Need help with two-factor auth for windows logon using CSS

Hi all,
I have been trying for a couple of days now to get two-factor auth for windows logon working on my X1C Type 3443.
I am running Windows 7 (64-bit) with Lenovo System Update 5.06.0007, Lenovo Solution Center 2.6.001.00, ThinkVantage Fingerprint Software 5.9.9.7282, ThinkVantage Client Security Solution 8.30.0031.00. If it's of any importance, my X1C was originally shipped with Windows 8, but I couldn't stand it and reinstalled Windows 7 instead.
I have uninstalled and reinstalled the above programs in the following order:
1) Install System Update and reboot
2) Install Solution Center and reboot
3) Install CSS and reboot
4) Install Fingerprint Software and reboot
Everything seems to be working fine by itself, except that when I try to configure two-factor auth in CSS, the Fingerprint tab (on the left of the GUI) is greyed out and CSS tells me that I have no fingerprints enrolled. The Fingerprint Software, however, is working just fine and shows me as having a fingerprint enrolled there.
I have spent all morning searching for a solution, but everything I find dates back to 2011, when ThinkPads still came with ThinkVantage Toolbox. I obviously can't download that anymore, so I'm at a loss. Can someone please help? Thanks!
Candace

Similar Messages

I think I need help with driver (software) settings for D110a

I think I need help with driver (software) settings for D110a all-in-one
Product: D110a all-in-one
OS: Windows XP Professional
Error messages: None
Changes before problem appeared: None--new installation
The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
least acceptable, Some would probably say good or very good.
It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
trunk is a round, solid object.
I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
e-mail me at [email protected]

brazzmonkey wrote:
Hi everyone,
I noticed the following message when network starts on my gateway
Warning: This functionality is deprecated.
Please refer to /etc/rc.conf on how to define a single wired
connection, or use a utility such as netcfg.
Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
Currently, my set up is the following (old way):
INTERFACES=(eth0 eth1)
eth0="dhcp"
eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
ROUTES=(!gateway)
eth0 is on DHCP because the IP is dynamically assigned my ISP.
eth1 has a fix IP because it's on the LAN side.
No problem to use DHCP on eth0 with the new settings.
But for eth1, I don't know what I am supposed to write for gateway.
Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
Any guidance appreciated, thanks.
brazzmonkey,
you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
Use, f.e., netcfg:
Comment your old lines.
In /etc/rc.conf insert:
NETWORKS=(Eth0-dhcp Eth1-static)
DAEMONS=(..... !network @net-profiles ....)
In /etc/network.d create 2 files:
First one is named Eth0-dhcp.
Contents:
CONNECTION="ethernet"
DESCRIPTION="Whatever text"
INTERFACE=eth0
HOSTNAME="your hostname"
IP="dhcp"
DHCP_TIMEOUT=15
Second one is named Eth1-static.
Contents:
CONNECTION='ethernet'
DESCRIPTION='whatver'
INTERFACE='eth1'
HOSTNAME='hname'
IP='static'
ADDR='192.168.0.10'
GATEWAY='192.168.0.1' # your gateway IP
DNS=('192.168.0.1') # your DNS server
The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
Hope it helps.
mektub
PS: netcfg must be installed.
Last edited by Mektub (2011-07-20 14:07:05)

Need help with a activation code for Adobe Acrobat X Standard for my PC,, Don't have older version serial numbers, threw programs away, only have Adobe Acrobat X Standard, need a code to unlock program?

Need help with a activation code for Adobe Acrobat X Standard for my PC, Don't have older Version of Adobe Acrobat 9, 8 or 7.

You don't need to install the older version, you only need the serial number from your original purchase. If you don't have them to hand, did you register? If so, they should be in your Adobe account. If not you really need to contact Adobe, though it isn't clear they will be able to do anything without some proof of purchase etc.

I need help with downgradeing my ios for my ipod touch 4th gen

i need help with downgradeing my ios for my ipod touch 4th gen

As has alwys been the case, you cannot go back.
Sorry

[solved]Need help with a bash script for MOC conky artwork.

