Need help with writing a rule

Need help with some rules. I want to book a number to a specific Entity at a Specific Custom 4 only. I don't want this formula to work at all C4 levels. How can this be done?
for example if Entity is "XBM1123" and we use C4 for tracking and the tracking level I want to book it to is IMPORT, how can this be done for a specific account 4400221
I have my formula as
If pov_value = "<Entity Currency>" or pov_value = "<Entity Curr Adjs>" Then
If HS.Entity.Member = "XBM1123" or HS.Custom4.Member = "IMPORT" then
HS.EXP "A#4400221= A#4521111 + A#3526644 + A#635210"
End If
End if
this did not work. I got hte following error
Calculate started.<BR>Error executing VBScript Microsoft VBScript runtime
error, Line 259:Object doesn't support this property or method:
'HS.Custom4.Member'.<BR>Calculate finished.<BR>Error executing
VBScript %0.
I then changed it to the below and it still did not work
If pov_value = "<Entity Currency>" or pov_value = "<Entity Curr Adjs>" Then
If HS.Entity.Member = "XBM1123" then
HS.EXP "A#4400221.C4#IMPORT= A#4521111 + A#3526644 + A#635210"
End If
End if
error
Invalid Custom1 member
specified for this function.
Invalid Destination specified for this function:
A#4400221.C4#IMPORT.

You are close.
Try:
If pov_value = "<Entity Currency>" or pov_value = "<Entity Curr Adjs>" Then
    If HS.Entity.Member = "XBM1123" then
       HS.EXP "A#4400221.C4#IMPORT= A#4521111.C4#IMPORT + A#3526644.C4#IMPORT + A#635210.C4#IMPORT"
    End If
End if
or replace IMPORT with with Top_C4 or what ever member you need to copy to C4#IMPORT.
Rule of thumb, to be on the safe side and for most simple calcs, is if you mention a dimension on the left side, you need to define it on the right side as well.

Similar Messages

Need help with writing a query with dynamic FROM clause

Hi Folks,
I need help with an query that should generate the "FROM" clause dynamically.
My main query is as follows
select DT_SKEY, count(*)
from *???*
where DT_SKEY between 20110601 and 20110719
group by DT_SKEY
having count(*) = 0
order by 1; The "from" clause of the above query should be generated as below
select 'Schema_Name'||'.'||TABLE_NAME
from dba_tables
where OWNER = 'Schema_Name'Simply sticking the later query in the first query does not work.
Any pointers will be appreciated.
Thanks
rogers42

Hi,
rogers42 wrote:
Hi Folks,
I need help with an query that should generate the "FROM" clause dynamically.
My main query is as follows
select DT_SKEY, count(*)
from *???*
where DT_SKEY between 20110601 and 20110719
group by DT_SKEY
having count(*) = 0
order by 1; The "from" clause of the above query should be generated as below
select 'Schema_Name'||'.'||TABLE_NAME
from dba_tables
where OWNER = 'Schema_Name'
Remember that anything inside quotes is case-sensitive. Is the owner really "Schema_Name" with a capital S and a capital N, and 8 lower-case letters?
Simply sticking the later query in the first query does not work.Right; the table name must be given when you compile the query. It's not an expression that you can generate in the query itself.
Any pointers will be appreciated.In SQL*Plus, you can do something like the query bleow.
Say you want to count the rows in scott.emp, but you're not certain that the name is emp; it could be emp_2011 or emp_august, or anything else that starts with e. (And the name could change every day, so you can't just look it up now and hard-code it in a query that you want to run in the future.)
Typically, how dynamic SQL works is that some code (such as a preliminary query) gets some of the information you need to write the query first, and you use that information in a SQL statement that is compiled and run after that. For example:
-- Preliminary Query:
COLUMN     my_table_name_col     NEW_VALUE my_table_name
SELECT     table_name     AS my_table_name_col
FROM     all_tables
WHERE     owner          = 'SCOTT'
AND     table_name     LIKE 'E%';
-- Main Query:
SELECT     COUNT (*)     AS cnt
FROM     scott.&my_table_name
;This assumes that the preliminary query will find exactly one row; that is, it assumes that SCOTT has exactly one table whose name starts with E. Could you have 0 tables in the schema, or more than 1? If so, what results would you want? Give a concrete example, preferably suing commonly available tables (like those in the SCOTT schema) so that the poepl who want to help you can re-create the problem and test their ideas.
Edited by: Frank Kulash on Aug 11, 2011 2:30 PM

Help with writing body_checks rules

I was wondering if anyone knew of a good source to refer to for writing body_check rules for Postfix. I am having an issue with a few rules that I have written to block spam, but I am blocking legitimate mail as well - the legitamate mail does not seem to meet the rule's criteria.
Here is an example of my rule:
/NMXC/ REJECT Spam Rule Number 88
I want to block the word or stock id "NMXC" but it is blocking emails that do not contain "NMXC".
Any help would be appreciated.
Thanks,
Tony

I am sure that it is the rule that is being triggered. I list my rule responses as "Spam Rule" and then a line number so that I can keep up with which rules are causing the rejection.
I have disabled most of my Spam Rules for body_checks because I was getting so many false positives.
Jan 15 04:10:10 Macintosh postfix/cleanup[19746]: B5CB910512D3: reject: body HZeppHyAgMCRMAW3A7j/AFYaKEC9RlCAMW6gAh2YgNw0gCsoQCByACDAwQAQAQqwAASwSlcSSjMB from 125.red-213-96-130.staticip.rima-tde.net[213.96.130.125]; from=<[email protected]> to=<[email protected]> proto=SMTP helo=<125.Red-213-96-130.staticIP.rima-tde.net>: Spam Rule Number 85
I don't know if this is true junk or not. The log is so old. I had several people who had legitimate mail rejected and when I asked their sender to let me know if it contain the phrase or word that was rejected by Spam Rule Number 85 the response was always no.
Perhaps I need to place a space between my slashes...would that help? In other words make the filter look like this:
/ wordtoreject / Spam Rule Number 85.
By the way, thanks for responding.

