Need how to for deleting a snippet using a Mac

I tried to follow the steps posted on 12/12/2007 by ThinkInk
but need more detail.
Thank you very much!

hi
delete the settlement rule and you can try.

Similar Messages

How do I delete a file using Xterminal?

Hi , recently in the interest of playing Doom thro my N900 - I copied 3 wad files thro xterminal to opt/doom/wads..
Now i guess this is occupying my root memory? do you know how i can delete the files using Xterminal. pls let me know
thx.

if it is in /opt, it shouldn't be!!
/opt is actually linked into /home
/home is a 2GIG partition on the EMMC that stores /opt (for optified packages.. all packages you download should sit in /opt) and all your settings / content (like address books and conversations)
To delete it using an x terminal, you really mean using a shell.. the shell is what you see inside the x terminal..
cd /opt/blah/dir
rm filename
rm is delete.. or more accurately remove!! It came in a time when keypresses were expensive
cp is copy
mv is move /rename
ls is list (as in dir)
df is diskspace free
du is diskspace used (as in by a file or directory)
there are loads of things like that
be careful.. rm is the easiest way to ruin a system!

How many years do you usually use a mac for?

I was just wondering how long many of you actually use a mac until you buy a new one.

RJB321 wrote:
I was just wondering how long many of you actually use a mac until you buy a new one.
It depends if and how Apple screws us.
For instance I had the PowerMac G5 Duallie with a 30" monitor and Steve Jobs announced the Intel processor swtich, two years later then wouldn't provide OS X 10.6 for my machine so I had to sell it while I could. So I lost about 5-7 years futher producive use of the machine.
Then the 2007 4 year old 15" MacBook Pro I had was working perfectly fine under Snow Leopard, but after I upgraded it to OS X Lion the firmware bricked the machine and Apple would refuse to pay to fix it.
It was their fault too, because Cupertino HQ was pwned by the 750,000 Mac Flashback botnet and OS X Lion was likely tainted by malware to cause such a massive amount of logicboard replacements that were required at the time.
It used to be that Apple (under Steve Jobs) would ignore older Mac's and OS X versions for security updates unless they ran the last two OS X operating system versions, but after Flashback they had to go back and fix so many machines they don't dare to that again.
But Apple has other ways now to force you to upgrade your operating system, especially AppStore as developers will tend ot make programs for the latest OS X version only.
It wouldn't be too bad to upgrade OS X but for the fact that doing so bricks so much of your third party software in the process, gives bad and unwanted features, and then tends slows one's machine down to a crawl as the newer OS X versions are created with newer hardware in mind, not older.
So Apple is basically leveraging more software features and iOS devices to force a faster hardware turnover rate so they can make more money. A lot of the features they are adding are not really used all that much a lot of it is just change for the heck of change and putting a new fancy paint job on the Apple hardware.
"Oh look new OS X, buy a new machine!"
So you have a choice to either keep up with the rapid Apple hardware cycle or buy a Windows machine that will last a decade or more per operating system version.
I know people who still have 10 year old XP machines and they are now getting 10 year life Windows 7 machines.
Apple seems to tie to much features to a new boated OS X version and forcing one to upgrade instead of using OS X and a base and adding new features on top of it if people want it or not. Mac's are laughed out of most corporate enviroments except for a few CEO's , top brass that remain off the networks.
So my turnover rate with Apple hardware since Steve Jobs return has been anywhere from 2-4 years on average, before that it was a lot longer, I could use a machine for a long time like 5-7 years.
I'm hoping with this 17" MacBook Pro lovingly taken care of that I can exceed 5 years, but it's not going to happen because Apple is going to drop support for Snow Leopard 10.6 and the newer operating systems are bloated pieces of ugly crap tied to AppStore/AppleID etc. so the erosion to personal privacy is absolute. They just do things and don't care about what users need or want, it's sickening they think they know what's best for everyone and you need to get aboard their way or tak ethe highway. It's so bad now that even Microsoft has gotten into the customer abuse game with Windows 8.
To reinstall OS X requires a fast Internet connection and I can't trust if the software hasn't been tainted along the way or not. What is wrong with proving USB instlal keys with every new Mac?
Glossy screens and unable to physically remove the storage for secure destruction.
I also don't like the threat that Apple is going to forbid installing software from outside sources, they are already doing everything they can to discourage outside sources, calling them malicious etc. We have been installing software from trusted outside sources for decades with no trouble at all.
They are doing everything possible to drive me and others away as customers and after 20 years I will be finally giving them the boot very shortly.
They can go on making computers only for children, but the Mac professional/power user is a dying breed.

