Need help with userid/password bypass on iplanet

Hi,
Here is my scenario. Currently we have iplanet directory server 4.11
on Solaris 7, it is working and we have up to 300 people already in the
database. We have Iplanet webserver on another Sun server connected to
the ldap server and it connects well and passes on to the cgi directory
where an erp software takes over. We are attempting to have a one login
system, and unfortunately we are limited due many issues; but what we
would like to is take a person id and password, go to the web server but
bypass(so the user doesn't have to login twice) the usrename/password
dialog (is this possible?); and still authenticate to the ldap server
via this web server and then let the erp software take over. I don't
know if I am correctly stating is or not, but I hope some has answer.
Thanks
Yatrik
[email protected]

Yatrik,
Check out the iplanet software called Directory Server Access Management Edition. You can get the info from their website. The have documentation whcih explains how to do this.

Similar Messages

HELP! I NEED HELP WITH MY PASSWORD

I RECENTLY PURCHASED MY IBOOK FROM AN INDUVIDUAL AND I CANT SET UP AN EMAIL ADDRESS OR ANYTHING ELSE BECAUSE IT SAYS THAT MY PASSWORD IN INCORRECT.THE USERNAME THAT POPS UP IS MY NAME.I NEED TO FIND OUT HOW TO TAKE CARE OF THIS.ANY HELP? THANKS!

First off, all caps is considered shouting. Bad idea.
As for your actual question -- a bit more information is required. Do you need to change the password for your user account? Your user account is what you login to when you turn on your computer. It might be setup so you don't have to enter your username and password when you boot up. It is set this way if you can turn it on, and when it's done starting, you see a desktop and dock and can use your programs. On the other hand, you might have to enter your username (either by typing or clicking on your icon) and then your password. After doing that you will be at the desktop.
If you can't get to the desktop be, it means you aren't typing the password correctly. Passwords are case sensitive -- perhaps you just need to turn caps-lock off -- e.g., "PASSWORD" is not the same as "password" and if your password is set to something like the latter, typing the former will always fail. If you don't know the password, you can reset it by booting from the system install discs (put in system disc, hold down "c" while turning on the computer, ignore the open popup regarding installation, from the menu, choose the option for resetting the password, choose the user you wish to reset, and then enter a new password).
On the other hand, if you get to your desktop and can use programs, the above is not your problem. Instead, you are having a problem loging into your mail account because you don't know your password. In that case, your only option is to contact the mail service provider and ask for your password. That issue has nothing to do with your operating system.

HT204088 I need help with my password I forgot the alternative email and securtity question answers

I have an itunes account and my children keep charging my credit card . I need to change my password but......
I don't remember the alternative email address used and don't remember the security question answers.

First off, all caps is considered shouting. Bad idea.
As for your actual question -- a bit more information is required. Do you need to change the password for your user account? Your user account is what you login to when you turn on your computer. It might be setup so you don't have to enter your username and password when you boot up. It is set this way if you can turn it on, and when it's done starting, you see a desktop and dock and can use your programs. On the other hand, you might have to enter your username (either by typing or clicking on your icon) and then your password. After doing that you will be at the desktop.
If you can't get to the desktop be, it means you aren't typing the password correctly. Passwords are case sensitive -- perhaps you just need to turn caps-lock off -- e.g., "PASSWORD" is not the same as "password" and if your password is set to something like the latter, typing the former will always fail. If you don't know the password, you can reset it by booting from the system install discs (put in system disc, hold down "c" while turning on the computer, ignore the open popup regarding installation, from the menu, choose the option for resetting the password, choose the user you wish to reset, and then enter a new password).
On the other hand, if you get to your desktop and can use programs, the above is not your problem. Instead, you are having a problem loging into your mail account because you don't know your password. In that case, your only option is to contact the mail service provider and ask for your password. That issue has nothing to do with your operating system.

Please, i need help with my password.

I seemed to have forgotten my password. I need it to install an app, but I dont know where to recover it. Can someone please help me with this? I am brand new to macs, so please could you make as simple as possible?

I'm glad it all worked out for you OK. Now you know two things.
First, the Help files in all the Apple apps are usually very helpful in understanding how everything works.
Second, you know to guard your Install DVDs (or Retail Mac OS X disks) well because anyone Mac knowledgeable can access your Mac with those disks.

Need help with administrator password for first use??

