Need HP Print driver that works with OSX Lion 10.7.4

I recently got a new modem and I need to update my SSID and password on my HP wireless printer. The printer software that came with the printer and on the hp website for the printer only supports Mac OSX and doesn't work for OSX Lioin 10.7.4
Is there a way to get software that could update my printer or should i remove and somehow reinstall the printer with different software?
Kids need to print their homework....help!

No reason to be sorry,
You should use the Setup Assistant to reconfigure the wireless connection:
Make sure the printer turned on and connected to your Mac by USB.
Go to Applications\Hewlett-Packard\Device Utilities and follow the HP Setup Assistant. it will guide you to connect the printer to your new router.
If you can't find the Hewlett-Packard folder you will need to install the HP software by selecting the HP Recommended Software, the software van be found in the following link:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-107372- 1&cc=uk&dlc=en&lc=en&os=219&product=5061092&sw_lang=
Regards,
Shlomi

Similar Messages

Can anyone recommend a Multi-function black and white laser printer for that works with Mountain Lion? The MFP can be either 3-in-1 or 4-in-1 i.e with fax

can anyone recommend a Multi-function black and white laser printer for that works with Mountain Lion?
The MFP can be either 3-in-1 or 4-in-1 i.e with fax

I bought an epson xp650 a couple of months ago and cannot fault it. It does everything I require and it is the wifi model so I can print directly from my ipad/iphone. Not sure if you are asking about the colour of the unit or just to be able to print black and white, Obviously all printers will print black and white but just to give you a little more info the printer I bought is the white version and it looks really nice sat next to my imac 27''
Hope this helps.

Why won't my secure thumb drive (FAT32) work with os lion?

Why won't my secure thumb drive (FAT32) work with os lion? I have used it ok with older mac operating systems. When the thumb drive is inserted in the usb port, an error message appears stating that the disk was not ejected properly. It shows as readonly in Finder. When I try to eject it, the spinning wheel appears and I have to relaunch finder.

Hi princessmonsta,
Thanks for using Apple Support Communities. This article has some information on things to check if your sound is not working as expected that may help:
OS X Mavericks: Adjust your computer’s sound output
http://support.apple.com/kb/PH13908
Cheers,
- Ari

External DVD Drive not working with osx 10.8.5

Hi, I'm having issues with my MacBook Pro 15" 9,1 working with an external DVD drive. I am running OSX 10.8.5 and have been troubleshooting this issue for a few weeks. The optical drive itself is the original drive that came with the computer, but I have put it in an external enclosure to free up space inside the body of the MacBook Pro. The drive seems to function fine with CDs (playing and ripping - haven't tried burning yet) but is extremely inconsistent/barely functional with DVD playback. Only one DVD in my collection properly works - others bring up error messages in multiple programs (VLC, Wondershare, the native DVD application, etc.) and another continuously loops back to the main menu each time "Play Feature" is selected. These are a variety of DVDs that range from obscure to commercial and old to new (the oldest and most obscure is the only one that works). After deciding that it is not the programs, I replaced the enclosure. I still had the same exact issues. I reset PRAM - no solution there. I created a new user on my computer, installed the same media players and had the same luck. I then used the same external drive on my old MacBook Pro 15" (5,4 running OSX 10.6.8) to see if it would work there. It worked perfectly (with the native DVD application). What is going on here and how can I get my new computer to recognize the external DVDs reliably and consistently?

older superdrives were Hitachi mfg, new ones are Panasonic. Since yours is new and panasonic, indications are it wont work thru the enclosure on your NEW macbook, rather as you state on your older Mac.
until you said it worked fine on the old machine, the logical conclusion is a dirty lens on the laser since it reads CDs fine but most DVD not, since the track is much smaller.
Considering a new superdrive is only $48 on ebay ,or $78 for a new superdrive, your frustration might be too much, and just grab a new superdrive.
Your detailed information indicates a firmware incompatibility of the panasonic superdrive thru an enclosure
This is the new superdrive, made by panasonic as you have in your enclosure:
http://www.ebay.com/itm/like/221280580133?lpid=82
of course thats a lot of trouble buying that AND an enclosure, easier still is just getting a Mac superdrive inside its working enclosure designed for use as such:
http://store.apple.com/us/product/MD564ZM/A/apple-usb-superdrive

Is there an Adobe Bridge CC download that works with osx 10.6.8?

