Need help with understanding HD
Just picked up a new HD video camera and it seems technology has played a trick on me.
my Sony HD camcorder imorts the file as a .m2ts file
When imported in Adobe Orgnizer Elements - preview looks skinny and "squished"
It seems like the camcorder has a preference to video a whole bunch of stuff and then burn it to DVD in high def or normal resoluition - whereas I like to record by clips, organize them, and then add into Ppremier Elements as needed. So I really don't understand what to do or how to do it, to get the results i need?
Do i need to manually convert each .m2ts file into an .avi?
When I open a HD clip inpremier, the size is right, but preview is all blurry and jumpy?
What is the best way for me to take one of my clips and have it ready to insert in a movie?
Thanks - any help would be appreciated.
This is aimed at Premiere Pro, but may help
A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with the DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1
Similar Messages
-
Need help with understanding updates, partitions, firmware etc.
I went to update my QuickTime and in doing so was told to update my OS which included QT updates. Now I'm getting all kinds of messages about partitions, firmware etc. do not understand at all what's going on.
THIS IS MY STEP BY STEP situation with my updates:
I go to the Apple Icon and selected Software Update and it reads I have 2 items:
MacBook EFI Firmware Update 1.2
MacBook SMC Firmware Update 1.4
I select Install and then it state Installs completed successfully.
BUT THEN I recieve and new icon and this message below:
To update the SMC firmware on your MacBook:
Your computer's power cord must be connected and plugged into a working power source, or your battery must be at least 25% charged.
For more information see 'http://support.apple.com/kb/TS3499'.
1. Quit all other open applications.
2. Click Restart in the MacBook SMC Firmware Update window and wait for your computer to restart.
The SMC firmware update starts automatically. A status bar indicates the progress of the update. During the update your computer fans will run at full speed, but will return to normal once the update completes.
Important: Do not interrupt the update.
Your computer restarts automatically when the update is completed and opens the MacBook SMC Firmware Update.
3. Click OK. The SMC firmware is now up-to-date.
If these instructions appear on your screen again, the SMC firmware update was not successful. Repeat steps 2 and 3.
I follow the instructions and then I get this: (could get my image to attach but here's what it said)
the first error message heading of:
MacBook SMC Firmware Update 1.4
Your firmware could not be updated, the hard drive partition scheme may not be supported. You must be booted from a GUID partition or RAID scheme.
see http://support.apple.com/kb/HT2434 for more information (internal error 28:3)
THEN ANOTHER ONE POPS UP saying:
Your Hard Drive partition scheme is not supported, you must be booted from a GUID partition scheme.
see http://docs.info.apple.com/article.html? artnum=303609 for more information
I went to those URL and tried to understand what it was telling me but I did not understand. I can't figure, by reading thru forums, etc, if I need to do this or not and what exactly it is.
So back to just pushing a simplet update has thrown all this unknown info. my way and I have no clue what to do.
Thank you. Hope this is more clear. -
Need help with understanding the link between jndi and data source
When I am trying to deploy my ear file. I am getting the error mentioned below.
I have made a connection pool and 3 data sources at console. Is there a problem
with the way I have defined them. Please do let me know.
Thank You
Ronak Parekh
Connection Pools:
Name : oraclePool
URL : jdbc:weblogic:builder
Driver classname : weblogic.jdbc.oci.Driver
Properties(key=values): servername=ronakserver
user=sempsys
dataSourceName=oraclePool
databaseName=builder
Password : sempsys
Data Sources:
Name : Gangster
JNDI Name: Gangster
Pool Name: oraclePool
Name : Organization
JNDI Name: Organization
Pool Name: oraclePool
Name : Job
JNDI Name: Job
Pool Name: oraclePool
My Error is:
preparing application app10 on ronserver
prepared application app10 on ronserver
activating application app10 on ronserver
Exception caught for task Activate application app10 on ronserver: activate failed
forsempire_bc.jar
Module, sempire_bc.jar, reported error: Exception activating module: EJBModule(sempire_bc.jar,status=PREPARED)
Unable to deploy EJB: OrganizationEJB from sempire_bc.jar:
weblogic.ejb20.WLDeploymentException: The DataSource with the JNDI name: Organization
could not be located. Please ensure that the DataSource has been deployed successfully
and that the JNDI name in your EJB Deployment descriptor is correct.
at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.setup(RDBMSPersistenceManager.java:130)
at weblogic.ejb20.manager.BaseEntityManager.setupPM(BaseEntityManager.java:214)
at weblogic.ejb20.manager.BaseEntityManager.setup(BaseEntityManager.java:186)
at weblogic.ejb20.manager.DBManager.setup(DBManager.java:161)
at weblogic.ejb20.deployer.ClientDrivenBeanInfoImpl.activate(ClientDrivenBeanInfoImpl.java:936)
at weblogic.ejb20.deployer.EJBDeployer.activate(EJBDeployer.java:1302)
at weblogic.ejb20.deployer.EJBModule.activate(EJBModule.java:342)
at weblogic.j2ee.J2EEApplicationContainer.activateModule(J2EEApplicationContainer.java:1534)
at weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContainer.java:991)
at weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContainer.java:978)
at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:1104)
at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:724)
at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)
failed application app10 on ronserver
My ejb-jar.xml file is:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ejb-jar PUBLIC
"-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN"
"http://java.sun.com/dtd/ejb-jar_2_0.dtd">
<ejb-jar>
<display-name>Business Component CMP 2.0</display-name>
<enterprise-beans>
<entity>
<display-name>Gangster Entity Bean</display-name>
<ejb-name>GangsterEJB</ejb-name>
<local-home>com.sempire.builder.business_component.GangsterHome</local-home>
<local>com.sempire.builder.business_component.Gangster</local>
<ejb-class>com.sempire.builder.business_component.GangsterBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.Integer</prim-key-class>
<reentrant>False</reentrant>
<cmp-version>2.x</cmp-version>
<cmp-field><field-name>iD</field-name></cmp-field>
<cmp-field><field-name>name</field-name></cmp-field>
<cmp-field><field-name>nickname</field-name></cmp-field>
<cmp-field><field-name>badness</field-name></cmp-field>
<primkey-field>iD</primkey-field>
<env-entry>
<env-entry-name>GANGSTER</env-entry-name>
<env-entry-type>java.lang.String</env-entry-type>
<env-entry-value>Gangster</env-entry-value>
</env-entry>
<env-entry>
<env-entry-name>oraclePool</env-entry-name>
<env-entry-type>java.lang.String</env-entry-type>
<env-entry-value>oraclePool</env-entry-value>
</env-entry>
<resource-ref>
<res-ref-name>jdbc/Gangster</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</entity>
<entity>
<display-name>Organization Entity Bean</display-name>
<ejb-name>OrganizationEJB</ejb-name>
<local-home>com.sempire.builder.business_component.OrganizationHome</local-home>
<local>com.sempire.builder.business_component.Organization</local>
<ejb-class>com.sempire.builder.business_component.OrganizationBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.Integer</prim-key-class>
<reentrant>False</reentrant>
<cmp-version>2.x</cmp-version>
<cmp-field><field-name>iD</field-name></cmp-field>
<cmp-field><field-name>name</field-name></cmp-field>
<cmp-field><field-name>description</field-name></cmp-field>
<primkey-field>iD</primkey-field>
<env-entry>
<env-entry-name>ORGANIZATION</env-entry-name>
<env-entry-type>java.lang.String</env-entry-type>
<env-entry-value>Organization</env-entry-value>
</env-entry>
<env-entry>
<env-entry-name>oraclePool</env-entry-name>
<env-entry-type>java.lang.String</env-entry-type>
<env-entry-value>oraclePool</env-entry-value>
</env-entry>
<resource-ref>
<res-ref-name>jdbc/Organization</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</entity>
<entity>
<display-name>Job Entity Bean</display-name>
<ejb-name>JobEJB</ejb-name>
<local-home>com.sempire.builder.business_component.JobHome</local-home>
<local>com.sempire.builder.business_component.Job</local>
<ejb-class>com.sempire.builder.business_component.JobBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.Integer</prim-key-class>
<reentrant>False</reentrant>
<cmp-version>2.x</cmp-version>
<cmp-field><field-name>iD</field-name></cmp-field>