Hi, I'm not sure if this is a dummy question. I just installed BI EE, then I was trying to open a sample Repository file, it asked me for password for Administrator account. I entered SADMIN as I found from the HELP (attached below), it didn't work; then I left it blank, it didn't work, then I tried any password I used during the installation, none of them worked.
Hopefully I can get some insight here.
Thank and have a good day.
Crystal
====================
About the Oracle BI Administrator Account
The Oracle BI Administrator account (user ID of Administrator) is a default user account in every Oracle BI repository. This is a permanent account. It cannot be deleted or modified other than to change the password and logging level. It is designed to perform all administrative tasks in a repository, such as importing physical schemas, creating business models, and creating users and groups.
NOTE: The Oracle BI Administrator account is not the same as the Windows NT and Windows 2000 Administrator account. The administrative privileges granted to this account function only within the Oracle BI Server environment.
When you create a new repository, the Oracle BI Administrator account is created automatically and has no password assigned to it. You should assign a password for the Oracle BI Administrator account as soon as you create the repository. The Oracle BI Administrator account created during the installation of the Oracle BI repository, that is, the repository shipped with Oracle BI, has the default password SADMIN.
The Oracle BI Administrator account belongs to the Administrators group by default and cannot be deleted from it. The person logged on using the Oracle BI Administrator user ID or any member of the Oracle BI Administrators group has permissions to change anything in the repository. Any query issued from the Oracle BI Administrator account has complete access to the data; no restrictions apply to any objects.

Goran O wrote:
Try Administrator/Administrator, it works for sh.rpd and samplesales.rpd.
Regards
Goran
http://108obiee.blogspot.com
Thank you too!!

HELP HELP HELP with adminstrator password for pavilion dv7 beats audio

Hi. I need help with adminstrator password for pavilion dv7 with window 7. I don't remember with is the adminstrator password for pavilion dv7 beats audio. Is there anyway you can help me with this? once i enter 3 times is gives me this system disabled code: 52464663.

Hi
Try this Key : 43542265 That should fix your issue
Hope this helps.
***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
-VJ
Although I am an HP Employee, I am speaking for myself and not for HP.

I need help with resetting my ichat. When i try to login now it wont let me... it says "AOL Instant Messenger password" and then "iChat can't log in to ... because your login ID or password is incorrect. How do I reset this if I cant log in?

I need help with resetting my ichat. When i try to login now it wont let me... it says "AOL Instant Messenger password" and then "iChat can't log in to ... because your login ID or password is incorrect. How do I reset this if I cant log in? When I try to press online the same thing pops up and I have no way of logging in or asking for help.

Hi,
iChat (it would help to know which version) can accept Apple IDs as valid AIM Screen Names.
However if you have iChat 5 or earlier you cannot use ones ending in @me.com or @icloud.com issued by iCloud. (they can be used in iChat 6 or Messages as these versions make a double login to AIM and Apple to allow the use of the password).
In addition if you are using an Apple ID for an AIM Screen Name the password still needs to keep to the 16 character limit that AIM has.
AN @mac.com name can be used on any version of iChat (Until the 30th June 2014)
As it does not need a double check with Apple you can use it to log in to the AIM Web pages
Login here with an AIM Name registered at AIM or and @mac.com name and see if you get any suspended account messages.
Sometimes account can be suspended. Usually because something has triggered the "Unusual Activity" item.
About a year ago many @mac.com users that travelled out of their own country found themselves suspended when they got home.
If the Name checks out of if an Apple ID the password in known to be 16 characters or Less then do this:-
In Lion upwards open a Finder Window and use the Go Menu whilst holding down the ALT key.
Select the Library that appears in the menu list.
Navigate to Preferences.
(If you have version earlier than Lion the just navigate to ~/Library/Preferences (that's the Library in you Home - Little House icon - folder)
Fnd com.apple.ichat.aim.plist (even if you are using Messages)
Drag the file to the Trash and Restart the app.
7:39 pm Thursday; May 29, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook.......

need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook? removal of cmos, resetting laptop, using cccleaner, windows password recovery and hiren's was noneffective, any help is appreciated. thanks

Hi,
As your notebook is a business class machine, security is more stringent - the password is stored in non-volatile memory and there are no 'backdoor' passwords. Your best option would be to contact HP regarding this.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Need help with boot up password

Hi I need help with my IBM G41 think pad I when to sleep one night and I put some papers on the keys then close the lid with the papers in between on top of the keys now I get need a password when I started my PC can some some help me with this . Or is there any one whom had this some problem . I see a lock on the screen .