I have two Apple ID, how can I delete one and use the email address associates to the main one?

I have two Apple ID, how can I delete one and use the email address associates to the main one?

If you abandon one of the Apple IDs you will also basically be abandoning any content that you have acquired with that Apple ID. Content can only be updated and re-downloaded with the Apple ID that was used to buy it. Apple will not combine the content of Apple IDs and Apple will not transfer the content from one Apple ID to another Apple ID.

There is a problem in updating iphoto and iMovie, read a response here from a certain Dahveed if I'm not wrong to try this, however I'm a first time mac user, how do you delete this ... /Mac HD/Library/Caches/com.apple.appstore/adoption.plist

There is a problem in updating iphoto and iMovie, read a response here from a certain Dahveed if I'm not wrong to try this, however I'm a first time mac user, how do you delete this ... /Mac HD/Library/Caches/com.apple.appstore/adoption.plist

It says 'To update this application, sign in to the account you used to purchase it.'
However I only have one account. I've tried to sign out and in several times. But it doesn't work. I do remember changing my password recently. Secondly I'd like to add that I got this macbook air 3 days ago. I'm a first time mac user. It had three updates initially. Mountain lion 10.8.2, iphoto and the imovie. I updated the mountain lion, thinking I'd get the iphoto and imovie done later. However now this problem has come up. Thanks for responding. Hoping to hear from you soon again regarding this.

How do I delete an iPad from my Mac, like I never sync in the first place?

How do I delete an iPad from my Mac, like I never sync in the first place?

I have a pc, rather than a mac, but the process is the same from what i have read on the Apple website.
You can restore to original factory settings as ifyou never synced the ipad with a computer by going to settings >reset (last option on the menu) > erase all content and settings.
Youcan also do it by connecting your ipad to your computer and choosing toRestore it from the 'summary' menu (below the Update option). I wasnot able to do it this way because it kept timing out with the iPadsoftware update, but it might work for you.
These options may take a while if you have lots ofcontent but once it is done it will just as it was when you bought it,with factory settings.
NB: Note that this process will erase all content, so if you have purchased apps, music etc, be sure to transfer your purchases first!
This process has worked for me and I am now just syncing my ipad with my desktop instead of my laptop.
Hope this helps.

How do I delete a download from my Mac Air?

How do I delete a download from my Mac Air?

Thank you, simple when you know how I was on 'hold' for over 5 mins to Apple Support & the Chat time didn't even commence either

How can I delete the files .DS_store in Mac OS Yosemite?

How can I delete the files .DS_store in Mac OS Yosemite?

The .DS_Store file is normal. It holds certain settings related to the folder it is found in. Removing these files is futile, as they will come back, as you have observed.
If you are seeing them on your Mac, that means you have changed settings so that your Mac is showing invisible files in the Finder. To reverse that, run the following command in the Terminal:
defaults write com.apple.finder AppleShowAllFiles NO
This will hide them, and any other invisible files, from view.
If you are seeing them on a Windows machine, just ignore them. They're not doing any harm.
If you found a Terminal command that is supposed to stop them from being created, I would be extremely skeptical as to the wisdom of running it.

I need to export many emails from Microsoft Outlook to a PDF, is there a plug in i need to install? Please note I use a mac...thanks!

I need to export many emails from Microsoft Outlook to a PDF, is there a plug in i need to install? Please note I use a mac...thanks!

Hi kellyo68596735,
That capability is a function of PDFMaker, which is currently only available on Windows.
Best,
Sara

How do I delete an account from my Mac and not change the itouch?

how do I delete an account from my Mac and not change the itouch?

What does this mean: "I don' t have an image"?
If you are in the Mail app yo can just delect the message and select delete. See chapter 12 of the users guide
iPod touch User Guide iOS 6

How do i set up a 2nd email for my 10yr old using my .mac account

I'm been fumbling around trying to figure out how to add a new mail account for my 10 yr.old without messing with my own .mac account. I've set up a new user account but when I go to the mail program, I just don't get how to set up a 2nd account using my .mac account. is it possible?