I need some help with a bash script for displaying artwork from MOC.
Music folders have a file called 'front.jpg' in them, so I need to pull the current directory from MOCP and then display the 'front.jpg' file in conky.
mocp -Q %file
gives me the current file playing, but I need the directory (perhaps some way to use only everything after the last '/'?)
A point in the right direction would be appreciated.
thanks, d
Last edited by dgz (2013-08-29 21:24:28)

Xyne wrote:
You should also quote the variables and output in double quotes to make the code robust, e.g.
filename="$(mocp -Q %file)"
dirname="${filename%/*}"
cp "$dirname"/front.jpg ~/backup/art.jpg
Without the quotes, whitespace will break the code. Even if you don't expect whitespace in any of the paths, it's still good coding practice to include the quotes imo.
thanks for the tip.
here it is, anyhow:
#!/bin/bash
filename=$(mocp -Q %file)
dirname=${filename%/*}
cp ${dirname}/front.jpg ~/backup/art.jpg
then in conky:
$alignr${execi 30 ~/bin/artc}${image ~/backup/art.jpg -s 100x100 -p -3,60}
thanks for the help.
Last edited by dgz (2013-08-29 21:26:32)

Two factor auth for CRES portal

This is a wishlist of mine which I hope would get into the plans for future enhancements to CRES service. Some form(s) of two factor authentication for access to CRES service would be very useful. I'm thinking of a low overhead approach for both internal (within the org) and external users such as out-of-band SMS OTP or a software token app on the device generating OTP (as opposed to hardware based form factors).
Thanks,
John
Sent from Cisco Technical Support iPad App

This, and improving the registration experience for mobile users, are both on the CRES roadmap. For two-factor auth, although I can't commit to anything, I'd agree that some sort of out-of-band communication of a one time password, by SMS or an alternate email address for example, would be the preferred approach.

I need help with my new ipod on windows me

I bought myself an ipod in the states (usa) i was told it was universal & can be used in the uk! i have windows ME & was also told this would be compatible with this computer but once i tried to download my software of the cd & put in my details of the ipod it came up with the following error message:ERROR 1904.MODULEC:\PROGRAM FILES\IPOD\IPOD UPDATER 2005-02-07\IPOD UPDATER EXT.Dll FAIIED TO REGISTER .HRESULT-2147220473 CONTACT YOUR SUPPORT PERSONELL.
can any one help????
aslo i was told once downloaded onto my p.c i then cant use my ipod on another p.c this does not make any sense say if you upgrade your p.c does this mean you then cant use your ipod anymore ??? please help me ???

Hello Andrew,
Was the reply I gave you in the other post you made of no help?
I explained that Windows ME is not compatible, but you can get it work with a little messing around, and once again, here's a link on how to do it.
Guide to iPod and Windows ME.
As I said previously though, you won't be able to use iTunes.
See my other answer to you here.
Jeff Bryan, "Need help with my iPod." #4, 06:13am Aug 8, 2005 CDT

Need help with Raw file converter for ps6 on windows xp

I had to re-install my CS6 on my computer and now I can't get any of the raw files open. I'm not on the cloud and am running Windows xp, service pack 3. Can anyone help?

Thanks Richard. I made sure that I was totally up to date via help-updates on all programs (cs6 & bridge) and it still doesn't work. Any other thoughts? I remember vaguely that I had this problem before and had to download a new file. I tried looking on Adobe site and the suggestion is the raw conversion 8.3. Downloaded that (said it was for windows xp, serv. pack 3) and I can see the file but when I click on that it comes up as a .pf file and I"m not sure where to go from here ... or if I have now messed up everything really well.
Yes, XP is on the way out of my life as I need a new computer so this maybe the push that I need. But in the meantime, I really need to process some images.
Any other thoughts?
Noella

Need help with recomendations on licenses for Server 2012 Std R2

I have a client who wants to purchase a server from me. I can buy the parts and assemble the system no problem. But I'm a newbie when it comes to user CALs or device CALs. The company will be having about 50 computers connecting to it. I'm assuming they'll
just be using the standard user/password domain login.
What else would I need to purchase in addition to the OS?
What kind of features does the vanilla server OS give you? Can 50 computers connect to just the OS alone? I've seen places that have a 1 user CAL for $36. Do I need 50 of these? If I don't purchase them right away, could my client still connect their computers
to the server?
mr.t

