Need help with this problem.
I have just updated my ipod and it is saying i need to connect it to my Apple iPod Power Adapter, the problem is that i do not have one.
Is there anyway to reset the update process untill i get a adapter.
I have tried resetting it with the instructions given on this site, but it is just showing a picture of the Apple iPod Power Adapter plug.
When updating or restoring some iPods via a usb connection, it needs to be plugged into power via the charger to complete the process, and this is why you see that icon displayed. It's also why older iPods that required this step were supplied with a power adaptor as standard.
You may be able to complete the process via a car charger, or via a powered firewire port on the computer (with the required 6 pin cable of course) if you have access to either of those. Or maybe visit an Apple store if one is nearby.
Or you can try this.
http://www.bearsdriving.com/blog/archives/2005/10/youripod_tipo.html
Other than that, your iPod cannot be used until you complete this process.
Similar Messages
-
Hey guys i really need help with this problem...
Hey guys how is everyone? I have a Soundblaster X-Fi XtremeMusic. and i am having a real annoying problem, here is how it all started. I took the time and dusted out my computer by using a can of air duster, and i think a little got on there and it turned into frost. Weird thing is it happened before and i never had this problem. I turn my computer on and crank the volume up i receive no sound what so ever. I know it has to work because i have a pair of DJ headset hooked into the jack, and i heard a little pop sound. And no audio, every last port on the card i cannot get no sound out of it except one of them, it's really annoying i hate this doing this and i have to hook my 5.1 using one jack just to get sound. And it doesnt sound good i have some really powerful 1,000 watt speakers with 2 amps. I know this is yet due to the fact i only have the lime jack in This is the only way it'll work. And i have a THX cable and it works sometime. I hope my soundcard isnt messed up. I really hope you guys can help me with this issue. I cannot contact creative cust service via email because i dont have my box no more, and my serial number is faded on the card (i think that was the serial)
I try to explain the best way i can describe it. Below is my System Specs.
<pre>Processor: AMD Athlon X3 425 @ 2.7GHz
Video Card: ATI HD 5770 1GB
Hard Drive:1TB Western Digital, 500GB Western Digital, 300GB Seagate (all SATA connections)
Heatsink: Zalman CNPS7000C-Cu
Power Supply: Antec 550 Watts True Power II
Sound Card: Creative Soundblaster XI-FI Xtreme Music
Motherboard: ASUS M4A79XTD EVO
DVD Drives x2. Plextor DVD-RW/DL/ Sony DVD-ROM Drive via PATA connections</pre> Thanks in advance hope you all have a splended weekend.Hello
Thank you for your help but unfortunately still have troubles with the soundcard.
I upgraded my system to
RAM: Corsair Vengeance LP 16GB DDR3
Processor: AMD Phenom II X6 1090T Processor, Black Edition 3.3GHz
Video Card: Sapphire 100314-3L Radeon HD 6870 1GB
Hard Drive: 1TB Western Digital, 500GB Western Digital, 300GB Seagate (all SATA connections)
Heatsink: Zalman CNPS7000C-Cu
Power Supply: Corsair TX850W 850 Watt SLI/Crossfire Certified
Sound Card: Creative Labs Soundblaster X-FI Titanium Fatal1ty Professional (getting this soon)
Motherboard: ASUS M4A79XTD EVO (BIOS: 2102)
DVD Drive(s): Plextor DVD-RW/DL/ Sony DVD-ROM Drive via PATA connections
And i still run into problems i think its a matter of a hardware issue. The plugs dont really work
only one does (where lime goes in) And the bass has toned down as well... Isn't as powerful
as it used to be, so my best be is to upgrade to Creative Labs Soundblaster X-FI Titanium Fatal1ty Professional
Thats my only hope...