<cmp-field><field-name>name</field-name></cmp-field>
<cmp-field><field-name>score</field-name></cmp-field>
<cmp-field><field-name>setupCost</field-name></cmp-field>
<primkey-field>iD</primkey-field>
<env-entry>
<env-entry-name>Job</env-entry-name>
<env-entry-type>java.lang.String</env-entry-type>
<env-entry-value>Job</env-entry-value>
</env-entry>
<env-entry>
<env-entry-name>oraclePool</env-entry-name>
<env-entry-type>java.lang.String</env-entry-type>
<env-entry-value>oraclePool</env-entry-value>
</env-entry>
<resource-ref>
<res-ref-name>jdbc/Job</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</entity>
</enterprise-beans>
<relationships>
<ejb-relation>
<ejb-relation-name>organization-memberGangsters</ejb-relation-name>
<ejb-relationship-role>
<ejb-relationship-role-name>organization---memberGangsters</ejb-relationship-role-name>
<multiplicity>One</multiplicity>
<relationship-role-source>
<ejb-name>OrganizationEJB</ejb-name>
</relationship-role-source>
<cmr-field>
<cmr-field-name>memberGangsters</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
<ejb-relationship-role>
<ejb-relationship-role-name>memberGangsters---organization</ejb-relationship-role-name>
<multiplicity>Many</multiplicity>
<cascade-delete/>
<relationship-role-source>
<ejb-name>GangsterEJB</ejb-name>
</relationship-role-source>
<cmr-field>
<cmr-field-name>organization</cmr-field-name>
</cmr-field>
</ejb-relationship-role>
</ejb-relation>
<ejb-relation>
<ejb-relation-name>gangsters-jobs</ejb-relation-name>
<ejb-relationship-role>
<ejb-relationship-role-name>gangsters---jobs</ejb-relationship-role-name>
<multiplicity>Many</multiplicity>
<relationship-role-source>
<ejb-name>GangsterEJB</ejb-name>
</relationship-role-source>
<cmr-field>
<cmr-field-name>jobs</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
<ejb-relationship-role>
<ejb-relationship-role-name>jobs---gangsters</ejb-relationship-role-name>
<multiplicity>Many</multiplicity>
<relationship-role-source>
<ejb-name>JobEJB</ejb-name>
</relationship-role-source>
<cmr-field>
<cmr-field-name>gangsters</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
</ejb-relation>
<ejb-relation>
<ejb-relation-name>organization-theBoss</ejb-relation-name>
<ejb-relationship-role>
<ejb-relationship-role-name>organization---theBoss</ejb-relationship-role-name>
<multiplicity>One</multiplicity>
<relationship-role-source>
<ejb-name>OrganizationEJB</ejb-name>
</relationship-role-source>
<cmr-field>
<cmr-field-name>theBoss</cmr-field-name>
</cmr-field>
</ejb-relationship-role>
<ejb-relationship-role>
<ejb-relationship-role-name>theBoss---organization</ejb-relationship-role-name>
<multiplicity>One</multiplicity>
<relationship-role-source>
<ejb-name>GangsterEJB</ejb-name>
</relationship-role-source>
</ejb-relationship-role>
</ejb-relation>
</relationships>
<assembly-descriptor>
<container-transaction>
<method>
<ejb-name>GangsterEJB</ejb-name>
<method-name>*</method-name>
</method>
<method>
<ejb-name>OrganizationEJB</ejb-name>
<method-name>*</method-name>
</method>
<method>
<ejb-name>JobEJB</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
</assembly-descriptor>
</ejb-jar>
My weblogic-ejb-jar.xml is:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE weblogic-ejb-jar PUBLIC
'-//BEA Systems, Inc.//DTD WebLogic 7.0.0 EJB//EN'
'http://www.bea.com/servers/wls700/dtd/weblogic-ejb-jar.dtd'>
<weblogic-ejb-jar>
<weblogic-enterprise-bean>
<ejb-name>GangsterEJB</ejb-name>
<entity-descriptor>
<persistence>
<persistence-use>
<type-identifier>WebLogic_CMP_RDBMS</type-identifier>
<type-version>6.0</type-version>
<type-storage>META-INF/weblogic-cmp-rdbms-jar.xml</type-storage>
</persistence-use>
</persistence>
</entity-descriptor>
<reference-descriptor>
<resource-description>
<res-ref-name>jdbc/Gangster</res-ref-name>
<jndi-name>oraclePool</jndi-name>
</resource-description>
</reference-descriptor>
<jndi-name>Gangster</jndi-name>
</weblogic-enterprise-bean>
<weblogic-enterprise-bean>
<ejb-name>OrganizationEJB</ejb-name>
<entity-descriptor>
<persistence>
<persistence-use>
<type-identifier>WebLogic_CMP_RDBMS</type-identifier>
<type-version>6.0</type-version>
<type-storage>META-INF/weblogic-cmp-rdbms-jar.xml</type-storage>
</persistence-use>
</persistence>
</entity-descriptor>
<reference-descriptor>
<resource-description>
<res-ref-name>jdbc/Organization</res-ref-name>
<jndi-name>oraclePool</jndi-name>
</resource-description>
</reference-descriptor>
<jndi-name>Organization</jndi-name>
</weblogic-enterprise-bean>
<weblogic-enterprise-bean>
<ejb-name>JobEJB</ejb-name>
<entity-descriptor>
<persistence>
<persistence-use>
<type-identifier>WebLogic_CMP_RDBMS</type-identifier>
<type-version>6.0</type-version>
<type-storage>META-INF/weblogic-cmp-rdbms-jar.xml</type-storage>
</persistence-use>
</persistence>
</entity-descriptor>
<reference-descriptor>
<resource-description>
<res-ref-name>jdbc/Job</res-ref-name>
<jndi-name>oraclePool</jndi-name>
</resource-description>
</reference-descriptor>
<jndi-name>Job</jndi-name>
</weblogic-enterprise-bean>
</weblogic-ejb-jar>
My weblogic-cmp-rdbms-jar.xml file is:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE weblogic-rdbms-jar PUBLIC
'-//BEA Systems, Inc.//DTD WebLogic 7.0.0 EJB RDBMS Persistence//EN'
'http://www.bea.com/servers/wls700/dtd/weblogic-rdbms20-persistence-700.dtd'>
<weblogic-rdbms-jar>
<weblogic-rdbms-bean>
<ejb-name>GangsterEJB</ejb-name>
<data-source-name>Gangster</data-source-name>
<table-map>
<table-name>GANGSTER</table-name>
<field-map>
<cmp-field>iD</cmp-field>
<dbms-column>ID</dbms-column>
</field-map>
<field-map>
<cmp-field>name</cmp-field>
<dbms-column>NAME</dbms-column>
</field-map>
<field-map>
<cmp-field>nickname</cmp-field>
<dbms-column>NICKNAME</dbms-column>
</field-map>
<field-map>
<cmp-field>badness</cmp-field>
<dbms-column>BADNESS</dbms-column>
</field-map>
</table-map>
<weblogic-query>
<query-method>
<method-name>findAll</method-name>
<method-params></method-params>
</query-method>
</weblogic-query>
</weblogic-rdbms-bean>
<weblogic-rdbms-bean>
<ejb-name>OrganizationEJB</ejb-name>
<data-source-name>Organization</data-source-name>
<table-map>
<table-name>ORGANIZATION</table-name>
<field-map>
<cmp-field>iD</cmp-field>
<dbms-column>ID</dbms-column>
</field-map>
<field-map>
<cmp-field>name</cmp-field>
<dbms-column>NAME</dbms-column>
</field-map>
<field-map>
<cmp-field>description</cmp-field>
<dbms-column>DESCRIPTION</dbms-column>
</field-map>
</table-map>
<weblogic-query>
<query-method>
<method-name>findAll</method-name>
<method-params></method-params>
</query-method>
</weblogic-query>
</weblogic-rdbms-bean>
<weblogic-rdbms-bean>
<ejb-name>JobEJB</ejb-name>
<data-source-name>Job</data-source-name>
<table-map>
<table-name>JOB</table-name>
<field-map>
<cmp-field>iD</cmp-field>
<dbms-column>ID</dbms-column>
</field-map>
<field-map>
<cmp-field>name</cmp-field>
<dbms-column>NAME</dbms-column>
</field-map>
<field-map>
<cmp-field>score</cmp-field>
<dbms-column>SCORE</dbms-column>
</field-map>
<field-map>
<cmp-field>setupCost</cmp-field>
<dbms-column>SETUPCOST</dbms-column>
</field-map>
</table-map>
<weblogic-query>
<query-method>
<method-name>findAll</method-name>
<method-params></method-params>
</query-method>
</weblogic-query>
</weblogic-rdbms-bean>
<weblogic-rdbms-relation>
<relation-name>organization-memberGangsters</relation-name>
<weblogic-relationship-role>
<relationship-role-name>memberGangsters---organization</relationship-role-name>
<relationship-role-map>
<column-map>
<foreign-key-column>iD</foreign-key-column>
<key-column>ID</key-column>
</column-map>
</relationship-role-map>
</weblogic-relationship-role>
</weblogic-rdbms-relation>
<weblogic-rdbms-relation>
<relation-name>gangsters-jobs</relation-name>
<table-name>JOBS</table-name>
<weblogic-relationship-role>
<relationship-role-name>gangsters---jobs</relationship-role-name>
<relationship-role-map>
<column-map>
<foreign-key-column>iD</foreign-key-column>
<key-column>ID</key-column>
</column-map>
</relationship-role-map>
</weblogic-relationship-role>
<weblogic-relationship-role>
<relationship-role-name>jobs---gangsters</relationship-role-name>
<relationship-role-map>
<column-map>
<foreign-key-column>iD</foreign-key-column>
<key-column>ID</key-column>
</column-map>
</relationship-role-map>
</weblogic-relationship-role>
</weblogic-rdbms-relation>
<weblogic-rdbms-relation>
<relation-name>organization-theBoss</relation-name>
<weblogic-relationship-role>
<relationship-role-name>organization---theBoss</relationship-role-name>
<relationship-role-map>
<column-map>
<foreign-key-column>iD</foreign-key-column>
<key-column>ID</key-column>
</column-map>
</relationship-role-map>
</weblogic-relationship-role>
</weblogic-rdbms-relation>
</weblogic-rdbms-jar>The problem I see is wrong url for jDriver.