Hello,
Licensing Windows Server 2012 comes in four different flavours foundation, essentials, standard and datacenter.
Your client is wanting connect 50 users which really does rule out two of those flavours.
Essentials is ruled out because it is an OEM operating system and only supports up to 15 users and has limited functionality
Foundation is rules out because it only supports up to 25 users and has limited functionality
This leaves us with two Windows Server 2012 flavours you can purchase Standard or Datacenter. They both have exactly the same functionality; the difference is the virtualisation
rights. With standard one license covers two physical processors and supports two virtual machines, if you need more virtual machines then you would have to buy another standard license and giving the right to four virtual machines for example. Then
for datacenter license covers two physical processors and covers you for an unlimited amount of virtual operating systems.
To make this hopefully easier:
1 x standard license covers = 2 x physical processors – 2 x virtual operating systems environments
1x datacenter license covers = 2 x physical processors – unlimited virtual operating environments
Both Standard and Datacenter come with Full functionality
Meaning standard licensing is really for no or very limited virtual environments, then if you are looking in to a virtual environment Datacenter is the way to go.
On regards to CALS are required for every user or device accessing the server. They/you will need to decide whether or not you go for Device or user CALs. User CAL
is more expensive but it gives companies a lot more flexible if the users are running more than one device for example if they support a bring your own device strategy. Although there are different types of CALS depending on what the customer will be
looking to use and access.
Also can your user still connect to the server: technically speaking yes, CALS are not like license keys you cannot activate them it is effectively a piece of
paper to say you have purchased X amount CALS and your compliant to allow your users to connect. So you can connect with out purchasing but you will not be compliant from a licensing standpoint.
Hope this helps to some degree!
Cheers,
Harry

Need help with graphics card options for an early 2008 mac pro

Hello,
   I have an early 2008 mac pro with 2 x 3.2 GHz quad core Intel Xeon and 6Gigs of ram, currently running with an Nvidia Geforce 8800 GT with 512mb.
    It is also running 10.7.2.
   I would like to either add a video card on top of the one I am currently running or replace it completely if necessary.
   I do video editing on the Mac, no gaming and only a small amount of photoshop, and as the resolutions get larger I would like to have my machine keep up.
   My questions are,
     1. What cards would you the community suggest?
     2. Can I add a whole other card to my system or do I have to replace the current one?
     3. If I can hold two cards what special accomidations would be needed in regards to final cut performance if any?
    Thank you for any help you would like to give.
Rob

The two main cards for mac pros are the apple versions of the ATI Radeon 5770 and 5870.
The 5770 requires one aux power adaptor and the 5870 requires two. So generally you could only have one 5780 or two 5770's.
Video cards which don't require aux power should be able to coexist with these cards so log as it's all within the power supply maximums of course.

