Need help! Z2 screen cracked. Need my data out! Check details below.

Hey guys, I need your help desperately.
So, my phone's screen cracked. Honestly, I dropped it and now it has some fluid and some parallel lines showing with shades of pink color and a very lil amount of blue and green color lines and its touch itsn't working either. It's screen is shattered. So, basically, I can touch it but it will touch at multiple places like crazy but I can't see anything. And to make things worse I have a pin lock. ^_^ How annoying pleasant is that. I went to the service centre, they said that my phone's screen cannot be replaced as this is a Z series and Z series only have the whole mobile replacement option. So, I need to get my data out.
My USB debugging is turned on, maybe this can help me? But Idk how. If it can, tell me!
And I can't access my phone until unless I unlock the pin lock on my phone. Please help me, I need my data. :'(
I saw this OTG method. I have an OTG cable but even if I connect mouse, I can't see anything so OTG with mouse failed. But I saw a post, someone said they used a keyboard and did some up and down and left right arrow keys and enter and it worked. If you know this OTG KEYBOARD method, please briefly explain it to me!
I read about some Android Debug Bridge. If you know about this too, please explain it to me. I'm literally.. crying inside.That data is.. my LIFE!
Anyways.. I read also about the Multipupose MHL to HDMI OTG with USB support, with which you can use a mouse and display the screen of your mobile on the TV or PC Monitor. But I'm not sure about that, it will cost me around 25 USD but I've seen people say in the reviews that it doesn't work for XPERIA Z2 or Z3 and stuff like that. So, I don't wanna risk it.
So, guys. If you know any other methods or these methods in brief with which I can get my internal data out, do tell me. And then when I get it out, I will give my phone to the service centre for replacement.
Thank you..

Sorry to hear about your phone
If you have a computer that is allowed to access the phone over ADB you could try using a 3:rd party software like MyPhoneExplorer from www.fjsoft.at to access it.
If you don't have a computer that is allowed over ADB in the phone i would recommend that you try to get hold of a TV with MHL or an MHL-adapter (but make sure it supports CEC). If you have a numeric PIN you can unlock the phone using the TV remote. It works fine when i test it with a Sony TV here. When unlocked you can then connect it to a computer.
I edited your post a little to remove some offensive words.

Similar Messages

Need help with representing 2 bits of data in a column

I Need help representing only 2 bits of data in a column in order to save space.
Is that possible?

CommitMan wrote:
I Need help representing only 2 bits of data in a column in order to save space.
Is that possible?Yes - using Assembler....
If you need to count bits to save space, then you must be on 70's, or early 80's, hardware. So using Assembler should not be a problem. Let me guess.. a 8051 microcontroller from the 1980?
Here's what the 8051 code and memory optimisation manual says:
>
The simplest and best way to get dramatic improvements
in efficiency is to look for all variables that will have only
binary values (0 and not 0), and define them as type 'bit‘:
bit myVar;With bit variables, the full set of 8051 bit-level assembler
instructions can be used to generate very fast and
compact code. For example, the following C code:
myVar = ~myVar;
if (!myVar)
}Generates only two lines of assembler:
B200 CPL myVar
200006 JB myvar,?C0002This example uses only 5 flash bytes and 8 CPU cycles.
When you use bit variables, you can implement a
nontrivial line of C code with just one assembler
instruction.
>
<i>PS. Yes, the above is really from a manual for a real 80s microcontroller. And yes, I'm poking fun at your question as saving bits were a problem in the 80s and prior. It should not be a problem in the 21st century information system and database.</i>

I need help! Do I need to have a MacBook/Mac Pro to submit/distribute an app game in Apple Store? I hired a designer and developer to do it for me..should be done next week.I have an Ipad.Is Ipad going to be just fine?I know I have to sign up for the Deve

Hi,
I need help! Do I need to have a MacBook/Mac Pro to submit/distribute an app game in Apple Store? I hired a designer and developer to do it for me..should be done next week.I have an Ipad.Is Ipad going to be just fine?I know I have to sign up for the Developer Program(I started that..though not finished yet)My developer will walk me thru submitting it.Please help.
Thanks,
sheapps28

You'll need a Mac with a support OS X and tools to complete the process.