But again thank you for your help -
I made my administrator account a parental control account, at the time of creating it, the system asked for my administrator password, to restart the computer, and the new account was created. When I accessed that account at the parental control menu I could see my main account on the list and i deleted the account from that list, and now i'm trying to get back to it but I'm not able to because every time i restart the computer brings me back to the account I created. I searched for help on the web and it says to go to users and select the account I want to restore but I can't do it. Please help.
User account – restore missing admin
-
I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respondGenieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller! -
Please I really need help with this video problem.
Hi!
Please I need help with this app I am trying to make for an Android cellphone and I've been struggling with this for a couple of months.
I have a main flash file (video player.fla) that will load external swf files. This is the main screen.When I click the Sets Anteriores button I want to open another swf file called sets.swf.The app is freezing when I click Sets Anteriores button
Here is the code for this fla file.
import flash.events.MouseEvent;
preloaderBar.visible = false;
var loader:Loader = new Loader();
btHome.enabled = false;
var filme : String = "";
carregaFilme("home.swf");
function carregaFilme(filme : String ) :void
var reqMovie:URLRequest = new URLRequest(filme);
loader.load(reqMovie);
loader.contentLoaderInfo.addEventListener(Event.OPEN,comeco);
loader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,progresso);
loader.contentLoaderInfo.addEventListener(Event.COMPLETE,completo);
palco.addChild(loader);
function comeco(event:Event):void
preloaderBar.visible = true;
preloaderBar.barra.scaleX = 0;
function progresso(e:ProgressEvent):void
var perc:Number = e.bytesLoaded / e.bytesTotal;
preloaderBar.percent.text = Math.ceil(perc*100).toString();
preloaderBar.barra.scaleX = perc;
function completo(e:Event):void
preloaderBar.percent.text = '';
preloaderBar.visible = false;
btHome.addEventListener(MouseEvent.MOUSE_DOWN,onHomeDown);
btHome.addEventListener(MouseEvent.MOUSE_UP,onHomeUp);
btSets.addEventListener(MouseEvent.MOUSE_DOWN,onSetsDown);
btSets.addEventListener(MouseEvent.MOUSE_UP,onSetsUp);
btVivo.addEventListener(MouseEvent.MOUSE_DOWN,onVivoDown);
btVivo.addEventListener(MouseEvent.MOUSE_UP,onVivoUp);
btHome.addEventListener(MouseEvent.CLICK,onHomeClick);
btSets.addEventListener(MouseEvent.CLICK,onSetsClick);
function onSetsClick(Event : MouseEvent) : void
if (filme != "sets.swf")
filme = "sets.swf";
carregaFilme("sets.swf");
function onHomeClick(Event : MouseEvent) : void
if (filme != "home.swf")
filme = "home.swf";
carregaFilme("home.swf");
function onHomeDown(Event : MouseEvent) : void
btHome.y += 1;
function onHomeUp(Event : MouseEvent) : void
btHome.y -= 1;
function onSetsDown(Event : MouseEvent) : void
btSets.y += 1;
function onSetsUp(Event : MouseEvent) : void
btSets.y -= 1;
function onVivoDown(Event : MouseEvent) : void
btVivo.y += 1;
function onVivoUp(Event : MouseEvent) : void
btVivo.y -= 1;
Now this is the sets.fla file:
Here is the code for sets.fla
import flash.utils.Timer;
import flash.events.TimerEvent;
var video:Video;
var nc:NetConnection;
var ns:NetStream;
var t : Timer = new Timer(1000,0);
var meta:Object = new Object();
this.addEventListener(Event.ADDED_TO_STAGE,init);
function init(e:Event):void{
video= new Video(320, 240);
addChild(video);
video.x = 80;
video.y = 100;
nc= new NetConnection();
nc.connect(null);
ns = new NetStream(nc);
ns.addEventListener(NetStatusEvent.NET_STATUS, onStatusEvent);
ns.bufferTime = 1;
ns.client = meta;
video.attachNetStream(ns);
ns.play("http://www.djchambinho.com/videos/segundaquinta.flv");
ns.pause();
t.addEventListener(TimerEvent.TIMER,timeHandler);
t.start();
function onStatusEvent(stat:Object):void
trace(stat.info.code);
meta.onMetaData = function(meta:Object)
trace(meta.duration);
function timeHandler(event : TimerEvent) : void
if (ns.bytesLoaded>0&&ns.bytesLoaded == ns.bytesTotal )
ns.resume();
t.removeEventListener(TimerEvent.TIMER,timeHandler);
t.stop();
The problem is when I test it on my computer it works but when I upload it to my phone it freezes when I click Sets Anteriores button.
