Need help with Z10 getting Internet

Summary: I bought BB Z10 in Indonesia and they said it was unlocked for Europe.
OS release 10.1.0.273 installed last week after replacing factory settings. SiM card is newly purchased at Tele 2 and internet works well in my other BB (BOLD) but not in Z10.
The PIN code 0000 is taken off so I boot the Z10 without a PIN.
With other SIM (other provider) in Z10 everything works properly.
All institutions for internet on Z10 are correct, just do not have 4G.
Have also APN internet.tele2.nl completed and authentication type to PAP. Tele2 geeft aan dat gebruikersnaam en wachtwoord niet nodig zijn. Then it comes: .... "save" does not work because then the fields are empty again.
Customer service indicates that it is not because of Tele2 SIM coz it works in other BB..
So, who has similar experience and know possible solution?

The most current iOS version is 8.1.3.
It is a iPad Air (WiFi only). You need a WiFi connection for internet.
Settings > WiFI > Select your network & enter the password for the network

Similar Messages

Need Help with Laptops and Internet Access

I have been having difficulties during the past week with my internet access. I had been using FIOS for a couple months with few problems. Initially, I thought the problem was related to thunderstorms that passed thru our area a week ago, and wondered if the router had been damaged during the storms. But now I suspect it may be a more pedestrian issue with the computers' settings.
I have the Actiontec M1424WR router. With the power on, the power, internet, coax, and wireless lights are glowing and green. I have tried rebooting the router, and have used the various "fix my connection" and optimizer tools available from online support here.
We have 4 PCs in the home, all with wireless adapters. Two are desktop PCs, the other two are an HP (XP) and a Dell (Vista) laptop. I am generally able to get internet access on the desktop PCs, since these have linksys wireless adapters with the linksys utilitiy installed, and I have a profile created in the linksys utility that usually works fine with the desktop units.
But there is no such utility for the laptop units with their built-in adapters, and I must use Windows services to connect to the network and the internet. I can sometimes find available networks with the Windows services, and connect to the network manually. But many times, the SSID for our network will not be listed as avaialble, and at other times, the Windows service says that I have a network connection, but it will not connect to the Internet. And even when connections are made, they will intermittently be dropped.
Is there anything I can do to make the network and internet access for these laptops once again reliable?
Thanks,
Rich
Solved!
Go to Solution.

Here is the possible scenario:
Your router was configured correctly, and all was working well.
Thunderstorms knocked out power, and your router reverted to it's original setting ("automatic channel selection").
Now you have intermittent connectivity due to the change in configuration.
When you go into your router to change the channel, check to see if there is an option to "keep current channel settings after power cycle". If so, check that box.
Brian K
Verizon Telecom
Fiber Solution Center
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

Need help with setting up Internet sharing to PS3

Hey, so I am trying to use my Macbook as a wired router to my PS3 (My Macbook is on my wireless Linksys router and I have the cable needed to create a wired connection from my Macbook to my PS3. I had this setup working once before after getting a specific set of numbers from a google search but can't seem to find that page anymore. I've only been able to find threads on creating a wireless connection. So here is my problem. From system prefs, I am entering into my PS3 all the numbers my Macbook is giving me from system prefs (my IP address, default router, subnet mask, and DNS servers). But ever time I run an internet connection test I get DNS Error 80710102. If someone could help me it would be greatly appreciated.

Really?? I know this problem was solved before on the Apple message boards but I've been searching for it for quite some time and have yet to find that thread. Can someone help me with this??

Need help with the Get Specified Servers action..