Need help in screen capturing for flash CS4 AS3

Hi, i need help!!!!!!!!!!!!!!!!!!!!!! URGENT!
I am currently doing Augmented Reality.
I got my marker to detect my model but my problem now is how to screen capture the content that is in swf.
(As in capture the dae model shown in the comp not from webcam.)
& also i just want to capture the swf window not the whole desktop.
I read online, they say its impossible?
Or is it possible to call screen capture function in javascript to flash CS4? (LIke external data)
(Moreover, does anyone know how to detect multiple dae models with different markers?)
Anyone can help??? Thanks in adv!!

My current program (Flash CS4, AS3) only can capture what the webcam sees.
How do i change it to screen capture (something like print screen) with my .DAE models?
In the case, when i click on the capture button, it print screen.
Here's part of the code that capture what the webcam sees.
private function captureImage(e:MouseEvent):void
   bmd.draw(stage);
   bmp = new Bitmap(bmd);
   bmp.x = 140;
   bmp.y = 40;
   addChild(bmp);
   capture.visible = false;
   saveButton.visible = true;
   discardButton.visible = true;
Really really need help! URGENT!
Thanks!

Screen cracked, Need to turn phone off completely.

Off course, less than a week after my boyfriend gets this phone, he drops it and the screen cracked. We DO have insurance, but have to wait a week till payday for the deductible. Here is my problem.
Screen is cracked, phone is still on. I need to turn it off, as the alarms he has set for work keep sounding and are a pain to stop, as he has multiple each day. I know I can wait for the battery to die, of of course, BUT
I've read that I can do what is comparable to a battery pull with the volume down + power button for 10 seconds. I have done this, but it seems to restart rather than turn off. Is this what that action should do? Or am I doing it wrong. If this is what the action should do, am I out of luck until the battery dies?

This is what I found in the manual, page 55 in the Troubleshooting area for your device...
Crash recovery
In the unlikely event that your smartphone stops
responding to touches and key presses, try a forced
reboot—press and hold both Power and the down
volume key for 10 seconds.
http://cache.vzw.com/multimedia/mim/mot_droid_razr/droid_razr_manual.pdf

I need help to convert a string to date and time

Good aft,
1.How can i get a date from the user input thro' Frames?
2.How to parse it to the date object(I need to include java.util.Date but for the database i need to include java.sql.*,if i do so, i have error as
found:java.util.Date
Required:java.sql.Date)
3.How to insert into the database
The same i need help to insert time into database?
I need solution and explanation...
Reply me immediately...
If u send me the code, its better to me.

Hello,
The best way is to use the HEX to decimal coversion VI in the string pallette. Then, write this decimal directly to your chart. If you are doing it a point at a time put it into a while loop.
Doug

Need help bad, screen problem

heres my problem. i setup arch on my desktop last night (64bit), i installed my nvidia drivers. i have a 21" crt sun monitor, not sure the model number. but i brought it to a friends this morning to update and install kdemod since they have highspeed. now i was hooked up to their monitor, they have a cheap 15" crt. so it worked fine there, now when i got it home, i get a black screen when it boots up on my monitor, i can get to a console however
i deleted a couple lines in the monitor section in the xorg.conf............so now i get 640x480 res, but i cant use anything higher
been searching around, and i found some stuff about running Xorg -configure, but i get something about a tmp file being locked..........and i dont know how to delete anything here from the console
i need help here
Last edited by ssl6 (2007-09-16 07:00:40)