Please help me with this problem I dont know what else to do.
thank youMy first guess is you're simply generating an error. You'll always want to load this on your device in quick debugging over USB so you can see any errors you're generating.
Outside that, if you plan on accessing anything inside the SWF you should be loading the SWF into the correct context. Relevant sample code:
var context:LoaderContext = new LoaderContext();
context.securityDomain = SecurityDomain.currentDomain;
context.applicationDomain = ApplicationDomain.currentDomain;
var urlReq:URLRequest = new URLRequest("http://www.[your_domain_here].com/library.swf");
var ldr:Loader = new Loader();
ldr.load(urlReq, context);
More information:
http://help.adobe.com/en_US/ActionScript/3.0_ProgrammingAS3/WS5b3ccc516d4fbf351e63e3d118a9 b90204-7de0.html
If you're doing this on iOS you'll need to stripped SWFs if you plan on using any coding (ABC) inside the files. You mentioned iOS so I won't get into that here, but just incase, here's info on stripping external SWFs:
http://blogs.adobe.com/airodynamics/2013/03/08/external-hosting-of-secondary-swfs-for-air- apps-on-ios/ -
I need help with this code error "unreachable statement"
the error_
F:\Java\Projects\Tools.java:51: unreachable statement <-----------------------------------------------------------------------------------------------------------------THIS
int index;
^
F:\Java\Projects\Tools.java:71: missing return statement
}//end delete method
^
F:\Java\Projects\Tools.java:86: missing return statement
}//end getrecod
^
3 errors
import java.util.*;
import javax.swing.*;
import java.awt.*;
public class Tools//tool class
private int numberOfToolItems;
private ToolItems[] toolArray = new ToolItems[10];
public Tools()//array of tool
numberOfToolItems = 0;
for(int i = 0; i < toolArray.length; i++)//for loop to create the array tools
toolArray[i] = new ToolItems();
}//end for loop
}//end of array of tools
public int search(int id)//search mehtod
int index = 0;
while (index < numberOfToolItems)//while and if loop search
if(toolArray[index].getID() == id)
return index;
else
index ++;
}//en while and if loop
return -1;
}//end search method
public int insert(int id, int numberInStock, int quality, double basePrice, String nm)//insert method
if(numberOfToolItems >= toolArray.length)
return 0;
int index;
index = search(id); <-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------HERE
if (index == -1)
toolArray[index].assign(id,numberInStock, quality, basePrice,nm);
numberInStock ++;
return 1;
}//end if index
}//end if toolitem array
return -1;
}//end insert method
public int delete(/*int id*/)//delete method
}//end delete method
public void display()//display method
for(int i = 0; i < numberOfToolItems; i++)
//toolArray.display(g,y,x);
}//end display method
public String getRecord(int i)//get record method
// return toolArray[i].getName()+ "ID: "+toolArray[i].getID()
}//end getrecod
}//end class
Edited by: ladsoftware on Oct 9, 2009 6:08 AM
Edited by: ladsoftware on Oct 9, 2009 6:09 AM
Edited by: ladsoftware on Oct 9, 2009 6:10 AM
Edited by: ladsoftware on Oct 9, 2009 6:11 AMladsoftware wrote:
Subject: Re: I need help with this code error "unreachable statement"
F:\Java\Projects\Tools.java:51: unreachable statement <-----------------------------------------------------------------------------------------------------------------THIS
int index;
^
F:\Java\Projects\Tools.java:71: missing return statement
}//end delete method
^
F:\Java\Projects\Tools.java:86: missing return statement
}//end getrecod
^
3 errorsThe compiler is telling you exactly what the problems are:
public int insert(int id, int numberInStock, int quality, double basePrice, String nm)//insert method
if(numberOfToolItems >= toolArray.length)
return 0; // <<== HERE you return, so everyting in the if block after this is unreachable
int index;
index = search(id); //< -----------------------------------------------------------------------------------------------------------------HERE
if (index == -1)
toolArray[index].assign(id,numberInStock, quality, basePrice,nm);
numberInStock ++;
return 1;
}//end if index
}//end if toolitem array
return -1;
}//end insert method
public int delete(/*int id*/)//delete method
// <<== HERE where is the return statement?