I just signed up for CC. Is there an earlier version that I can download that works with Mac osx 10.6.8 (snow leopard)

I don't use Bridge, but look at this link
Previous via Cloud http://helpx.adobe.com/creative-cloud/help/install-apps.html#previous

Wireless print server that works with Macs and Epson R1800?

Hi,
I'm looking to buy a wireless print server, which I could use as if the printer was connected directly to my Mac. So basically, it just needs to have printing over IP port (like port 9100 on HP JetDirect) and drivers for Mac OS X (or ideally, no special drivers needed at all). Devices that do sharing of the printer only over LPD (older Unix), SMB (Windows), IPP (Cups / newer Unix) or similar protocols is not what I'm looking for here.
The reason why LPD, SMB and IPP are not an option is that I'll need utilities such as Epson Printer Utility to work over the network too.
It looks like Linksys, Belkin and some other have products that allow access to the printer over port 9100 (standard HP JetDiret's port) as if the printer was connected directly to the computer. However, for the most part I was able to find only success stories for Windows users.
Windows has standard driver that allows connection to the printer to be easily switched from USB port to network port. Does OS X comes standard with that feature, or is the special driver needed?
Most importantly, has anybody had success with printing from Mac through wireless print server (any brand) to Epson R1800? Did the Epson Print Utility (checking the ink levels, checking and cleaning the head, etc) work? Any special drivers needed?
Thanks

direwolf has hit the nail on the head - the Epson driver won't work for IP printing. The Epson driver is a Carbon driver, where they build the comm protocols into the driver instead of enabling use of the standard protocols on OS X (that are part of the CUPS system). You'll need a CUPS driver to use the standard network protocol(s). The printfab driver is a CUPS driver.
Exception - the Apple Extreme/Express/etc print servers have firmware that make them work like Macs - Mac-to-Mac sharing works with USB-only drivers! I hesitate to recommend the Extreme/Express, because Apple can't seem to get all the kinks out.

What flash drive will work with OSX version 10.4.11

I have a 2003 i mac OSX Version 10.4.11 with thousands of songs and pictures that I want to back up to save or transfer. The flash drives and external hard drives I have looked at all say they only work on OSX version 5+. What is the best way to save my music and photos?

I'm not sure why a flash drive would say 10.5 and up for the Mac OS. I have three, one bought in January 2012, and they work on all our Macs with USB ports going back to a G3 minitower from 1998 running 10.3.9 to which I added a USB expansion card. Works the same on that relic as it does on our newest iMac quad-core i7
Virtually all flash drives come formatted for Windows. You can leave that formatting to have a cross-platform device if needed or, if you never plan to use it on anything but a Mac, you can use Disk Utility in your Applications folder to reformat as Mac Extended (Journaled), which is how your iMacs hard drive is likely formatted

Hp printer drivers that work with 10.9.4

I had a new hard drive installed on my iMac with OSX 10.9.4. It then would not print to either the HP psc 2510xi Photosmart (USB cable) or the networked HP Officejet 7000, both of which had worked with 10.9.2. I downloaded new drivers from HP and Apple: HP Printer Drivers v.2.26.1 for OSX. When I try to Add a printer I get the message: Can't install software because it is not currently available from the Software Update server. HP support labeled my Photosmart obsolete and sold me an Officejet Pro 8100. Same problem even though it came with a CD with printer drivers. Same messages.

Do you have a backup of your HD made prior to the drive failing? If so go into the HD/Library/Printers folder and copy the "hp" folder into the same location on your new hard drive.
Reboot, go to the System/Printers & Scanners preference pane, remove the printer and add it back again.

