NEED HELP WITH ZEN VISION M PLEASE HE

i'v recently brought the new creative zen vision M in pink and i think its broken! i charged it on my computer and loaded songs with no problems and used it on holiday for a while untill the battery ran out. i tried to charge it on my speakers (which say that they charge mp3 players) but this wouldnt work, iv also tried charging it on my computer now im home but it wont even connect let alone charge! all that happens when i plug it into my usb on my computer is the on switch flashes blue, the screen is blank though and the low battery sign doesnt even show!
i'v tried resetting it but it still wont work. i really dont know what to do as iv tried everything i can to sort it out
if anyone could offer any help id really apprieciate it as i paid alot of money for it n really want it to work!
thanks
jessica brewer

Looks like you might have to return it if it isn't responding to charging and the reset option. Is it under the 30 days return policy?
OR you could have an RMA so that Creative fixes it and then returns it to you. Here is most of the info:
http://us.creative.com/support/warranty/
Hoped that helped a little, and good luck.

Similar Messages

Need help with threads?.. please check my approach!!

Hello frnds,
I am trying to write a program.. who monitors my external tool.. please check my way of doing it.. as whenever i write programs having thread.. i end up goosy.. :(
first let me tell.. what I want from program.. I have to start an external tool.. on separate thread.. (as it takes some time).. then it takes some arguments(3 arguments).. from file.. so i read the file.. and have to run tool.. continously.. until there are arguments left.. in file.. or.. user has stopped it by pressing STOP button..
I have to put a marker in file too.. so that.. if program started again.. file is read from marker postion.. !!
Hope I make clear.. what am trying to do!!
My approach is like..
1. Have two buttons.. START and STOP on Frame..
START--> pressed
2. check marker("$" sign.. placed in beginning of file during start).. on file..
     read File from marker.. got 3 arg.. pass it to tool.. and run it.. (on separate thread).. put marker.. (for next reading)
     Step 2.. continously..
3. STOP--> pressed
     until last thread.. stops.. keep running the tool.. and when last thread stops.. stop reading any more arguments..
Question is:
1. Should i read file again and again.. ?.. or read it once after "$" sign.. store data in array.. and once stopped pressed.. read file again.. and put marker ("$" sign) at last read line..
2. how should i know when my thread has stopped.. so I start tool again??.. am totally confused.. !!
please modify my approach.. if u find anything odd..
Thanks a lot in advance
gervini

Hello,
I have no experience with threads or with having more than run "program" in a single java file. All my java files have the same structure. This master.java looks something like this:
---master.java---------------------------------------------------
import java.sql.*;
import...
public class Master {
public static void main(String args []) throws SQLException, IOException {
//create connection pool here
while (true) { // start loop here (each loop takes about five minutes)
// set values of variables
// select a slave process to run (from a list of slave programs)
execute selected slave program
// check for loop exit value
} // end while loop
System.out.println("Program Complete");
} catch (Exception e) {
System.out.println("Error: " + e);
} finally {
if (rSet1 != null)
try { rSet1.close(); } catch( SQLException ignore ) { /* ignored */ }
connection.close();
-------end master.java--------------------------------------------------------
This master.java program will run continuously for days or weeks, each time through the loop starting another slave process which runs for five minutes to up to an hour, which means there may be ten to twenty of these slave processes running simultaneously.
I believe threads is the best way to do this, but I don't know where to locate these slave programs: either inside the master.java program or separate slave.java files? I will need help with either method.
Your help is greatly appreciated. Thank you.
Logan

Need help with flash player installation please !!!!

Hello,
I need help with my flash player installation because every time I access a movie this is the message I receive.
This content on Xfinity TV is not available for viewing with Chrome's "Incognito" mode. To play this video using Chrome, please view this page without "Incognito" mode.
Still having problems? Try resetting your Flash player license.

Incognito mode is a Google Chrome setting when you open a new window (Cmd+Shift+N on a Mac Ctrl+Shift+N on Windows) It opens a "private" window with no cookies and no tracking. The problem with it is that when you disable cookies, your license files are not sent to the site (whetehr it's YouTube or xFinity or any other that uses license files for paid content) and it treats you as if you're a first time visitor. Paid videos won't play wihtout the cookies sending the license file info.
This isn't a Flash Player setting. It's in Chrome. I did some research and according to Google, "Incignito" mode is off by default, and can ONLY be activate by the keyboard shortcut. There IS a way to disable it from the registry http://dev.chromium.org/administrators/policy-list-3#IncognitoModeAvailability

I need help with printing labels. please

I need help with printing labels. thanks in advance

Welcome to Apple Support Communities.
In Address Book, first select a name or group of names to print.
Then File, Print, select Style, Mailing Labels, then Layout to select a specific target label (such as an Avery number), or define your own...