You need to upgrade to a Family Pack account, and then create a subaccount.
(47961)

How can I delete the TemporaryTopic using JMS C API or VC++

Hello everybody,
how can I delete the TemporaryTopic after created TemporaryTopic using JMS C API "JmsSessionCreateTemporaryTopic"?
I checked the document about JMS C API, but I couldn't find any API for delete TemporaryTopic, it's really not existing?
Or if there's any other way that I can delete TemporaryTopic using VC++? Any comments will be appreciated.
Thanks for your help!
Youbing he

As far as I can tell, there's no C-API option for deleting a temporary topic other than to close the connection used to create the temporary topic. Note that it is inefficient to frequently create and destroy temporary topics.
You can get pretty much equivalent performance and functionality with a shared regular topic, non-durable subscriptions, and selectors that take advantage of the "indexed subscriber" optimization. (Consumers specify a selector that is unique to them in the exact form of "MyUniqueID NOT NULL", while publishers send to a specific consumer by adding "MyUniqueID" as a message property. The "X NOT NULL" selector format activates the indexed subscriber optimization.)
Tom
Edited by: TomB on Apr 27, 2010 10:44 AM

Advice needed on monitor for Photoshop and Lightroom use

Hi. I am aserious amature photographer wishing to move to the next level and sell some of my work.
I just had a custom pc built to work with the new copies of Photoshop CS5 and Lightroom 3 I bought (lots or RAM and HD space, ssd, etc....)
The last piece of my system is to purchase a monitor. I want to be somewhere in the better then Best Buy but less than NEC/Eizo range in price, or between $500 - $900. I have worked with cameras since the early 80's and moved to digital several years ago but the only post processing I have done is with Photoshop Elements. I would be doing mostly prints to sell but also need to have a web site to do so. Will also use the pc for daily net surfing... but do not game or watch a lot of video on the pc.
Being really new to this whole process I have a few questions.
The first thing I need to decide is whether I need to look for a wide gamut display or not.
I realize the whole chain must be 10 bit (Adobe -OS - graphics driver - graphics card - display port.
I have Adobe Photoshop CS5 and Lightroom 3, Win7 64 bit, Zotac ZT 50701 10M video card (which uses GeForce GTX 560 fermi and an nvidia chipset. It does have displayport). I am having a hard time determining whether my video card actually supports wide gamut (10bit).
Standard vs Wide Gamut? Is wide gamut important enough to deal with the issues it brings (calibration, viewing things other than PS and LR or color managed, which appear to be rare?) Is sRGB good enough for most prints (don't do fine art, mostly nature and portraits but starting to do some HRD things). If wide gamut is the way to go I have no problem with that and have the time to learn about calibration, color management, etc... But I also want to make sure the juice is worth the squeeze.
24" vs 27"? Is there any advantage to one or the other when editing photos?
IPS vs PLS? I realize they are similar but are there differences worth noting?
Glossy vs Matte Anti-Glare? seems to be a lot of comments regarding the anti-glare coating, mostly poor. Yet I can see issues using a glossy screen in my study with a window to my back.
One manufacturer vs another? I realize Eizo, NEC and LaCie are at the top of the heap. But with my budget, after upgrading my pc and camera equipment, I can't make that work now. So I need to choose from the next group down (Dell, HP, Samsung, Asus...)
One or two monitors? It looks like many (mid-grade) wide gamut monitors do a lousy job of displaying anything but color managed sites. Is that necessarily true of all the mid-grades? Or can some be used for graphics but as well for routine net surfing, MS Office, etc...? Or am I better off getting two monitors, one for graphics and one for the rest? That would pretty much limit me to 24" or less given my budget (used to using a Dell 21" TN monitor that oddly crapped out just as my new pc was done).
The more I read reviews the more confusing it gets. There seems to be a difference of opinion even among pros on whether to go wide gamut or stick with an easier sRGB. Realizing a standard gamut monitor would be cheaper, I do want to make the right decision up front, given my budget.
The one thing I have found astounding is that there is nowhere to actually see many of the monitors I am considering. We live in Nashville TN but my wife is from Atlanta Ga so we drove there a few weeks ago to visit family and for me to visit monitor shops. Even the largest ones there (Fry's and Microcenter) had minimal IPS monitors, a few Dells and HP's. The knowledge of their sales folks was so poor I finally gave up. Felt bad about this until I posted this on another board and got a reply from a guy in LA (second largest city in the US) that he wanted to see a particular monitor and there was no place even there to do so.
Anyhow, here is what I have considered:
24" Wide Gamut: Dell U2410 and Asus PA246Q. Dells appear to be good IF you get a good one. The Asus appears to be a clone of the Dell that gets a lot of good press.
27" Wide Gamut: Dell U2711 that also gets a ton of good reviews
24: Standard Gamut: Dell U2412 and HP ZR2440.
27" Standard Gamut: Samsung S27A850D and Apple Cinema- The Samsung uses PLS technology versus IPS while the Apple is a glossy screen that will work with a pc.
Sorry for the long post. Any comments are greatly appreciated.