Need help with writing to a file

I am writing a program that is a file sharing program where i read in bytes from a socket in a BufferedReader into a char[]. Then i want to write to a file using FileOutputStream which only lets me write with a byte[]. Is there a way to read in the info into a byte[] rather a char[]?

may be this code helps
import java.io.*;
public class cp
        public static void main(String args[])
                try
                File my=new File("source.txt");
                FileReader fr=new FileReader(my);
                BufferedReader br=new BufferedReader(fr);
                String a;
                FileWriter fw=new FileWriter(args[5]);
                while((a=br.readLine())!=null)
                        System.out.println(a);
fw.write(a);
fw.close();
                }catch(Exception e){}

Need help with writing a program

how would i write a program with one integer variable i that outputs the numbers 1 to 5 on one line. The program may use the System.out.println to only ouput either the variable i or a space (" ").

which one is it in?Boy, you are a lazy one, aren't you. Anyway,
it's in the section about "Control Flow Statements":
http://java.sun.com/docs/books/tutorial/java/nutsandbo
lts/flow.html
But if you are not familiar with for-loops I suggest
that you read the whole tutorial.Unless, of course, the assignment is due in tomorrow morning at 8, and it's now past midnight in your timezone.

Need help with writing a validation...?

Hi gurus,
Greetings!!!
I have been given the task to do validations in FI....The requirement that I have is as follows:
Description: Insurance Type is valid
Pre-requisites: BSEG-ZZITY < >
Pseudocode: Store Posting Date BKPF-BUDAT to i_END_DT and BSEG-ZZITY to i_ZZITY and check that in Z-table ZTFICO_ZZITY_V ZTFICO_ZZITY_V END_DT > than i_END_DT where ZZITY = i_ZZITY
If not (Insurance Type not found or END_DT < BKPF-BUDAT) issue an error message Insurance Type &Insurance Type& is not valid
It has to be written as a user exit...i know we have to do it in ob28...how shud i proceed and what kind of code shud i write...
Please give suggestions..so that i can start working on it..
Thanks
Cheers: SAM
Message was edited by:
        Sam williams

Hi,
if not BSEG-ZZITY is initial.
move : BKPF-BUDAT to i_END_DT,
         BSEG-ZZITY to i_ZZITY.
select single * from z-table into <workarea>-ZTFICO_ZZITY_V ZTFICO_ZZITY_V
         where end_dt > i_end_dt
           and ZZITY eq i_ZZITY.
if sy-subrc ne 0.
    message e999(YYY) with "<<<<<<<< give your message
endif,
if sy-subrc eq 0 and ZTFICO_ZZITY_V ZTFICO_ZZITY_V END_DT < BKPF-BUDAT.
   message e999(YYY) with "<<<<<<<< give your message
endif.
endif.
aRs

Need help with writing an equation in java

Hey, does anybody know how to write x - ((x^3)/6) in java.
Thats x to the power 3
Thanks

google "java.lang.Math pow" for information on the power method. beyond that, it should be pretty straightforward
edit: I feel extra helpful today:
java.sun.com/j2se/1.5.0/docs/api/java/lang/Math.html
Edited by: redfalconf35 on Nov 5, 2007 11:35 AM

Help with writing and retrieving data from a table field with type "LCHR"

Hi Experts,
I need help with writing and reading data from a database table field which has a type of "LCHR". I have given an example of the original code but don't know what to change it to in order to fix it and still read in the original data that's stored in the LCHR field.
Basically we have two Function modules, one that saves list data to a database table and one that reads in this data. Both Function modules have an identicle table which has an array of fields from type INT4, CHAR, and type P. The INT4 field is the first one.
Incidentally this worked in the 4.7 non-unicode system but is now dumping in the new ECC6 Unicode system.
Thanks in advance,
C
SAVING THE LIST DATA TO DB
DATA: L_WA(800).
LOOP AT T_TAB into L_WA.
ZDBTAB-DATALEN = STRLEN( L_WA ).
MOVE: L_WA to ZDBTAB-RAWDATA.
ZDBTAB-LINENUM = SY-TABIX.
INSERT ZDBTAB.
READING THE DATA FROM DB
DATA: BEGIN OF T_DATA,
             SEQNR type ZDBTAB-LINENUM,
             DATA type ZDBTAB-RAWDATA,
           END OF T_TAB.
Select the data.
SELECT linenum rawdata from ZDBTAB into table T_DATA
     WHERE repid = w_repname
     AND rundate = w_rundate
     ORDER BY linenum.
Populate calling Internal Table.
LOOP AT T-DATA.
APPEND T_DATA to T_TAB.
ENDLOOP.

