','zdf')] (: example :) }Verbosity will make the engine display some (rather cryptic) information on index usage. I can't remember where the output is explained; my feeling is that "V(...)" means the index is being used (which is good), but that observation may not be accurate. Note that some details in the setVerbose command could differ, as I'm using 2.4.16 while you're using 2.4.13.
Also, take a look at the query plan. You can post it here and some people will be able to diagnose it.
Michael Ludwig

Need help with my Pioneer dvd-rw dvr-115d. HLEP!!

Hello i need help with my G4, i havent been useing it for a while and i started using it again. As i was trying to burn a DVD it didnt read my cd at all even if i put a DVD in there it dont read it just come right back out.. on my mac it shows that is there but not reading . what can i do????!!! i need help with this..
PIONEER DVD-RW DVR-115D:
Firmware Revision:          1.18
Interconnect:          ATAPI
Burn Support:          Yes (Vendor Supported Drive)
Profile Path:          /Library/DiscRecording/DeviceProfiles/PatchBurn-pioneerdvdrwdvr115d.drprof ile
Cache:          2000 KB
Reads DVD:          Yes
CD-Write:          -R, -RW
DVD-Write:          -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:          Insert media and refresh to show available burn speeds
this is what it say in the system profiler.
Power PC Mac os x 10.5.8

The new user account didn't work?
Or, the firmware flash didn't work?
I would try reconnecting the data ribbon. It is cramped and difficult to get to, but it may be some corrosion or a poor connection causing the issue.
It's worth a try, as the DVR-115 is a good drive. They don't make them any more........
You can find an optical drive installation video (on the following page) to help you with your efforts:
http://eshop.macsales.com/installvideos/

HOW DO YOU GUYS DEAL WITH APPLE.. SO CONFUSING...NEED HELP WITH SPECS FOR PURCHASE OF IMAC 21.5

Hi guys, been reading your forums, blogposts, etc and am getting more confused. I'm just a video girl trying to produce meaningful content through web videos for small to mid sized businesses and want to come over from the dark side.
Good news,, I dont need a super giant system, I do simple editing for web videos, minimal graphics, no motion graphics, no animation etc. currently using CS4, will probably end up with 5.5.
I want to get imac 21.5 or 27 if i have to.. So here's the question we all have,,, what do I really need besides an Apple fairy godmother to figure this crazy stuff out?????
I want to be able to have firewire add on, but the rest is what I need help with. So i've been looking at cs6 specs, even though im not there yet, eventually will be,, so just need to run cs4 now and build from there. I also want to eventually move to final cut down the road so I want imac able to upgrade to final cut.
WHAT DO I REALLY NEED MINIMALLY FOR NOW? WHAT CAN I GET LATER IF i CHOOSE TO DO MORE AND NEED MORE POWER?
cs6:
Multicore Intel processor with 64-bit support
Mac OS X v10.6.8, v10.7, or v10.8**
4GB of RAM (8GB recommended)
4GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
Additional disk space required for preview files and other working files (10GB recommended)
1280x900 display
7200 RPM hard drive (multiple fast disk drives, preferably RAID 0 configured, recommended)
OpenGL 2.0–capable system
DVD-ROM drive compatible with dual-layer DVDs (SuperDrive for burning DVDs; Blu-ray burner for creating Blu-ray Disc media)
QuickTime 7.6.6 software required for QuickTime features
Optional: Adobe-certified GPU card for GPU-accelerated performance
Any responses would be great. I know you guys are busy answering the really high end tech questions