Help With Zen Vision:M 30G, lost alot of music, "rebuilding" progress bar doesnt fin

I purchased my Zen Vision:M 30GB player about 5 months ago and its been great untill today I turned it on and it froze, so i hit the reset button.
Heres the thingI reset it and that "Rebuilding" progress bar poped up like it has in the past when i hit reset?But this time the progress bar only got about? /6th of the way full, before the unit returned to its normal menu, and i went to look at my music and about 90% of it is gone! Ive done a restart in the past and the rebuilding progress bar would have to fill up all the way before it would go to the normal menu and i had no problems with it then, just today it started doing the thing where it would only go /6th the way. Heres the weird stuff,I went to look at the system information to look how much memory was left and based on the numbers, my 90% of missing music should still be on there somewhere. I tried connecting it to my computer and all the sudden now my computer decides to recognize it but The Creative Media Explorer will say its not connected, that is a first for me too?I tried doing that system recovery thing, where i did the scan disk but that did not help at all. Everytime i try to re-boot or re-start it does that thing where the "Rebuilding" progress bar only goes /6th of the way before it goes back to the normal menu, i think that has somthing to do with it. Any help would be GREATLY appreciated?Message Edited by Lowalkoroc on 03-7-20070:20 PM
Message Edited by Lowalkoroc on 03-7-20070:20 PM

I was just about to post a topic about this. I had the same problem and after numerous efforts I decided to follow the "Format (All)" instructions [url="http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=5530#M5530">here[/url]. After a reformat, a reboot, and a reload of all my songs everything is working again. Thank the Lord and the Creative forums.

Need Help with Migration...Please

Hello,
I need help! I just bought a new MacBook Pro. In house, I have a two year old iMac running Mavericks (all updated) and an iPhone and iPad (both running the most current OS). I also have the iMac connected to a Time Capsule. Here are my questions:
1. As I am not replacing the iMac, but rather adding a MacBook Pro to the mix, should I migrate the software, settings, files, etc. from the iMac to the MacBook? Is there an issue running computers which are clones in the same environment? Is it a bad idea to migrate?
2. Assuming # 1 is okay to migrate, what is the best way? Is it best directly from the iMac or from the Time Capsule? I do have a Thunderbolt to Ethernet adapter on hand.
3. Is there a link that would help me navigate the migration?
4. How long should the migration in #2 take?
5. Will I need to change any settings on the iMac, iPhone, or iPad afterwards?
6. Will my contacts and calendar sync with iCloud automatically, or do I have to change a setting on the MacBook to make that happen?
7. Also, as I'm leaving town tomorrow and want to take the MacBook Pro with me and I'm unsure I've the time to Migrate and tweak, can I jus turn on the MacBook (still not turned on), use it as it is, and then migrate when I get back home?
Any help would greatly be appreciated. Thank you!

Hello,
I need help! I just bought a new MacBook Pro. In house, I have a two year old iMac running Mavericks (all updated) and an iPhone and iPad (both running the most current OS). I also have the iMac connected to a Time Capsule. Here are my questions:
1. As I am not replacing the iMac, but rather adding a MacBook Pro to the mix, should I migrate the software, settings, files, etc. from the iMac to the MacBook? Is there an issue running computers which are clones in the same environment? Is it a bad idea to migrate?
2. Assuming # 1 is okay to migrate, what is the best way? Is it best directly from the iMac or from the Time Capsule? I do have a Thunderbolt to Ethernet adapter on hand.
3. Is there a link that would help me navigate the migration?
4. How long should the migration in #2 take?
5. Will I need to change any settings on the iMac, iPhone, or iPad afterwards?
6. Will my contacts and calendar sync with iCloud automatically, or do I have to change a setting on the MacBook to make that happen?
7. Also, as I'm leaving town tomorrow and want to take the MacBook Pro with me and I'm unsure I've the time to Migrate and tweak, can I jus turn on the MacBook (still not turned on), use it as it is, and then migrate when I get back home?
Any help would greatly be appreciated. Thank you!

Need Help with new site glitches PLEASE!!!

