Need Help: Workflow Decision Task not visible in NWBC for customer Task

Hello All,
I am new to NWBC configuration , need ur expert knowledge for the below issue. I have checked the treat . Approve/Reject button for SRM Approval for RFx response ,but not able to get the exact steps for the configurations in NWBC.
Requirement.
     We are working on SLM/SRM module, where we have requirement to create a custom workflow with custom Task for which we have executed below actions.
Created the Custom Workflow.
Created the custom Task with custom ZCLASS and ZEVET.
Created   Event linkages in SWE2.
After doing this we are getting the workitem in the NWBC, currently we don’t have the Portal system in place, so we are using the NWBC for all our testing.
What is the issue?
     When we select the workitem in the NWBC (UML) inbox , the Decision Task ie “Approve” or “Reject” button are not visible , where as for SAP standard Task buttons are visible.
What help we need?
When we cross check the SCN/IBM portal, found that we need to do the XML file configurations. Can you any one kindly let us know the steps we need to follow to achieve our functionality.
Thanks a lot in advance.
Thanks and Regards
Channa

You need to share the details of what Inbox you are using, configuration steps depend on it. If you aren't using portal, you aren't using UWL and there is no UML inbox. You need to get your facts straight. Most likely you are using the Business Workflow Inbox (SWF_WORKPLACE) or the Lean Inbox (IBO_WDA_INBOX). Both are based on Web Dynpro ABAP and POWL but the configuration is different. Regardless, you posted this in the wrong space. Correct space is either SAP NetWeaver Business Client or Web Dynpro ABAP.

Similar Messages

Need help with Itunes problem not being able to put custom made ringtone on iphone 4s.

My iphone 4s is running iOS7. My windows laptop is running the latest version of itunes, i follow instructions everywhere to get the ringtone i made onto my cellphone and i get stuck where it says to go to the apps tab and then scroll down till you see the apps you have and choose the app that you made the ringtone with. Well when i select apps it just goes to the app store, it doesn't do anything else. How in the world do i get that to come up so i can move the ringtone from the app to my phone??? please help!

Although WAV files have the same audio coding as an audio CD, a disc full of WAV files does not act like an audio CD; it lacks the indexing and ToC needed in order for a "regular" CD player to play it. As Diane notes, put your WAV files in an iTunes playlist and burn it as an *audio CD.*

Hi, I need help my computer is not starting up at all, nothing happening when I press the button on/off. The battery charger is working as using it for another laptop. Not sure what to do. Anyone have any idea? many thanks

Hi, I need help my computer is not starting up at all, nothing happening when I press the button on/off. The battery charger is working as using it for another laptop. Not sure what to do. Anyone have any idea? many thanks

You could try a SMC reset:
http://support.apple.com/kb/HT3964
If no change, do what Allan advises.
Caio.

I have updated my iphone this evening and is has asked me to connect my phone to itunes, I connected it to a computer with itunes and it says it needs restoring? and all my images etcwill be earsed I need help as I have not backed my iphone up previously

I have updated my iphone this evening and is has asked me to connect my phone to itunes, I connected it to a computer with itunes and it says it needs restoring? and all my images etcwill be earsed I need help as I have not backed my iphone up previously please help?

YOur phone is in recovery mode, any data that was on there is already gone, you will have to restore your phone and use whatever backup you to restore to.

Hi I need help ..I do not know how to edit a pdf file that I scanned in,

Hi I need help ..I do not know how to edit a pdf file that I scanned in, will someone please tell me what I should do PLEASE HELP

What program are you using? If it is just Adobe Reader you can not edit.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

I need help my iphone 5c has been on charge for 5 hours and still has not turned on past the charging symbol, what can i do? (baring in mind i got this phone 2 days ago brand new.)

i need help my iphone 5c has been on charge for 5 hours and still has not turned on past the charging symbol, what can i do? (baring in mind i got this phone 2 days ago brand new.)

Do you see a lightning bolt near the battery , Battery is charging (supposedly( IF not return to where you purchased it (also make sure that the charger is on) if still not charging with lighting bolt bring it back

Hello,I need help.ipad 3 does not support flash media player.which player must I download instead of flash media player?