Hi Anuj,
The unicode flag is active.
When I run our report and then to try and save the list data a dump is happening at the following point
LOOP AT T_TAB into L_WA.
As I say, T_TAB consists of different fields and field types whereas L_WA is CHAR 800. The dump mentions UC_OBJECTS_NOT_CONVERTIBLE
When I try to load a saved list the dump is happening at the following point
APPEND T_DATA-RAWDATA to T_TAB.
T_DATA-RAWDATA is type LCHR and T_TAB consists of different fields and field types.
In both examples the dumps mention UC_OBJECTS_NOT_CONVERTIBLE
Regards
C

Help with writing a formula

Hi all,
I am creating a report, and need help with writing a formula...
I am creating a report that shows how many visits/touches our reps have made to various grade accounts. It is broken down by calendar week, and I currently have a weekly "goal" number set that the reps have to meet. That "goal" number increases each week to keep a running total. (example: week 1: 7, week 2: 14, week 3: 21)
I have created some different formulas and one is this:
SUM("Activity Metrics"."# of Activities" BY Date."Calendar Week")
What this shows me is how many "visits" there are per calendar week to customers, however it show me the total for all reps per week.
What I need is that total to show, but totaled for each rep individually.
What I was trying is this:
SUM("Activity Metrics"."# of Activities" BY Date."Calendar Week") BY Employee."Employee Name"
But...I keep getting an error.
Any suggestions?
I have the reporting book by Lairson, and have been referring to it...but my brain at this point is fried.
Thanks in advance for any help...(please forgive...I am new to OnDemand, and I am sure this is easy)

Thanks for helping!
I created this formula as a column: SUM ("Activity Metrics"."# of Activities" BY Date."Calendar Week"), it is called "total number of visits per week" and it shows the totaled number of visits that all the reps have done per calendar week. For example: Week 1: 10 visits, Week 2: 37 visits, Week 3: 20 visits.
What I would like to do is take that column and break it down further, to show instead how many visits per week by sales rep there have been
So what I was trying was to take the "total number of visits per week" (SUM ("Activity Metrics"."# of Activities" BY Date."Calendar Week")) and use "Activity Owner" (Employee."Employee Name") to break it down further.
What I need to use is the total number of visits each rep has per calendar week.
I think I am getting the error because you can't use "BY" twice in a formula?

Need help with a currently "in-use" form we want to switch to Adobes hosting service

Hi, I am in desperate need of help with some issues concerning several forms which we currently use a paid third party (not Adobe) to host and "re-distribute through email"...Somehow I got charged $14.95 for YOUR service, (signed up for a trial, but never used it)..and now I am paying for a year of use of the similar service which Adobe is in control of. I might want to port my form distribution through Adobe in the hopes of reducing the errors, problems and hassles my customers are experiencing when some of them push our "submit button". (and I guess I am familiar with these somewhat from reading what IS available in here, and I also know that, Adobe is working to alleviate some of these " submit" issues, so let's don't start by going backwards, here) I need solutions now for my issues or I can leave it as is, If Adobe's solution will be no better for my end users...
We used FormsCentral to code these forms and it works for the most part (if the end-user can co-operate, and thats iffy, sometimes), but I need help with how to make it go through your servers (and not the third party folks we use now), Not being cruel or racist here, but your over the phone "support techs" are about horrible & I cannot understand them or work with any of them, so I would definitely need someone who speaks English and can understand the nuances of programming these forms, to please contact me back. (Sorry, but both those attributes will be required to be able to help me, so, no "newbie-interns" or first week trainees are gonna cut it).... If you have anyone who fits the bill on those items and would be willing to help us, please contact me back at your earliest convenience. If we have to communicate here, I will do that & I can submit whatever we need to & to whoever we need to.
I need to get this right and working for the majority of my users and on any platform and OS.
You may certainly call me to talk about this, and I have given my number numerous times to your (expletive deleted) time wasting - recording message thingy. So, If it's not available look it up under [email protected]
(and you will probably get right to me, unlike my and I'm sure most other folks', "Adobe phone-in experiences")
Thank You,
Michael Corman
VinylCouture
Phenix City, Alabama 36869