you have to say: jdbc:weblogic:oracle
In properties what you need is:
user=
password=
server=
Actually, your connetion pool is not created yet. It has problems. Make sure you create connectionpool successfully
first.
Thanks,
Mitesh
ronak wrote:
When I am trying to deploy my ear file. I am getting the error mentioned below.
I have made a connection pool and 3 data sources at console. Is there a problem
with the way I have defined them. Please do let me know.
Thank You
Ronak Parekh
Connection Pools:
Name : oraclePool
URL : jdbc:weblogic:builder
Driver classname : weblogic.jdbc.oci.Driver
Properties(key=values): servername=ronakserver
user=sempsys
dataSourceName=oraclePool
databaseName=builder
Password : sempsys
Data Sources:
Name : Gangster
JNDI Name: Gangster
Pool Name: oraclePool
Name : Organization
JNDI Name: Organization
Pool Name: oraclePool
Name : Job
JNDI Name: Job
Pool Name: oraclePool
My Error is:
preparing application app10 on ronserver
prepared application app10 on ronserver
activating application app10 on ronserver
Exception caught for task Activate application app10 on ronserver: activate failed
forsempire_bc.jar
Module, sempire_bc.jar, reported error: Exception activating module: EJBModule(sempire_bc.jar,status=PREPARED)
Unable to deploy EJB: OrganizationEJB from sempire_bc.jar:
weblogic.ejb20.WLDeploymentException: The DataSource with the JNDI name: Organization
could not be located. Please ensure that the DataSource has been deployed successfully
and that the JNDI name in your EJB Deployment descriptor is correct.
at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.setup(RDBMSPersistenceManager.java:130)
at weblogic.ejb20.manager.BaseEntityManager.setupPM(BaseEntityManager.java:214)
at weblogic.ejb20.manager.BaseEntityManager.setup(BaseEntityManager.java:186)
at weblogic.ejb20.manager.DBManager.setup(DBManager.java:161)
at weblogic.ejb20.deployer.ClientDrivenBeanInfoImpl.activate(ClientDrivenBeanInfoImpl.java:936)
at weblogic.ejb20.deployer.EJBDeployer.activate(EJBDeployer.java:1302)
at weblogic.ejb20.deployer.EJBModule.activate(EJBModule.java:342)
at weblogic.j2ee.J2EEApplicationContainer.activateModule(J2EEApplicationContainer.java:1534)
at weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContainer.java:991)
at weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContainer.java:978)
at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:1104)
at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:724)
at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)
failed application app10 on ronserver
My ejb-jar.xml file is:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ejb-jar PUBLIC
"-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN"
"http://java.sun.com/dtd/ejb-jar_2_0.dtd">
<ejb-jar>
<display-name>Business Component CMP 2.0</display-name>
<enterprise-beans>
<entity>
<display-name>Gangster Entity Bean</display-name>
<ejb-name>GangsterEJB</ejb-name>
<local-home>com.sempire.builder.business_component.GangsterHome</local-home>
<local>com.sempire.builder.business_component.Gangster</local>
<ejb-class>com.sempire.builder.business_component.GangsterBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.Integer</prim-key-class>
<reentrant>False</reentrant>
<cmp-version>2.x</cmp-version>
<cmp-field><field-name>iD</field-name></cmp-field>
<cmp-field><field-name>name</field-name></cmp-field>
<cmp-field><field-name>nickname</field-name></cmp-field>
<cmp-field><field-name>badness</field-name></cmp-field>
<primkey-field>iD</primkey-field>
<env-entry>
<env-entry-name>GANGSTER</env-entry-name>
<env-entry-type>java.lang.String</env-entry-type>
<env-entry-value>Gangster</env-entry-value>
</env-entry>
<env-entry>
<env-entry-name>oraclePool</env-entry-name>
<env-entry-type>java.lang.String</env-entry-type>
<env-entry-value>oraclePool</env-entry-value>
</env-entry>
<resource-ref>
<res-ref-name>jdbc/Gangster</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</entity>
<entity>
<display-name>Organization Entity Bean</display-name>
<ejb-name>OrganizationEJB</ejb-name>
<local-home>com.sempire.builder.business_component.OrganizationHome</local-home>
<local>com.sempire.builder.business_component.Organization</local>
<ejb-class>com.sempire.builder.business_component.OrganizationBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.Integer</prim-key-class>
<reentrant>False</reentrant>
<cmp-version>2.x</cmp-version>
<cmp-field><field-name>iD</field-name></cmp-field>
<cmp-field><field-name>name</field-name></cmp-field>
<cmp-field><field-name>description</field-name></cmp-field>
<primkey-field>iD</primkey-field>
<env-entry>
<env-entry-name>ORGANIZATION</env-entry-name>
<env-entry-type>java.lang.String</env-entry-type>
<env-entry-value>Organization</env-entry-value>
</env-entry>
<env-entry>
<env-entry-name>oraclePool</env-entry-name>
<env-entry-type>java.lang.String</env-entry-type>
<env-entry-value>oraclePool</env-entry-value>
</env-entry>
<resource-ref>
<res-ref-name>jdbc/Organization</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</entity>
<entity>
<display-name>Job Entity Bean</display-name>
<ejb-name>JobEJB</ejb-name>
<local-home>com.sempire.builder.business_component.JobHome</local-home>
<local>com.sempire.builder.business_component.Job</local>
<ejb-class>com.sempire.builder.business_component.JobBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.Integer</prim-key-class>
<reentrant>False</reentrant>
<cmp-version>2.x</cmp-version>
<cmp-field><field-name>iD</field-name></cmp-field>
<cmp-field><field-name>name</field-name></cmp-field>
<cmp-field><field-name>score</field-name></cmp-field>
<cmp-field><field-name>setupCost</field-name></cmp-field>
<primkey-field>iD</primkey-field>
<env-entry>
<env-entry-name>Job</env-entry-name>
<env-entry-type>java.lang.String</env-entry-type>
<env-entry-value>Job</env-entry-value>
</env-entry>
<env-entry>
<env-entry-name>oraclePool</env-entry-name>
<env-entry-type>java.lang.String</env-entry-type>
<env-entry-value>oraclePool</env-entry-value>
</env-entry>
<resource-ref>
<res-ref-name>jdbc/Job</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</entity>
</enterprise-beans>
<relationships>
<ejb-relation>
<ejb-relation-name>organization-memberGangsters</ejb-relation-name>
<ejb-relationship-role>
<ejb-relationship-role-name>organization---memberGangsters</ejb-relationship-role-name>
<multiplicity>One</multiplicity>
<relationship-role-source>
<ejb-name>OrganizationEJB</ejb-name>
</relationship-role-source>
<cmr-field>
<cmr-field-name>memberGangsters</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
<ejb-relationship-role>
<ejb-relationship-role-name>memberGangsters---organization</ejb-relationship-role-name>
<multiplicity>Many</multiplicity>
<cascade-delete/>
<relationship-role-source>
<ejb-name>GangsterEJB</ejb-name>
</relationship-role-source>
<cmr-field>
<cmr-field-name>organization</cmr-field-name>
</cmr-field>
</ejb-relationship-role>
</ejb-relation>
<ejb-relation>
<ejb-relation-name>gangsters-jobs</ejb-relation-name>
<ejb-relationship-role>
<ejb-relationship-role-name>gangsters---jobs</ejb-relationship-role-name>
<multiplicity>Many</multiplicity>
<relationship-role-source>
<ejb-name>GangsterEJB</ejb-name>
</relationship-role-source>
<cmr-field>
<cmr-field-name>jobs</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
<ejb-relationship-role>
<ejb-relationship-role-name>jobs---gangsters</ejb-relationship-role-name>
<multiplicity>Many</multiplicity>
<relationship-role-source>
<ejb-name>JobEJB</ejb-name>
</relationship-role-source>