Hello,
Here is a workflow I have made (saved as a Finder plug-in):
1. Get specified servers --- afp://Sean:[email protected]/Sean
2. Connect to servers
3. Get selected finder items
4. Move finder items (to: desktop)
5. Eject disk
This workflow allows me to right-click on a file on my MacBook and move it to my iMac (it mounts the imac share, connects to it, transfers the file, then unmounts the share). It works perfect for me but I have one annoyance with it - the password part.. I would like your guys help in removing that bit.
I don't want my Mac to have a password, but I had to make one just for that step to work properly. Can anyone help me out here? I don't know much about server/URL stuff so any improvements that can be made there would be helfpul.
Thanks

Well, I could be wrong, but I don't believe you will be able to avoid using a password as it is a key element in security measures of the operating system.
As you found out even if you set up an account with no password and save off the keychain the OS still issues a dialog asking for a password for mounting the shared volume. In that case all you do is hit the "Connect" button and this could be automated in various ways (some listed below).
Setting up this method, while not really recommended, would still provide the facade of a secure system by challenging any other potential users to enter a password and reduce the number of keystrokes you need to enter.
Use AppleScript/Automator
tell application "System Events" to key code 36 -- return key
which could be placed in an Automator "Run AppleScript" action and saved off as a Finder plug-in contextual menu or an application/workflow.
Use Third-party Keyboard Shortcut apps
The AppleScript/Automator workflow could also be attached to a keyboard shortcut using one of the various third party apps that provide that functionality.
Some of those third party apps also give you the capability to send a keycode directly and have that attached to a keyboard shortcut.
RECOMMENDATION
Retain the password account with the user account info saved in the keychain. This can avoid the password dialog for server mounting and if automated, as described below, any situations in which the dialog can not be avoided.
The previously mentioned automation methods can easily be set up to actually enter your full password and hit the Connect/OK button so that you get complete security as long as someone else doesn't find out about the contextual menu or keyboard shortcut. It's as simple as adding another line or two to the AppleScript:
tell application "System Events"
keystroke "yourfullpassword"
delay 2
key code 36 -- return key
end tell

Need help with z10

My BlackBerry z10 only working now over wifi. The 3g is not capital
I have checked with Stc they told me my service is working ok
Any one have any idea.

Hello alsagier and welcome to the BlackBerry Support Community Forums.
Sorry to hear you're having an issue with your Browsing.
It sounds like your data plan is not active if you are not getting the 3G in capital and cannot Browse without being connected to Wi-Fi.
If you could send me a private message with your PIN I can investigate further for you.
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Need help with coding: getting an error

Hi there everyone, this would be my first post here, and my first post on any forum related to programming. Im taking a highschool computer science course, in which we are learning J2SE. I have read ahead a bit, and am having trouble with the following program:
//=============================================================================
//Converts US Dollars To Euros
//=============================================================================
public class currencyconverter1
     private Double dollarRate = 1.00000;
     private Double conversionRate = 1.22990;
     private Double dollarAmount = 0.0;
     private Double euroAmount = 0.0;
          public static void main convert Double(euroAmount)
               dollarAmount = euroAmount*conversionRate;
               System.out.println(dollarAmount);
               return euroAmount
               }JCreator is telling me I need a '(' on the "main" line. I simply cannot find where this is needed. Can anyone help, or recommend another forum where I may find some help? Thanks in advance!

Thanks for the reply... I tested out your code, and it didn't compile, so after playing with it, heres what I got to compile (please read past the code):
public class currencyconverter1
     private Double dollarRate = 1.00000;
     private Double conversionRate = 1.22990;
     private Double dollarAmount = 0.0;
     private Double euroAmount = 0.0;
     public Double convert (Double euroAmount)
          dollarAmount = euroAmount * conversionRate;
          System.out.println(dollarAmount);
          return euroAmount;
}It gives me the following message when I execute the .exe: "Exception in thread "main" Java.Lang.NoSuchMethodError: Main" ....
Does anyone know what the deal is and can explain wnat my source code error is? Thanks again in advance.

HT1338 Need help with iphoto/get this messageShut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys

I lost my iphoto in snow lepard. How do I get it back?

Have you tried rebuilding as the message suggests? Otherwise you need to remember that we can't see your machine and so haven't a clue what you're asking.

Need help with the get url feture

i can't get a html file from the web into flash if some one
could help me that would be nice

You can't get an html file "into" Flash. Are you talking
about opening an html document (website) from a button within
Flash? The action script is (place this on the button symbol)
on(release){
getURL("
http://www.someWebsite.com","_blank");
}

Need help with error getting licence ...