I need help trouble shooting a website. The site is
www.farrowandwatkins.com. Nav buttons on Mac they display correctly
which is aligned at top and bottom of content to left on Home page.
However, when viewed on PC, the buttons spread to fill the
distance of the "Patients" Page. All the pages spread to this
length also, but are not suppose to.
Nav buttons have padding of 10 on bottom, except last one.
Please help if you can

First guess would be that there doesn't seem to be a fixed
height or width on the cell for the 'patients' button.

I need help with the https class please.

Hello, i need add an authentication field in my GET request using HTTPS to authenticate users. I put the authentication field using the setRequestProperty method, but it doesn't appear when i print all properties using the getRequestProperties method. I wrote the following code:
try{
URL url = new URL ("https://my_url..");
URLConnection conexion;
conexion = url.openConnection();
conexion.setRequestProperty("Authorization",my_urlEncoder_string);
conexion.setRequestProperty("Host",my_loginServer);
HttpsURLConnection httpsConexion = (HttpsURLConnection) conexion;
httpsConexion.setRequestMethod("GET");
System.out.println("All properties\r\n: " + httpsConexion.getRequestProperties());
}catch ....
when i run the program it show the following text:
All properties: {Host=[my_loginServer]}
Only the Host field is added to my HttpsURLConnection. The authentication field doesnt appear in standar output. How can i add to my HttpsURLConnection an Authentication field?
thanks

I have moved this to the main Dreamweaver forum, as the other forum is intended to deal with the Getting Started video tutorial.
The best way to get help with layout problems is to upload the files to a website and post the URL in the forum. Someone can then look at the code, and identify the problem. Judging from your description, it sounds as though the Document window is narrow, which would result in the final menu tab dropping down to the next row. Try turning on Live view or previewing the page in a browser. Design view gives only an approximate idea of the final layout. Live view renders the page as it should look in a browser.

I need help with my wifi sync, please?

I am trying to sync a single band from my laptop to my iPhone. This is my new laptop and I have no transfered all my music from my old computer onto here, so I can not sync through the cable or else I will have to remove all my exsisting information on my phone, I do not have all my music on my laptop yet. All I want is to simply transfer a few songs from my iTunes to my phone wirelessly and I can't. I enabled the button when I plug in my phone that tells me I can sync wirelessly but when I disconnect it refuses to work. Please I need help.

Dear friend, by the moment Blackberry playbook is just for USA/Canada users, in a very short time RIM will announce the release of the product for the rest of countries.
Be patient when you can use it at 100%, you will be amazed!

I just bought my MacBook Pro 13" and I tried to install an anti virus but then it went into a grey folder with a question mark I need help with restoring the iOS please

I need help taking out the grey folder with the question mark and I've try everything except the CD thing because my MacBook didn't come with one so I really need help please

What anti-virus software did you install? Although there's a lot of bad anti-virus software out there, no anti-virus software should cause such a problem. A gray screen with a flashing question mark on a folder means that no bootable system could be found, which means that the system was badly damaged or corrupt. Even installing bad software would not normally cause that, so either there was something badly wrong with the system already or the anti-virus software you tried to install was really, really bad!
As mende1 says, you need to reinstall the system at this point. After your system is back up and running, read my Mac Malware Guide. If, after reading that, you want anti-virus software, use one of the programms recommended in that guide.

I need help with the navigation menu please?

I have been working my way through your six part printed instructions and I am styling the header and navigation menu. The bullet points disappeared which was correct and the tabs moved to the right, as they should, but one tab sits underneath another tab and all tabs are covered up by my main heading. This is dreamweaver CS6.
It looks a bit of a mess!

I have moved this to the main Dreamweaver forum, as the other forum is intended to deal with the Getting Started video tutorial.
The best way to get help with layout problems is to upload the files to a website and post the URL in the forum. Someone can then look at the code, and identify the problem. Judging from your description, it sounds as though the Document window is narrow, which would result in the final menu tab dropping down to the next row. Try turning on Live view or previewing the page in a browser. Design view gives only an approximate idea of the final layout. Live view renders the page as it should look in a browser.

I need help with website can you please

Need help
Message was edited by: Liam Dilley - Phone number in here is a bad idea

Hi,
I removed your phone number as you will just get cold called
BC support does not call you for help and people here can help you here. Just saying "need help" is not much use though, we need to know what kind of help you need.