<cmr-field>
<cmr-field-name>gangsters</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
</ejb-relation>
<ejb-relation>
<ejb-relation-name>organization-theBoss</ejb-relation-name>
<ejb-relationship-role>
<ejb-relationship-role-name>organization---theBoss</ejb-relationship-role-name>
<multiplicity>One</multiplicity>
<relationship-role-source>
<ejb-name>OrganizationEJB</ejb-name>
</relationship-role-source>
<cmr-field>
<cmr-field-name>theBoss</cmr-field-name>
</cmr-field>
</ejb-relationship-role>
<ejb-relationship-role>
<ejb-relationship-role-name>theBoss---organization</ejb-relationship-role-name>
<multiplicity>One</multiplicity>
<relationship-role-source>
<ejb-name>GangsterEJB</ejb-name>
</relationship-role-source>
</ejb-relationship-role>
</ejb-relation>
</relationships>
<assembly-descriptor>
<container-transaction>
<method>
<ejb-name>GangsterEJB</ejb-name>
<method-name>*</method-name>
</method>
<method>
<ejb-name>OrganizationEJB</ejb-name>
<method-name>*</method-name>
</method>
<method>
<ejb-name>JobEJB</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
</assembly-descriptor>
</ejb-jar>
My weblogic-ejb-jar.xml is:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE weblogic-ejb-jar PUBLIC
'-//BEA Systems, Inc.//DTD WebLogic 7.0.0 EJB//EN'
'http://www.bea.com/servers/wls700/dtd/weblogic-ejb-jar.dtd'>
<weblogic-ejb-jar>
<weblogic-enterprise-bean>
<ejb-name>GangsterEJB</ejb-name>
<entity-descriptor>
<persistence>
<persistence-use>
<type-identifier>WebLogic_CMP_RDBMS</type-identifier>
<type-version>6.0</type-version>
<type-storage>META-INF/weblogic-cmp-rdbms-jar.xml</type-storage>
</persistence-use>
</persistence>
</entity-descriptor>
<reference-descriptor>
<resource-description>
<res-ref-name>jdbc/Gangster</res-ref-name>
<jndi-name>oraclePool</jndi-name>
</resource-description>
</reference-descriptor>
<jndi-name>Gangster</jndi-name>
</weblogic-enterprise-bean>
<weblogic-enterprise-bean>
<ejb-name>OrganizationEJB</ejb-name>
<entity-descriptor>
<persistence>
<persistence-use>
<type-identifier>WebLogic_CMP_RDBMS</type-identifier>
<type-version>6.0</type-version>
<type-storage>META-INF/weblogic-cmp-rdbms-jar.xml</type-storage>
</persistence-use>
</persistence>
</entity-descriptor>
<reference-descriptor>
<resource-description>
<res-ref-name>jdbc/Organization</res-ref-name>
<jndi-name>oraclePool</jndi-name>
</resource-description>
</reference-descriptor>
<jndi-name>Organization</jndi-name>
</weblogic-enterprise-bean>
<weblogic-enterprise-bean>
<ejb-name>JobEJB</ejb-name>
<entity-descriptor>
<persistence>
<persistence-use>
<type-identifier>WebLogic_CMP_RDBMS</type-identifier>
<type-version>6.0</type-version>
<type-storage>META-INF/weblogic-cmp-rdbms-jar.xml</type-storage>
</persistence-use>
</persistence>
</entity-descriptor>
<reference-descriptor>
<resource-description>
<res-ref-name>jdbc/Job</res-ref-name>
<jndi-name>oraclePool</jndi-name>
</resource-description>
</reference-descriptor>
<jndi-name>Job</jndi-name>
</weblogic-enterprise-bean>
</weblogic-ejb-jar>
My weblogic-cmp-rdbms-jar.xml file is:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE weblogic-rdbms-jar PUBLIC
'-//BEA Systems, Inc.//DTD WebLogic 7.0.0 EJB RDBMS Persistence//EN'
'http://www.bea.com/servers/wls700/dtd/weblogic-rdbms20-persistence-700.dtd'>
<weblogic-rdbms-jar>
<weblogic-rdbms-bean>
<ejb-name>GangsterEJB</ejb-name>
<data-source-name>Gangster</data-source-name>
<table-map>
<table-name>GANGSTER</table-name>
<field-map>
<cmp-field>iD</cmp-field>
<dbms-column>ID</dbms-column>
</field-map>
<field-map>
<cmp-field>name</cmp-field>
<dbms-column>NAME</dbms-column>
</field-map>
<field-map>
<cmp-field>nickname</cmp-field>
<dbms-column>NICKNAME</dbms-column>
</field-map>
<field-map>
<cmp-field>badness</cmp-field>
<dbms-column>BADNESS</dbms-column>
</field-map>
</table-map>
<weblogic-query>
<query-method>
<method-name>findAll</method-name>
<method-params></method-params>
</query-method>
</weblogic-query>
</weblogic-rdbms-bean>
<weblogic-rdbms-bean>
<ejb-name>OrganizationEJB</ejb-name>
<data-source-name>Organization</data-source-name>
<table-map>
<table-name>ORGANIZATION</table-name>
<field-map>
<cmp-field>iD</cmp-field>
<dbms-column>ID</dbms-column>
</field-map>
<field-map>
<cmp-field>name</cmp-field>
<dbms-column>NAME</dbms-column>
</field-map>
<field-map>
<cmp-field>description</cmp-field>
<dbms-column>DESCRIPTION</dbms-column>
</field-map>
</table-map>
<weblogic-query>
<query-method>
<method-name>findAll</method-name>
<method-params></method-params>
</query-method>
</weblogic-query>
</weblogic-rdbms-bean>
<weblogic-rdbms-bean>
<ejb-name>JobEJB</ejb-name>
<data-source-name>Job</data-source-name>
<table-map>
<table-name>JOB</table-name>
<field-map>
<cmp-field>iD</cmp-field>
<dbms-column>ID</dbms-column>
</field-map>
<field-map>
<cmp-field>name</cmp-field>
<dbms-column>NAME</dbms-column>
</field-map>
<field-map>
<cmp-field>score</cmp-field>
<dbms-column>SCORE</dbms-column>
</field-map>
<field-map>
<cmp-field>setupCost</cmp-field>
<dbms-column>SETUPCOST</dbms-column>
</field-map>
</table-map>
<weblogic-query>
<query-method>
<method-name>findAll</method-name>
<method-params></method-params>
</query-method>
</weblogic-query>
</weblogic-rdbms-bean>
<weblogic-rdbms-relation>
<relation-name>organization-memberGangsters</relation-name>
<weblogic-relationship-role>
<relationship-role-name>memberGangsters---organization</relationship-role-name>
<relationship-role-map>
<column-map>
<foreign-key-column>iD</foreign-key-column>
<key-column>ID</key-column>
</column-map>
</relationship-role-map>
</weblogic-relationship-role>
</weblogic-rdbms-relation>
<weblogic-rdbms-relation>
<relation-name>gangsters-jobs</relation-name>
<table-name>JOBS</table-name>
<weblogic-relationship-role>
<relationship-role-name>gangsters---jobs</relationship-role-name>
<relationship-role-map>
<column-map>
<foreign-key-column>iD</foreign-key-column>
<key-column>ID</key-column>
</column-map>
</relationship-role-map>
</weblogic-relationship-role>
<weblogic-relationship-role>
<relationship-role-name>jobs---gangsters</relationship-role-name>
<relationship-role-map>
<column-map>
<foreign-key-column>iD</foreign-key-column>
<key-column>ID</key-column>
</column-map>
</relationship-role-map>
</weblogic-relationship-role>
</weblogic-rdbms-relation>
<weblogic-rdbms-relation>
<relation-name>organization-theBoss</relation-name>
<weblogic-relationship-role>
<relationship-role-name>organization---theBoss</relationship-role-name>
<relationship-role-map>
<column-map>
<foreign-key-column>iD</foreign-key-column>
<key-column>ID</key-column>
</column-map>
</relationship-role-map>
</weblogic-relationship-role>
</weblogic-rdbms-relation>
</weblogic-rdbms-jar> -
Need help with understanding static vs dhcp on wrt54g router
I currently have a NAS200 device attached to my WRT54G router. The WRT54G is in DHCP mode so as to allow my various laptops and cameras to be accessed over the internet. What happens is that when I have a power failure the NAS200 is given a new ip address even though its plugged into a service port. I am then forced to go into the router and change the port mapping to whatever port the router has given to the NAS. Is there any way to keep the NAS200 at a specific ip address regardless of router resets. Thanks Hexmate
You have to set the static IP address on the NAS. The NAS is currently configured to use DHCP. Change it there to set a specific static IP address. The router itself does not have to option to set a fixed IP address to a specific device via DHCP.