dkg62 wrote:
I realize the whole chain must be 10 bit
Not trying to talk you out of setting up a 10 bit pipeline, but it's still not very mature, and it really isn't a necessity to get a good editing experience.
Personally I find advantage in using two 4:3 ratio monitors for Photoshop work. All my panels are on the right monitor, while pretty much the entire left one shows the Photoshop main window and the working canvas space. My desktop is 3200 x 1200 pixels overall, and I find having the panels remain visible all the time is important.
Regarding whether a wide gamut is important... Will you be printing to devices that deliver a wide gamut? What other things will you be doing with your system?
It's not a no-brainer whether a wider gamut monitor is always "better" for everything, since it can accentuate the differences between the output from color-managed and non-color-managed applications, and it's definitely true that not everything is color-managed. With a monitor that's close to sRGB, for example, you might find Internet Explorer output acceptable, while using a wide gamut monitor will result in garishly oversaturated IE displays. On the other hand, FireFox (with a settings tweak) seems to get color management right, so there is an alternative.
I think, as John has implied above, you should work to get your head completely around how color-management works, soup to nuts. If you don't, there will always be things that are a mystery or which surprise you at the wrong times. Being able to order a print and have it come back with the expected color can be very important, as you might imagine.
-Noel

Need user exit when deleting an invoice using MIR6 transaction

Hi all,
I m trying to delete an Invoice using MIR6 transaction. And I need a user exit to be triggered on deletion of an Invoice.
Can anybody help me and let me know if any user exit is available there?
Points will be rewarded.
thanks
Ashish

