Need "how to" info to print 1x1 photos for id cards

Hi,
I volunteer to help my team by taking photos of individual players for their league ID cards.
The photos need to be 1 x 1 size so they can be used in the ID cards. 
Any feedback would be appreciated and if I could use 1 sheet of photo paper for all 15 players...
Thanks

Select teh phiotos and crop to 1x1, print them and set printer, paper size and custom print size of 1"x1", if you do not have a page full of photos on the preview click customize and in settings select multiple photos per page which will show them in the preview - click print and make any printer specific selections and print
LN

Similar Messages

  • How can I create a high res image gallery, need to have print res photos for a pressroom section.

    How can I create a high res image gallery, need to have print res photos for a pressroom section.

    If you want Muse to "pass through" your images and not adjust, compress, crop etc - you need to place your images in the lightbox EXACTLY at the right size, pre-cropped and prepped in Photoshop.
    So if your light box is 800x600 the image you're dropping into that must be 800x600 exactly with no effects, rotation etc added to the lightbox frame. This stop Muse fiddling with your images, if they are perfect when inserted and you're not asking Muse to crop, expand, add effects etc. If it's perfect when inserted, Muse SHOULD also leave the resolution alone too, but I have not tried that one, but in theory, it should work.

  • How do I use my own photos for screensaver in Mountain Lion

    How do I use my own photos for screensaver in Mountain Lion.  I cannot see how to use my photos.  It seems that the screensaver is set with factory settings.  There appears to be no alternative.

    Check out 'More like this'    >>>>>>>>>>  (Next to your original post).
    There are several references to this problem ... and some ideas.   Always a good place to look.   Don't overlook the links within the posts.

  • How to modify & use Printer Defination files for Character Mode Report

    How can use & modify printer defination files for changing formats & orientation in character mode report. I donot know how to use printer defination files I tried to set the system parameter (Desformat) but it doesn't work.

    I m also faced same problem that u face,
    If u want to make character mode report so plz follow these instructions:
    1. Set the properties of Report Name Node in Character Cell is Yes.
    2. Change the mode of the System Parameter Mode is Character.
    3. Goto the Layout---> Main Section Properties and set the Character Report Width and Height like 132 and 66
    4. Create Formula Column and write this code "RETURN(CHR(14));"
    5. Goto Layout Model and map this formula column into Header of the Body Like If ur Company Name is "ABC COMPANY" attached with field and map Formula Column.
    5. Goto Printer Definition File DFLT.prt open in NotePad and set width and hieght that u set in Main Section of Report.
    6. At Last u Run the Report with Some System Parameter or User Parameter and View as Character Mode Report.
    In My Case I used EPSON LQ2180 Printer
    So, U Ask More Qustion and u have more knowledge About character mode report Plz Mail me at this address.
    Shahid Shafi
    [email protected]

  • How to configure automatic printing of picklist for an OBD?

    Hi Experts,
    Can you pleae let me know how to configure automatic printing of picklist for an OBD?
    Thanks,
    Shetty

    1. To see whether picking list (EK00) is generated:
    VL02n open the delivery -> menu bar -> extrax -> picking output . 
    Is EK00 there? If not, it means that EK00 is not generated for this delivery.
    If EK00 is green -> it means that it has been printed.
    If it's yellow -> it means that it hasn't been printed yet. Now you have to goto VL70 to print it.
    2. To generate a picking output for one delivery, you have to do:
    [1] In customizing of shipping point, (img -> enterprise structure -> defination -> logistics execution ->shipping point), you have to set picking output  (TVST-KSCHL).
    [2] Item is relevant for picking, and plant/storage location is not assigned to a warehouse.
    [3] Set default print parameter in customizing.  (IMG -> Logistics Execution -> Shipping -> basic function -> output control ->define print parameter -> V4 -> for you picking output type -> assign default print parameter to shipping point ).
    Edited by: Harry Wu on Jul 23, 2010 3:07 AM

  • My word files are all corrupted- when i open 'get info' under "More info" they all have 'Photos for Personal Use or Home Display" and Authors: technology

    My Word files are corrupted. When I open 'Get Info' then 'More Info' I find 'Photos for Personal Use or Home Display' and 'Authors' : Technology. - Nothing to do with the file I'd just written. My most recent files can't be saved or opened.
      Is this Malware or some other kind of attack?  I grabbed photos yesterday from what seem to be freely available pictures online.  I discovered Firevault and Firewall were both turned off. (I hadn't checked before.)  Any suggestions?

    Apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start
    with Option #4 and then #1 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Difficulty printing borderless photos for custom sizes

    I am finding it difficult to print a borderless photo. When I try to print using the photo paper I have it always prints a border (or does not print in the border - so i guess this is called cropped).
    The photo paper is not in the "Paper Size" list of the print dialogue in Preview (or iPhoto). So I specify the size using the "Manage Custom Sizes" option (similar in iPhoto). The size is 89 x 127 mm. In the print preview it looks fine, but when it is printed, a white border (ie, non printed area) crops the whole image. The one side is a 5mm border, with its opposite being 3 and the other two being 3.4.
    I have noticed that when I play around with the Paper size, the standard sizes (like A4) for example, all have a "borderless" option (ie, I can select "A4" or "A4 (borderless)"). When A borderless size is selected certain other options are disabled/enabled. For example, the options under the "borderless printing" 'tab' is enabled and the options under the "duplex printing and margins" 'tab' becomes disabled. This is the exact opposite for when I try and specify my paper size. So perhaps this is a factor. (Even though I would have expected the "border" option set to "none" would mean that there would be no border...)
    So just to save ppls time, this is what I am doing when I print:
    1. The image is exactly 89x127mm (created with GIMP)
    2. I print using Preview (similar results are achieved in iPhoto, but more pain to get there)
    3. I set the paper size to 8.9 by 12.7cm (see note 1)
    4. I don't change the scale (though i have experimented with all options here and nothing seems to change).
    5. I check that Layout > Border > None is selected. It always is.
    6. I change Quality and Media > Media Type to Glossy Photo Paper. (not that this should matter)
    7. I go to borderless printing tab and note that it is disabled. great.
    8. The preview shows no borders and so I hit print, but the borders come anyway (the image gets cropped).
    Note
    I have managed to print borderless photo images with this printer using the supplied photo paper that came with the printer. I don't think i have been able to do it since moving to this new size but I may be wrong...
    Note 1
    When I am setting the size in Preview, I can specify the "Non-Printable Areas". I set these to zero, though I note that the 'canon mp640 series' presets are the exact measurements that is the area that does not get printed.
    Note 2
    In case it has a bearing on the problem, the printer I am using is a Canon MP640.

    I have had some more trials to print without boarders. This time, it was inside of iPhoto. I had made a greeting card and wanted to print to a custom size. but without the ability to select the size as a boarder less size, I was unable to print directly. So instead, I had to save as a pdf > save pdf to iPhoto and then print the image as a photo (instead of a card).

  • I have iPhone 5s. when an incoming call on the screen iPhone I see a small photo, how can I make a big photo for an incoming call?? I have installed iOS 7.1.1

    I have iPhone 5s. when an incoming call on the screen iPhone I see a small photo, how can I make a great big photo for an incoming call?? I have installed ios 7.1.1

    Sorry, you can't. Design change with iOS 7.0. Tell Apple you don't like this here:
    http://www.apple.com/feedback/iphone.html

  • HT204088 how to print purchase history for credit card fraud report

    I need to print my purchase history for a credit card fraud report.  Does anyone know how to do so?  Whenever I click File ---> Print, I only get the first page which contains my basic information.  I've tried a print screen and paste into another document but it does not come out clearly due to the size....thanks! 

    PB Player,
    The iTunes Purchase History does not have a print option.  The best it lets you do is bring up the history a page at a time and print screenshots.  I am sure you can correct the size issue by cropping and zooming.
    It is also possible to get a complete listing emailed to you by making a request to iTunes Customer Service.  If you have more than a few pages, this will be easier.

  • How to configure default Printer Storage mode for specific user?