}//end delete method
public String getRecord(int i)//get record method
// return toolArray.getName()+ "ID: "+toolArray[i].getID() <<== HERE you commented out the return statement
}//end getrecod
}//end class -
Need Help with Scrolling Problem
I have a JTree displayed in scrollpane. Based on search criterial I select the nodes where the search criteria is found. If the match is located off the screen further down into the tree, the node is highlighted but the scrollpane doesn't automatically scroll down to show it. Any help with this problem is appreciated.
Wow.. Thanks. I thought I would need some fancy code to handle this problem. scrollPathToVisible did it for me. Thanks.
-
I just downloaded an album from itunes and 2 of the tracks will not play at all, they cut off. I need help with this??
Does the track play correctly in Quicktime Player? If it does then it is an iTunes issue. If it doesn't then it is possible the file was not completely downloaded, or is corrupt.
Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list (e.g., ringtones), or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid.
If it can be downloaded again, delete the track from iTunes.
Select the store on the left side of iTunes.
Click on Purchased on the right side under Quick Links.
You can re-download your available previous purchases.
If it is corrupt and you cannot download it a second time, contact Apple. Contact iTunes Store support staff through the report a problem links in your account history or,
iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html > Get iTunes support via Express Lane > iTunes > iTunes Store -
Need help with getResource() problem under weblogic 6.1
Hey all,
I've got a serious problem that I can't figure out. This should be really
simple - but it's alluding me. I have an ear file with a number of servlets
inside it. This ear file also contains a resource that my servlets want to
read from. This resource is located (within the ear file) at:
"/content/structure/a.txt". The file contains raw ascii.
To have my serlvet read from this file, I thought it would be as simple as:
URL content =
servlet.getServletContext().getResource("/content/structure/a.txt");
// pw is an instance of PrintWriter
pw.print(content.getContent());
However, when I execute the above I get the following exception:
java.lang.NullPointerException
at
java.net.URLConnection.stripOffParameters(URLConnection.java:1011)
at java.net.URLConnection.getContentHandler(URLConnection.java:979)
at java.net.URLConnection.getContent(URLConnection.java:581)
OK, so fine - I figure that I'm new to this. The documentation for the URL
class tells me there is another way around this. It says that rather then
calling getContent() directly, I can open a stream on the URL and read from
that, like so:
URL content =
servlet.getServletContext().getResource("/content/structure/scenario2resourc
es.txt");
FileInputStream fis = content.openStream();
but when I do this I get the following different exception:
java.lang.ClassCastException: weblogic.utils.zip.SafeZipFileInputStream^M
at Utility.writeFileToOutput(Utility.java:134)^M
Apparently this thing is trying to return a web-logic-specific stream (which
is incompatible with an FileInputStream) - which I don't want to use or
learn about since I want my stuff to work under other webservers.
Can anyone tell me what I'm doing wrong? This should be simple.
-john
John Hilgedick
WisdomTools, Inc.