nvm, i just deleted the xorg.conf and rebooted, its fine now
edit// nvm, its not using my nvidia driver.........i might still need help, im trying something right now, not sure what im doing though
ok, i tried to run nvidia-xconfig, and when i rebooted, im back to square one with my monitor flashin an invalid scan frequency
well, i deleted the xorg.conf again and got it booted up. but i generated a new one with nvidia-xconfig again, heres what i puts out, i just need to remember not to reboot any time soon. im using a 7900gs, the newest nvidia 100 series drive from the repo, and arch 64bit on this system by the way
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder26) Wed Jun 13 16:54:14 PDT 2007
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
here's that part of the xorg.conf from my other computer running 32bit arch with a geforce 3 connected to the same monitor via kvm switch. this machine is using a 96xx driver though
Section "Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
Identifier "sun"
HorizSync 31.5 - 82.0
VertRefresh 50.0 - 90.0
EndSection
Section "Device"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
#VideoRam 65536
# Insert Clocks lines here if appropriate
Identifier "geforce"
Driver "nvidia"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "geforce"
Monitor "sun"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
any ideas here?
Last edited by ssl6 (2007-09-16 07:53:48)

Need help using LabVIEW 7.1 and data socket to transfer images

I need help transferring images across a company network using: LV 7.1, IMAQ 3.0 and a PCI 1407 image aquisition card. I am trying to use datasocket to transfer video image across a company network. I have attached sample vis. Thanks in advance for your help.
I. Cyr
Attachments:
Vibration Chamber Vision_Cyr.llb ‏129 KB

Hello –
Something that you need to consider is the fact that when you are sending an image over Data Socket, it is not really the image what is being transferred but a pointer to the image. Please take a look into this Knowledgebase.
Also, you might find this Example Program useful.
Hope this helps.
S Vences
Applications Engineer
National Instruments

Need Help Urgently - Want to Load Time Data Automatically into Oracle HRMS

Hi All,
I am on my 1st Oracle HRMS project and I need urgent help on HOW TO load Time (IN/OUT) Data from a MS Access database which is populated by a Biometric Hand Geometry System.
And we need to do it in real time as the data inserted in the MS Access Database we need to pull that into Oracle HRMS for Payroll purposes.
If somebody can help me in this I'll greatly appreciate that.
Thanks, AGAIN IT IS VERY URGENT
Zee

Zee,
Let's go back to your core requirement "load Time (IN/OUT) Data from a MS Access database which is populated by a Biometric Hand Geometry System".
Questions:
1. Is this time data to be used to pay a person through Oracle Payroll?
2. What legislation (country) is this for?
3. Are you using Oracle Time and Labor (OTL) as the front-end or do you intend to enter the data directly into Oracle Payroll?
See the following OTL documents:
MetaLink Note 369022.1 - How Can Hours Worked Be Imported into OTL From Third Party System?
MetaLink Note 223987.1 - Oracle OTL HXC TimeStore Deposit API
MetaLink Note 283593.1 - Formatting an Exported Timecard Template using Microsoft Excel
Regards,
Greg

Need help in process chain *need help immdtly*

I need help in creating one process chain.
1. i have to load one infopackage to a PSA.
2. then have to do load for one infocube from two different infocubes one after the other.
for all these loads one restriction of fiscal year period to be common value.
this value may either be allowed to user to select or loaded automatically taking the previous fiscal year value .. any of these two options are fine.
it would be helpful if anyone can help me out.

Here is the code for Z program...you can create Tcode thr SE93 where user can enter value .
parameters: fsper type /BI0/OIFISCPER DEFALUT 2010008.
data: wa_tvarvc type tvarvc.
wa_tvarvc-NAME = 'FISCPER'
wa_tvarvc-TYPE = 'P'.
wa_tvarvc-NUMB = '
wa_tvarvc-SIGN = 'I'.
wa_tvarvc-OPTI = 'EQ'.
wa_tvarvc-LOW = FSPER
INSERT TVARVC FROM wa_tvarvc.
Code for DTP's in Field Level.
data: wa_tvarvc type tvarvc.
select single from tvarvc into wa_tvarvc where NAME = 'FISCPER'.
L_T_RANGE-low = wa_tvarvc-LOW
L_T_RANGE-SIGN = 'I'.
L_T_RANGE-OPTION = 'EQ'.
APPEND L_T_RANGE