For static IP addresses make sure to choose an IP address which is not used by any other device nor is inside the DHCP server address pool of the router. With default configuration a Linksys router uses 192.168.1.1 and the DHCP server uses 192.168.1.100-149, thus you have addresses 192.168.1.2-99 and 150-254 available.
Use an static IP address like 192.168.1.50, netmask 255.255.255.0, gateway 192.168.1.1 (if the NAS needs internet, e.g. for time synchronization) and DNS 192.168.1.1. That should do it. Again: this has to be done on the NAS device. The router has no option for that. -
Need help with understanding Skype Number please
Hi there,
Not sure if this is posted twice!
I live in the UK and am trying to offer online coaching through a company in America. I can only offer live chat sessions if I have a US or Canadian number. Is it a Skype Number that I need? Why would it matter which State I choose - will people only be able to contact me from that State?
Would be really grateful for some clarity.
Many thanks,
Solved!
Go to Solution.Hi, Tracy255, and welcome to the Community,
Unfortunately, for several reasons, Skype Numbers are not available in Canada.
The concept of any virtual number is to provide a way for people who do not have accounts on the service to contact the subscriber, but using a fixed line or land line number. In the case of Skype Numbers in the United States, the best scenario would be to have a number set up where most of your customers would be able to call without incurring high toll charges or ideally no toll charges. Of note, not all states participate in the Skype Number program, again for any number of legitimate reasons.
Skype does not offer "toll-free" numbers.
Here is a link to the library of FAQ articles related to Skype Numbers seeing as I believe you will have more questions than I have provided information for!
https://support.skype.com/en/category/ONLINE_NUMBER_SKYPEIN/
Please pardon the naming convention confusion; today's Skype Numbers where formerly known as Online Numbers or Skype In.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often! -
Need help with a currently "in-use" form we want to switch to Adobes hosting service
Hi, I am in desperate need of help with some issues concerning several forms which we currently use a paid third party (not Adobe) to host and "re-distribute through email"...Somehow I got charged $14.95 for YOUR service, (signed up for a trial, but never used it)..and now I am paying for a year of use of the similar service which Adobe is in control of. I might want to port my form distribution through Adobe in the hopes of reducing the errors, problems and hassles my customers are experiencing when some of them push our "submit button". (and I guess I am familiar with these somewhat from reading what IS available in here, and I also know that, Adobe is working to alleviate some of these " submit" issues, so let's don't start by going backwards, here) I need solutions now for my issues or I can leave it as is, If Adobe's solution will be no better for my end users...
We used FormsCentral to code these forms and it works for the most part (if the end-user can co-operate, and thats iffy, sometimes), but I need help with how to make it go through your servers (and not the third party folks we use now), Not being cruel or racist here, but your over the phone "support techs" are about horrible & I cannot understand them or work with any of them, so I would definitely need someone who speaks English and can understand the nuances of programming these forms, to please contact me back. (Sorry, but both those attributes will be required to be able to help me, so, no "newbie-interns" or first week trainees are gonna cut it).... If you have anyone who fits the bill on those items and would be willing to help us, please contact me back at your earliest convenience. If we have to communicate here, I will do that & I can submit whatever we need to & to whoever we need to.
I need to get this right and working for the majority of my users and on any platform and OS.
You may certainly call me to talk about this, and I have given my number numerous times to your (expletive deleted) time wasting - recording message thingy. So, If it's not available look it up under [email protected]
(and you will probably get right to me, unlike my and I'm sure most other folks', "Adobe phone-in experiences")
Thank You,
Michael Corman
VinylCouture
Phenix City, Alabama 36869Well, thanks for writing back...just so you know...I started using Adobe products in 1987, ...yeah...back then...like Illustrator 1 & 9" B&W Macs ...John Warnock's Helvetica's....stuff like that...8.5 x 11 LaserWriters...all that good stuff...I still have some of it working on a mac...much of it was stuff I bought. some stuff I did not...I'm not a big fan of this "cloud" thing Adobe has foisted upon the creatives of the world...which I'm sure you can tell...but the functionality and usefulness of your software can not be disputed, so feel free to do whatever we will continue to pay for, ...I am very impressed with CC PS on the 64 bit PC and perhaps I will end up paying you the stipend that you demand for the other services.
So I guess that brings us to our problem.. a few years back and at the height of the recession and near bankruptcy myself, I was damn lucky and hit on something and began a small arts and crafts supply service to sell my products online to a very "niche market" ...I had a unique product and still sell that product (plus others) online...My website is www.vinylcouture.com...Strange? Yes...but there is a market it seems, for everything now, and this is the market I service...Catagorically, these are 99%+ women that use these "adhesive, sticky backed vinyl products" to make different "craft items" that are just way too various and numerous to go into... generally older women, women who are computer illiterate for the most part...and all this is irrelevant to my problem, but I want you to have every bit of background on this and especially the demographic we are dealing with, so we can get right to the meat of the problem.
OK...So about two years ago, I decided to offer a "plain sheet" product of a plain colored "stick back" vinyl... it is available in multiple quantities of packs ( like 5 pieces, 10 pieces, 15 pieces, in a packi & so on)...and if you are still on my site.. go to any "GO RIGHT TO OUR ORDER PAGE" button, scroll down a little...and then to the "PLAIN VINYL" section...you will see the Weebly website order process.) You can back out from here, I think,..but, anyway this product is available in 63 colors + or - a few. So then the problem is, how do they select their individual colors within that (whatever) pack?... .
So my initial idea was to enable a "selection form" for these "colors" that would be transmitted to me via email as 'part" of the "order process".. We tried getting our customers to submit a " a list" ( something my competitiors still do, lol, poor bastards)......but that..is just unbelievable..I can't even begin to tell you what a freakin' nightmare that was...these people cannot even count to 10, much less any higher... figuring out what colors to list and send me... well, lets just say, it wasn't working......I had to figure out a better way...Something had to be done.
So after thinking this all out, and yeah...due to my total ignorance, i figured that we could make a form with Live Cycle Designer (Now Forms Central)...(back then something that was bundled with Adobe Acrobat Pro), I believe, and thats what this thing was authored in... and it would be all good...LOL!
Well not so simple...as you well know, Adobe Acrobat would NOT LET YOU EMAIL anything from itself.....it just wouldn't work (and I know why, and all that hooey), but not being one to take NO for answer,.I started looking for a way to make my little gizmo work.. So I found this company that said they can "hijack" (re-direct actually) the request to email, bypass the wah-wah, and re-transmit it to the proper parties.....for less than $100 a year, I think...its called http://pdf-fillableforms.com/.
A nice gentleman named Joseph Silva helped us program the thing to go to his servers and back out. Please dont hassle them...I need them...for now..it basically does work...try it...you should get back a copy of the form that you filled out...good luck however, if you're on MAC OSX or similar...
I have included a copy of both of our forms (and feel free to fill it out and play with it)...just put test somewhere on it...(and you must include YOUR email or it will balk)..they are supposed to be mostly identical, except one seems to be twice as large....generating a 1.7 meg file upon submission, while the other one only generates a 600K file or so...thats another issue for another day or maybe you can advise on that also...
