Need help with wifi on iPad 2 and to some extent iPhone 4

I have a few different wireless routers and no matter what I do or how I set them up, my wifi only iPad 2 has very erratic wifi speeds.
I see the same thing but to a lesser degree on my wife's and my iPhone 4 (2 of them).
I have a few year old Apple Airport Extreme and a brand new Cisco Linksys E3200.
The Airport extreme has very little options, but on the E3200 I have tried all the different wifi options (mixed, G only, N only which I can't even connect too) and using both or just one of the dual bands.
I am really at my wit's end here and two trips to the Apple store have yielded nothing. First genius said to wipe the iPad 2 and set it up as a new device and the 2nd genius said buy a new router (which is why I purchased the E3200).
Of course the apple store wifi it behaves flawlessly, but I suspect being an open network helps that...
Anyway, my internet service is uVerse and I get wired Speedtests in the neighborhood of 10-12 Mbps, but on the iPad it never goes above 6 Mbps down.
http://www.speedtest.net/result/1640909582.png - Wired
I have disabled QoS/WMM on the Linksys already...
Thanks in advance

No solutions anyone?
I think I may have the same issues with my iPhone 4S running 5.0.1 too...

Similar Messages

Need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook.......

need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook? removal of cmos, resetting laptop, using cccleaner, windows password recovery and hiren's was noneffective, any help is appreciated. thanks

Hi,
As your notebook is a business class machine, security is more stringent - the password is stored in non-volatile memory and there are no 'backdoor' passwords. Your best option would be to contact HP regarding this.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I need help! I have iPad mini and I can't use App Store. It always asking my credit card lnformation to download, but the apps I will download are free. I don't know how it will work again.

I need help!
I have iPad mini and I can't use App Store.
It always asking my credit card lnformation to download, but the apps I will download are free.
I don't know how it will work again.
Help me please!
Thank you.

You need to have a payment method on file. If the apps are free you will not be charged anything. Either enter your credit card information or purchase and enter an iTunes gift card.

IPad 2 - Need help with wifi set up. (I just took it out of the box)

I just got a new iPad 2, and cannot connect to my wifi. It keeps telling me "Unable to join the Network" I'm not sure what the problem is. I'm in initial set up of my iPad and can't do anything.

There is nothing that you can do if it will not connect to your network other than to use iTunes to activate the device or try another WiFi network where you can setup the iPad. There is no way to get into the settings to troubleshoot WiFi until the iPad is activated.
You can try resetting your router - unplug it from power for about 30 seconds and then plug it back in again. Restart the iPad as well. After you restart the iPad and reboot the router, the iPad might see the network.
Hold down on the power button until the red slider appears at the top of the screen and slide to shut down. Then hold the power button down until the Apple logo appears on the screen to start up again.

Need help with wifi

Hello I want to use Wifi at university, I used to configure it correctly with default options for all fields, now I found a configuration settings about uni's wifi, configured follow it and it does not work, I am using gnome with gnome-network-manager
The configurations are:
Wireless setup: Preferably your computer needs to be set to communicate using 802.11a or 802.11g
networking. 802.11b and 802.11n (draft) are not supported and have not been tested.
TCP/IP: Using DHCP
Security:
Authentication Encryption
WPA (minimum requirement) TKIP
WPA2 AES
EAP Type: Protected EAP (PEAP)
Authentication Method: Secured password (EAP-MSCHAP v2)
Can anyone teach me how to configure it via gnome network manager? When I click the wireless network, a window jumps out with several fields.

http://wiki.archlinux.org/index.php/Wireless
Related to Arch
Most of what you need can be found by searching the web
If you are still having problems then post again

HT4061 I need help with my I-phone 4S and the Cloud, I can't locate my serial number I also have a new 4g I-Pad Can someone help me

I need help to locate my pictures in the cloud
When my son updated my phone early this year it wiped out all my pictues on my I-phone 4S
How do I access the cloud to view my pictures??

Do you have Photo Stream enabled with your iCloud account on your computer?
iCloud is temporary storage - limited to 1,000 photos and 30 days for each photo.
Photos/videos in your iPhone's Camera Roll can and should be imported by your computer as with any other digital camera especially before installing an iOS update.

Need help with Color Profiles between Photoshop and iPhoto

Hey guys, I'm a photographer and have always used Photoshop in comination with iPhoto. I am having great difficulty lately with color profiles randomly changing within albums of pictures. I need all of my images to be in sRGB, but some somehow end up in Adobe RGB. It seems to happen at random. Apple seems to think it's an Adobe problem. Adobe isn't sure what to do. Anybody aware of any known issues between CS5 and iPhoto using OS 10.8.4 with regard to color profiles and how to fix them?

SRiegel schrieb:
I don't know inkscape, but this article seems to indicate that is will support cmyk.
The article also says you need Scribus to then further process the SVG file.
@shaunamm You need to open the SVGin Illustrator, not place it. But I doubt that you will be able to get the effects in Illustrator.