[email protected]
Wenjin,
I appreciate your response. I tried treating it as a normal InputStream -
but it didn't make any difference. Here's what I did:
URL content =
servlet.getServletContext().getResource("/content/structure/scenario2resourc
es.txt");
InputStream is = (InputStream)content.getContent();
And here's the exception:
java.lang.NullPointerException^M
at
java.net.URLConnection.stripOffParameters(URLConnection.java:1011)^M
at
java.net.URLConnection.getContentHandler(URLConnection.java:979)^M
at java.net.URLConnection.getContent(URLConnection.java:554)^M
at java.net.URL.getContent(URL.java:807)^M
at Utility.writeFileToOutput(Utility.java:134)^M
You can see that it is definitely breaking somewhere in getContent().
If you have any other ideas, I'd appreciate hearing about them.
-john
----- Original Message -----
From: "Wenjin Zhang" <[email protected]>
Newsgroups: weblogic.developer.interest.servlet
Sent: Wednesday, November 20, 2002 5:03 PM
Subject: Re: Need help with getResource() problem under weblogic 6.1
>
> The "/" in getServletContext().getResource("/content/structure/a.txt")
means the
> web (WAR) application root, not your EAR root.
>
> The ClassCastException is because that content.openStream() is not
FileInputStream
> and has nothing to do with Weblogic. You should treat it as normal
InputStream.
>
>
> "John Hilgedick" <[email protected]> wrote:
> >Hey all,
> >
> >I've got a serious problem that I can't figure out. This should be
really
> >simple - but it's alluding me. I have an ear file with a number of
servlets
> >inside it. This ear file also contains a resource that my servlets want
> >to
> >read from. This resource is located (within the ear file) at:
> >"/content/structure/a.txt". The file contains raw ascii.
> >
> >To have my serlvet read from this file, I thought it would be as simple
> >as:
> >
> >URL content =
> >servlet.getServletContext().getResource("/content/structure/a.txt");
> >// pw is an instance of PrintWriter
> >pw.print(content.getContent());
> >
> >However, when I execute the above I get the following exception:
> >
> >java.lang.NullPointerException
> > at
> >java.net.URLConnection.stripOffParameters(URLConnection.java:1011)
> > at
java.net.URLConnection.getContentHandler(URLConnection.java:979)
> > at java.net.URLConnection.getContent(URLConnection.java:581)
> >
> >OK, so fine - I figure that I'm new to this. The documentation for the
> >URL
> >class tells me there is another way around this. It says that rather
> >then
> >calling getContent() directly, I can open a stream on the URL and read
> >from
> >that, like so:
> >
> >URL content =
>
>servlet.getServletContext().getResource("/content/structure/scenario2resour
c
> >es.txt");
> >FileInputStream fis = content.openStream();
> >
> >but when I do this I get the following different exception:
> >
> >java.lang.ClassCastException: weblogic.utils.zip.SafeZipFileInputStream^M
> > at Utility.writeFileToOutput(Utility.java:134)^M
> >
> >Apparently this thing is trying to return a web-logic-specific stream
> >(which
> >is incompatible with an FileInputStream) - which I don't want to use
> >or
> >learn about since I want my stuff to work under other webservers.
> >
> >Can anyone tell me what I'm doing wrong? This should be simple.
> >
> >-john
> >
> >
> >--
> >John Hilgedick
> >WisdomTools, Inc.
> >[email protected]
> >
> >
>
-
I need help with this script please ASAP
So I need this to work properly, but when ran and the correct answer is chosen the app quits but when the wrong answer is chosen the app goes on to the next question. I need help with this ASAP, it is due tommorow. Thank you so much for the help if you can.
The script (Sorry if it's a bit long):
#------------Startup-------------
display dialog "Social Studies Exchange Trviva Game by Justin Parzik" buttons {"Take the Quiz", "Cyaaaa"} default button 1
set Lolz to (button returned of the result)
if Lolz is "Cyaaaa" then
killapp()
else if Lolz is "Take the Quiz" then
do shell script "say -v samantha Ok starting in 3…2…1…GO!"