Sorry if this seems like a stupid question, but why don't you have the password already? did the computer just randomly lock you out of it? If that is the case, that would be really strange. If there is no bios password on the computer, you should be able to reset the password in the bios.
http://www.google.com/search?q=lenovo+boot+password+reset&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:defficial&client=firefox-a

Please help! I am trying to change my Apple Id that used to be my mother to Mine- Every time i have it changed and i go and try and do an update it continues to ask for her old password. I really need help with this!

Please help! I am trying to change my Apple Id that used to be my mother to Mine- Every time i have it changed and i go and try and do an update it continues to ask for her old password. I really need help with this!

Phil0124 wrote:
Apps downloaded with an Apple ID are forever tied to that Apple ID and will always require it to update.
The only way around this is to delete the apps that require the other Apple ID and download them again with yours.
Or simply log out of iTunes & App stores then log in with updated AppleID.

HT5312 Guys, I have forgotten my security question answers, and the rescue email I placed in with my apple id has been closed down as well (it was a university id, when I graduated, the email service expired). I need help changing my password.

Guys, I have forgotten my security question answers, and the rescue email I placed in with my apple id has been closed down as well (it was a university id, when I graduated, the email service expired). I need help changing my password.

The Three Best Alternatives for Security Questions and Rescue Mail
    1. Use Apple's Express Lane.
          Go to https://expresslane.apple.com ; click 'See all products and services' at the
          bottom of the page. In the next page click 'More Products and Services, then
          'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
          ID security questions' and click 'Continue'.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

Re: I need help with wi-fi password

i need help with wi-fi pass word

I am trying to connect my iPhone with my wireless router and looks to be rejecting the password I have saved for my password for my rounter. I tried emailing for it and the support page for this is not recognizing what I think would have been the email I had at the time it was set up--we are currently not using that email address--and tried by current internet email and it's rejecting that too. I registered as a new user to get in to look for help on this. My previous email probably would have been [email protected]
I have my serial number and such to my router (model: WRT54GSv1.1) if needed. Please advise.

Need help with a currently "in-use" form we want to switch to Adobes hosting service

Hi, I am in desperate need of help with some issues concerning several forms which we currently use a paid third party (not Adobe) to host and "re-distribute through email"...Somehow I got charged $14.95 for YOUR service, (signed up for a trial, but never used it)..and now I am paying for a year of use of the similar service which Adobe is in control of. I might want to port my form distribution through Adobe in the hopes of reducing the errors, problems and hassles my customers are experiencing when some of them push our "submit button". (and I guess I am familiar with these somewhat from reading what IS available in here, and I also know that, Adobe is working to alleviate some of these " submit" issues, so let's don't start by going backwards, here) I need solutions now for my issues or I can leave it as is, If Adobe's solution will be no better for my end users...
We used FormsCentral to code these forms and it works for the most part (if the end-user can co-operate, and thats iffy, sometimes), but I need help with how to make it go through your servers (and not the third party folks we use now), Not being cruel or racist here, but your over the phone "support techs" are about horrible & I cannot understand them or work with any of them, so I would definitely need someone who speaks English and can understand the nuances of programming these forms, to please contact me back. (Sorry, but both those attributes will be required to be able to help me, so, no "newbie-interns" or first week trainees are gonna cut it).... If you have anyone who fits the bill on those items and would be willing to help us, please contact me back at your earliest convenience. If we have to communicate here, I will do that & I can submit whatever we need to & to whoever we need to.
I need to get this right and working for the majority of my users and on any platform and OS.
You may certainly call me to talk about this, and I have given my number numerous times to your (expletive deleted) time wasting - recording message thingy. So, If it's not available look it up under [email protected]
(and you will probably get right to me, unlike my and I'm sure most other folks', "Adobe phone-in experiences")
Thank You,
Michael Corman
VinylCouture
Phenix City, Alabama 36869