Well, thanks for writing back...just so you know...I started using Adobe products in 1987, ...yeah...back then...like Illustrator 1 & 9" B&W Macs ...John Warnock's Helvetica's....stuff like that...8.5 x 11 LaserWriters...all that good stuff...I still have some of it working on a mac...much of it was stuff I bought. some stuff I did not...I'm not a big fan of this "cloud" thing Adobe has foisted upon the creatives of the world...which I'm sure you can tell...but the functionality and usefulness of your software can not be disputed, so feel free to do whatever we will continue to pay for, ...I am very impressed with CC PS on the 64 bit PC and perhaps I will end up paying you the stipend that you demand for the other services.
So I guess that brings us to our problem.. a few years back and at the height of the recession and near bankruptcy myself, I was damn lucky and hit on something and began a small arts and crafts supply service to sell my products online to a very "niche market" ...I had a unique product and still sell that product (plus others) online...My website is www.vinylcouture.com...Strange? Yes...but there is a market it seems, for everything now, and this is the market I service...Catagorically, these are 99%+ women that use these "adhesive, sticky backed vinyl products" to make different "craft items" that are just way too various and numerous to go into... generally older women, women who are computer illiterate for the most part...and all this is irrelevant to my problem, but I want you to have every bit of background on this and especially the demographic we are dealing with, so we can get right to the meat of the problem.
OK...So about two years ago, I decided to offer a "plain sheet" product of a plain colored "stick back" vinyl... it is available in multiple quantities of packs ( like 5 pieces, 10 pieces, 15 pieces, in a packi & so on)...and if you are still on my site.. go to any "GO RIGHT TO OUR ORDER PAGE" button, scroll down a little...and then to the "PLAIN VINYL" section...you will see the Weebly website order process.) You can back out from here, I think,..but, anyway this product is available in 63 colors + or - a few. So then the problem is, how do they select their individual colors within that (whatever) pack?... .
So my initial idea was to enable a "selection form" for these "colors" that would be transmitted to me via email as 'part" of the "order process".. We tried getting our customers to submit a " a list" ( something my competitiors still do, lol, poor bastards)......but that..is just unbelievable..I can't even begin to tell you what a freakin' nightmare that was...these people cannot even count to 10, much less any higher... figuring out what colors to list and send me... well, lets just say, it wasn't working......I had to figure out a better way...Something had to be done.
So after thinking this all out, and yeah...due to my total ignorance, i figured that we could make a form with Live Cycle Designer (Now Forms Central)...(back then something that was bundled with Adobe Acrobat Pro), I believe, and thats what this thing was authored in... and it would be all good...LOL!
Well not so simple...as you well know, Adobe Acrobat would NOT LET YOU EMAIL anything from itself.....it just wouldn't work (and I know why, and all that hooey), but not being one to take NO for answer,.I started looking for a way to make my little gizmo work.. So I found this company that said they can "hijack" (re-direct actually) the request to email, bypass the wah-wah, and re-transmit it to the proper parties.....for less than $100 a year, I think...its called http://pdf-fillableforms.com/.
A nice gentleman named Joseph Silva helped us program the thing to go to his servers and back out. Please dont hassle them...I need them...for now..it basically does work...try it...you should get back a copy of the form that you filled out...good luck however, if you're on MAC OSX or similar...
I have included a copy of both of our forms (and feel free to fill it out and play with it)...just put test somewhere on it...(and you must include YOUR email or it will balk)..they are supposed to be mostly identical, except one seems to be twice as large....generating a 1.7 meg file upon submission, while the other one only generates a 600K file or so...thats another issue for another day or maybe you can advise on that also...
OK so far so good......In our shop, once Grandma buys a 10 pack (or whatever), Only then she gets to the link on her receipt page ro the relevant "selection form" ,(this prevents "Filling and Sending" with "no order" and "no payment", another early problem we had)... which they can click on and it will usually download and open up on their device if all goes well...Then our little form is supposed to be fillable and is supposed to ADD UP all the quantities, so grandma knows how many she is buying and so forth right on the fly, and even while she changes her mind..., and IT'S LARGE so grandma can see it, and then it TOTALS it all up for them, ( cause remember, they can NOT add).., except there is a programming bug (mouse-click should be a mouse-up probably or something..) which makes you click in the blank spaces to get to a correct TOTAL...about 70-80% of our customers can enable all these features and usually the process completes without problems for them especially on PC's running Windows OS and Acrobat Reader X or XI...at least for most... Unfortunately it is still not the "seamless process" I would like or had envisioned for the other folks out there that do have trouble using our form.... Many folks report to us the following issues that we know of. First of all it takes too much time to load up...We know its HUGE...is there anyway that you can see, to streamline this thing? I would love for it to be more compact...this really helps on the phones and pads as I'm sure you well know.
Some just tell us,"it WON'T work"....I believe this is because they are totally out of it and dont even have Adobe Reader on their machine, & don't know how to get it ( yes, we provide the links).....or it's some ancient version....no one can stop this one...
It almost always generates some kind ( at least one time) of "error message" which we do warn them about..., telling one, basically that "Acrobat doesnt even like this happening at all, and it could be detrimental to ones computer files", blah-blah...(this freaks grandma out really bad)...& usually they end up not even trying to send it... and then I get calls that even you wouldn't believe...& If they DO nut up and push the Red "Submit Form" button, it will usually send the thing to us (and also back to them at the "required email address" they furnished on the form, thats what the folks at the "fillable forms place" do) so, if it's performing it's functions, why it is having to complain?. What are we doing wrong?....and how can I fix it?...Will re-compiling it or saving it as a newer version of "FormsCentral" correct any of these problems ?
Ok, so that should keep you busy for a minute and we can start out with those problems...but the next thing is, how can I take advantage of YOUR re-direct & hosting services?, And will it get rid of the error messages, and the slowness, and the iOS incompatibilities ? (amazingly, the last iOS Reader version worked almost OK.. but the newest version doesnt seem to work with my form on my iphone4) If it will enable any version of the iOS to send my form correctly and more transparently, then it might be worth the money...$14.95 a MONTH you say. hmmmmm...Better be good.
Another problem is, that I really don't need 5000 forms a month submitted. I think its like 70-100 or less....Got any plans for that? Maybe I'm just not BIG ENOUGH to use Adobe's services, however in this case, I really don't care whose I do use as long as the product works most correctly for my customers as well as us. Like I said, If I'm doing the best I can, I won't change anything, and still use the other third party, If Adobe has a better solution, then i'm all for that as well. In the meantime, Thanks for any help you can provide on this...
Michael Corman
VinylCouture.com
(706) 326-7911