    Dear all,
    When we try to print something from the SAP, we can manually change the settings of the printing by clicking on the "Properties".
    Inside the "Properties", there is a "Ouput Options", extend it, and we can see a field called "Storage Mode". In my screen, by default it is always "Print Only".
    My question is, if the user A must to change the default to "Archive only", and this change only affect this user A, how can I do this ? O
    Thanks in advance.

    Eduardo,
    Could be a long shot, but in the interest of helping you ... maybe the following ...
    - get ABAPer to create a control table listing user
    - add code in RSNASTZZ that says if entry in control table, then update NAST-TDARMOD with '2'
    Let me know if this helps. If not please revert and will try again.
    Thanks,
    Jay

  • How do I create full width photos for a website with Photoshop - Fireworks - Dreamweaver CS3 ?

    Greetings & Help!
    I'm trying to create a full width photo layout using Photoshop or Fireworks CS3 and then end with Dreamwaver CS3 without the photo's being tall.
    Exactly as the following websites - which all seem to be using the same size of photo or very close to it.
    This site is static with full width photos that are not tall.
    http://www.jenniferhandyproperties.com/selling
    This site is static for the most part and full width photos that are not tall
    http://www.gnvpartners.com/web/
    This site is Flash with full width photos that are not tall.
    expodesigncenter
    I would love to create a flash site just like expo but at this point I would settle for a static photo with the same size being the same on each page.
    Also I would like my site to be a liquid layout so the photo and everything else (text, Links etc) on the page flows correctly.
    The problem...
    I'm trying to use photo's from Istockphoto.com. The size of the photo's they offer are
    425 x 282 px (5.9" x 3.9")
    849 x 565 px (11.8" x 7.8")
    1698 x 1131 px (5.7" x 3.8")
    I'm selecting horizontal photo's. I do not know how to match the same width, height and appearence as the websites I mentioned above.
    If I choose a photo that fits the width then the length is too long. Also if I choose a large photo and have to crop it then most of the detail of the photo is lost.
    I'm attempting to create a mock-up for my web in Fireworks CS3 and after search Adobe and www I came across the mock up should be 1004px which would end up being 1024 with vertical scroll bar and small margins.
    I also have Photoshop & Flash CS3 but should mention (if you haven't already guess it by now) I am a rookie when it comes to creating a website.
    So if you can offer a solution in "Non-Tech Terms" I would appreciate it.
    Thank you in advance for your time.

    In the second example, the photo is set to background with a tile. The other parts are over top of the photo and done with layers with a background color setting.

  • How to disable the print "ALL" feature for users?

    Is there a way to limit the user from printing an entire Adobe Acrobat  document by accident.  We have many documents that are 50 pages and more  and often times, the user only needs to print several pages but because  of CCS (Continual Clicking Syndrome), they blast right through the  print menu and send the whole document to the printer. 
    The easiest way would be to disable the "ALL" feature (radio button) in  the "Print Range" field.  However, I do not know if that is available or  if there is code I can enter in each document.

    It's not possible.
    However, you can create buttons on your document that "help" the user print
    just a part of the document: a certain page range, just the current page,
    etc.

  • How can I duplex print in Word for MAC?

    Although duplex printing works in PREVIEW, I cannot access it in WORD for MAC

    Follow the steps here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c01935823&cc=au&dlc=en&lc=en&product=3204785&tmp​...
    Although I am working on behalf of HP, I am speaking for myself and not for HP.
    Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
    Happy Troubleshooting : )

  • How can I use my own photo for my avatar?

    I notice that some people have an avatar that is not on the table of available avatars.  Is there a way that I can use a photo from my iPhoto library for my Community Support avatar?

    You have to achieve at least 500 points before you are able to do that.
    Award points, level up, and earn new privileges

  • How do i find printer claim code for officejet pro e 8600 premium?

    I am attempting to set up the eprintcenter and it is requesting a claim code.
    The screen does not have web services option.  Please advise.
    I am looking for an easy way to post to a calendar and print daily and weekly.  I appreciate any support you have to offer.

    Hi,
    Please refer link below to troubleshoot the issue.
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c03550536&cc=us&dlc=en&lc=en
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

Maybe you are looking for