I purchased Battlestations: Midway prima guide back in Feb 2010 from Direct2drive.com. Recently purchased a new computer, when I reinstalled the prima guide & reinstalled adobe digital editions. I received this error message: error getting license license server communication problem
E_LIC_ALREADY_FULFILLED_BY_ANOTHER_USER

Hi Try this, i was having the same problem and doing the following worked for me" i cant take the credit i found this in another forum posted by MIKEFILA, but i know what you going thru was so stressed.
I just read someone's suggestion to access Parental Controls under Preferences. Choose to disable the Store and then iTunes U. Update and then voila! The iTunes U appears; even though you just "disabled" it. Next go back into Preferences/Parental Controls and "re-enable" the Store... Good Luck!

No support for pse4, need help with help and everything else.What's a layer? How can I get help PDF from CD? I don't have a clue how to use this. I have a Macbook pro.

Need help with help pse4 not supported by adobe. how to do topics not available and I have never used any thing like this. Help says there is a download but have not been able to get it. What's a rookie to do ? Is there somewhere I can go to find out how to use PSE4?

The internet is overflowing with tutorials on PSE. Just google what you want and include Photoshop Elements 4 as part of your search term, or go to the library and they may have several different books on PSE 4. For PSE 4, you won't find a mac specific book, but that doesn't matter because the editor is the same on either program. Just substitute Command for Ctrl and Option for Alt in the keystrokes, and ignore anything about the organizer.
Some popular sites for learning elements:
http://www.photoshopelementsuser.com/
lynda.com
eclecticacademy.com
youtube has a lot of video tutorials, too.

I need help with fp, i cannot get it to work. have tried everything

i cannot get fp to work. I have uninstalled and installed so many times. I use IE9....it worked two months ago.

thank you for your reply. I am using Internet Exp. 9 and McAfee software. It states it installs and when I open a video, receive message I need to upgrade. I followed the directions for 32 bit vs 64 bit. Adobe FP is under my programs????
> Date: Thu, 8 Sep 2011 05:17:21 -0600
From: [email protected]
To: [email protected]
Subject: I need help with fp, i cannot get it to work. have tried everything
It won't work or just won't install?
Which OS, browser(s), and anti-virus software are you using?
If you're using the free Avira AntiVir(us) Personal software, then deactive the Webguard feature first before installing the Flash Player.
>

HT1329 hi i need help with my ipod nano i want to get my music from my ipod to i tunes so that i can be able to transfer the music on my i tunes to my ipad mini can you help me with that ?

hi i need help with my ipod nano i want to transfer my music from the ipod to the itunes so that i can be able to transfer the music to my ipad can you help me with that ?

You cannot use iTunes to transfer song files from iPod to computer, except for songs purchased from the iTunes Store. However, there are third-party methods and utilities that can transfer from iPod to computer. If you do an Internet search on something like"iPod transfer," you should get some links. (The CNET article seems to be popular.)
Once the song files are on your computer's drive, you can add them to your iTunes library, and then sync your iPad.

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well...

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well...

Hi, I have this green mark (with pointing arrow looks like a link) on some words show on my window screen when I open a web page, I wonder if it is a virus link or such. Need help how to get rid of it. Thanks

Hi, I have this green mark (with pointing arrow looks like a link) on some words show on my window screen when I open a web page, I wonder if it is a virus link or such. Need help how to get rid of it. Here's the example:
WING
GAMES
MAJORITY
Thanks

If the third link you posted (the link containing the word "majority") does not look like the following then you inadvertently installed adware.
That particular page should resemble the following:
The word "majority" in the third paragraph should not be a link and should not have the green icon associated with it.
To learn how this may have occurred, and how to prevent it from occurring in the future, read How to install adware
Most so-called "news" websites are nothing more than entertainment outlets that cater to prurient interests, and contain advertisements that leave the user about three clicks away from installing junk. If you decide to frequent those websites, Safari's "Reader" feature helps minimize that exposure.
Try it:

Need help with Z10 getting Internet

Similar Messages

Maybe you are looking for