Need Help With File Matching Records

I need help with my file matching program.
Here is how it suppose to work: FileMatch class should contain methods to read oldmast.txt and trans.txt. When a match occurs (i.e., records with the same account number appear in both the master file and the transaction file), add the dollar amount in the transaction record to the current balance in the master record, and write the "newmast.txt" record. (Assume that purchases are indicated by positive amounts in the transaction file and payments by negative amounts.)
When there is a master record for a particular account, but no corresponding transaction record, merely write the master record to "newmast.txt". When there is a transaction record, but no corresponding master record, print to a log file the message "Unmatched transaction record for account number ..." (fill in the account number from the transaction record). The log file should be a text file named "log.txt".
Here is my following program code:
// Exercise 14.8: CreateTextFile.java
// creates a text file
import java.io.FileNotFoundException;
import java.lang.SecurityException;
import java.util.Formatter;
import java.util.FormatterClosedException;
import java.util.NoSuchElementException;
import java.util.Scanner;
import org.egan.AccountRecord;
import org.egan.TransactionRecord;
public class CreateTextFile
private Formatter output1; // object used to output text to file
private Formatter output2; // object used to output text to file
// enable user to open file
public void openTransFile()
    try
      output1 = new Formatter("trans.txt");
    catch (SecurityException securityException)
      System.err.println("You do not have write access to this file.");
      System.exit(1);
    } // end catch
    catch (FileNotFoundException filesNotFoundException)
      System.err.println("Error creating file.");
      System.exit(1);
} // end method openTransFile
// enable user to open file
public void openOldMastFile()
    try
      output2 = new Formatter("oldmast.txt");
    catch (SecurityException securityException)
      System.err.println("You do not have write access to this file.");
      System.exit(1);
    } // end catch
    catch (FileNotFoundException filesNotFoundException)
      System.err.println("Error creating file.");
      System.exit(1);
} // end method openOldMastFile
// add transaction records to file
public void addTransactionRecords()
    // object to be written to file
    TransactionRecord record1 = new TransactionRecord();
    Scanner input1 = new Scanner(System.in);
    System.out.printf("%s\n%s\n%s\n%s\n\n",
      "To terminate input, type the end-of-file indicator",
      "when you are prompted to enter input.",
      "On UNIX/Linux/Mac OS X type <ctrl> d then press Enter",
      "On Windows type <ctrl> z then press Enter");
    System.out.printf("%s\n%s",
       "Enter account number (> 0) and amount.","? ");
    while (input1.hasNext()) // loop until end-of-file indicator
      try // output values to file
        // retrieve data to be output
        record1.setAccount(input1.nextInt());    // read account number
        record1.setAmount(input1.nextDouble()); // read amount
        if (record1.getAccount() > 0)
          // write new record
          output1.format("%d %.2f\n", record1.getAccount(), record1.getAmount());
        } // end if
        else
          System.out.println("Account number must be greater than 0.");
        } // end else
      } // end try
      catch (FormatterClosedException formatterClosedException)
        System.err.println("Error writing to file.");
        return;
      } // end catch
      catch (NoSuchElementException elementException)
        System.err.println("Invalid input. Please try again.");
        input1.nextLine(); // discard input so user can try again
      } // end catch
      System.out.printf("%s %s\n%s", "Enter account number (> 0) ",
        "and amount.","? ");
    } // end while
} // end method addTransactionRecords
// add account records to file
public void addAccountRecords()
    // object to be written to file
    AccountRecord record2 = new AccountRecord();
    Scanner input2 = new Scanner(System.in);
    System.out.printf("%s\n%s\n%s\n%s\n\n",
      "To terminate input, type the end-of-file indicator",
      "when you are prompted to enter input.",
      "On UNIX/Linux/Mac OS X type <ctrl> d then press Enter",
      "On Windows type <ctrl> z then press Enter");
    System.out.printf("%s\n%s",
       "Enter account number (> 0), first name, last name and balance.","? ");
    while (input2.hasNext()) // loop until end-of-file indicator
      try // output values to file
        // retrieve data to be output
        record2.setAccount(input2.nextInt());    // read account number
        record2.setFirstName(input2.next());      // read first name
        record2.setLastName(input2.next());       // read last name
        record2.setBalance(input2.nextDouble()); // read balance
        if (record2.getAccount() > 0)
          // write new record
          output2.format("%d %s %s %.2f\n", record2.getAccount(), record2.getFirstName(),
            record2.getLastName(), record2.getBalance());
        } // end if
        else
          System.out.println("Account number must be greater than 0.");
        } // end else
      } // end try
      catch (FormatterClosedException formatterClosedException)
        System.err.println("Error writing to file.");
        return;
      } // end catch
      catch (NoSuchElementException elementException)
        System.err.println("Invalid input. Please try again.");
        input2.nextLine(); // discard input so user can try again
      } // end catch
      System.out.printf("%s %s\n%s", "Enter account number (> 0),",
        "first name, last name and balance.","? ");
    } // end while
} // end method addAccountRecords
// close file
public void closeTransFile()
    if (output1 != null)
      output1.close();
} // end method closeTransFile
// close file
public void closeOldMastFile()
    if (output2 != null)
      output2.close();
} // end method closeOldMastFile
} // end class CreateTextFile--------------------------------------------------------------------------------------------------
// Exercise 14.8: CreateTextFileTest.java
// Testing class CreateTextFile
public class CreateTextFileTest
   // main method begins program execution
   public static void main( String args[] )
     CreateTextFile application = new CreateTextFile();
     application.openTransFile();
     application.addTransactionRecords();
     application.closeTransFile();
     application.openOldMastFile();
     application.addAccountRecords();
     application.closeOldMastFile();
   } // end main
} // end class CreateTextFileTest-------------------------------------------------------------------------------------------------
// Exercise 14.8: TransactionRecord.java
// A class that represents on record of information
package org.egan; // packaged for reuse
public class TransactionRecord
private int account;
private double amount;
// no-argument constructor calls other constructor with default values
public TransactionRecord()
    this(0,0.0); // call two-argument constructor
} // end no-argument AccountRecord constructor
// initialize a record
public TransactionRecord(int acct, double amt)
    setAccount(acct);
    setAmount(amt);
} // end two-argument TransactionRecord constructor
// set account number
public void setAccount(int acct)
    account = acct;
} // end method setAccount
// get account number
public int getAccount()
    return account;
} // end method getAccount
// set amount
public void setAmount(double amt)
    amount = amt;
} // end method setAmount
// get amount
public double getAmount()
    return amount;
} // end method getAmount
} // end class TransactionRecord -------------------------------------------------------------------------------------------------
// Exercise 14.8: AccountRecord.java
// A class that represents on record of information
package org.egan; // packaged for reuse
import org.egan.TransactionRecord;
public class AccountRecord
private int account;
private String firstName;
private String lastName;
private double balance;
// no-argument constructor calls other constructor with default values
public AccountRecord()
    this(0,"","",0.0); // call four-argument constructor
} // end no-argument AccountRecord constructor
// initialize a record