Need help with compositing DPX red footage and workflow

Hi Guys...sorry to repost this..I've tried in many other forums, but haven;'t gotten a straight answer yet, I'm hoping anyone on this page can give advice...
Recently, I was asked by a friend to help on a low budget project by doing some roto and paint work, and some simple composites in After Effects. The question I have is regarding the specific workflow when it comes to dealing with Red Footage in AE. Currently, the project, which is very small, is getting it’s fine cut done by the editor, and their post supervisor asked how I would like the plates to be delivered for comping…I requested 4k 10 bit DPX files set to Red Gamma/ Red Log Film color space, which I understand to be standard for ingesting.
The question I have is the best workflow setup for this in AE? Because AE has recently upgraded with CC 2014, there are several new plug ins that I am not familiar with regarding importing DPX or Open EXR files, and the precise color space to work in so I can have a “normalized” project to comp in…..basically Log to Lin, and then exporting Lin to Log.
This is what I have gathered, and again, I’m not sure if this is correct, so please let me know your thoughts on the best way to work with this:
Basically I was told to work in sRGB color space in AE in order to work with my VFX comps and elements in the “normalized” sRGB linear colorspace, so go “Log to Lin"
1. Import the red footage as 10 bit DPX sequence into AE (with a RedLog Film color gamma applied)…the project settings should be set at 32 bit depth and the working space set to sRGB
2. Right Click on the DPX footage and select “Interpret Footage” select “Main” and then go to the “Color Management” Tab
3. At the “Assign Profile” Box, select “Universal Camera Film Printing Density”. This should “normalize” the footage in the RGB colorspace of the project, and I should be able to see a Rec709 (sRGB) image instead of flat Log.
For the Rendered Output from AE for the colorist…..
Best to render out two different formats, one in Log space for the colorist, and one in a 1080 QT linear space for approvals from the Director
1. In the AE Render queue, set up two output modules…go to “Output Module Settings” and select “Color Management” tab, then select the “Output Profile”.
2. Set the profile to “Universal Camera Film Printing Density”, and the file format to DPX…or whichever the colorist requests as the file format (png, Tiff, etc)
3. The second module can be set to sRGB in QT for approvals
Does this make sense? Is there a better way? Am I on point? Thanks so much, I really want to have this nailed down before I continue.

Jason talks about merging clips right a the beginning of the video.
http://tv.adobe.com/watch/cs-55-production-premium-feature-tour-/adobe-creative-suite-55-p roduction-premium-feature-tour-overview/

Need help with Go Pro Hero 3 and Premiere Pro CS6

Hello,
I recently acquired PP CS6. I put my clip (30 seconds long) and I go to preview while editing, for the first 1.5 seconds it is fine but then it is very choppy. The audio is fine but the video does not play smoothly. When I save and process the video it is fine. It is frustrating to try to edit video this way. I'm sure I'm missing a step when creating the project but I haven't used Premiere Pro since CS6. This is only happening with Go Pro Hero 3 videos, any of my other cameras are fine. Any ideas? Thanks

There's a lot of confusion over how video encoding affects subsequent editing performance - a higher data rate has no direct relation to how much effort is required to decode and play the footage, in fact a higher data rate often makes playback easier - which is why transcoding to AVI can help with playback even though the files can be hundreds of times larger. Data rates with the same codec depend on the frame contents and recording quality, but for playback and editing what matters is the GOP (group-of-pictures) structure and the complexity of the encoding algorithm. Provided your disks are fast enough the data rate is immaterial to Premiere.
With long-GOP files (as typically created by consumer DSLRs and helmet cams) we have keyframes (I-frames) with a complete set of pixel data, then a series of intervening P- and B-frames which only store the difference between 'now' and 'one frame before' or 'one frame after'. Unless you're on an I-frame you have to calculate the chain of differences from the nearest I-frame, and when editing or applying an effect we must re-calculate the entire GOP, so Premiere has to hold a lot of data in the buffer. Remember all timelines in Premiere are internally transcoded to 32-bit floating point, so it's more work to 'play' the footage in the monitors than would be done by a simple playback-only application such as VLC, or in some other brands of NLE that only work in the footage's color space. Premiere's hardware acceleration (MPE) only kicks in once the buffer has been ingested, all the decoding of the original H.264 frames happens in your CPU.
With digital cinema cameras and some hacked DSLRs, we record "all-I" footage - so there's no GOP overhead and playback/editing is massively smoother. I can scrub all-I footage from a hacked 7D no problem on my relatively-ancient spare laptop, but the long-GOP files from a factory 7D struggle to play at all. Our all-I 7D footage can hit 300MBit/s compared to 35 for long-GOP. Helmet cams such as the GoPro do all they possibly can to squeeze data onto their storage cards, which means they have long-GOP codecs that have some of the most complicated compression algorithms out there. The Hero3's implementation of H.264 uses the Ambarella chip, whose files are very small but an utter nightmare to decode - hence far more of a demand on your CPU than an equivalent clip from a DSLR.
Jim Simon wrote:
Might be the 35 Mbps that is causing the choppy playback.
It shouldn't, assuming sufficient hardware. My GH2 clips often get up to over 90 Mb/s and play just fine on an older i7 920.