All the current iMac models (both 21.5" and 27" with OS X Mt. Lion 10.8) will run CS4, 5.5 and 6 just fine. They will also run Final Cut Pro X just fine. Ditto for most any application you may want to use.
Below are some notes (specific to your apparent requirements) that may help you with your purchase decision:
Notes on purchasing a 21.5" iMac
All 21.5" iMacs come with 8GB RAM but you cannot add more later. I strongly suggest getting the maximum RAM (16GB) when you order the iMac.
The basic hard drive is a 1TB 5400rpm drive. It will work fine with Adobe CS but you will probably want the added speed of the optional 1TB Fusion drive for better performance. Some people will recommend/argue for one of the optional SSD drives instead, but they are very expensive and still only come in relatively small capacities - I don't recommend the SSD drives. Get the Fusion drive and spend any extra money on a good external hard drive for backup and/or extra storage instead of an SSD.
Notes on purchasing a 27" iMac
All 27" iMacs come with 8GB RAM and you can add more later, up to 32GB
The basic hard drive is a 1TB 7200rpm drive - it will be fine with Adobe CS. There are upgrade options to a 3TB 7200rpm drive or a 1TB or 3TB fusion drive - these will be fine also. There are also SSD drive options, but I do not recommend them. (Same comments as above.)
Notes on all the current iMacs
iMacs no longer come with built-in CD/DVD drives. If you need one, you will need to purchase the Apple Superdrive accessory drive ($79)
All of the iMac graphic processors (GPU's) are compatible with Adobe CS 4, 5.5, 6
It is very difficult to impossible to change or upgrade the hard drive later on, so don't buy low-end thinking you can add a better internal hard drive later.
Be aware that Macs always come with the latest (most recent) version of OS X. And OS X Mavericks (10.9) is due to be released soon (in the next month or two). There is no guarantee that the older Adobe CS 4 or 5.5 versions will run on OS X Mavericks. If you cannot upgrade to CS 6 in the near future, you may want to purchase now rather than after OS X Mavericks is released.
For what it's worth, I'd recommend the 27" iMac if your budget can afford it. You will appreciate the larger screen size and added capabilities over the years you will use the computer.

Need help with a terminal command

Ever since Lion, or maybe even earlier, I am fighting a losing battle against memory leaks on my MacBook Pro. Safari for example takes over time 2GB+ for just 2 or 3 tabs open with almost no extensions active. Really strange.
Someone told me about the "purge" command in Terminal to free some of the sequestered memory, so I am doing this a few times a day to be able to use Photoshop, Keynote, Premiere and other stuff concurrently without opening and closing apps like I did 10 or 15 years ago, remember those days?
So here are my 2 questions:
Will this frequent "purge" command harm anything in the long run?
If no, is it possible to automate this "purge" Terminal action somehow? Maybe a desktop icon to click, or fully automated? I am a designer, not a coder, so I would need help with that.
Thank you for your input!
Model Name:          MacBook Pro
Model Identifier:          MacBookPro8,2
Processor Name:          Intel Core i7
Processor Speed:          2.3 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          8 MB
Memory:          8 GB
Boot ROM Version:          MBP81.0047.B27

Hello, do any modifier keys work, like Optio/alt?
Could you have Firmware password protection in Mac OS X ...
http://support.apple.com/kb/HT1352
It would block usage of all the startup keys, like C, N, T, D, CMD+s, CMD+Option+p+r, CMD +v, Option, and Shift, as well as booting from anything but the Hard Drive.
Force Removing Password Protection
1) Add or remove DIMMs to change the total amount of RAM in the computer.
2) Then, the PRAM must be reset 3 times. (Command + Option + P + R).
http://www.securemac.com/openfirmwarepasswordprotection.php

Need Help with a Flash Web Project

Hello, everyone. I am trying to use Flash to make a two-step
system. I want the flash document to, first, allow a person to
upload multiple image files and then, second, for the flash
document be able to create a slideshow with the uploaded images and
fade in and out from each image until the slideshow is over. I want
it to be where the flash document creates its own slideshow with
the images that are uploaded in the first step that I mentioned. I
want it to do it completely on its own so I need to know how to
give it the proper AI so that it can do this task.
So, are there any tips that anyone has on how to do this? Can
anyone tell me exactly how to do this? I really need help with this
for my new website project. Thanks in advance, everyone!