Help with Zen Vision M 30GB. Won't turn on. Blinking lig

I have a Zen Vision M 30 GB mp3 player that i've had for about 4 months. it has been making realy loud scratching noises for about 3 months and usually loads pretty slows. which is wierd cause i only have about 2,000 songs on there and a couple of videos and pictures.
Today when i tried to charge it and transfer music to my new comp it wouldn't recognize it. When i disconnected my zen from my computer i tried to turn it on and nothing happend. when i hold the switch to the side, the little blue light blinks. I've sent a similar mp3 player back to creative because of a cracked screen and it took a month to get it back. any advice on what i should do to fix it's

I have had my zen vision m for nearly a year, and got the same problem as you just in the last week-it refused to turn on or show any sign of life...except the blue light flickers now and then when I decide to try AGAIN to see if it ll turn on this time. I came on this forum,? charged it from loads of different usb ports, looked at the knowledge base, downloaded and tried to run the firmware, even pushed the reset button...tried eveything that was suggested basically, but still nothing. So I called a representati've...and they say nothing doing, so I have to put it in for RMA or a replacement now.....just hoping my warranty hasnt run out. Try all the things mentioned above, and if nothing works, call them up. Sorry!

Dummy needs help with zen mi

I recently purchased a new laptop with widows vista and I had had xp before. My computer tells me that the driver is not supported or rather that the driver is not found. Know i've been searching around for info and i saw that there are many posts on this subject, however most of the post are way to advance for me to understand.. can anybody please explain to me in Dummy language how to get my zen micro to work with the windows vista pleeease and be patient with me im way to dumb for any big computer talk lol thanks for anyone who might help me.

Hi, the answer may not be as simple as you would like ...
Vista needs the Zen (insert older model) to have its firmware changed to Version 2.x which is referred to as MTP or media transfer protocol. If you do this it is a one way change meaning you cannot go back. That could be good or bad depending on a number of things but for simplicity, let's say you only have a Vista computer. You will need to go to MTP firmware. The catch is that you can only do that under a computer running Windows 2K or XP.
So ... find someone with a 2K or XP computer with an open USB port. Browse to Creative.com's download section adn download the Zen drivers (these install onto the computer so that the computer can recognize the Zen Micro), and download the latest ver 2.x firmware for the Micro. Install the drivers and reboot. Then upon restarting plug in the Micro and let Windows do its thing about finding new hardware. Once that is done and OK, run the firmware installer. During this time, do nothing to the computer or the Zen. If the process interrupts you could end up needing to send the player back for a repair.
Let the firmware install and when completed unplug from that computer and go over to your Vista computer. Plug in and you should be able to manage the Zen from Windows Media Player. Or install Creative Media Source 5 and its plug in modules and you will be up and running.
Good luck!!
jake

New to Java and need help with this program..please!