OK so far so good......In our shop, once Grandma buys a 10 pack (or whatever), Only then she gets to the link on her receipt page ro the relevant "selection form" ,(this prevents "Filling and Sending" with "no order" and "no payment", another early problem we had)... which they can click on and it will usually download and open up on their device if all goes well...Then our little form is supposed to be fillable and is supposed to ADD UP all the quantities, so grandma knows how many she is buying and so forth right on the fly, and even while she changes her mind..., and IT'S LARGE so grandma can see it, and then it TOTALS it all up for them, ( cause remember, they can NOT add).., except there is a programming bug (mouse-click should be a mouse-up probably or something..) which makes you click in the blank spaces to get to a correct TOTAL...about 70-80% of our customers can enable all these features and usually the process completes without problems for them especially on PC's running Windows OS and Acrobat Reader X or XI...at least for most... Unfortunately it is still not the "seamless process" I would like or had envisioned for the other folks out there that do have trouble using our form.... Many folks report to us the following issues that we know of. First of all it takes too much time to load up...We know its HUGE...is there anyway that you can see, to streamline this thing? I would love for it to be more compact...this really helps on the phones and pads as I'm sure you well know.
Some just tell us,"it WON'T work"....I believe this is because they are totally out of it and dont even have Adobe Reader on their machine, & don't know how to get it ( yes, we provide the links).....or it's some ancient version....no one can stop this one...
It almost always generates some kind ( at least one time) of "error message" which we do warn them about..., telling one, basically that "Acrobat doesnt even like this happening at all, and it could be detrimental to ones computer files", blah-blah...(this freaks grandma out really bad)...& usually they end up not even trying to send it... and then I get calls that even you wouldn't believe...& If they DO nut up and push the Red "Submit Form" button, it will usually send the thing to us (and also back to them at the "required email address" they furnished on the form, thats what the folks at the "fillable forms place" do) so, if it's performing it's functions, why it is having to complain?. What are we doing wrong?....and how can I fix it?...Will re-compiling it or saving it as a newer version of "FormsCentral" correct any of these problems ?
Ok, so that should keep you busy for a minute and we can start out with those problems...but the next thing is, how can I take advantage of YOUR re-direct & hosting services?, And will it get rid of the error messages, and the slowness, and the iOS incompatibilities ? (amazingly, the last iOS Reader version worked almost OK.. but the newest version doesnt seem to work with my form on my iphone4) If it will enable any version of the iOS to send my form correctly and more transparently, then it might be worth the money...$14.95 a MONTH you say. hmmmmm...Better be good.
Another problem is, that I really don't need 5000 forms a month submitted. I think its like 70-100 or less....Got any plans for that? Maybe I'm just not BIG ENOUGH to use Adobe's services, however in this case, I really don't care whose I do use as long as the product works most correctly for my customers as well as us. Like I said, If I'm doing the best I can, I won't change anything, and still use the other third party, If Adobe has a better solution, then i'm all for that as well. In the meantime, Thanks for any help you can provide on this...
Michael Corman
VinylCouture.com
(706) 326-7911 -
I need help with this script please ASAP
So I need this to work properly, but when ran and the correct answer is chosen the app quits but when the wrong answer is chosen the app goes on to the next question. I need help with this ASAP, it is due tommorow. Thank you so much for the help if you can.
The script (Sorry if it's a bit long):
#------------Startup-------------
display dialog "Social Studies Exchange Trviva Game by Justin Parzik" buttons {"Take the Quiz", "Cyaaaa"} default button 1
set Lolz to (button returned of the result)
if Lolz is "Cyaaaa" then
killapp()
else if Lolz is "Take the Quiz" then
do shell script "say -v samantha Ok starting in 3…2…1…GO!"
#------------Question 1-----------
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 2--------
display dialog "Most children were taught
to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------------Question 3---------
display dialog "In the 1730s and 1740s, a religious movement called the_______swept through the colonies." buttons {"Glorius Revolution", "Great Awakening", "The Enlightenment"}
set A3 to (button returned of the result)
if A3 is "Great Awakening" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-----------Question 4--------
display dialog "_______ was
a famous American Enlightenment figure." buttons {"Ben Franklin", "George Washington", "Jesus"}
set A4 to (button returned of the result)
if A4 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 5-------
display dialog "______ ownership gave colonists political rights as well as prosperity." buttons {"Land", "Dog", "Slave"}
set A5 to (button returned of the result)
if A5 is "Land" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 6--------
display dialog "The first step toward guaranteeing these rights came in 1215. That
year, a group of English noblemen forced King John to accept the…" buttons {"Declaration of Independence", "Magna Carta", "Constitution"}
set A6 to (button returned of the result)
if A6 is "Magna Carta" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 7--------
display dialog "England's cheif lawmaking body was" buttons {"the Senate", "Parliament", "King George"}
set A7 to (button returned of the result)
if A7 is "Parliament" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 8-----
display dialog "Pariliament decided to overthrow _______ for not respecting their rights" buttons {"King James II", "King George", "King Elizabeth"}
set A8 to (button returned of the result)
if A8 is "King James II" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 9------
display dialog "Parliament named ___ and ___ as England's new monarchs in something called ____." buttons {"William/Mary/Glorius Revolution", "Adam/Eve/Great Awakening", "Johhny/Mr.Laphalm/Burning of the hand ceremony"}
set A9 to (button returned of the result)
if A9 is "William/Mary/Glorius Revolution" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 10-----
display dialog "After accepting the throne William and Mary agreed in 1689 to uphold the English Bill of _____." buttons {"Money", "Colonies", "Rights"}
set A10 to (button returned of the result)
if A10 is "Rights" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 11------
display dialog "By the late 1600s French explorers had claimed the ___ River Valey" buttons {"Mississippi", "Ohio", "Hudson"}
set A11 to (button returned of the result)
if A11 is "Ohio" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------Question 12---------
display dialog "______ was sent to ask the French to leave 'English Land'." buttons {"Johhny Tremain", "George Washington", "Paul Revere"}
set A12 to (button returned of the result)
if A12 is "George Washington" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 13-------
display dialog "_____ proposed the Albany Plan of Union" buttons {"George Washingon", "Ben Franklin", "John Hancock"}
set A13 to (button returned of the result)
if A13 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 14------
display dialog "The __________ declared that England owned all of North America east of the Mississippi" buttons {"Proclomation of England", "Treaty of Paris", "Pontiac Treaty"}
set A14 to (button returned of the result)
if A14 is "" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-------Question 15-------
display dialog "Braddock was sent to New England so he could ______" buttons {"Command an attack against French", "Scalp the French", "Kill the colonists"}
set A15 to (button returned of the result)
if A15 is "Command an attack against French" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------TheLolQuestion-----
display dialog "____ is the name of the teacher who runs this class." buttons {"Mr.White", "Mr.John", "Paul Revere"} default button 1
set LOOL to (button returned of the result)
if LOOL is "Mr.White" then
do shell script "say -v samantha Congratulations…you…have…common…sense"
else
do shell script "say -v alex Do…you…have…eyes?"
#------END------
display dialog "I hope you enjoyed the quiz!" buttons {"I did!", "It was horrible"}
set endmenu to (button returned of the result)
if endmenu is "I did!" then
do shell script "say -v samantha Your awesome"
else
do shell script "say -v alex Go outside and run a lap"
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end ifUse code such as:
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
#----------Question 2--------
display dialog "Most children were taught to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
(90444) -
I need help with a VB Application
I need help with building an application and I am on a tight deadline. Below I have included the specifics for what I need the application to do as well as the code that I have completed so far. I am having trouble getting the data input into
the text fields to save to a .txt file. Also, I need validation to ensure that the values entered into the text fields coincide with the field type. I am new to VB so please be gentle. Any help would be appreciated. Thanx
•I need to use the OpenFileDialog and SaveFileDialog in my application.
•Also, I need to use a structure.
1. The application needs to prompt the user to enter the file name on Form_Load.
2. Also, the app needs to use the AppendText method to write the Employee Data to the text file. My project should allow me to write multiple Employee Data to the same text file. The data should be written to the text file in the following format (comma
delimited)
FirstName, MiddleName, LastName, EmployeeNumber, Department, Telephone, Extension, Email
3. The Department dropdown menu DropDownStyle property should be set so that the user cannot enter inputs that are not in the menu.