#------------Question 1-----------
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 2--------
display dialog "Most children were taught
to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------------Question 3---------
display dialog "In the 1730s and 1740s, a religious movement called the_______swept through the colonies." buttons {"Glorius Revolution", "Great Awakening", "The Enlightenment"}
set A3 to (button returned of the result)
if A3 is "Great Awakening" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-----------Question 4--------
display dialog "_______ was
a famous American Enlightenment figure." buttons {"Ben Franklin", "George Washington", "Jesus"}
set A4 to (button returned of the result)
if A4 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 5-------
display dialog "______ ownership gave colonists political rights as well as prosperity." buttons {"Land", "Dog", "Slave"}
set A5 to (button returned of the result)
if A5 is "Land" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 6--------
display dialog "The first step toward guaranteeing these rights came in 1215. That
year, a group of English noblemen forced King John to accept the…" buttons {"Declaration of Independence", "Magna Carta", "Constitution"}
set A6 to (button returned of the result)
if A6 is "Magna Carta" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 7--------
display dialog "England's cheif lawmaking body was" buttons {"the Senate", "Parliament", "King George"}
set A7 to (button returned of the result)
if A7 is "Parliament" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 8-----
display dialog "Pariliament decided to overthrow _______ for not respecting their rights" buttons {"King James II", "King George", "King Elizabeth"}
set A8 to (button returned of the result)
if A8 is "King James II" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 9------
display dialog "Parliament named ___ and ___ as England's new monarchs in something called ____." buttons {"William/Mary/Glorius Revolution", "Adam/Eve/Great Awakening", "Johhny/Mr.Laphalm/Burning of the hand ceremony"}
set A9 to (button returned of the result)
if A9 is "William/Mary/Glorius Revolution" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 10-----
display dialog "After accepting the throne William and Mary agreed in 1689 to uphold the English Bill of _____." buttons {"Money", "Colonies", "Rights"}
set A10 to (button returned of the result)
if A10 is "Rights" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 11------
display dialog "By the late 1600s French explorers had claimed the ___ River Valey" buttons {"Mississippi", "Ohio", "Hudson"}
set A11 to (button returned of the result)
if A11 is "Ohio" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------Question 12---------
display dialog "______ was sent to ask the French to leave 'English Land'." buttons {"Johhny Tremain", "George Washington", "Paul Revere"}
set A12 to (button returned of the result)
if A12 is "George Washington" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 13-------
display dialog "_____ proposed the Albany Plan of Union" buttons {"George Washingon", "Ben Franklin", "John Hancock"}
set A13 to (button returned of the result)
if A13 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 14------
display dialog "The __________ declared that England owned all of North America east of the Mississippi" buttons {"Proclomation of England", "Treaty of Paris", "Pontiac Treaty"}
set A14 to (button returned of the result)
if A14 is "" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-------Question 15-------
display dialog "Braddock was sent to New England so he could ______" buttons {"Command an attack against French", "Scalp the French", "Kill the colonists"}
set A15 to (button returned of the result)
if A15 is "Command an attack against French" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------TheLolQuestion-----
display dialog "____ is the name of the teacher who runs this class." buttons {"Mr.White", "Mr.John", "Paul Revere"} default button 1
set LOOL to (button returned of the result)
if LOOL is "Mr.White" then
do shell script "say -v samantha Congratulations…you…have…common…sense"
else
do shell script "say -v alex Do…you…have…eyes?"
#------END------
display dialog "I hope you enjoyed the quiz!" buttons {"I did!", "It was horrible"}
set endmenu to (button returned of the result)
if endmenu is "I did!" then
do shell script "say -v samantha Your awesome"
else
do shell script "say -v alex Go outside and run a lap"
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end ifUse code such as:
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
#----------Question 2--------
display dialog "Most children were taught to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
(90444) -
I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?