The problem with the text not appearing at all has to do with you setting the alpha of the movieclip to 0%. Not within the movieclip, but the movieclip itself. The same for the xray graphic, except you have that as a graphic symbol rather than a movieclip. To have that play while inhabiting one frame you'll need to change it to a movieclip symbol.
To get the text to play after the blinds (just a minor critique, I'd speed up the blinds), you will want to add some code in the frame where you added the stop in the blinds animation. You will also need to assign instance names for the text movieclips in the properties panel, as well as place a stop(); in their first frames (inside).
Let's say you name them upperText and lowerText. Then the code you'd add at the end of the blinds animation (in the stop frame) would be...
_parent.upperText.play();
_parent.lowerText.play();
The "_parent" portion of that is used to target the timeline that is containing the item making the command, basically meaning it's the guy inside the blinds telling the guy outside the blinds to do something.
You'll probably want to add stops to the ends of the text animations as well.
If you want to have the first text trigger the second text, then you'd take that second line above and place it in the last frame of the first text animation instead of the blinds animation.
Note, on occasion, undeterminably, that code above doesn't work for some odd reason... the animation plays to the next frame and stops... so if you run into that, just put a play(); in the second frame to help push it along.
PS GotoandPlay would actually be gotoAndPlay, and for the code above you could substitute play(); with gotoAndPlay(2);

I have a "Contact" organization issue I need help with. I organize multiple customers under their account affiliation. I place the people with their contact info under each account name by their dept/role in the notes section of their account. I am l

I have a "Contact" organization issue I need help with. I organize multiple customers under their account affiliation. I place the people with their contact info under each account name by their dept/role in the notes section of their account. I am looking to be able to directly dial / email from this info in yet notes section located within a contact. On Blackberry, the notes area entered in a contact can connect directly but on the iPhone those numbers/emails are inactive. I am trying to avoid having to create each of these individuals as a separate contact and keep them under their account affiliation. It is easier to find them. This does not seem like that complicated of a request and hoping someone can tell me how or share an app that will enable the "notes" within a contact be "active". Hope this makes sense.

I seem to recall that this question has been asked before and I'm pretty sure that the answer is that you can't do what you want to do with the native contact app. However, there are lots of contact apps out there that pull from the built app's data but have other features. Perhaps one of them would meet your needs.

I need help with errorCode.ULS3001

I need help with errorCode.ULS3001I wanted to unlock it, but it always gives me the same error, I need my phone to be unlocked as soon as possible. what can I do? ...
The test is from multiple computers "Error: Sorry, we have technical difficulties with our network at this time. Please try again later. If the problem persists, try to delete the cache and cookies from your computer. Questions? Call us at 800.331.0500 or dial 611 from your mobile phone from AT & T. (errorCode.ULS3001)"

DId you try calling?

Need help with ram on bootcamp

hey guys i need help with getting more ram on the pc side of bootcamp.
it says i have 1.99 of ram on the pc side
then on the mac i got this
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 4 GB
wanting to know how to get more ram over to boot camp

Rodney:
You cannot physically or via software add/move RAM from OSx side to Windows side. This is because you run Leopard and Windows separately and therefore when one is running the other is not active. The only thing that controls how much RAM Windows sees/uses is determined by the type of Windows you have installed (32BIT or 64BIT). Please do not confuse that with Gigabytes of RAM or disk space.
32BIT Windows has a maximum limit of 3GB of RAM (it often uses only around 2GB of RAM when it is sharing the system RAM with your video card. I believe this is the case with you.
64BIT Windows will be able to sees/use all of your 4GB of RAM.
Leopard sees/uses all of your 4GB of RAM.
If you have installed Windows XPSP2 and it is working properly on your boot camp partition then I can assure you that it is the 32BIT version.
FYI - The only time that one can select/decide how much RAM Leopard uses and how much RAM Windows uses is when one is running Windows as a Virtual Machine under software such as Fusion or Parallels. I have assumed that you are running windows on a boot camp partition (from your posts) and therefore this does not apply to you.
Axel F.

Need help with speed dial on Continuum

Similar Messages

Maybe you are looking for