Is there a Labview Chroma6310 driver that works with serial port instead of GPIB?

The driver that I have downloaded from NI site is based on GPIB, I need to run it via serial port. I don't have GPIB board. I am pretty new in NI world. How easily can I convert the GPIB driver to serial port (ASRL)? Has anybody already done this? Any help on this is highly appreciated.
Best regards,
Farsh

I haven't looked at the driver and I'm not familiar with the instrument but the conversion should be pretty simple. If it uses VISA for the GPIB communication, the conversion is already done. VISA works with both GPIB and serial - just use the name of the serial port as the VISA reference name. This would be ASRL1 or Com1. If it's an older driver with the traditional GPIB calls, then replace every instance of GPIB Write and GPIB Read with VISA Write and VISA Read. You might also have to add some line terminator like CR/LF to every write. There are a lot of instrument drivers that are compatible with both serial and GPIB. The HP34970 is one that comes to mind. You might want to look at it to see how to do it yourself.

Wanted: 1 TB drive that works with the Airport Extreme (802.11n)

My apologies if this is on here somewhere, but I've searched this forum and googled around quite a bit.
I'd like to connect an external 1 TB hard drive to my new Airport Extreme's USB port.
I have found plenty of info on drives that don't seem to work.
I can add that the drive I purchased (1TB Cavalry CAUM series) does not work.
Can anyone chime in with a 1 TB drive that has been working for at least a few weeks?
Thanks!

According to their website, the NewerTech miniStack should work too.
It has the advantage of having a built in USB hub to attach other devices(i.e.a printer.)
http://www.newertech.com/products/ministackv2_5.php

Looking for a printer/scanner that works with Time Capsule

I recently purchased a Canon MP250 printer/scanner, 1 GB Time Capsule, and two iMac's (21.5 and 27). I connected the printer/scanner to the Time Capsule USB port and it was absolutely trivial to get both iMac's to print to the MP250. My problem is that I can not figure out how to get the scanner to save scanned image files to either iMac.
If I plug the Canon MP250 directly into either iMac, it is trivial to scan. Pressing the SCAN button on the MP250 causes the Image Capture application to launch on the iMac, and then you simply press the Scan button of the Image Capture application.
If it is not possible to scan connecting the Canon MP250 to the Time Capsule, is there another model of printer/scanner that will work as a scanner when connected to the Time Capsule?
Thanks,
Carroll

If it is not possible to scan connecting the Canon MP250 to the Time Capsule, is there another model of printer/scanner that will work as a scanner when connected to the Time Capsule?
The USB port on the Time Capsule will only support compatible printers. It will not support other functions such as copy, fax, scan or maintenance. If you need these services, your only option is to connect the all-in-one directly to a computer.

Can someone recommend a good multi-function scanner/printer/copier that works with Mac OS 10.6.8?

I've just purchased a Canon Image Class MF4570dn. Very disappointed to find that whatever I do I cannot get the scanner to work & the Apple support board is of no help.
It seems like there is a conflict with OS 10.6.8 that does not let the scanner get recognized by any scanning software -- either the Mac native software in Preview or the Canon software included on CD with the box & via download from Canon's site. The Canon software is called "MF Toolbox" but for the life of me I can't get it to start without instantly crashing!
Any suggestions of set-ups that are working with you on a similar system set-up would be much appreciated!

This is discouraging! I ended up trying Canon because my Macbook Pro suddenly stopped recognizing my previous HP scanner -- a MF inkjet printer.
I have been looking at HP multi-function lasers in lieu of this faulty Canon I just returned.
I intend to be doing very simple things with whatever MF unti I end upw ith -- no printing or scanning over the network. I'm happy to connect it directly to my computer via USB. So I'm not sure I'd experience the problems you are having.
Maybe I should go w/ one of these Brother units? Is there anyone on this board that can attest to these machines working with MacBook Pros?
Brother 7360: http://www.amazon.com/Brother-Printer-MFC7360N-Monochrome-Networking/dp/B004QM99 K0/ref=wl_it_dp_o_npd?ie=UTF8&coliid=I15YVL1HDHBT59&colid=RBYVZUYOZJW
Brother 7065: http://www.amazon.com/Brother-Printer-DCP7065DN-Monochrome-Multi-Function/dp/B00 4ULP9QA/ref=wl_it_dp_o_npd?ie=UTF8&coliid=I145LC68RYCBED&colid=RBYVZUYOZJW
Brother 7860: http://www.amazon.com/Brother-Printer-MFC7860DW-Wireless-Monochrome/dp/B004QM99J G/ref=wl_it_dp_o_npd?ie=UTF8&coliid=IK7O05NXDN5B&colid=RBYVZUYOZJW

