Need help-WLC4402. Both primary and backup images not found

I didn't find any procedure to upgrade from bootloader.
1. Run primary image (version Not Found)
2. Run backup image (version Not Found) (active)
3. Manually update images
4. Change active boot image
5. Clear Configuration

Antonio,
The only way to recover this WLC is with the TAC - you need to up load specific files, only they will give them to you.
HTH>

Similar Messages

  • Need help.  Both iTunes and Setting's for photo usage show about 2000 more photos then appear on the Camera Roll with no additional libraries.  This takes up many gb of phantom photo storage.  I just upgraded software, I've reset the phone.  Need help!

    iTunes - Photos  36.71 GB and 7265 Photos
    Settings/General/About 7086 Photos and 202 Viedos
    Settings/General/Usage 35.8 gb for Photos & Camera
    Photo app (one it comes with) shows ONLY 5522 on the Camera Roll this matches what it shows when I access photos with PC
    How do I get rid of the phantom photos using up my gb's.  I want access to the addtionaly storage!  Please Help
    note- not tech savy so an easy fix or detailed step by step is appreciated

    iTunes - Photos  36.71 GB and 7265 Photos
    Settings/General/About 7086 Photos and 202 Viedos
    Settings/General/Usage 35.8 gb for Photos & Camera
    Photo app (one it comes with) shows ONLY 5522 on the Camera Roll this matches what it shows when I access photos with PC
    How do I get rid of the phantom photos using up my gb's.  I want access to the addtionaly storage!  Please Help
    note- not tech savy so an easy fix or detailed step by step is appreciated

  • Need help scanning in Pictures:hp 4500-pics not found/trying to open scanning session

    I have successfully scanned once with my hp 4500 printer, but once images are scanned nothing happens.  They are not in iphoto even though I scanned them to pictures folder.  When I open the printer scanner icon it says "trying to open scanning session" and remails here indefinitely.  HELP!

    OS X 10.6.8
    Regardless of selecting pictures, or iphoto, once that first scan is done, the pics are not there and no other scans can be done afterwards without the printer/scanner locking up and saying trying to open scanning session.  In image capture my printer scanner is not visible, the printer is visible however as a desktop icon.
    Thanks for any help!

  • I can't find my serial number and once I do I would like to move my Pro to another computer. Need help with both.

    I can't find my serial number and once I do I would like to move my Pro to another computer. Need help with both.

    Hi Rick ,
    Here is the link that will help you find the serial number for your product quickly .
    https://helpx.adobe.com/x-productkb/global/find-serial-number.html
    You would have to deactivate that software from your older machine first.
    Refer to the following link to deactivate your product .
    https://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
    After it is deactivated from the older machine you can use it on your new machine just by entering the serial number of the product .
    Let us know if you need further assistance.
    Regards
    Sukrit Dhingra

  • I need help, yesterday I installed and reinstalled the Yosemite system and take long to turn on my laptop, the bar takes to fill, and I'm worried. Can you help? thank

    I need help, yesterday I installed and reinstalled the Yosemite system and take long to turn on my laptop, the bar takes to fill, and I'm worried.
    Can you help? thank

    revert back to Maverick that is what I had to finally do. This was the worst upgrade I have ever seen. Hopefully you have Time Machine backup and can revert back. It was pretty painless except for a few issues. I will wait until Apple gets their stuff together on this upgrade or may never will.

  • NEED HELP!! i restore backup at the wrong iphone

    NEED HELP!! i restore backup at the wrong iphone
    i have 2 iphone 4s.. i already have backuped the 1st iphone, then the 2nd iphone not yet backuped.
    when i plug the 2nd iphone it restore the backup of 1st iphone.. now the 1st and 2nd iphone has the same files... the original files of 2nd iphone has gone, how to restored the original files of 2nd iphone since i restored the backup of 1st iphone.and i do not have backup for the 2nd iphone. >.< PLEASE HELP!!!!

    With no backup for the 2nd iPhone, you can't.

  • I need help importing navigation bars and rollover buttons from fireworks?

    I need help importing navigation bars and rollover buttons from fireworks, drop down menus and rollover states won't work!
    Thanks

    In my experience, the code created by graphics apps is less than satisfactory. And image based menus are very awkward for several reasons. 
    #1 If you decide to change your menu later, you must go back to your graphics app and re-craft the whole thing.  After 2-3 times of this, it gets old in a hurry.
    #2 Image based menus cannot be "seen" by search engines, screen readers and language translators.
    #3 CSS styled text menus are better for your site's visibility, accessibility and they are a snap to edit in Dreamweaver.
    That said, if you're still married to image based menus, use Fireworks to create images only. Use Dreamweaver's Image Rollover Behaviors to create your rollover scripts.
    Nancy O.