I need help with proper DNS setup for 10.5.8 Server

I'm administering a 10.5.8 server that I sold and setup about a year ago. I'm experiencing issues with getting iCal server to be happy. All of the clients are running 10.5.8, but I'm running 10.6.1. I've heard from others that connecting iCal in 10.6 to a 10.5 iCal Server should be no problem.
I'm beginning to think that I have DNS issues. Probably because I'm not and never have been 100% certain how to set it up completely correctly. I used to be able to get Kerberos tickets, but now I can't. With the new "Ticket Viewer" in 10.6, it asks for two bits of information. First is "Identity" where I'm guessing I should put [email protected] and then password. When I do this I get an alert dialog that says "Kerberos Error -- cannot resolve network address for KDC in realm example.com"
The server is a Mac Pro tower with two Ethernet ports. En2 is connected directly to the Internet and has a static IP with a domain name assigned to it. We'll call it "example.com" for the purposes of the discussion. The En1 is connected to the network switch and has a static LAN IP of 192.168.1.250. All clients inside and outside are able to reach the server via domain name for WWW & AFP, no problem.
nslookup on the static IP address returns "example.com" and nslookup on "example.com" returns the correct static IP address. Open Directory is running and happy including Kerberos. The LDAP search base is "dc=example,dc=com". The LDAP search base is a concept I haven't quite grasped, so I'm just going to assume it's correct.
The domain name is hosted outside by a service provider that forwards all "example.com" requests to the server with the exception of mail.
In DNS, I have three "sections" that look like this:
Name Type Value
1.168.192.in-addr.arpa. Reverse Zone -
192.168.1.250 Reverse Mapping example.com.
000.000.00.in-addr.arpa. Reverse Zone -
000.000.000.000 Reverse Mapping example.com.
com. Primary Zone -
mail.example.com. Alias mail.our-email-isp.com.
example.com. Machine Multiple values
www.example.com. Machine Multiple values
NOTE: the zeros aren't actually zeros, they are the static IP assigned to the server/domain
When I select the top element "1.168.192.in-addr.arpa." down below "Allows zone transfer" is NOT checked. Nameservers shows the zone as "1.168.192.in-addr.arpa." and the Nameserver Hostname as "ns.example.com."
When I select the next line down "192.168.1.250", Resolve 192.168.1.250 to: example.com.
When I select the "000.000.00.in-addr.arpa." element, it has the same settings -- nameservers "000.000.00.in-addr.arpa." and "ns.example.com."
When I select the next line down (our static IP), Resolve 000.000.000.000 to: example.com.
When I select "com." the admin email is populated with a valid email address, Allows zone transfer is NOT checked. In nameservers, Zone is "com." and Nameserver Hostname is "example.com." The mail exchangers are mail2.our-email-isp.com. priority 10 and mail.our-email-isp.com. and priority 20.
When I select the machine "example.com." it shows both the real-world static IP and the 192.168.1.250, same with "www.example.com.".
Am I doing something wrong with this setup? Should "com." be the primary zone or should that be "example.com." ???
I've been thinking about getting rid of the DNS entry for the 192.168.1.250 address altogether, but will the clients in the office suffer performance issues??? I do not think that the client workstations are configured to get DNS from the server anyway. Should the "www.example.com." record be a Machine record or should it be an alias record?
Any help you have to offer is greatly appreciated! Thanks!
In the meantime, I'm going to look around and see if I can understand "Allows zone transfer" and LDAP Search base a bit better.

Okay, I found a lovely article at the following address which I think helps me to clarify what I'm doing wrong. Despite that, I'd still like to have any feedback you have to offer.
http://www.makemacwork.com/configure-internal-dns-1.htm
Also, when editing DNS entries, Server Admin likes to set the nameserver to "ns." -- whatever your domain is. Should I be overriding that and if so, replace it with what?