For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well... -
I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?
For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well... -
Hi!!
I urgently need help with this:
When I compile this in Flex Builder 3 it says: The element type 'mx:Application' must be terminated by the matching end-tag '</mx:Application>'.
but I have this end tag in my file, but when I try to switch from source view to desgin view it says, that: >/mx:Script> expected to terminate element at line 71, this is right at the end of the .mxml file. I have actionscript(.as) file for scripting data.
This is the mxml code to terminate apllication tag which I did as you can see:
MXML code:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" backgroundGradientAlphas="[1.0, 1.0]" backgroundGradientColors="[#007200, #000200]" width="1024" height="768" applicationComplete="popolni_vse()">
<mx:HTTPService id="bazaMME" url="lokalnabaza/baza_MME_svn.xml" showBusyCursor="true" resultFormat="e4x"/>
<mx:Script source="dajzaj.as"/>
<mx:states>
<mx:State name="Galerije">
<mx:SetProperty target="{panel1}" name="title" value="Galerije MME"/>
<mx:SetProperty target="{panel2}" name="title" value="opis slik"/>
<mx:SetProperty target="{panel3}" name="title" value="Opis Galerije"/>
<mx:AddChild relativeTo="{panel1}" position="lastChild">
<mx:HorizontalList x="0" y="22" width="713.09863" height="157.39436" id="ListaslikGalerije"></mx:HorizontalList>
</mx:AddChild>
<mx:SetProperty target="{text1}" name="text" value="MME opisi galerij "/>
<mx:AddChild relativeTo="{panel1}" position="lastChild">
<mx:Label x="217" y="346" text="labela za test" id="izbr"/>
</mx:AddChild>
<mx:SetProperty target="{label1}" name="text" value="26. November 2009@08:06"/>
<mx:SetProperty target="{label1}" name="x" value="845"/>
<mx:SetProperty target="{label1}" name="width" value="169"/>
<mx:SetProperty target="{Gale}" name="text" value="plac za Galerije"/>
</mx:State>
<mx:State name="Projekti"/>
</mx:states>
<mx:MenuBar id="MMEMenu" labelField="@label" showRoot="true" fillAlphas="[1.0, 1.0]" fillColors="[#043D01, #000000]" color="#9EE499" x="8" y="24"
itemClick="dajVsebino(event)" width="1006.1268" height="21.90141">
<mx:XMLList id="MMEmenuModel">
<menuitem label="O nas">
<menuitem label="reference podjetja" name="refMME" type="check" groupName="one"/>
<menuitem label="reference direktor" name="refdir" type="check" groupName="one"/>
<menuitem label="Kontakt" name="podatMME" groupName="one" />
<menuitem label="Kje smo" name="lokaMME" type="check" groupName="one" />
</menuitem>
<menuitem type="separator"/>
<menuitem label="Galerija">
<menuitem label="Slovenija" name="galSvn" type="check" groupName="one"/>
<menuitem label="Nemčija" name="galDeu" type="check" groupName="one" />
</menuitem>
<menuitem type="separator"/>
<menuitem label="projekti">
<menuitem label="Slovenija" name="projSvn" type="check" groupName="one"/>
<menuitem label="Nemčija" name="projDeu" type="check" groupName="one" />
<menuitem label="Madžarska" name="projHun" type="check" groupName="one"/>
</menuitem>
</mx:XMLList>
</mx:MenuBar>
<mx:Label x="845" y="10" text="25. November 2009@08:21" color="#FFFFFF" width="169" height="18.02817" id="label1"/>
<mx:Label x="746" y="10" text="zadnja posodobitev:" color="#FFFFFF"/>
<mx:Panel x="9" y="57" width="743.02814" height="688.4507" layout="absolute" title="Plac za Vsebino" id="panel1">
<mx:Text x="0" y="-0.1" text="MME vsebina" width="722.95776" height="648.4507" id="Gale"/>
</mx:Panel>
<mx:Label x="197.25" y="748.45" color="#FFFFFF" text="Copyright © 2009 MME d.o.o." fontSize="12" width="228.73239" height="20"/>