Well, thanks for writing back...just so you know...I started using Adobe products in 1987, ...yeah...back then...like Illustrator 1 & 9" B&W Macs ...John Warnock's Helvetica's....stuff like that...8.5 x 11 LaserWriters...all that good stuff...I still have some of it working on a mac...much of it was stuff I bought. some stuff I did not...I'm not a big fan of this "cloud" thing Adobe has foisted upon the creatives of the world...which I'm sure you can tell...but the functionality and usefulness of your software can not be disputed, so feel free to do whatever we will continue to pay for, ...I am very impressed with CC PS on the 64 bit PC and perhaps I will end up paying you the stipend that you demand for the other services.
So I guess that brings us to our problem.. a few years back and at the height of the recession and near bankruptcy myself, I was damn lucky and hit on something and began a small arts and crafts supply service to sell my products online to a very "niche market" ...I had a unique product and still sell that product (plus others) online...My website is www.vinylcouture.com...Strange? Yes...but there is a market it seems, for everything now, and this is the market I service...Catagorically, these are 99%+ women that use these "adhesive, sticky backed vinyl products" to make different "craft items" that are just way too various and numerous to go into... generally older women, women who are computer illiterate for the most part...and all this is irrelevant to my problem, but I want you to have every bit of background on this and especially the demographic we are dealing with, so we can get right to the meat of the problem.
OK...So about two years ago, I decided to offer a "plain sheet" product of a plain colored "stick back" vinyl... it is available in multiple quantities of packs ( like 5 pieces, 10 pieces, 15 pieces, in a packi & so on)...and if you are still on my site.. go to any "GO RIGHT TO OUR ORDER PAGE" button, scroll down a little...and then to the "PLAIN VINYL" section...you will see the Weebly website order process.) You can back out from here, I think,..but, anyway this product is available in 63 colors + or - a few. So then the problem is, how do they select their individual colors within that (whatever) pack?... .
So my initial idea was to enable a "selection form" for these "colors" that would be transmitted to me via email as 'part" of the "order process".. We tried getting our customers to submit a " a list" ( something my competitiors still do, lol, poor bastards)......but that..is just unbelievable..I can't even begin to tell you what a freakin' nightmare that was...these people cannot even count to 10, much less any higher... figuring out what colors to list and send me... well, lets just say, it wasn't working......I had to figure out a better way...Something had to be done.
So after thinking this all out, and yeah...due to my total ignorance, i figured that we could make a form with Live Cycle Designer (Now Forms Central)...(back then something that was bundled with Adobe Acrobat Pro), I believe, and thats what this thing was authored in... and it would be all good...LOL!
Well not so simple...as you well know, Adobe Acrobat would NOT LET YOU EMAIL anything from itself.....it just wouldn't work (and I know why, and all that hooey), but not being one to take NO for answer,.I started looking for a way to make my little gizmo work.. So I found this company that said they can "hijack" (re-direct actually) the request to email, bypass the wah-wah, and re-transmit it to the proper parties.....for less than $100 a year, I think...its called http://pdf-fillableforms.com/.
A nice gentleman named Joseph Silva helped us program the thing to go to his servers and back out. Please dont hassle them...I need them...for now..it basically does work...try it...you should get back a copy of the form that you filled out...good luck however, if you're on MAC OSX or similar...
I have included a copy of both of our forms (and feel free to fill it out and play with it)...just put test somewhere on it...(and you must include YOUR email or it will balk)..they are supposed to be mostly identical, except one seems to be twice as large....generating a 1.7 meg file upon submission, while the other one only generates a 600K file or so...thats another issue for another day or maybe you can advise on that also...
OK so far so good......In our shop, once Grandma buys a 10 pack (or whatever), Only then she gets to the link on her receipt page ro the relevant "selection form" ,(this prevents "Filling and Sending" with "no order" and "no payment", another early problem we had)... which they can click on and it will usually download and open up on their device if all goes well...Then our little form is supposed to be fillable and is supposed to ADD UP all the quantities, so grandma knows how many she is buying and so forth right on the fly, and even while she changes her mind..., and IT'S LARGE so grandma can see it, and then it TOTALS it all up for them, ( cause remember, they can NOT add).., except there is a programming bug (mouse-click should be a mouse-up probably or something..) which makes you click in the blank spaces to get to a correct TOTAL...about 70-80% of our customers can enable all these features and usually the process completes without problems for them especially on PC's running Windows OS and Acrobat Reader X or XI...at least for most... Unfortunately it is still not the "seamless process" I would like or had envisioned for the other folks out there that do have trouble using our form.... Many folks report to us the following issues that we know of. First of all it takes too much time to load up...We know its HUGE...is there anyway that you can see, to streamline this thing? I would love for it to be more compact...this really helps on the phones and pads as I'm sure you well know.
Some just tell us,"it WON'T work"....I believe this is because they are totally out of it and dont even have Adobe Reader on their machine, & don't know how to get it ( yes, we provide the links).....or it's some ancient version....no one can stop this one...
It almost always generates some kind ( at least one time) of "error message" which we do warn them about..., telling one, basically that "Acrobat doesnt even like this happening at all, and it could be detrimental to ones computer files", blah-blah...(this freaks grandma out really bad)...& usually they end up not even trying to send it... and then I get calls that even you wouldn't believe...& If they DO nut up and push the Red "Submit Form" button, it will usually send the thing to us (and also back to them at the "required email address" they furnished on the form, thats what the folks at the "fillable forms place" do) so, if it's performing it's functions, why it is having to complain?. What are we doing wrong?....and how can I fix it?...Will re-compiling it or saving it as a newer version of "FormsCentral" correct any of these problems ?
Ok, so that should keep you busy for a minute and we can start out with those problems...but the next thing is, how can I take advantage of YOUR re-direct & hosting services?, And will it get rid of the error messages, and the slowness, and the iOS incompatibilities ? (amazingly, the last iOS Reader version worked almost OK.. but the newest version doesnt seem to work with my form on my iphone4) If it will enable any version of the iOS to send my form correctly and more transparently, then it might be worth the money...$14.95 a MONTH you say. hmmmmm...Better be good.
Another problem is, that I really don't need 5000 forms a month submitted. I think its like 70-100 or less....Got any plans for that? Maybe I'm just not BIG ENOUGH to use Adobe's services, however in this case, I really don't care whose I do use as long as the product works most correctly for my customers as well as us. Like I said, If I'm doing the best I can, I won't change anything, and still use the other third party, If Adobe has a better solution, then i'm all for that as well. In the meantime, Thanks for any help you can provide on this...
Michael Corman
VinylCouture.com
(706) 326-7911