Hi i need help with getting my homework for school

im in a nine week class that ends tommorw and need help go\etting my program working properly these are the requirements ofr the assignments:
Modify the Inventory Program by adding a button to the GUI that allows the user to move
to the first item, the previous item, the next item, and the last item in the inventory. If the
first item is displayed and the user clicks on the Previous button, the last item should
display. If the last item is displayed and the user clicks on the Next button, the first item
should display.
· Add a company logo to the GUI using Java graphics classes.
Modify the Inventory Program to include an Add button, a Delete button, and a Modifybutton on the GUI. These buttons should allow the user to perform the corresponding actions on the item name, the number of units in stock, and the price of each unit. An item added to the inventory should have an item number one more than the previous last item. Add a Save button to the GUI that saves the inventory to a C:\data\inventory.dat file. Use exception handling to create the directory and file if necessary. Add a search button to the GUI that allows the user to search for an item in the inventory by the product name. If the product is not found, the GUI should display an appropriate message. If the product is found, the GUI should display that products information in the GUI. Post final .class and .java files as an attachment.
this is what i have there are three java files im puttong in here
first is the panel frame
import java.awt.GridLayout;
import java.awt.BorderLayout;
import java.awt.FlowLayout;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JButton;
import javax.swing.JLabel;
import java.awt.GridBagLayout;
import java.awt.GridBagConstraints;
import java.awt.Component;
import javax.swing.SwingConstants;
import javax.swing.Icon;
import javax.swing.JComboBox;
import javax.swing.JTextArea;
import javax.swing.JList;
import java.util.*;
import java.text.NumberFormat;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.net.URL;
import java.io.*;
import java.util.Scanner;
import javax.swing.JOptionPane;
import java.text.NumberFormat;
public class PanelFrame extends JFrame
     private JPanel buttonJPanel; // panel to hold buttons
     private JButton buttons[]; // array of buttons
     private JLabel label1; // JLabel iventory number
     private JLabel label2; // JLabel product name
     private JLabel label3; // JLabel product price
     private JLabel label4; // JLabel product in stock
     private String p_ProductName; // private variable for the employee name.
     private int p_UnitCount; // private variable for the hours worked.
     private double p_UnitPrice; // private variable for the hourly wage.
     private int p_ItemNumber; // private inventory number
     //create inventory object
     Inventory myInventory = new Inventory ();
// no-argument constructor
public PanelFrame()
super( "Panel Demo" );
//Add items to the inventory within the Invntory
          myInventory.addItem(new productinfo(1,"Html a Begginers Guide",14,29.99));
          myInventory.addItem(new productinfo(2,"Html 4 for Dummies",6,29.99));
          myInventory.addItem(new productinfo(3,"Visio Step by Step",7,24.99));
          myInventory.addItem(new productinfo(4,"APA Publication Manual",14,47.99));
          myInventory.addItem(new productinfo(5,"The Gregg Reference Manual",14,37.56));
setLayout( new FlowLayout() ); // set frame layout
// JLabel constructor with a string argument
          label1 = new JLabel( "Inventory Number:%s: %d\n ",p_ItemNumber );
          label1.setToolTipText( "This is Inventory number" );
          add( label1 ); // add label1 to JFrame
          label2 = new JLabel( "\n\nProduct Name: %s: %s\n", p_ProductName);
          label2.setToolTipText( "This is Product Name" );
          add( label2 ); // add label1 to JFrame
          label3 = new JLabel( "\n\nPrice : %s:$%.2f\n",p_UnitPrice );
          label3.setToolTipText( "This is product Price");
          add( label3 ); // add label1 to JFrame
          label4 = new JLabel( "\n\nQuanity %s: %d\n",p_UnitCount);
          label4.setToolTipText( "This is Quanity in stock: " );
          add( label4 ); // add label1 to JFrame
buttons = new JButton[ 4 ]; // create buttons array
buttonJPanel = new JPanel(); // set up panel
buttonJPanel.setLayout( new GridLayout( 1, buttons.length ) );
          String names[] = { "First", "Previous", "Next", "Last" };
          JButton buttons[] = new JButton[ names.length ];
          // create and add buttons
          for ( int count = 0; count < buttons.length; count++ )
          buttons[ count ] = new JButton( names[ count ] );
          buttonJPanel.add( buttons[ count ] ); // add button to panel
          } // end for
// setup the logo for the GUI ...image needs to be in same directory as source code
          URL url = this.getClass().getResource("book103.gif");
          Image img = Toolkit.getDefaultToolkit().getImage(url);
          // scale the image so that it'll fit in the GUI
          Image scaledImage = img.getScaledInstance(100, 100, Image.SCALE_AREA_AVERAGING);
          // create a JLabel with the image as the label's Icon
          Icon logoIcon = new ImageIcon(scaledImage);
          JLabel companyLogoLabel = new JLabel(logoIcon);
          companyLogoLabel.setBorder(BorderFactory.createEmptyBorder(3,3,3,3));
          // add the logo to the GUI
          getContentPane().add(companyLogoLabel, BorderLayout.WEST);
add( buttonJPanel, BorderLayout.SOUTH ); // add panel to JFrame
} // end PanelFrame constructor
} // end class PanelFrame