public AccountRecord(int acct, String first, String last, double bal)
    setAccount(acct);
    setFirstName(first);
    setLastName(last);
    setBalance(bal);
} // end four-argument AccountRecord constructor
// set account number
public void setAccount(int acct)
    account = acct;
} // end method setAccount
// get account number
public int getAccount()
    return account;
} // end method getAccount
// set first name
public void setFirstName(String first)
    firstName = first;
} // end method setFirstName
// get first name
public String getFirstName()
    return firstName;
} // end method getFirstName
// set last name
public void setLastName(String last)
    lastName = last;
} // end method setLastName
// get last name
public String getLastName()
    return lastName;
} // end method getLastName
// set balance
public void setBalance(double bal)
    balance = bal;
} // end method setBalance
// get balance
public double getBalance()
    return balance;
} // end method getBalance
// combine balance and amount
public void combine(TransactionRecord record)
    balance = (getBalance() + record.getAmount());
} // end method combine
} // end class AccountRecord -------------------------------------------------------------------------------------------------
// Exercise 14.8: FileMatch.java
import java.io.File;
import java.io.FileNotFoundException;
import java.lang.IllegalStateException;
import java.util.NoSuchElementException;
import java.util.Scanner;
import java.util.Formatter;
import java.util.FormatterClosedException;
import org.egan.AccountRecord;
import org.egan.TransactionRecord;
public class FileMatch
private Scanner inTransaction;
private Scanner inOldMaster;
private Formatter outNewMaster;
private Formatter theLog;
// enable user to open file
public void openTransFile()
    try
      inTransaction = new Scanner(new File("trans.txt"));
    } // end try
    catch (FileNotFoundException fileNotFoundException)
      System.err.println("Error opening file.");
      System.exit(1);
    } // end catch
} // end method openTransFile
// enable user to open file
public void openOldMastFile()
    try
      inOldMaster = new Scanner(new File("oldmast.txt"));
    } // end try
    catch (FileNotFoundException fileNotFoundException)
      System.err.println("Error opening file.");
      System.exit(1);
    } // end catch
} // end method openOldMastFile
// enable user to open file
public void openNewMastFile()
    try
      outNewMaster = new Formatter("newmast.txt");
    catch (SecurityException securityException)
      System.err.println("You do not have write access to this file.");
      System.exit(1);
    } // end catch
    catch (FileNotFoundException filesNotFoundException)
      System.err.println("Error creating file.");
      System.exit(1);
} // end method openNewMastFile
// enable user to open file
public void openLogFile()
    try
      theLog = new Formatter("log.txt");
    catch (SecurityException securityException)
      System.err.println("You do not have write access to this file.");
      System.exit(1);
    } // end catch
    catch (FileNotFoundException filesNotFoundException)
      System.err.println("Error creating file.");
      System.exit(1);
} // end method openLogFile
// update records
public void updateRecords()
    TransactionRecord transaction = new TransactionRecord();
    AccountRecord account = new AccountRecord();
    try // read records from file using Scanner object
      System.out.println("Start file matching.");
      while (inTransaction.hasNext() && inOldMaster.hasNext())
        transaction.setAccount(inTransaction.nextInt());     // read account number
        transaction.setAmount(inTransaction.nextDouble());   // read amount
        account.setAccount(inOldMaster.nextInt());     // read account number
        account.setFirstName(inOldMaster.next());      // read first name
        account.setLastName(inOldMaster.next());       // read last name
        account.setBalance(inOldMaster.nextDouble()); // read balance
        if (transaction.getAccount() == account.getAccount())
          while (inTransaction.hasNext() && transaction.getAccount() == account.getAccount())
            account.combine(transaction);
            outNewMaster.format("%d %s %s %.2f\n",
            account.getAccount(), account.getFirstName(), account.getLastName(),
            account.getBalance());
            transaction.setAccount(inTransaction.nextInt());     // read account number
            transaction.setAmount(inTransaction.nextDouble());   // read amount
        else if (transaction.getAccount() != account.getAccount())
          outNewMaster.format("%d %s %s %.2f\n",
          account.getAccount(), account.getFirstName(), account.getLastName(),
          account.getBalance());
          theLog.format("%s%d","Unmatched transaction record for account number ",transaction.getAccount());
      } // end while
      System.out.println("Finish file matching.");
    } // end try
    catch (NoSuchElementException elementException)
      System.err.println("File improperly formed.");
      inTransaction.close();
      inOldMaster.close();
      System.exit(1);
    } // end catch
    catch (IllegalStateException stateException)
      System.err.println("Error reading from file.");
      System.exit(1);
    } // end catch
} // end method updateRecords
// close file and terminate application
public void closeTransFile()
    if (inTransaction != null)
      inTransaction.close();
} // end method closeTransFile
// close file and terminate application
public void closeOldMastFile()
    if (inOldMaster != null)
      inOldMaster.close();
} // end method closeOldMastFile
// close file
public void closeNewMastFile()
    if (outNewMaster != null)
      outNewMaster.close();
} // end method closeNewMastFile
// close file
public void closeLogFile()
    if (theLog != null)
      theLog.close();
} // end method closeLogFile
} // end class FileMatch-------------------------------------------------------------------------------------------------
// Exercise 14.8: FileMatchTest.java
// Testing class FileMatch
public class FileMatchTest
   // main method begins program execution
   public static void main( String args[] )
     FileMatch application = new FileMatch();
     application.openTransFile();
     application.openOldMastFile();
     application.openNewMastFile();
     application.openLogFile();
     application.updateRecords();
     application.closeLogFile();
     application.closeNewMastFile();
     application.closeOldMastFile();
     application.closeTransFile();
   } // end main
} // end class FileMatchTest-------------------------------------------------------------------------------------------------
Sample data for master file:
Master file
Account Number            Name                     Balance
100                            Alan Jones                   348.17
300                            Mary Smith                    27.19
500                            Sam Sharp                   0.00
700                            Suzy Green                   -14.22Sample data for transaction file:
Transaction file                    Transaction
Account Number                  Amount
100                                         27.14
300                                         62.11
300                                         83.89
400                                         100.56
700                                         80.78
700                                         1.53
900                                         82.17 -------------------------------------------------------------------------------------------------
My FileMatch class program above has bugs in it.
The correct results for the newmast.txt:
100 Alan Jones 375.31
300 Mary Smith 173.19
500 Sam Sharp 0.00
700 Suzy Green 68.09The correct results for the log.txt:
Unmatched transaction record for account number 400Unmatched transaction record for account number 900------------------------------------------------------------------------------------------------
My results for the newmast.txt:
100 Alan Jones 375.31
300 Mary Smith 111.08
500 Sam Sharp 0.00
700 Suzy Green -12.69My results for the log.txt
Unmatched transaction record for account number 700-------------------------------------------------------------------------------------------------
I am not sure what is wrong with my code above to make my results different from the correct results.
Much help is appreciated. Please help.