Public Class Form1
Dim filename As String
Dim oFile As System.IO.File
Dim oWrite As System.IO.StreamWriter
Dim openFileDialog1 As New OpenFileDialog()
Dim fileLocation As String
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
openFileDialog1.InitialDirectory = "c:\"
openFileDialog1.Filter = "Text files (*.txt)|*.txt|All files (*.*)|*.*"
openFileDialog1.FilterIndex = 1
openFileDialog1.RestoreDirectory = True
If openFileDialog1.ShowDialog() = System.Windows.Forms.DialogResult.OK Then
fileLocation = openFileDialog1.FileName
End If
'filename = InputBox("Enter output file name")
'oWrite = oFile.CreateText(filename)
cobDepartment.Items.Add("Accounting")
cobDepartment.Items.Add("Administration")
cobDepartment.Items.Add("Marketing")
cobDepartment.Items.Add("MIS")
cobDepartment.Items.Add("Sales")
End Sub
Private Sub btnSave_Click(ByValsender As System.Object, ByVal e As System.EventArgs) Handles btnSave.Click
'oWrite.WriteLine("Write e file")
oWrite.WriteLine("{0,10}{1,10}{2,10}{3,10}{4,10}{5,10}{6,10}{7,10}", txtFirstname.Text, txtMiddlename.Text, txtLastname.Text, txtEmployee.Text, cobDepartment.SelectedText, txtTelephone.Text, txtExtension.Text, txtEmail.Text)
oWrite.WriteLine()
End Sub
Private Sub btnExit_Click(ByValsender As System.Object, ByVal e As System.EventArgs) Handles btnExit.Click
oWrite.Close()
End
End Sub
Private Sub btnClear_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnClear.Click
txtFirstname.Text = ""
txtMiddlename.Text = ""
txtLastname.Text = ""
txtEmployee.Text = ""
txtTelephone.Text = ""
txtExtension.Text = ""
txtEmail.Text = ""
cobDepartment.SelectedText = ""
End Sub
End ClassHi Mikey81,
Your issue is about VB programming, so Visual Basic forum is a better forum for your case. I moved this thread there,
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Need help in understanding the error ORA-01843: not a valid month - ECX_ACT
Hello All,
We need help in understanding the Transaction Monitor -> Processing Message (error "ORA-01843: not a valid month - ECX_ACTIONS.GET_CONVERTED_DATE").
And how to enable the log for Transaction Monitor -> Processing Logfile.
Actually we are trying to import the Purchase Order XML (OAG) into eBusiness Suite via BPEL Process Manager using the Oracle Applications Adapter. The process is working fine with expected payload until it reaches the XML Gateway Transaction Monitor, where we are getting this error.
thanks
muthu.Hello All,
We need help in understanding the Transaction Monitor -> Processing Message (error "ORA-01843: not a valid month - ECX_ACTIONS.GET_CONVERTED_DATE").
And how to enable the log for Transaction Monitor -> Processing Logfile.
Actually we are trying to import the Purchase Order XML (OAG) into eBusiness Suite via BPEL Process Manager using the Oracle Applications Adapter. The process is working fine with expected payload until it reaches the XML Gateway Transaction Monitor, where we are getting this error.
thanks
muthu. -
Need help with my addressbook program
hi,
i need help with my program here. this one should works as:
- saves user input into a txt file
- displays name of the saved person on the jlist whenever i run the program
- displays info about the person when clicked via textboxes given by reading the txt file where the user inputs are
- should scroll when the list exceeds the listbox
import java.awt.event.*;
import java.awt.*;
import javax.swing.*;
import javax.swing.JList;
import java.awt.event.ActionListener;
import java.io.*;
import javax.swing.event.*;
import java.io.FilterInputStream;
public class AddressList extends JPanel implements ActionListener
JTextField txt1 = new JTextField();
JTextField txt2 = new JTextField();
JTextField txt3 = new JTextField();
DefaultListModel mdl = new DefaultListModel();
JList list = new JList();
JScrollPane listScroller = new JScrollPane(list);
ListSelectionModel listSelectionModel;
File fob = new File("Address3.txt");
String name;
char[] chars;
public void ListDisplay()
try
RandomAccessFile rand = new RandomAccessFile(fob,"rw");
BufferedReader br = new BufferedReader(new FileReader("Address3.txt"));
if(fob.exists())
while((name = rand.readLine()) != null)
chars = name.toCharArray();
if(chars[0] == '*')
mdl.addElement(name);
list.setModel(mdl);
if(chars[0] == '#')
continue;
else
System.out.println("No such file..");
catch(IOException a)
System.out.println(a.getMessage());
public AddressList()
this.setLayout(null);
listSelectionModel = list.getSelectionModel();
listSelectionModel.addListSelectionListener(new ListInfo());
list.setBounds(10,40,330,270);
listScroller.setBounds(320,40,20,100);
add(list);
add(listScroller);
JLabel lbl4 = new JLabel("Name: ");
lbl4.setBounds(400,10,80,30);
add(lbl4);
JLabel lbl5 = new JLabel("Cellphone #: ");
lbl5.setBounds(400,50,80,30);
add(lbl5);
JLabel lbl6 = new JLabel("Address: ");
lbl6.setBounds(400,90,80,30);
add(lbl6);
JLabel lbl7 = new JLabel("List ");
lbl7.setBounds(10,10,100,30);
add(lbl7);
txt1.setBounds(480,10,200,30);
add(txt1);
txt2.setBounds(480,50,200,30);
add(txt2);
txt3.setBounds(480,90,200,30);
add(txt3);
JButton btn1 = new JButton("Add");
btn1.setBounds(480,130,100,30);
btn1.addActionListener(this);
btn1.setActionCommand("Add");
add(btn1);
JButton btn2 = new JButton("Save");
btn2.setBounds(480,170,100,30);
btn2.addActionListener(this);
btn2.setActionCommand("Save");
add(btn2);
JButton btn3 = new JButton("Cancel");
btn3.setBounds(480,210,100,30);
btn3.addActionListener(this);
btn3.setActionCommand("Cancel");
add(btn3);
JButton btn4 = new JButton("Close");
btn4.setBounds(480,250,100,30);
btn4.addActionListener(this);
btn4.setActionCommand("Close");
add(btn4);
public static void main(String[]args)
JFrame frm = new JFrame("Address List");
AddressList panel = new AddressList();
frm.getContentPane().add(panel,"Center");
frm.setSize(700,350);
frm.setVisible(true);
panel.ListDisplay();
public void actionPerformed(ActionEvent e)
String cmd;
cmd = e.getActionCommand();
if(cmd.equals("Add"))
txt1.setText("");
txt2.setText("");
txt3.setText("");
else if(cmd.equals("Save"))
mdl.addElement(txt1.getText());
list.setModel(mdl);
try
RandomAccessFile rand = new RandomAccessFile(fob,"rw");
BufferedReader br = new BufferedReader(new InputStreamReader(System.in));
LineNumberReader line = new LineNumberReader(br);
if(fob.exists())
rand.seek(fob.length());
rand.writeBytes("* " + txt1.getText());
rand.writeBytes("\r\n" + "# " + txt2.getText());
rand.writeBytes("\r\n" + "# " + txt3.getText() + "\r\n");
else
System.out.println("No such file..");
txt1.setText("");
txt2.setText("");
txt3.setText("");
catch(IOException a)
System.out.println(a.getMessage());
else if(cmd.equals("Cancel"))
txt1.setText("");
txt2.setText("");
txt3.setText("");
else if(cmd.equals("Close"))
System.exit(0);
class ListInfo implements ListSelectionListener
public void valueChanged(ListSelectionEvent e)
ListSelectionModel lsm = (ListSelectionModel)e.getSource();
int minIndex = lsm.getMinSelectionIndex();
int maxIndex = lsm.getMaxSelectionIndex();
try //*this one should display the info of the person whenever i click the person's name at the list box via textbox.. but i cant seem to get it right since it always display the info of the first person inputed.. i tried to get the program to display them whenever it reads lines with * on them....
File fob = new File("Address3.txt");
RandomAccessFile rand = new RandomAccessFile(fob,"rw");
BufferedReader br = new BufferedReader(new FileReader("Address3.txt"));
LineNumberReader line = new LineNumberReader(br);
if(fob.exists())
for(int i = minIndex; i<=maxIndex; i++)
if(lsm.isSelectedIndex(i))
while((name = rand.readLine()) != null)
chars = name.toCharArray();
if(chars[0] == '#')
continue;
if(chars[0] == '*')
txt1.setText(rand.readLine());
txt2.setText(rand.readLine());
txt3.setText(rand.readLine());
else
System.out.println("No such file..");
catch(IOException a)
System.out.println(a.getMessage());
}the only problem now is about how it should display the right info about the person whenever i click its name on the list.. something about file reading or something, i just cant figure it out.
and also about how to make it scroll once it exceeds the list.. i cant make it work, maybe something about wrong declaration..
thanks in advance..