  • WAE 611-k9: how to config primary and backup for two WAE611s?

    hi,everyone:
    I want to config two WAE611 AS my proxy servers,the one is primary and the other one is as backup,so based-config guide(the primary and backup proxy server), i need config like this,
    http proxy outgoing host 10.1.1.1 8088 primary
    http proxy outgoing host 10.1.1.2 220
    but the host ip address 10.1.1.1 is my WAE611 interface f0/1 ip address or not?
    if not ,pls tell how to config primary and backup using two WAE611?
    thanks
    David

    hi,
    By the way,two WAE611 connect to cisco6509 on the same vlan.
    and I need WAE611 as my proxy server,there is not other proxy server in my LAN.
    thanks

  • Primary and Backup Resource

    Hi -
    We were trying to set a primary and a backup resource using Oracle CRM Foundation but standard functionality does not allow us to set it.
    All primary resources will be given priority for handling Leads, SR and tasks and if Primary is busy or on leave then same leads, tasks and SR will be handled by backup.
    Does anybody have done any customization for primary and backup resource.
    Girish

    Yes both computers can be on. The license agreement is that you will not be using Adobe products simulateously on two computers with one subscription.

  • My iPod touch was stolen and recovered.  I can use my Apple id for this site but the theif changed the Apple id needed to update apps etc and I do not know how to delete his acct. Any help with this will be greatly

    My iPod touch was stolen and recovered.  I can use my Apple id for this site but the theif changed the Apple id needed to update apps etc and I do not know how to delete his acct. Any help with this will be greatly appreciate

    If the thief enabled activation lock on the device, then there is nothing that can be done.  Only the password for the Apple ID that it is locked with can disable activation lock.

  • Need help with Blog, Wiki and Gallery

    Hi Team,
    Need help with Blog, Wiki and Gallery startup. I have newly started visiting forums and quite interested to contribute towards these areas also.
    Please help.
    Thanks,
    Santosh Singh
    Santosh Singh

    Hello Santhosh,
    Blog is for Microsoft employees only. However, you can contribute towards WIKI and GALLERY using the below links.
    http://social.technet.microsoft.com/wiki/
    http://gallery.technet.microsoft.com/

  • How do I stop needing to scroll both horizontal and vertical in my folders to see all of the content.

    How do I stop needing to scroll both horizontal and vertical in my folders to see all of the content.

    There is no cancel button.
    I don't see a download all button that will download everything from iCloud anyway. The download all button that I see refers only to the particular artist or album that you select from the left had side. I see no download all button for TV Shows or Movies.

  • Need to perform both Queue and stack operations in Visual C# code

    Need to perform both Queue and stack operations, is any Data Structure available for this. or how can i custom create the structure for this?

    Hi,
    In this structure contains base logics of Queue and Stack. Well stack plays major role here with operations of PUSH, POP with additional operation of Queue i.e., ENQUEUE and DEQUEUE.  Here the stack has enqueue and dequeue 
    https://code.msdn.microsoft.com/The-Stacked-Queues-An-11f3703a
    Regards,
    Selva Ganapathy K

  • I am using PS cs6 and lightroom and I am having a hard time know what color space to choose.  The lab that I am using told me that their color space is sRGB.  Do I need to have both PS and Lightroom set at sRGB or should I have PS set at adobe RGB and jus

    I am using PS cs6 and lightroom and I am having a hard time know what color space to choose.  The lab that I am using told me that their color space is sRGB.  Do I need to have both PS and Lightroom set at sRGB or should I have PS set at adobe RGB and just set my export from lightroom as sRGB?

    Please post in the Photoshop forum.
    http://forums.adobe.com/community/photoshop
    Bob

  • How to spend 0.20 in itunes? I need to change my country and itunes does not allow me because I have 0.20 left to spend. I can't purchase any more credit because I'm not in the US any more and Itunes just accept those. I need help!

    I need to change my country and itunes does not allow me because I have 0.20 left to spend. I can't purchase any more credit because I'm not in the US any more and Itunes just accept those. I need help!

    Click here and request assistance.
    (65879)

Maybe you are looking for

  • Errro while creating web service in NetWeaver 7.1

    I am working with EJB 2.1 project in Netweaver 7.1 . After creating session bean when i m trying to create webservice i m getting following error IWAB0234E An internal error occurred. Details: null     java.lang.NullPointerException     at org.eclips

  • Dismount multiple external hard disk drives

    I have multiple external hard disk drives and was wondering what the command line is that will dismount all of these at once? Note that there is also one external DVD unit as well which I would not want to dismount. Thanks, Lyman

  • Balance Upload

    Dear All I want to Upload the balances from the Trial Balance such as Vendor Balances, Customer Balances, P&L Balances,B&S Balances, SGL Balances in the SAP. I have developed the following strategy.                                  PK                

  • Video Out - Tecra 8000

    I have a Tecra 8000 with Windows XP Pro installed. Everything works beautifully I have updated the BIOS to v9.3 - BUT I can't get the video out connections to work. I have tried the RCA plug on the back, and also connected the SVGA dongle to the side

  • IPod refuses to import .mp4s

    My 60GB video iPod is being unruly. I open iTunes and attempt to put .mp4s on to it and the little green "+" does not appear as I hold and drag the file over the iPod icon in the side bar. There is plenty of space, at least 48GB, and when I try to "c