Hi
Business Add-Ins
Business Add-Ins are a new SAP enhancement technique based on ABAP Objects. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
As with customer exits (SMOD/CMOD [Page 40]), two different views are available:
In the definition view, an application programmer predefines exit points in a source that allow specific industry sectors, partners, and customers to attach additional software to standard SAP source code without having to modify the original object.
In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard logic if one is available.
In contrast to customer exits, Business Add-Ins no longer assume a two-system infrastructure (SAP and customers), but instead allow for multiple levels of software development (by SAP, partners, and customers, and as country versions, industry solutions, and the like). Definitions and implementations of Business Add-Ins can be created at each level within such a system infrastructure.
SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time.
In addition, Business Add-Ins can be defined according to filter values. This allows you to control add-in implementation and make it dependent on specific criteria (on a specific Country value, for example). All ABAP sources, screens, GUIs, and table interfaces created using this enhancement technique are defined in a manner that allows customers to include their own enhancements in the standard.
A single Business Add-In contains all of the interfaces necessary to implement a specific task. In Release 4.6A, program and menu enhancements can be made with Business Add-Ins. The actual program code is enhanced using ABAP Objects. In order to better understand the programming techniques behind the Business Add-In enhancement concept, SAP recommends reading the section on ABAP Objects
DEFINING THE BADI
1) execute Tcode SE18.
2) Specify a definition Name : ZBADI_SPFLI
3) Press create
4) Choose the attribute tab. Specify short desc for badi.. and specify the type :
multiple use.
5) Choose the interface tab
6) Specify interface name: ZIF_EX_BADI_SPFLI and save.
7) Dbl clk on interface name to start class builder . specify a method name (name,
level, desc).
Method level desc
Linese;ection instance methos some desc
8) place the cursor on the method name desc its parameters to define the interface.
Parameter type refe field desc
I_carrid import spfli-carrid some
I_connid import spefi-connid some
9) save , check and activateadapter class proposed by system is
ZCL_IM_IM_LINESEL is genereated.
IMPLEMENTATION OF BADI DEFINITION
1) EXECUTE tcode se18.choose menuitem create from the implementation menubar.
2) Specify aname for implementation ZIM_LINESEL
3) Specify short desc.
4) Choose interface tab. System proposes a name fo the implementation class.
ZCL_IM_IMLINESEL which is already generarted.
5) Specify short desc for method
6) Dbl clk on method to insert code..(check the code in AAA).
7) Save , check and activate the code.
Some useful URL
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
Now write a sample program to use this badi method..
Look for BBB sample program.
AAA
data : wa_flights type sflight,
it_flights type table of sflight.
format color col_heading.
write:/ 'Flight info of:', i_carrid, i_connid.
format color col_normal.
select * from sflight
into corresponding fields of table it_flights
where carrid = i_carrid
and connid = i_connid.
loop at it_flights into wa_flights.
write:/ wa_flights-fldate,
wa_flights-planetype,
wa_flights-price currency wa_flights-currency,
wa_flights-seatsmax,
wa_flights-seatsocc.
endloop.
BBB
*& Report ZBADI_TEST *
REPORT ZBADI_TEST .
tables: spfli.
data: wa_spfli type spfli,
it_spfli type table of spfli with key carrid connid.
*Initialise the object of the interface.
data: exit_ref type ref to ZCL_IM_IM_LINESEL,
exit_ref1 type ref to ZIF_EX_BADISPFLI1.
selection-screen begin of block b1.
select-options: s_carr for spfli-carrid.
selection-screen end of block b1.
start-of-selection.
select * from spfli into corresponding fields of table it_spfli
where carrid in s_carr.
end-of-selection.
loop at it_spfli into wa_spfli.
write:/ wa_spfli-carrid,
wa_spfli-connid,
wa_spfli-cityfrom,
wa_spfli-deptime,
wa_spfli-arrtime.
hide: wa_spfli-carrid, wa_spfli-connid.
endloop.
at line-selection.
check not wa_spfli-carrid is initial.
create object exit_ref.
exit_ref1 = exit_ref.
call method exit_ref1->lineselection
EXPORTING
i_carrid = wa_spfli-carrid
i_connid = wa_spfli-connid.
clear wa_spfli.
check the following user exits for MIR6
                                                                                LMR1M001            User exits in Logistics Invoice Verification
LMR1M002            Account grouping for GR/IR account maintenance
LMR1M003            Number assignment in Logistics Invoice Verification
LMR1M004            Logistics Invoice Verification: item text for follow-on docs
LMR1M005            Logistics Inv. Verification: Release Parked Doc. for Posting
LMR1M006            Logistics Invoice Verification: Process XML Invoice
MRMH0001            Logistics Invoice Verification: ERS procedure
MRMH0002            Logistics Invoice Verification: EDI inbound
MRMH0003            Logistics Invoice Verification: Revaluation/RAP
MRMN0001            Message output and creation: Logistics Invoice Verification
Regards
Anji
Message was edited by:
        Anji Reddy Vangala

I down loaded iBank on a trial basis and have decided not to use it. How do I delete the program from my Mac

I down loaded iBank to my computer but have decided not to use it. How do I delete it from my Mac

If the application came with an uninstaller, use it. You can also check the developers site for instructions.
But for the most part, just drag the application to the trash. Some applications come with uninstallers under "options" on the installer.
The reason for this is that in Mac OS X most associated files are kept in the application package itself. If you choose any app then "control-click" on it, you can choose "Show package contents" from the contextual menu and you will see all the associated items.
You can also do a Finder or Spotlight search for any other items but they will probably only be prefs which will do no harm and don't take up much room.
These are ususally just plist files in Users/yourname/Library/Preferences . Also some apps will install files in Users/yourname/Library/Application Support. (To reveal this hidden Library go to your Finder "Go" menu hold the option key to choose "Library"
Note: Some apps may also put a file in /Library/Startup Items or SystemPreferences >> Users & Groups >> Login items. (So, it worth a look here too)
EDIT: Snapped by Paul and RD!

Need how to for deleting a snippet using a Mac

Similar Messages

Maybe you are looking for