<mx:Label x="463.35" y="748.45" text="izdelava spletnih strani: FACTUM d.o.o." color="#FBFDFD" fontSize="12" width="287.60565" height="20"/>
<mx:Panel x="759" y="53" width="250" height="705.07043" layout="absolute" title="Plac za hitre novice" id="panel3">
<mx:Text x="0" y="0" text="MME novice" width="230" height="665.07043" id="text1"/>
<mx:Panel x="-10" y="325.35" width="250" height="336.61972" layout="absolute" title="začasna panela" color="#000203" themeColor="#4BA247" cornerRadius="10" backgroundColor="#4B9539" id="panel2">
<mx:Label x="145" y="53" text="vrednost" id="spremmen"/>
<mx:Label x="125" y="78" text="Label"/>
<mx:Label x="125" y="103" text="Label"/>
<mx:Label x="0" y="53" text="spremenljivka iz Menuja:"/>
<mx:Label x="45" y="78" text="Label"/>
<mx:Label x="45" y="103" text="Label"/>
</mx:Panel>
</mx:Panel>
<mx:Label x="9.9" y="10" text="plac za naslov MME vsebine" id="MMEnaslov" color="#040000"/>
</mx:states></mx:Application>I know it's been a while but… did you fix this?
It looks to me like you are terminating the <mx:Application> tag at the top. The opening tag should end like this: resultFormat="e4x">, not resultFormat="e4x"/> (Remove the /).
Carlos -
powerpoint presentation I have stored in icloud until recently were syncing to Keynote on my iPad with no problem. Now when I open Keynote on my iPad there is nothing. I could use some help with this problem.
Morning AndreD86,
Thanks for using Apple Support Communities.
These articles explain exactly what is backed up by using their method.
iTunes: About iOS backups
http://support.apple.com/kb/ht4946
and
iCloud: Backup and restore overview
http://support.apple.com/kb/ht4859
Also we want to double-click the Home button and swipe the Task Bar to the right.
Then make sure the button on the far left of Task Bar is not muted.
Best of luck,
Mario -
Please help! I am trying to change my Apple Id that used to be my mother to Mine- Every time i have it changed and i go and try and do an update it continues to ask for her old password. I really need help with this!
Phil0124 wrote:
Apps downloaded with an Apple ID are forever tied to that Apple ID and will always require it to update.
The only way around this is to delete the apps that require the other Apple ID and download them again with yours.
Or simply log out of iTunes & App stores then log in with updated AppleID.
Maybe you are looking for
-
How to make use of SSO login credentials of oracle in Authentication shema using APEX
Hi I am using SSO login for Authorizations. Would like make use of SSO for creating authentication schema. I would appreciate if someone can help me on this. My main requirement is to assign privilege based on users using SSO loging.
-
I was looking at the clipboard kit yesterday and was really amazed how well it was done. Thanks. Initially we were thinking to use slide for our WebDAV application and now it seems that the oracle Clipboard (mod_oradav) would really deliver what we w
-
Hello, i've a problem. This weeks i found some problems DBCHECK (db13) in DVP and PRD system On PRD: SAPDBA log from 0607110600.chk Return code: 0001 Success with warnings Database host: s
-
Scanner M 1005 output format as PDF
I want to understand how to scan documents on the HP M 1005 scanner. printer and photocopier, and save the output as PDF document.
-
Transparent Animation to export to Premiere Pro CC
I have a frame by frame walkcycle and would like to have it above a video, but if I export a transparent gif,Premiere either can't read the file,or it's just the first frame with no animation at all... But if I render it as an video it isn't transpar