this is the original part again with the code tag added
import java.awt.GridLayout;
import java.awt.BorderLayout;
import java.awt.FlowLayout;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JButton;
import javax.swing.JLabel;
import java.awt.GridBagLayout;
import java.awt.GridBagConstraints;
import java.awt.Component;
import javax.swing.SwingConstants;
import javax.swing.Icon;
import javax.swing.JComboBox;
import javax.swing.JTextArea;
import javax.swing.JList;
import java.util.;
import java.text.NumberFormat;
import javax.swing.;
import java.awt.;
import java.awt.event.;
import java.net.URL;
import java.io.*;
import java.util.Scanner;
import javax.swing.JOptionPane;
import java.text.NumberFormat;
public class PanelFrame extends JFrame
private JPanel buttonJPanel; // panel to hold buttons
private JButton buttons[]; // array of buttons
private JLabel label1; // JLabel iventory number
private JLabel label2; // JLabel product name
private JLabel label3; // JLabel product price
private JLabel label4; // JLabel product in stock
private String p_ProductName; // private variable for the employee name.
private int p_UnitCount; // private variable for the hours worked.
private double p_UnitPrice; // private variable for the hourly wage.
private int p_ItemNumber; // private inventory number
//create inventory object
Inventory myInventory = new Inventory ();
// no-argument constructor
public PanelFrame()
super( "Panel Demo" );
//Add items to the inventory within the Invntory
myInventory.addItem(new productinfo(1,"Html a Begginers Guide",14,29.99));
myInventory.addItem(new productinfo(2,"Html 4 for Dummies",6,29.99));
myInventory.addItem(new productinfo(3,"Visio Step by Step",7,24.99));
myInventory.addItem(new productinfo(4,"APA Publication Manual",14,47.99));
myInventory.addItem(new productinfo(5,"The Gregg Reference Manual",14,37.56));
setLayout( new FlowLayout() ); // set frame layout
// JLabel constructor with a string argument
label1 = new JLabel( "Inventory Number:%s: %d\n ",p_ItemNumber );
label1.setToolTipText( "This is Inventory number" );
add( label1 ); // add label1 to JFrame
label2 = new JLabel( "\n\nProduct Name: %s: %s\n", p_ProductName);
label2.setToolTipText( "This is Product Name" );
add( label2 ); // add label1 to JFrame
label3 = new JLabel( "\n\nPrice : %s:$%.2f\n",p_UnitPrice );
label3.setToolTipText( "This is product Price");
add( label3 ); // add label1 to JFrame
label4 = new JLabel( "\n\nQuanity %s: %d\n",p_UnitCount);
label4.setToolTipText( "This is Quanity in stock: " );
add( label4 ); // add label1 to JFrame
buttons = new JButton[ 4 ]; // create buttons array
buttonJPanel = new JPanel(); // set up panel
buttonJPanel.setLayout( new GridLayout( 1, buttons.length ) );
String names[] = { "First", "Previous", "Next", "Last" };
JButton buttons[] = new JButton[ names.length ];
// create and add buttons
for ( int count = 0; count < buttons.length; count++ )
buttons[ count ] = new JButton( names[ count ] );
buttonJPanel.add( buttons[ count ] ); // add button to panel
} // end for
// setup the logo for the GUI ...image needs to be in same directory as source code
URL url = this.getClass().getResource("book103.gif");
Image img = Toolkit.getDefaultToolkit().getImage(url);
// scale the image so that it'll fit in the GUI
Image scaledImage = img.getScaledInstance(100, 100, Image.SCALE_AREA_AVERAGING);
// create a JLabel with the image as the label's Icon
Icon logoIcon = new ImageIcon(scaledImage);
JLabel companyLogoLabel = new JLabel(logoIcon);
companyLogoLabel.setBorder(BorderFactory.createEmptyBorder(3,3,3,3));
// add the logo to the GUI
getContentPane().add(companyLogoLabel, BorderLayout.WEST);
add( buttonJPanel, BorderLayout.SOUTH ); // add panel to JFrame
} // end PanelFrame constructor
} // end class PanelFrame

Need help with date range searches for Table Sources in SES

Hi all,
I need help, please. I am trying to satisfy a Level 1 client requirement for the ability to search for records in crawled table sources by a date and/or date range. I have performed the following steps, and did not get accurate results from Advanced searching for date. Please help me understand what I am doing wrong, and/or if there is a way to define a date search attribute without creating a LOV for a date column. (My tables have 500,00 rows.)
I am using SES 10.1.8.3 on Windows 32.
My Oracle 10g Spatial Table is called REPORTS and this table has the following columns:
TRACKNUM Varchar2
TITLE Varchar2
SUMMARY CLOB
SYMBOLCODE Varchar2
Timestamp Date
OBSDATE Date
GEOM SDO_GEOMETRY
I set up the REPORTS table source in SES, using TRACKNUM as the Primary Key (unique and not null), and SUMMARY as the CONTENT Column. In the Table Column Mappings I defined TITLE as String and TITLE.
Under Global Settings > Search Attributes I defined a new Search Attribute (type Date) called DATE OCCURRED (DD-MON-YY).
Went back to REPORTS source previously defined and added a new Table Column Mapping - mapping OBSDATE to the newly defined DATE OCCURRED (DD-MON-YY) search attribute.
I then modified the Schedule for the REPORTS source Crawler Policy to “Process All Documents”.
Schedule crawls and indexes entire REPORTS table.
In SES Advanced Search page, I enter my search keyword, select Specific Source Group as REPORTS, select All Match, and used the pick list to select the DATE OCCURRED (DD-MON-YY) Attribute Name, operator of Greater than equal, and entered the Value 01-JAN-07. Then the second attribute name of DATE_OCCURRED (DD-MON-YY), less than equals, 10-JAN-07.
Search results gave me 38,000 documents, and the first 25 I looked at had dates NOT within the 01-JAN-07 / 10-JAN-07 range. (e.g. OBSDATE= 10-MAR-07, 22-SEP-07, 02-FEB-08, etc.)
And, none of the results I opened had ANY dates within the SUMMARY CLOB…in case that’s what was being found in the search.
Can someone help me figure out how to allow my client to search for specific dated records in a db table using a single column for the date? This is a major requirement and they are anxiously awaiting my solution.
Thanks very much, in advance….