From the output, it looks like one problem is just formatting -- apparently you're including a newline in log entries and not using tabs for the newmast output file.
As to why the numbers are off -- just from glancing over it, it appears that the problem is when you add multiple transaction values. Since account.combine() is so simple, I suspect that you're either adding creating transaction objects incorrectly or not creating them when you should be.
Create test input data that isolates a single case of this (e.g., just the Mary Smith case), and then running your program in a debugger or adding debugging code to the add/combine method, so you can see what's happening in detail.
Also I'd recommend reconsidering your design. It's a red flag if a class has a name with "Create" in it. Classes represent bundles of independant state and transformations on that state, not things to do.

Need help with connecting file inputs to arrays

In this assignment I have a program that will do the following: display a list of names inputed by the user in reverse order, display any names that begin with M or m, and display any names with 5 or more letters. This is all done with arrays.
That was the fun part. The next part requires me to take the names from a Notepad file, them through the arrays and then output them to a second Notepad file.
Here is the original program: (view in full screen so that the code doesn't get jumbled)
import java.io.*;       //Imports the Java library
class progB                    //Defines class
    public static void main (String[] arguments) throws IOException
        BufferedReader keyboard;                                  //<-
        InputStreamReader reader;                                 // Allows the program to
        reader = new InputStreamReader (System.in);               // read the the keyboard
        keyboard = new BufferedReader (reader);                  //<-
        String name;                 //Assigns the name variable which will be parsed into...
        int newnames;               //...the integer variable for the amount of names.
        int order = 0;              //The integer variable that will be used to set the array size
        String[] array;             //Dynamic array (empty)
        System.out.println (" How many names do you want to input?");   //This will get the number that will later define the array
        name = keyboard.readLine ();
        newnames = Integer.parseInt (name);                                         // Converts the String into the Integer variable
        array = new String [newnames];                                               //This defines the size of the array
        DataInput Imp = new DataInputStream (System.in);       //Allows data to be input into the array
        String temp;
        int length;                                                                  //Defines the length of the array for a loop later on
            for (order = 0 ; order < newnames ; order++)                                //<-
            {                                                                           // Takes the inputed names and
                System.out.println (" Please input name ");                            // gives them a number according to
                temp = keyboard.readLine ();                                           // the order they were inputed in
                array [order] = temp;                                                  //<-
            for (order = newnames - 1 ; order >= 0 ; order--)                                //<-
            {                                                                                // Outputs the names in the reverse
                System.out.print (" \n ");                                                   // order that they were inputed
                System.out.println (" Name " + order + " is " + array [order]);             //<-
            for (order = 0 ; order < newnames ; order++)                                  //<-
                if (array [order].startsWith ("M") || array [order].startsWith ("m"))     // Finds and outputs any and all
                {                                                                         // names that begin with M or m
                    System.out.print (" \n ");                                            //
                    System.out.println (array [order] + (" starts with M or m"));         //
                }                                                                         //<-
            for (order = 0 ; order < newnames ; order++)                                            //<-
                length = array [order].length ();                                                   //
                if (length >= 5)                                                                    // Finds and outputs names
                {                                                                                  // with 5 or more letters
                    System.out.print (" \n ");                                                      //
                    System.out.println ("Name " + array [order] + " have 5 or more letters ");      //<-
}The notepad file contains the following names:
jim
laruie
tim
timothy
manny
joseph
matty
amanda
I have tried various methods but the one thing that really gets me is the fact that i can't find a way to connect the names to the arrays. Opening the file with FileInputStream is easy enough but using the names and then outputing them is quite hard. (unless i'm thinking too hard and there really is a simple method)

By "connect", do you just mean you want to put the names into an array?
array[0] = "jim"
array[1] = "laruie"
and so on?
That shouldn't be difficult at all, provided you know how to open a file for reading, and how to read a line of text from it. You can just read the line of text, put it in the array position you want, until the file is exhausted. Then open a file for writing, loop through the array, and write a line.
What part of all that do you need help with?

