Need HP solution center software for hp psc 2110 running windows 7 32 bit

Hi,
The HP Solution Center Software has disappeared since I upgrade my HP laptop OS from Vista to Windows 7 32 bit. I use the HP Solution Center Software for years to create .pdf documents from the scanned documents of my HP PSC 2110 All-in-One printer.
Can you provide the link to download the HP Solution Center Software for Win 7? I searched the HP support website using the product name HP PSC 2110, it pointed me to the driver section; I followed the instructions however there is no link to download the the software.
The printer is connected via USB and works well. It is just annoying I cannot use the HP Solution Center Software (previously HP Director) to copy scanned documents to my computer.
Thanks.
This question was solved.
View Solution.

You are welcome.
You may download it from the following link:
http://sourceforge.net/projects/naps2/files/3.0b1/naps2-3.0b1-setup.exe/download
That means that as an older model its functionality is limited but there are some workarouds available. it surely worth trying.
For a Wirelss printer you will need a different printer indded, there are many factors to consider and recommend you any specific printer, do you have any specific needs? for example would you use a fax or not, I assume it should be a color printer with a scanner... do you use to print photos or use it more often for a daily printing and scanning capabilities, those factors may highly affect any possible recommendation so further clarification will be helpful.
Regardless, any current HP device with a scanner fully support scanning PDF scanning within the HP Software.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

HP OfficeJet 6600 H711g HP Solution Center software for Windows 8.1

I have an HP Officejet 6600 H711g printer. No installatin discs were included with the printer. I downloaded the installation files from the HP website. However, apparantely the HP Solution Center software was not included in the installation files. The HP Solution Center shortcut is located on my desktop but when I access it i get a message that my instalation is not complete. I have tried downloading and installing again (without uninstalling current files) but the Solution Center is still not available. Can somone please help. I'm not sure where to go from here.
Thank you
This question was solved.
View Solution.

Hi,
The HP Solution Center is not a part of the software for the HP Officejet 6600, it is a part of your previous HP printer's software.
From the windows 8 screen type HP and open the HP Officejet 6600 software, the HP Printer Assistant which is the software for your current printer will launch.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Looking for Solution Center software for my Office Jet Pro 8600 All-in-One

I have installed the Drivers and Full Feature Software in order to get Solution Center, so that I could scan multiple photos into individual files. It still does not appear as installed. I have an HP DV6-73680L laptop running Windows 8.1.
FYI, I loaded the software from the link below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-3&cc=us&dlc=en&lc=en...

Maria,
Just checked again...
I do not know whether this will make a difference - I did find this:
HP Officejet Pro 8600 N911a Firmware
Note the description at the bottom of the page regarding the scanning feature. It is unlikely that the exact feature you seek is included. There are times that the description is somewhat lacking in detail.
Click the Kudos Thumbs-Up to show appreciation and say Thanks.
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur

How do i install d110 printer solution center software so it will actually run like is supposed to?

I have been battling this issue for six months with no end in sight!!! I have 3 ACER laptops with Windows 7 Home Premium and an HP Photosmart D110 printer. I installed the software onto all 3 systems and they worked great (for about a month). One of the laptops is still running HP Solution Center very vell but the other 2 allways give me the message that software did not install successfully and the install process does not "find" the wireless printer. I have uninstalled and insalled the software about 25 times with no success even after following the so-called solutions posted by the experts. One of the laptops was returned to Acer for a bad hard drive and when it was returned with a clean Win 7 install, I attempted to install the D110 again (same problem). I can print from all of the laptops but I'm only able to use Solution Center from 1 of them. Any other suggestions before I throw the printer and software disc into the trash? With all of the issues that I've seen on the forums concerning HP printer software, I would think that someone in power at HP would get to the bottom of these issues and patch their software.

Hello raider7
I have some questions that will help with troubleshooting.
What kind of firewall and antivirus software do you use on the laptops? Are they all the same laptop models?
Does your printer have a static IP address set?
Does the software fail when it comes to locating the printer on the network or does it state "The software installation is not complete" when you try to run Solution Center after installation?
If you could, please summarize any troubleshooting you have already done. Did the HP Print and Scan Doctor give any errors or indicate a problem? http://www.hp.com/go/tools
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Solutions Center not working. Photosmart C306g. Windows 7 64 bit. "Parsing Error"

HP Photosmart C306g
Windows7 64 bit
When I click on the HP Solutions Center on laptop to scan, I get the Error message "Parsing Error in file C:\ProgramFiles (86)\HP\DigitalImaging\bin\hpqscloc\1033.xml"
Worked just fine in the past,not sure when it stopped working.
Spent 4 days trying to uninstall & reinstall from internet. Just ordered the cd because I couldnt find mine.