raford,
Thanks very much for your reply. However, from what I've read in the SES Admin Document is that (I think) the date format DD/MM/YYYY pertains only to searches on "file system" sources (e.g. Word, Excel, Powerpoint, PDF, etc.). We have 3 file system sources among our 25 total sources. The remaining 22 sources are all TABLE or DATABASE sources. The DBA here has done a great job getting the data standardized using the typical/default Oracle DATE type format in our TABLE sources (DD-MON-YY). Our tables have anywhere from 1500 rows to 2 million rows.
I tested your theory that the dates we are entering are being changed to Strings behind the scenes and on the Advanced Page, searched for results using OBSDATE equals 01/02/2007 in an attempt to find data that I know for certain to be in the mapped OBSDATE table column as 01-FEB-07. My result set contained data that had an OBSDATE of 03-MAR-07 and none containing 01-FEB-07.
Here is the big issue...in order for my client to fulfill his primary mission, one of the top 5 requirements is that he/she be able to find specific table rows that are contain a specific date or range of dates.
thanks very much!

Need help with output type EDI for ERS

All,
I want to be able to run and ERS settlement and have the invoices created sent via EDI/XML to the supplier.   I have several questions on the set up.
1) I have output type ERS6 which is defined as ERS EDI. I assume because it does not start with Z* this is SAP standard, so I shouldn't have to modify any of this.
2) I've added my supplier to this output type.
3) I assume I need to create a partner profile for this supplier? If so can someone tell me the message type to use?
Is there any set up I'm missing in this process?   I've executed ERS but do not get an idoc and I'm fairly certain it's because I haven't done the partner profile set-up.
Thanks for your help.
Sandra

Hi,
You don't have to modify thise setup unless you have any customized requirement.
You are missing partner profile setup.Carry out the setup and run MRRL tcode to create the idocs
Enter the following values using tcode WE20.
Field                                       Value
Message type                         GSVERF
Partner type                             LI (vendor)
Partner function                        LF (vendor)
Port                                         SUBSYSTEM ( Port to your middleware)
Output mode                            such as Collect IDocs
Basic type                                GSVERF01
Application                                 MR
Output type                                ERS6 or the type you have defined
Regards,
Karuna

I NEED HELP WITH THE SIZE OF MY WINDOW ON IPHOTO 08'

Hi, I have had my mac for a while now and I was wondering if somene could help.
I know it is alot different then other computers when choosing the size of the appearence of windows on the screen. I have been using iphoto for a while and when I first started using it the application only took up half of the screen (when fully opened) which i was really happy about since it made it easy for my to drag and drop onto my desktop. The other day I clicked the green button in the top left corner to make it bigger, as I thought it would help with what I wanted to do.
My problem is.. now when I go to click the green button to shrink it down to half the size again it does not work. I am wondering if there is something wrong? or is it just always supposed to be this way? I am hoping not as i really liked having it in a smaller window. please help
thanks, katie

Welcome to the Apple Discussions.
You can resize any window on a Mac simply by grabbing the lower right hand corner and dragging.
Regards
TD

Need help with two-factor auth for windows logon using CSS

Similar Messages

Maybe you are looking for