Hello, I need help with my macbook pro. It looks like I cannot install anything anymore. Everytime I try to install a new software, use the migration assistant or click the lock to make changes, it simply does not react.

Hello, I need help with my macbook pro.
It looks like I cannot install anything anymore. Everytime I try to install a new software, I simply get stuck during the installation type process. I put in my password, it does accept it, but it does not go any further.
I tried to reset the password, put no password, repair the permissions, the disk but nothing will do. I nearly got stuck with the log in screen but finally succeeded in disabling it.
So I thought I might try to create a new account but I cannot click the lock to make changes. It simply refuses to react.
I am now thinking about using the migration assistant to save all my settings, data and so fourth, but again I get stuck when I have to type in my password. It accepts it but nothing happens...
I guess it has something to do with the authorization process, but can't find anything on the internet about it... Can you help me out?
I am running Lion 10.7.3.
Regards,
Nicolas.
(I apologize if any grammatical/structural mistakes were to be found, english is not my mother-tongue. )

You probably won't like this suggestion, but I suggest you reinstall Lion.
First, backup your system. Next, reboot your system, press/hold the COMMAND-R keys to boot into the Recovery HD. Select 'Reinstall Mac OS X'. If you purchased Lion as an upgrade to Snow Leopard, the reinstall process will install Lion 10.7.3. If your system came preinstalled with Lion, you might still get Lion 10.7.2. Both installs are a total install of the OS. None of your apps or data will be impacted. Just the OS.

Need help with a terminal command

Ever since Lion, or maybe even earlier, I am fighting a losing battle against memory leaks on my MacBook Pro. Safari for example takes over time 2GB+ for just 2 or 3 tabs open with almost no extensions active. Really strange.
Someone told me about the "purge" command in Terminal to free some of the sequestered memory, so I am doing this a few times a day to be able to use Photoshop, Keynote, Premiere and other stuff concurrently without opening and closing apps like I did 10 or 15 years ago, remember those days?
So here are my 2 questions:
Will this frequent "purge" command harm anything in the long run?
If no, is it possible to automate this "purge" Terminal action somehow? Maybe a desktop icon to click, or fully automated? I am a designer, not a coder, so I would need help with that.
Thank you for your input!
Model Name:          MacBook Pro
Model Identifier:          MacBookPro8,2
Processor Name:          Intel Core i7
Processor Speed:          2.3 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          8 MB
Memory:          8 GB
Boot ROM Version:          MBP81.0047.B27

Hello, do any modifier keys work, like Optio/alt?
Could you have Firmware password protection in Mac OS X ...
http://support.apple.com/kb/HT1352
It would block usage of all the startup keys, like C, N, T, D, CMD+s, CMD+Option+p+r, CMD +v, Option, and Shift, as well as booting from anything but the Hard Drive.
Force Removing Password Protection
1) Add or remove DIMMs to change the total amount of RAM in the computer.
2) Then, the PRAM must be reset 3 times. (Command + Option + P + R).
http://www.securemac.com/openfirmwarepasswordprotection.php

Need help with userid/password bypass on iplanet

Similar Messages

Maybe you are looking for