I'd really appreciate any helpful comments about this program assignment that I have to turn in a week from Friday. I'm taking a class one night a week and completely new to Java. I'd ask my professor for help, but we can't call him during the week and he never answers e-mails. He didn't tell us how to call from other classes yet, and I just can't get the darn thing to do what I want it to do!
The assignment requirements are:
1. Change a card game application that draws two cards
and the higher card wins, to a Blackjack application
2. Include a new class called Hand
3. The Hand class should record the number of draws
4. The application should prompt for a number of draws
5. The game is played against the Dealer
6. The dealer always draws a card if the dealer's hand total is <= 17
7. Prompt the player after each hand if he wants to quit
8. Display the total games won by the dealer and total and the total games wond by the player after each hand
9. Display all of the dealer's and player's cards at the
end of each hand
10. Player has the option of drawing an additional card after the first two cards
11. The Ace can have a value of 11 or 1
(Even though it's not called for in the requirements, I would like to be able to let the Ace have a value of 1 or an 11)
The following is my code with some comments about a few things that are driving me nuts:
import java.util.*;
import javax.swing.*;
import java.text.*;
public class CardDeck
public CardDeck()
deck = new Card[52];
fill();
shuffle();
public void fill()
int i;
int j;
for (i = 1; i <= 13; i++)
for (j = 1; j <= 4; j++)
deck[4 * (i - 1) + j - 1] = new Card(i, j);
cards = 52;
public void shuffle()
int next;
for (next = 0; next < cards - 1; next++)
int rand = (int)(Math.random()*(next+1));
Card temp = deck[next];
deck[next] = deck[rand];
deck[rand] = temp;
public final Card draw()
if (cards == 0)
return null;
cards--;
return deck[cards];
public int changeValue()
int val = 0;
boolean ace = false;
int cds;
for (int i = 0; i < cards; i++)
if (cardValue > 10)
cardValue = 10;
if (cardValue ==1)     {
ace = true;
val = val + cardValue;
if ( ace = true && val + 10 <= 21 )
val = val + 10;
return val;
public static void main(String[] args)
CardDeck d = new CardDeck();
int x = 3;
int i;
int wins = 1;
int playerTotal = 1;
do {
Card dealer = (d.draw());
/**I've tried everything I can think of to call the ChangeValue() method after I draw the card, but nothing is working for me.**/
System.out.println("Dealer draws: " + dealer);
do {
dealer = (d.draw());
System.out.println(" " + dealer);
}while (dealer.rank() <= 17);
Card mine = d.draw();
System.out.println("\t\t\t\t Player draws: "
+ mine);
mine = d.draw();
System.out.println("\t\t\t\t\t\t" + mine);
do{
String input = JOptionPane.showInputDialog
("Would you like a card? ");
if(input.equalsIgnoreCase("yes"))
     mine = d.draw();
System.out.println("\t\t\t\t\t\t" + mine);
     playerTotal++;
     else if(input.equalsIgnoreCase("no"))
System.out.println("\t\t\t\t Player stands");
     else
System.out.println("\t\tInvalid input.
Please try again.");
I don't know how to go about making and calling a method or class that will combine the total cards delt to the player and the total cards delt to the dealer. The rank() method only seems to give me the last cards drawn to compare with when I try to do the tests.**/
if ((dealer.rank() > mine.rank())
&& (dealer.rank() <= 21)
|| (mine.rank() > 21)
&& (dealer.rank() < 22)
|| ((dealer.rank() == 21)
&& (mine.rank() == 21))
|| ((mine.rank() > 21)
&& (dealer.rank() <= 21)))
System.out.println("Dealer wins");
wins++;
     else
System.out.println("I win!");
break;
} while (playerTotal <= 1);
String stop = JOptionPane.showInputDialog
("Would you like to play again? ");
if (stop.equalsIgnoreCase("no"))
break;
if (rounds == 5)
System.out.println("Player wins " +
(CardDeck.rounds - wins) + "rounds");
} while (rounds <= 5);
private Card[] deck;
private int cards;
public static int rounds = 1;
public int cardValue;
/**When I try to compile this nested class, I get an error message saying I need a brace here and at the end of the program. I don't know if any of this code would work because I've tried adding braces and still can't compile it.**/
class Hand()
static int r = 1;
public Hand() { CardDeck.rounds = r; }
public int getRounds() { return r++; }
final class Card
public static final int ACE = 1;
public static final int JACK = 11;
public static final int QUEEN = 12;
public static final int KING = 13;
public static final int CLUBS = 1;
public static final int DIAMONDS = 2;
public static final int HEARTS = 3;
public static final int SPADES = 4;
public Card(int v, int s)
value = v;
suit = s;
public int getValue() { return value; }
public int getSuit() { return suit; }
public int rank()
if (value == 1)
return 4 * 13 + suit;
else
return 4 * (value - 1) + suit;
/**This works, but I'm confused. How is this method called? Does it call itself?**/
public String toString()
String v;
String s;
if (value == ACE)
v = "Ace";
else if (value == JACK)
v = "Jack";
else if (value == QUEEN)
v = "Queen";
else if (value == KING)
v = "King";
else
v = String.valueOf(value);
if (suit == DIAMONDS)
s = "Diamonds";
else if (suit == HEARTS)
s = "Hearts";
else if (suit == SPADES)
s = "Spades";
else
s = "Clubs";
return v + " of " + s;
private int value; //Value is an integer, so how can a
private int suit; //string be assigned to an integer?
}

Thank you so much for offering to help me with this Jamie! When I tried to call change value using:
Card dealer = (d.changeValue());
I get an error message saying:
Incompatible types found: int
required: Card
I had my weekly class last night and the professor cleared up a few things for me, but I've not had time to make all of the necessary changes. I did find out how toString worked, so that's one question out of the way, and he gave us a lot of information for adding another class to generate random numbers.
Again, thank you so much. I really want to learn this but I'm feeling so stupid right now. Any help you can give me about the above error message would be appreciated.

NEED HELP WITH ZEN VISION M PLEASE HE

Similar Messages

Maybe you are looking for