HI Bonnie-Boo,
Here is a link to a post that Travis_C solved an issue for someone with the same error message you are getting. The steps are general so if you need any help or need anything let me know. Also you can find out more about parsing errors here.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Need Working Drivers for Macbook 2,1 running Windows 8 (64-bit) using Boot Camp 5 (Mountain Lion)

So I found my old Macbook 2,1 on Leopard the other day and decided to make it my dedicated Windows computer. I wanted to run Windows 8 on it, so I figured out I needed Boot Camp 5. Then I realized Boot Camp 5 only runs on Mountain Lion, so I went though the process up updating it (had to use MLPostFactor since it's techincally unsupported on my mac.) After getting it updated to Mountain Lion, I went and used Boot Camp 5 to install Windows 8 64-bit. However, when I try to load any Boot Camp Driver Files (I've tried the drivers for BootCamp 3, 4, and 5) it says it is unsupported on my computer model. I suspect this is because of the fact that Windows 8 shouldn't be on my computer. Without these files, I can't right click, among other things, which is pretty important. Can anyone help me get these drivers loaded?

According to the Boot Camp System Requirements located here: http://support.apple.com/kb/HT5634
Your Macbook 2008 does not support Windows 8.
Mac model
Windows 8
64-bit
Windows 7
64-bit
Windows 7
32-bit
Windows Vista
64-bit
Windows Vista
32-bit
Windows XP
32-bit
MacBook (13-inch, Mid 2010)
4
4
DVD
DVD
DVD
MacBook (13-inch, Late 2009)
4
4
DVD
DVD
DVD
MacBook (13-inch, Mid 2009)
4
DVD
DVD
MacBook (13-inch, Early 2009)
4
DVD
DVD
MacBook (13-inch, Aluminum, Late 2008)
4
DVD
DVD
MacBook (13-inch, Early 2008)
4
DVD
DVD
MacBook (13-inch, Late 2007)
4
DVD
DVD
MacBook (13-inch, Mid 2007)
4
DVD
DVD
MacBook (13-inch, Late 2006)
4
DVD
DVD
MacBook (13-inch, Mid 2006)
4
DVD
DVD

C4380 hp solution centre software for mac os 10.9

Just purchased a new Macbook Pro with OS 10.9. I have a HP C4380 printer. I have downloaded the driver software and the printer is working. However, I need to know where I can download the actual "Solution Centre Software" so that I can scan documents etc. Looked everywhere. It used to be available as I have done this before for a windows PC. Very frustrating??

Hi,
The HP Solution Center software is only available for Windows, for Mac there are otehr applications for a such.
Folow these steps to find more about scanning on Mac OS X 10.9 with your printer:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967506&tmp_task=useCategory&cc=us&dlc=en&lc=e...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Q190 and Lenovo Solution Center Software

Is the latest available Solution Center Software compatible with--or intended to be used on--the Q190 "entertainment" PC? My version says I need a driver update, bu they are all current.
The only download source I can find within Lenovo does not list the Q series computers as compatible--yet an earlier verson of SC came preloaded on the machine.
Thanks for any available insight.

Hi Z34jcm,
Welcome to Lenovo Community Forums!
I’m sorry to inform you that the LSC (Lenovo Solution Center) is not available for Q190 Desktop. Below is the link to download the compatible version of LSC, while installing the driver right click on the downloaded file and select “Run as administrator” option to get it installed without any error:
Lenovo Solution Center for Windows 8.1 (64-bit), 8 (64-bit), 7 (64-bit) - Desktops, Notebooks, WorkS...
Do post us back if the issue still persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Adding a 2nd device to the Solution Center software

I have and Officejet 6500 with the Solution Center software. How can I add another HP printer to the software? At one time they both showed up, but I had problems with the driver and when I reloaded it, the second printer was gone and hasn't come back.

Hi,
Since this printer uses a different software it cannot be added to solution center.
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

I have A PhotoSmart C 6180. I can't get the Solution Center software

Where can I find something that will download on 64bit Vista for thePhotoSmart C6180? My harddrive was replaced and my backup did not include the printer drivers. I have loaded everything and it prints fine, but I can not scan as the Solution Center is missing. It says that if the printer is prior to 2011 that the center is not available and the disc won't load on 64bit.
Is there a patch or something that can make this work
This question was solved.
View Solution.