Hello,I need help.ipad 3 does not support flash media player.which player must I download instead of flash media player?

Flash is not supported on the iPad - and as Adobe have announced that they are stopping development on all mobile versions of it, it probably never will be.
Browser apps such as Skyfire, iSwifter, Puffin and Photon 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news sites, have their own apps in the App Store.

I need help to decide which macbook pro is best for photo editing, editing movies and doing all the rest too like excel, word etc. 13"

I need help to decide which macbook pro is best for photo editing, editing movies and doing all the rest too like microsoft office products ...excel, word etc. I am new to the apple world and have liked the idea of the MAC Book Pro 13" but really dont know if this is good enough or if the computer will soon crash?
13-inch: 2.6GHz
with Retina display
Specifications
2.6GHz dual-core Intel Core i5
Turbo Boost up to 3.1GHz
8GB 1600MHz memory
512GB PCIe-based flash storage1
Intel Iris Graphics
Built-in battery (9 hours)2

That's a fine machine and, with 8GB of RAM and 512GB flash storage should serve you well for light video/photo editing as well as for 'normal' usage. And it should last you for years to come.
Good luck in making your decision!!
Clinton

Elements 11 albums not visible in iTunes for synching

I've recently upgraded from Elements 8 to 11. New albums created in organiser 11 are not visible in iTunes for synching to my iPod. All of the albums created in Elements 8 are still visible. Is this a bug or is there something I need to do to make the new albums visible?

Yes I’m sure Adobe think it’s a third party problem and probably have little interest in synching with Apple devices. It’s a bit disssapointing and whilst Mac users can sync with iPhoto or Aperture, the majority of users will be using Windows and will wish to sync their PSE11 albums. Hopefully Apple & Adobe will talk to each other.
There is a work around but it involves first creating the album in PSE10 (or your earlier version) and importing it into PSE11. It will then be recognized in iTunes when you connect your device and click on the Photos tab. Let me know if you want instructions.

Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.

Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.
I have an appointment with a director on Tuesday. I want to demo iTunes U. Problem is I have never used it before and have no idea how to set it up and even if I should sign up.
Please help any ideas regarding iTunes U and how I should direct the meeting tomorrow.
Please please post here.
Thanks
Tiaan

Greetings fcit@!A,
After reviewing your post, it sounds like you are not able to select none as your payment type. I would recommend that you read this article, it may be able to help the issue.
Why can’t I select None when I edit my Apple ID payment information? - Apple Support
Thanks for using Apple Support Communities.
Take care,
Mario

Need help activating Advanced Calling 1.0 on Verizon for iphone 6 business account

I need help activating Advanced Calling 1.0 on Verizon for iphone 6 business account. I was on the phone with Verizon for over an hour and they can't figure out why it's not working. I'm trying to activate the Voice & Data and all I get is a spinning circle but it never actually works. Anyone have any ideas?

I just pulled this from the Verizon page. Not sure if it applies to you or not, but it could explain part of your problem since you identify this as a business account.
Q: Who is eligible for Advanced Calling 1.0?
A: Any Verizon customer with a compatible phone and a postpaid calling plan is eligible. Please note that the following features are currently incompatible with Advanced Calling 1.0: Ringback Tones and Caller Name ID. Additional incompatible features apply for Business and Government customers.

Need help getting new printer hp deskjet 3520 setup for eprint and wireless

need help getting new printer hp deskjet 23520 stup for eprint and wireless

Hi Pastorlee7,
I see that you're having problems setting up your printer. I would take a look at the document below.
Hp deskjet 3520
Let me know how it goes.