Need help on scripting to skip exchange databse for checking

Hello, There is a default script in exchange in 2010 to check the DB replication by default it will check for all BUt if we need to skip any of the DB i need to mentioned the same; so for one DB is working fine but when adding more then one its not
working and alert is getting generated
# Skip checking the "default" mailbox databases. eg: Mailbox Database 0017891750
   # Specify $null (or an empty string) if you don't want to skip any databases.
   [Parameter(ParameterSetName="Server")]
   [string] $SkipDatabasesRegex = "^Mailbox Database \d{10}$|^ABC-DB",
## the BOLD for one Database to skip what if i need to need to skip more then one database , i tried adding the below but seems to be it is not working ?
#Do i need to user comma, or any other symbol to mentioned two DB's
^ABC-DB,HOME-DB", OR ^ABC-DB,^HOME-DB",
#I tried the below but it is not working
# Skip checking the "default" mailbox databases. eg: Mailbox Database 0017891750
   # Specify $null (or an empty string) if you don't want to skip any databases.
   [Parameter(ParameterSetName="Server")]
   [string] $SkipDatabasesRegex = "^Mailbox Database \d{10}$|^ABC-DB|^HOME-DB",

sorry but able to make the changes now and its working as expected .thanks
[string] $SkipDatabasesRegex = "^Mailbox Database \d{10}$|(ABC-DB)|(HOME-DB)",
My point is that you are not supposed edit the supplied scrip but are supposed to pass in your own parameters. THe default behavior is set by the author by design.
Since you have not supplied us with a copy of the script it is not possible to understand exactly what is intended.
Normally we would mark the supplied answer as the "answer" and not your response to that. THe answr was that you need to use a correct RegEx and not just place an arbitrary "OR" in the RegEx.
¯\_(ツ)_/¯

Screen cracked, need help

Hi, my son dropped my phone and the screen has cracked. Although the picture on it is perfect i am unable to do anything with it. It acknowledges nowhere on the screen that I try and tap. I very recently recorded my sons first steps on this phone and I am desperate to be able to retrieve this video. I have not used Sky drive and dont have options set up on my phone to use sky drive as I normally just store things to my computer.
Does anyone know a way that I can get my photos and video's off the phone without having to do anything with the phone itself expect for possibily using a usb cable to connect it to a computer. I can't send it off to be fixed until I can find a way of getting it off them phone. Im desperate and out of ideas. Any help would be greatly apprecaited thank you.

With Windows Vista you should be fine. I would suggest you open device manger on the PC when the phone is connected. You should either find the currently loaded drivers there or a driver with a yellow triangle. In any case, remove these drivers. Now disconnect the 820, remove the battery and re-insert but do not switch on!
Now connect the phone to another USB port. This whould make the phone start. Leave it for a while and it should come up on the PC after which you can double click the phone icon and get to the media content.
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Palm Pre Screen Cracked - Need Help

smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

This same problem just happened to me and
I had to jump through hoops to get anything done about it. It is a known issue and Palm themselves have told me this. My phone is now being sent away to get fixed at no charge to me. The number to call is 1-866-219-7445 (Palm Help Line) then go to Technical Support (2). Tell them the problem with the phone and they will give you a reference#. They then told me to go back to the Bell store that told me they couldn't do anything and give them the phone number along with the reference# and have them call us. Bell did this and then took my phone to get repaired. I told them that the customer service they have is absolutely terrible, making me do all this probably in hopes that I would just go away. Well guess what, I am still here and now you are going to fix it just as you should have in the first place. I hope this will get you somewhere so you can have your phone fixed!!!!