Edited by: syder on Mar 14, 2008 2:26 AMLike said before, do one thing at a time. At startup, something like:
//put all the content in a list
ArrayList<String> lines = new ArrayList<String>();
while(String line=rand.readLine()!=null) {
lines.add(line);
}If you follow the good advice to create a class to encapsulate the entries, you could populate a list of such entries like this:
static final int ENTRY_SIZE = 3;//you have 3 fields now, better to have a constant if that changes
ArrayList<Entry> entries = new ArrayList<Entry>();
for(int i=0; i<lines.size(); i+=ENTRY_SIZE) {
Entry entry = new Entry(lines.get(i), lines.get(i+1), lines.get(i+2);
entries.add(newEntry);
}You could also do both of the above in one run, but I think you will understand better what's happening if you do one thing at a time.
If you don't want to put the entries in an encapsulating class, you can still access this without looping:
int listStartIdx = <desired_entry_index>*ENTRY_SIZE;
String att1 = lines.get(listStartIdx).substring(1);
String att2 = lines.get(listStartIdx+1).substring(1);
String att3 = lines.get(listStartIdx+2).substring(1); -
Need help with a Asus 27" monitor with webcam problem.
Need help with a Asus 27" monitor I bought. Model VK278Q. The issue is that the webcam will not work properly. Various applications can see the webcam, but I just get a black box. From what I have read, the issue seems to be that there are no official drivers for the webcam.
I thought someone in this community might be able to offer some help before I return the monitor. I read somewhere that it may be possible to tweat the OS so that the iSight software will work for the monitor webcam.
ThxNAVARRO360 wrote: ... there is no simple fix? ...
Eureka! You now understand the situation.
Even the old standard for Mac OS X drivers for non-compatible cams, macam, says that it has no driver for ASUS (20") monitor camera.
The macam status shows:
not working (no documentation)
With no working driver for the 20" ASUS, it is not surprising that there is none for the 27" either. There may be good reason that ASUS won't (or can't) offer either the technical documentation or a Mac driver for their monitor's inbuilt webcam. However, they apparently do not publish that information.
If ASUS Technical Support cannot provide the driver you need for OS X, the ASUS will continue to be a ridonculous (sic) monitor whose webcam will not work with your OS X Mac. The only other simple fix I can think of is to use the ASUS with a different PC that is compatible with this monitor and its inbuilt webcam. What you do is certainly your choice.
Message was edited by: EZ Jim
Mac OSX 10.7.3 -
Need help with Outlook 2013 connecting to Exchange server(2010)
Hi
I need help with Outlook 2013 and with my exchange server(2010) email account
After setting up account initially emails come in and than after an hour or two stop. My OWA is working fine with no issues. I have even created a forward rule in OWA to my GMAIL account whch works fine
However Outlook 2013 is not syncing messages, have difficulty in sending emails sometimes as it takes too long. In fact the connection also is intermittent. Even if the task bar shows connected to exchange, it seems that is not the case since new emails
and any emails I compose dont work. I have trouble shot the issue with my ISP and email service provide, but they havent resolved the issue I have also done a TraceRoute and that shows no drops or problems to he exchange server.
Can someone please help me resolve this matter so I can continue to use Outlook 2013( running Windows 8.1) in both my computers which have the identical problem
Look forward to a solution soon
ThanksHi Angela
Thanks for your message
To answer your questions, please note the following
a) My account is set up in Cache Mode( not online mode)
b) I am the only other user on the account
c) When the connection to the exchange server is broken, I see upon clicking connection tab that there is no information in the box, and when I press reconnect it starts showing "connecting"
d) When the connection to the server is there, it shows connection as "established"
e) Sorry I dont understand th meaning of CAS array in your environment? Can you pls explain
Since yday I have been using Outlook 2010 on desktop and Outlook 2013 on my laptop using Exchange 2013 account. So far all emails are syncing, and I can send emails from both computers. However, I am concerned that the connection can break-off anytime,
as it has done that in the past on both outlook versions. The max time it has worked without any problem is 48 hrs and than after that the same issue of not connection, not syncing and unable to send emails happens
My ISP has checked and there is no network connectivity issues. My email service provider has trouble shot the issue many times, but to no positive results. I have also changed the profile a few times, but the intermittent connectivity problem hasn't
been resolved.
Can you identify the possible causes and more importantly a working permanent solution please
Thanks
Mahesh -
i need help with my WRT54GS V5.1 wireless router. it cannot connect to the internet and i don't know why. at the moment i have to use an ethernet cable coming from a virgin media modem. information that might be usefull. one of the antennas on the router is broke i am using windows vista on a toshiba laptop. the model is WRT54GS V5.1 thanks for people who help note: i am only 13 so somethings you say i might not understand.
Access Setup page of router .....
Click wireeless tab .... have a note of the wireless settings on that page .... Please click on the tab "Application and gaming" and click on sub
tab "Port range forwarding"
1) On the first line in Application box type in "Xbox", in start box
type in 88, in end box type in 88, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
2) On the second line in Application box type in "Xbox", in start box
type in 3074, in end box type in 3074, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
3) Now save the settings
4) Once you return to the setup page, click on the tab "Administration"
and disable the UPNP and save the settings.
5) Now assign the given ip address on your xbox
ip address :- 192.168.1.20
subnet mask :- 255.255.255.0
default gateway :- 192.168.1.1
Please assign the dns address on the xbox
primary dns :- 4.2.2.2
secondary dns :- 192.168.1.1
6) Please try to test your xbox live. -
Need help with Patch Tool in CS5
I am having a problem using the patch tool in Photoshop CS5. I click on the Patch Tool and select the Source option from the upper tool bar. Then I circle a gray area in the background of my photo and, holding down the left mouse button, I drag the selection to a black area in the background and release the mouse button. Instead of turning the selected area black it just makes the area slightly darker than it was originally. I just don’t understand why I can’t use the patch tool and any help would be appreciated.
Thank you very much for these suggestions. Robert
Noel Carboni <[email protected]> wrote:
Noel Carboni http://forums.adobe.com/people/Noel+Carboni created the discussion
"Re: Need help with Patch Tool in CS5"
To view the discussion, visit: http://forums.adobe.com/message/4308270#4308270 -
Need help with a Spreadsheet style app
I was just wanting some help in working with developing an app for my iphone... i had previous experience in microsoft visual basic but i don't quite understand this code....
I am in flight school and trying to develop an app that reflects the weight an balance forms we do... I am stuck on how to do basic multiplication and division with xcode, i have viewed several videos and tutorials but they each do things differently and i can't seem to bring it together into this app.
So in the picture below.... what i need help with is how to do the following
from
aircraft weight * arm = Moment outbound
front seats * arm = Moment outbound
to fuel @ landing
"0" fuel weight = aircraft weight + front seats + rear seats+ Baggage 1 + baggage 2
If anyone has any ideas or can lend me some tip or places that deal with stuff like this that would be greatA character class [...] robs some otherwise special codes from their magic. The +, for instance, is interpreted as a plus, not as "repeat ad nauseum" anymore.
So your try [\d+] will simply match either a single digit or a single plus. The solution is to move the + outside of the character class
[\d]+
.. and in that case there is no reason anymore to create a class for just digits, as you got it already.
The period *needs* to be escaped, because otherwise it will match *any* character.
Try this for a change:
\d+\.\d+
Maybe you are looking for
-
I'm trying to download iTunes on Windows Vista, get system adminstrator won't allow this kind of installation error. What should I do? It's 64-bit.
-
Hi All, The SOAP is working fine on PROD all 3 nodes, but when we test through website link, it raised the following error. I am new to this one, I donnow How to degbug also.. Pls advise. Feb 20, 2009 12:18:40 PM com.sun.xml.messaging.saaj.client.p2p
-
BEx Designer: How to count if an InfoObject(field=ProblemNr) is empty
Hi, in the ROWS i have an InfoObject (let's say ProblemNumber) and in the COLUMNS another InfoObject (Date). The IO in the Rows is not a primary key and it's not always filled in. The OrderNr might be a primary key. I want to find out how many of the
-
Hello, My company is extremely restrictive in terms of tools permitted for use in the production environment and have recently requested that support staff discontinue using SQL Developer. Are there any recorded incidents of data loss, corruption or
-
How to change sync settings in iTunes
How do you change sync settings in iTunes? I want to be able to connect my iPhone to iTunes and not have my iPhone automatically sync information to/from my computer and iPhone.