Need an App. uninstaller that works with Leopard.

I need to clear space on my MBP hard drive and upgrading it's internal drive is way too expensive, if you want to preserve your warranty. (Apple Stores won't do it!) I have an external drive, but I'm trying to use it as little as possible cause its a pain to carry around and set up, plugs and wires etc. So I need to find a good, Leopard compatible, application uninstaller. There are too many to choose from: Clean Sweep, CleanApp, AppZapper, Forklift etc.
What has anybody tried, and what are you happy with, and what seems to find all those pesky hidden files?
I know Leopard is an issue because most of the above apps make mention on their sites of issues they are having when working with Leopard.
Any advise would be greatly appreciated.
Thanks, John
Message was edited by: John Walker

AppCleaner, it's free but just as good as the others.
http://www.freemacsoft.net/AppCleaner/index.php

Does ANY printer work with OSX Lion??

I have a brand new iMac and NONE of my 3 printers will work with it. Yes, I have installed the updates for the drivers. I have communicated with the tech support people for each printer (Canon, HP, and Epson) and none of them can help me. I have tried to use them wirelessly and wired, to no avail. I have installed, uninstalled, and reinstalled. I have tried every suggested idea on the printer websites.
I'm just wondering if there is a printer that actually does work with Lion? I love Lion; wouldn't trade it. But I have to be able to print for my business.
Please help!
Thanks in advance,
Summer

Thank you for all the responses...
Actually, I do know how to add the printer; I am fairly computer literate and have installed numerous printers over the years. I did not have any trouble installing it and adding it to the preferred printer list.
It is definitely in my list of available printers and it is connected; that is not the issue. This is not a "user error" issue or the tech support people would have caught it by now... this is a distinctly Lion-printer issue, hence my original question.
The printer actually starts printing whatever I ask it to; but then it stops halfway through and the tech support people cannot figure it out. My Canon prints beautifully, is the default printer in the printer list, is connected to my Mac via USB and immediately begins printing, but then after a few lines or even after the first page printed, I get an error about communication.
This is what happens with all 3 printers when I try to print.
For those of you who responded that your printer works well with Lion, are you using the newest version OS X v10.7.1 ?
How long have you been using your printer with this version?
The Epson is the printer Apple sold/gave me when I purchased the Mac 3 weeks ago, but I have not been able to get it to work right yet. I am willing to purchase another printer if I know it will work. I am getting too far behind on my business printing...

Need dock extender cable that works with bumpre case

Hi,
Putting a bumper case on an iPhone 4 completely resolves the antenna issue (at least it has for me). The problem is that third party dock connectors such as my car charger won't work with a bumper case because the bumper case is made to exactly fit an Apple manufactured dock cable and the dock housing on my charger is to big to fit. Does anyone know specific extender cables (manufacturer and part number) that will work when the phone is in a bumper case?
Thanks,
Rob

I Had the same problem , went on this site to purshase dock extenders and cables
http://gizmomix.com/shop/accessories/2-extension-dock-extender-adapter-for-iphon e-5-5s-ipad-lifeproof-otterbox-case/
http://gizmomix.com/shop/accessories/dock-extender-adapter-extension-cable-iphon e-5-5s-otterbox-lifeproof-case/

Need HP Print driver that works with OSX Lion 10.7.4

Similar Messages

Maybe you are looking for