Need help with query that can look data back please help.

hi guys i have a table like such
CREATE TABLE "FGL"
    "FGL_GRNT_CODE" VARCHAR2(60),
    "FGL_FUND_CODE" VARCHAR2(60),
    "FGL_ACCT_CODE" VARCHAR2(60),
    "FGL_ORGN_CODE" VARCHAR2(60),
    "FGL_PROG_CODE" VARCHAR2(60),
    "FGL_GRNT_YEAR" VARCHAR2(60),
    "FGL_PERIOD"    VARCHAR2(60),
    "FGL_BUDGET"    VARCHAR2(60)
)and i have a data like such
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','11','1','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','10','1','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','1','0');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','14','200');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','10','14','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','10','2','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7470','4730','02','10','2','200');I bascially need to get the total of the budget column. however its not as simple as it sound(well atleast not for me.) the totals carry over to the new period. youll noticed the you have a period column. basically what im saying is that
fgl_grant_year 10 period 1 = for account 7600 its $100 and $100 for period 2 you see 100 dollars again this is not to be added this is the carried over balance. which remains $100.
so im trying to write a query that basically does the following.
im given a period for the sake of this example lets say period 1 i get nothing else. I have to find the greates grant year grab the amount for period 14(which is the total from the previous year) and add it to the amount of the current period. in this case period 1 grnt_year 11
so the expected outcome should be $700
240055     240055     7240     4730     02     10     14     200
240055     240055     7600     4730     02     10     14     100
240055     240055     7600     4730     02     11     1     400keep in mind that im not given a year just a period.
any help that you guys can offer would be immensely appreciated. I have been trying to get this to work for over 3 days now.
finally broke down and put together this post
Edited by: mlov83 on Sep 14, 2011 8:48 PM

Frank
wondering if you can help me modify this sql statement that you provided me with .
table values have been modified a bit.
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','11','00','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','1','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','1','0');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','11','1','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('360055','360055','7200','4730','02','10','1','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('360055','360055','7600','4730','02','10','1','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','14','200');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','10','14','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','14','200');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','2','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','11','2','600');i need to take one more thing into consideration. if the greatest year has a value on period 00 i need to ignore the period 14 and the current period total would be
the current period +(current period - greatest year 00)
hope that makes sense so in other words with the new data above. if i was querying period two of grant year 11. i would end up with $800
because the greatest year is 11 it contains a period 0 with amount of $400 so my total should be
period 2 amount $ 600
period 0 amount $ 400 - period 2 amount of $600 = 200
600+200 = $800
if i query period 1 of grant 360055 i would just end up with 800 of grnt year 10.
i have tried to modify that query you supplied to me with no luck. I have tried for several day but im embarrased to say i just can get it to do what im trying to do .
can you please help me out.
Miguel

NEED HELP IN USING ALL_TAB_COLUMNS FOR RETRIEVING DATA???

A table say T1 contains column like Emp_id,Code.
and there are several Code like C1,C2,C3.
Another table say T2 contains column like
Emp_id,C1,C2,C3.Here the value of the code field of the
T1 table is now column of the T2 table.And the amount of
each code of T1 table is equal to column value of T2
table.
Now I want to retrieve data from T2 table like
C1 200
C2 300
C3 140
I cannot retrieve data like this using all_tab_columns.
I can only getting the column_name but cannot its value.
PLEASE HELP ME...
Edited by: user630863 on Apr 8, 2009 11:37 AM

emp_id | code
001 | C1
001 | C2
005 | C3
005 | C1
002 | C2
002 | C3
Table T1
emp_id | C1 | C2 | C3
001 | 10 | 15 |
002 | | 7 | 12
005 | 45 | | 94
Table T2
I have written a query
select column_name from all_tab_columns a,T1 b
where a.column_name=b.code
and table_name='T2'
OUTPUT:
C1
C2
C3
But I Need data for each employee like
001 C1 10
001 C2 15
002 C2 7
002 C3 12
005 C1 45
005 C3 94
Edited by: user630863 on Apr 8, 2009 1:28 PM

Need help! Z2 screen cracked. Need my data out! Check details below.

Similar Messages

Maybe you are looking for