Hi,
if you use the pritner through a USB connection, open the Control Panel and select Printers, right click any instance of the printer and Delete it.
Next unplug the USB and reboot your PC prior installing the printer. (For network connection simply skip to the next step).
Next download and install the following software by following the steps on screen, that will add full functionality as the HP Solution Center software:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-47461-2&cc=us&dlc=en&lc=en&...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Solution Center Software

Hello.   First time post here and have a question.
I have an HP Photosmart 7280.   I have been using this printer for 5 or 6 years.   Have always been happy with it.
I just had to upgrade my desk top computer because of some problems. This upgrade included new hard drive and mother board, consequently also requiring a download of printer software. My upgraded computer is usisng Windows 7. I already have a laptop windows 7 with the HP Solution Center software.
My problem is t hat the new download of the HP software has a major change. No longer is automatic 2 sided printing supported.   All that is supported is manual, left booklet and right booklet. This is not good. In fact it is not acceptable.
Does anyone know how to get the version of HP Solution Cent er Software that has two sided printed supported.   I know this is a recent change because my laptop had this version of the software.
George

Hi George,
Duplex pritning is supported, however disabled by default:
Enter Control Panel > Devices and Printers.
Right click the printer icon, then click Printer Properties.
Click the Device Settings tab.
Set the Automatic Two-Sided Duplex Accessory as installed and click OK to save the change.
Now Automatic Duplexing should become available again.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Why does the solution center prompt for cd every time?

My HP 8500 constantl;y prompts for me to insert the CD each time I try to scan. I have lost the CD, and just paid $10 to get a new one, but it is very annoying! How do I stop this?

Hi Tom,
There is something missing in your Scanning software.
The Solution Center is like a dog with a bone about missing stuff.
Something to try/consider:
See the Solution on this Post - it has the information that might help you correct your Solution Center woes.
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/cannot-open-solution-center/m-p/110924...
If, for some reason, you cannot download new software for your printer as outlined in the above Post,
and you really do not want to wait for your new CD, then you can Uninstall the Solution Center Software from your computer. See the warning below.
Uninstalling your Solution Center:
BE AWARE: If you elect to uninstall Solution Center to make it stop annoying you...Your printer might still work after you reboot and let the computer try and install some standard drivers - HOWEVER, it will only work with whatever "bare bones" drivers are available on your system. It might not work at all. It depends on your Operating system, whether there are enough HP standard drivers for your printer to run the basic printer HP8500 functions, and whether things get tangled up when you uninstall the printer software. It could go well, or it could become a nightmare and you could be more unhappy than you are right now.
The very best scenerio: You find at the Solution Center link a way to download the Full Featured Software for your HP8500 printer and it fixes your scanning error.
I hope this helps.
Say “Thanks!” by clicking Kudos Star next to the Post that helps you.
Mark a Post “Accepted Solution” to say your issue is solved.
Kind Regards,
Dragon-Fur

Windows needs to install driver software for your unknown device

Windows needs to install driver software for your unknown device
This is the message that i get when ever i plug in my ipod touch to my computer. the computer is running on vista. i dont know what to do, because i tried to follow the steps suggested, but it didnt work, the computer said that it couldnt find anything and to check with apple for some driver software. HELP!!!

The iPod touch and iPhone do not use the same type of USB drivers that other Apple devices use. They both require Apple Mobile Device Services to be running. Using this tech article as a guide, you can easily fix this: http://support.apple.com/kb/TS1567

I downloaded the 64 bit version of itunes and plugged in my ipod touch but a sign pops up and says i need the right software for the ipod to connect which is 64 bit. Does anyone know how to fix this problem?

I downloaded the 64 bit version of itunes and plugged in my ipod touch but a sign pops up and says i need the right software for the ipod to connect which is 64 bit. Does anyone know how to fix this problem?

Hi alexanderfrommilton,
First try reinstalling itunes.

Hi, I need a video editing software for my Power Mac G5 system. Hunted all over for one! Can anyone help me and point me in the right direction. Everything I come across is for intel based systems. Many thanks in advance.

Hi, I need a video editing software for my Power Mac G5 system. Hunted all over for one! Can anyone help me and point me in the right direction. Everything I come across is for intel based systems. Many thanks in advance.

I have Final Cut Studio V1 - the PPC/Intel V5/5.1 cross-grade version, which would suit your requirements perfectly. (I have it for sale at present down here).
If you keep looking, you're sure to find a similar second hand copy in your area, without the need to upgrade your graphics card.
I'd go for Final Cut Pro as above over any version of Express. FCP has the full version of LiveType - not the truncated version that was released later on.

Need HP solution center software for hp psc 2110 running windows 7 32 bit

Similar Messages

Maybe you are looking for