Some workflow Mail items not visible in SCOT in QA but there in Development

Hi,
In our development system and QA system the SCOT is enabled to test the workflow for credit approval. The settings as far as I can see is same in both the systems except in address types maintained in QA is specific and it is * in development. In QA while the task for mails is raised, the items with recipient type Organisation object are not visible in SCOT overview of orders but in development all the items are visible. In development, the mail is also activated based on the user id but this is not working in QA system where the only item that is sending the mail is the one with recipient type Email. Can you plaesea advice what is wrong in teh configuration?
Regards,
Arcahna

Hi,
In our development system and QA system the SCOT is enabled to test the workflow for credit approval. The settings as far as I can see is same in both the systems except in address types maintained in QA is specific and it is * in development. In QA while the task for mails is raised, the items with recipient type Organisation object are not visible in SCOT overview of orders but in development all the items are visible. In development, the mail is also activated based on the user id but this is not working in QA system where the only item that is sending the mail is the one with recipient type Email. Can you plaesea advice what is wrong in teh configuration?
Regards,
Arcahna

Please help: Workflow service is not connected

This questions is in continuation to my query posted ...see below link
https://social.technet.microsoft.com/Forums/office/en-US/e6a880d4-e252-49bc-8866-f3f959abf23f/do-i-need-to-have-sharepoint-designer-2013-installed-on-sharepoint-2013-production-server-to-create?forum=sharepointgeneral
I noticed that the web application is associated with "Workflow Service Application Proxy" from Central Administration site. However
I do not see Workflow Service application listed in the Manage service applications, but only Workflow service application proxy is listed and when I clicked on this, I see that the workflow is not connected though it shows started.
Also Ran ‘Get-WFFarmStatus’ command to check if the Workflow service is running, and to my surprise it is running.
Snapshot below:
If I re-register the workflow (used below command), I am getting Register-SPWorkflowService : Failed to register because the farm or partition
is already registered with a workflow service
Register-SPWorkflowService -SPSite "http://abc" -WorkflowHostUri "http://localhost:12291" -AllowOAuthHttp
I am unaware of this… but now I am doubting if this is creating the problem. I have registered the workflow withhttp://localhost:12291
on my SharePoint server. Should the workflow have DNS entry to register?
Also, we do not have user profile service, so the user profile service & user profile synchronization service are not started. Do I need to start ‘user profile
synchronization service’ as Nikhil suggested.
Please help me to resolve this issue please.
Regards,
DJ

Hi Rookio,
Based on your description, your workflow service is not connected.
For troubleshooting this issue, I recommend to verify the things below:
1. Check the workflow management site is starting. If yes, restart the workflow management site.
2. Check the ULS log to see some information about your problem.
3. Re-register workflow service with force: Register-SPWorkflowService -SPSite "http://myserver/mysitecollection" -WorkflowHostUri "http://workflow.example.com:12291"
-AllowOAuthHttp -force.
4. Run the PowerShell command to see if the issue still occurs: Enable-SPFeature -Identity WorkflowServiceStore –Url $yourUrl.
Per my knowledge, you do not need to start user profile synchronization service when configuring the workflow manager.
However, the user who deploys and runs a workflow must be added to the User Profile service, so it is recommended to start the user profile service application.
http://technet.microsoft.com/en-us/library/jj658588(v=office.15).aspx
More reference:
http://www.datazx.cn/Forums/en-US/7675ea81-457d-4491-a224-e34471beec63/action?threadDisplayName=sharepoint-2013-workflow-manager-not-connected&forum=sharepointcustomization
http://sharepoint.stackexchange.com/questions/79275/sharepoint-2013-workflow-manager-missing-service
http://anujabhojani.blogspot.be/2013/06/the-option-for-sharepoint-2013-workflow.html
Best regards,
Victoria
Victoria Xia
TechNet Community Support

LOok for Emergeny help about Property editor not visible

For some reason, my Property Editor window of Workshop is not visible any more. I have tried restart workshop and from possible menus.
I have read a posting dated Mar 10, 15,17 by Jared, Judecki, he said even by restall the workshop, the problem still there. He talked about editing a properties file that Weblogic placed in Window's profile
(which related with the window's location.
I post this problem again want to get tour response especially from Jared Judecki, if you know what's the name of properties file and how to edit it, also if you know the email of Jared Judecki, that's of great help.
Thanks again!!
Please tell me the steps how to fix the "property
editor not visible in weblogic", where is the properties file related with weblogic in windows profile. and how to edit this file.

Did you try selecting portal components like books, pages, portlets. I have seen this problem too. But it would go away when you restart workshop.
--SJ

Need Help: Workflow Decision Task not visible in NWBC for customer Task

Similar Messages

Maybe you are looking for