I need help with changing my payment info and I have to accounts I want to delete one can u please help

I need help trying to change my payment info I can't but I have to accounts and I want to delete one please help me

We can't help. We're not Apple. Contact the iTunes store support. There's a link on the bottom of every page of the iTunes store

Need help with h264 for ipads

need recomendation for cross platform h264s encoding settings for ipads 2, 3, iphones, and pc. my typical settings are in adobe media encoder are:
720x480, 29.97fps lower (do VBR2 target 0.50 mbps max 0.80 mbps (our service/host provider is using amazon servers and recommending these targets which IMO are to low)
Profile is Main and level is 3.1 seems to play on some with io5 but not io6
streaming compatiblity setting is standard.
If you can help me I would appreciated any advice.
Lindsey

My main advice is to use the iPad presets in Adobe Media Encoder. Tried that?

Need help with ORACLE ADMIN, NETWORKING CONCEPTS and SQL, ASAP!

Hey everyone. Basically my major is going to be computer science, however I haven't started the course yet. However I got a job offering to the position as a SEO. A friend told me as long as I can answer the questions, the job will be no problem, I mainly just google oracle commands to put in all day. So I'm really needing someone who knows about this stuff, that could help me with some of these questions. If you can help, and have the time, my skype ID is drakkarnc
I greatly appreciate this, thank you. :)

841784 wrote:
Hey everyone. Basically my major is going to be computer science, however I haven't started the course yet. However I got a job offering to the position as a SEO. What is "SEO"?
A friend told me as long as I can answer the questions, the job will be no problem, I mainly just google oracle commands to put in all day. So I'm really needing someone who knows about this stuff, that could help me with some of these questions. If you can help, and have the time, my skype ID is drakkarnc
I greatly appreciate this, thank you. :)YOu think you can learn this stuff in a few days? Think again.
Re: What to learn first for DBA/DEV?

Need help with Low disk space issue and blue screen

Hi Everyone, just seen a message stating a low disk space on my Mac pro bought last November and tried plugging in an external hard drive to remove some pictures to free up some space but it seems that the computer did not have enough space left to start up and run the hard drive. I then tried to restart and ended up with a blue screen and have no knowledge now how to fix this problem. I phoned support but they say I have no technical support left but do have warranty and I would need to either try with the community here or take the unit to an apple store for an appointment. The store is an 1 and 1/2 from me and I really want o see if there is another fix that could allow me to start again then remove some files and then add external drive to remove more. I was blown away at the low amount of storage.....looked for the icloud option last night to upload there as i was told about this by a UK client of mine and now see it is not up and running. Any advice or help by the communtiy would be greatly appreciated as this is my business and travelling laptop. Cheers, Dean <")))><

Great to hear Dean, thanks!
Further notes: OSX needs about 15% or 10GB Free space minimum, but will run mucch faster/safer with 30-40% or 50GB of Free Space... Free Space is no longer ours to use.
Another tool to help clear up assorted things is Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.

Need help with choosing a 6 cell and 9 cell battery (mo06, mo09)

Hey hi all,
I have a pavilion m6 series notebook which comes with mo06(6 cell) battery by default.
I need to replace the battery with a new one and I've come across a mo09 (9 cell) battery with the same price as that of mo06.
I've no idea if mo09 batteries can be used instead of mo06.
If anyone who knows anything about this please help me choose.
Here's the link
http://hpshopping.in/Accessories/Batteries
Thanks a lot in advance

Hi
Sorry was the delay wanted to make sure the battery should work fine for your unit.
672412-001 SPS-BATT 9C 100WHr 3.0AH LI MO09100-CL
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Need help with Forms on iPad

I am trying to view and submit forms on my iPad. I've created a form in LiveCycle and emailed it to myself but I am unable to view or open the PDF form with the Adobe Reader app. Please help!

Hi Randy - I have Adobe Acrobat Pro 9.5 and when I try to create a new form a pop-up comes up saying that the form will be edited in Adobe LiveCycle designer and that Adobe Acrobat will close. I do not have the option to stay in Adobe Acrobat. Any idea how to stay in Adobe Acrobat instead of moving into LiveCycle? I want to create some PDF forms that can be filled out on an iPad in Adobe Reader and then emailed. Thank you!

Need help with wifi on iPad 2 and to some extent iPhone 4

Similar Messages

Maybe you are looking for