Need help with Outlook 2013 connecting to Exchange server(2010)

Hi
I need help with Outlook 2013 and with my exchange server(2010) email account
After setting up account initially emails come in and than after an hour or two stop. My OWA is working fine with no issues. I have even created a forward rule in OWA to my GMAIL account whch works fine
However Outlook 2013 is not syncing messages, have difficulty in sending emails sometimes as it takes too long. In fact the connection also is intermittent. Even if the task bar shows connected to exchange, it seems that is not the case since new emails
and any emails I compose dont work. I have trouble shot the issue with my ISP and email service provide, but they havent resolved the issue I have also done a TraceRoute and that shows no drops or problems to he exchange server.
Can someone please help me resolve this matter so I can continue to use Outlook 2013( running Windows 8.1) in both my computers which have the identical problem
Look forward to a solution soon
Thanks

Hi Angela
Thanks for your message
To answer your questions, please note the following
a) My account is set up in Cache Mode( not online mode)
b) I am the only other user on the account
c) When the connection to the exchange server is broken, I see upon clicking connection tab that there is no information in the box, and when I press reconnect it starts showing "connecting"
d) When the connection to the server is there, it shows connection as "established"
e) Sorry I dont understand th meaning of CAS array in your environment? Can you pls explain
Since yday I have been using Outlook 2010 on desktop and Outlook 2013 on my laptop using Exchange 2013 account. So far all emails are syncing, and I can send emails from both computers. However, I am concerned that the connection can break-off anytime,
as it has done that in the past on both outlook versions. The max time it has worked without any problem is 48 hrs and than after that the same issue of not connection, not syncing and unable to send emails happens
My ISP has checked and there is no network connectivity issues. My email service provider has trouble shot the issue many times, but to no positive results. I have also changed the profile a few times, but the intermittent connectivity problem hasn't
been resolved.
Can you identify the possible causes and more importantly a working permanent solution please
Thanks
Mahesh

Need help for writing extract program

hi
i need help for writing extract program to retriew data from legacy system.
i already developed bdc programs for me31k and me21.
my requirement is to write extract program s for those t.codes.
to retriew data from legacy system and stored in flat file.

i need help with a java program. it is a program that allows the user to enter a student's GPA, number of extracurricular activities, and number of service activities. The user can not enter a gpa above 4.0 or below 0. The user can not enter a negative number for the number of both activities. If the student meets the following criteria: 1) GPA of 3.8 or above and at least one extracurricular activity and one service activity, 2) GPA below 3.8 but at least 3.4 and a total of at least three extracurricular and service activities, 3) GPA below 3.4 but at least 3.0 and at least two extracurricular activities and three service activities, the message "Scholarship candidate" should display. If the student does not meet the criteria above, then the message"not a candidate" should display. Can you help me, please?
You haven't posted ANY 'java program' for us to help with.
The forum is NOT a coding service. It is to help you with YOUR code.
Post the code you have written and SHOW us (don't just tell us) how you compile it and execute it and the results you get. Then we can help you with any problems you are are having.
If you need help understanding just what the program should be doing you need to ask your instructor to clarify the assignment.

Need help with generics

I have written a java program using jdk1.5. After completing my program I noticed that the compiler was outputting a warning. It tells me that there were a few unsafe operations in my code. Anyway I found out that my code needed to include generics. I was able to figure out how too include some of the generics. I am having trouble with the following:
[javac] /home/paul/Documents/java/PersonalInfo/src/personalInfo/logic/DB.java:105: warning: [unchecked] unchecked conversion
[javac] found : personalInfo.logic.FNComparator
[javac] required: java.util.Comparator<? super java.lang.Object>
[javac] Arrays.sort(sort, fn);
[javac] ^
[javac] /home/paul/Documents/java/PersonalInfo/src/personalInfo/logic/DB.java:105: warning: [unchecked] unchecked method invocation: <T>sort(T[],java.util.Comparator<? super T>) in java.util.Arrays is applied to (java.lang.Object[],personalInfo.logic.FNComparator)
[javac] Arrays.sort(sort, fn);
[javac] ^
[javac] /home/paul/Documents/java/PersonalInfo/src/personalInfo/logic/DB.java:109: warning: [unchecked] unchecked conversion
[javac] found : personalInfo.logic.LNComparator
[javac] required: java.util.Comparator<? super java.lang.Object>
[javac] Arrays.sort(sort, ln);
[javac] ^
[javac] /home/paul/Documents/java/PersonalInfo/src/personalInfo/logic/DB.java:109: warning: [unchecked] unchecked method invocation: <T>sort(T[],java.util.Comparator<? super T>) in java.util.Arrays is applied to (java.lang.Object[],personalInfo.logic.LNComparator)
[javac] Arrays.sort(sort, ln);
[javac] ^
The FN/LNComparator class implements the java.util.Comparator class. I have looked at the generics tutorial on the java.sun.com website. I can't figure out what I replace the <T> with to make the code compile and the warning to go away. I have tried <Comparator> but that just gives me an error that says FNComparator does not take any parameters.
If anyone knows how to fix these warnings let me know
-Hockeyfan

I know how to fix it.
Step 1. Stop writing subject-lines like "Need help with generics". Everyone who starts a topic needs help, that's why people post here!
Step 2. Don't just post the error message, post the relevant code. In [code ][code ] tags of course.
Step 3. Stop watching hockey, it'll stunt your growth
Step 4. Have the FN/LNComparator implement, not the raw Comparator, but Comparator<Object>

Need help with writing a rule

Similar Messages

Maybe you are looking for