Need HP8720C network analyzer Driver for VisualBasi​c 6 or Visual Studio 6

I found the HP8720C driver in labwindows/CVI but i want it for VB

Hi Vatsal,
Not a problem. Attached please find hp8720c.doc. This file is also included in the zip file you have downloaded from our web site.
I hope this helps.
Vesna
Attachments:
hp8720c.doc ‏196 KB

Similar Messages

  • I need free network analyzer software for my mac. we are trying to monitor what software may be running which is causing our internet to fail, although the internet is still coming into our modem.what is recommended?

    My internet keeps 'tripping' at or around the same period time each day.  We have already replaced our modem from our internet provider and we bought a new airport extreme router. We do not believe these were the cause, although we have now ruled them out as a cause.  Everytime the internet fails, our internet provider company tells us that there is still plenty of signal coming into our house. There is something going on inside we believe, and a technician set up our Network Utility to run a continuous ping test to capture information about when it 'trips' againn.  Yesterday, it happened again, and when he checked the data out, he said he is sure there is something 'running in the background' on my IMac.  He advised me to download a free Network Analyzer so he could further investigate what is was that was causing the problem, so I need a free network analyzer software for my Mac. The issue has been going on for a long time, so it is not the new operating system, Lion. This morning, we changed the radio channel from 'auto' to 'manual' and set a new channel, hoping that might help. We are trying to find out what program may be running (even a tiny one in the background) which is causing our internet to fail, although the internet is still coming into our modem. What is free downloadable product is recommended?

    Will Activity Monitor and/or Network Utility, both already in the Utilities folder on your Mac, help in trying to diagnose the problem.
    If you are connecting via wifi what encryption are you using? If you're using the Exteme I doubt that you are using WEP, but worth checking as it seems Macs don't like it and work better using WPA.

  • Do i need a external hard drive for my pictures

    Do I need an external hard drive for my pictures?

    Generally, you should have an external hard drive to backup your system. If your internal hard drive is filling up, you certainly can move pictures to an external hard drive.

  • In need of a printer driver for an HP Photosmart 2710 on Windows 8.1 RT 32 bit.

    In need of a printer driver for an HP Photosmart 2710 on Windows 8.1 RT 32 bit.
    This question was solved.
    View Solution.

    Hi lt12345,
    I understand that you are looking to use the Photosmart 2710 with Windows 8.1 RT, but are unable to locate a driver. In my attempt to locate a driver I have come up empty handed. It appears that this printer is not supported for printing from Windows RT.
    Sorry to be the bearer of this bad news. Regards,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Need SPARTAN 3E board Driver for Labview FPGA 8.5 !!!!!! Thx

     HI!!I need the spartan 3e driver for labview 8.5(not for labview 8.6) for school useI try to download it from ftp://ftp.ni.com/outgoing/NISPARTAN3ELV85.zip
    but this link is dead now. Could somebody send this driver to [email protected] PLZ? Thank you a lot for all in advance
    Solved!
    Go to Solution.

    Hello,
    I'm looking for same (Labview FPGA 8.5 for Spartan 3E). But it isn't available on related url now. I'll be glad if someone can help to find driver.
    Best regards, 

  • I need a floppy disk drive for old 3 1/2" disks. I have a PowerBook G4 Mac with MacOS X 10.4 operating system. What will work for me?

    I need a floppy disk drive for old 3 1/2" disks. I have a PowerBook G4 with Mac OS X 10.4 operating system. What external drive will for for me?

    Hi,
    Providing that the old 3.5" floppies are 1.44 MB HD disks, you should be able to use a USB floppy drive.
    However, if the disks are 2DD/DSDD in the 800K Mac format a USB drive is not going to work. In this case you would need a suitable semi-old Macintosh computer with a built-in floppy drive as an intermediary.
    Jan

  • Need bootable external Firewire drive for iMac G5

    I need an external Firewire drive for an iMac G5 PC with OSX leopard that I can format to be BOOTABLE.  Don't know where to buy one or even if they're available.  I've bought 3 different drives on eBay, thinking each was what I needed, and none were. 
    I'm frustrated.  
    Would appreciate. Any helpful info.

    I use this one:
    http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7H20T64/
    and SuperDuper for creating a bootable clone.
    (But there are others too:  http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB  )

  • Help I need to locate a driver for my soundblaster live 24 bit soundcard

    My son has been given the following PC games for christmas:-
    Command & Conquer 3,
    Command & Conquer Red Alert 3,
    Arma; Armed Assault,
    Medal of Honour: Airborne
    The problem he is having installing these 4 games is this. About half way through installation an error message appears that quite simply states "The software you are installing does not bear a WHQL signed driver. This software will not be installed".
    The PC we are running is a Dell Dimension 900, that we purchased about 4 years ago, and it was bespoke.
    I have run DxDiagnostics and it tells me that the driver for the graphics card is called p7.sys and the sound card are not WHQL logo'd, so how the hell do i download a driver for my soundblaster Li've 24 bit, that does? bear a digital signatre that is WHQL Logo'd. I hope you can help, me please.
    Message Edited by simonwicker on 2-26-2008 2:9 PMMessage Edited by simonwicker on 2-26-2008 2:25 [email protected]

    Re: Help I need to locate a driver for my soundblaster li've 24 bit soundcard? I guess you and your son are currently using windows xp. Well, what you can do is now is ignoring the WQHL pop-up window and choose the "install anyway" option during the installation of the soundcard driver, since WQHL only means the driver is tested by Microsoft and nothing more; drivers without the WQHL qualification does not mean they are bad drivers, they usually works as good as the WQHL ones.
    Ofcourse you can also download the official drivers for the mentioned Soundblaster li've 24bit at Creative Labs support/download site.
    here is it:
    [url="http://uk.europe.creative.com/support/downloads/download2.asp?MainCategory=&Product=035&dlcentric= 025&Product_Name=Li've%2+24-bit&filetype=&OSName=Windows+XP">Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077 (63.39 MB)?[/url]
    The driver is for all Soundblaster Audigy Value, SE, LS and Soundblaster Li've 24bit, since they are all based on the CA-006 soundchip (with other words Creative Labs renamed the soundcard several times). Also this driver should be WQHL-ed (if not, choose "install anyway" option during installation of the soundcard driver). Make sure you have uninstalled the older driver before installing the new one. For troubleshooting use utilies like "Driver Cleaner" or "Driver Sweeper" (google for Guru3D and go to the site and their download section to get the utilities/tools) to clean up the junk files of the older driver that are left in the Windows OS.
    Good luck and Merry Christmas!!!
    Message Edited by CTman on 2-26-2008 0:2 [email protected]

  • Need to download printer driver for 3510 with windows 10

    I need to download printer driver for 3510 with Windows 10

    Here is the link to the Deskjet 3510 drivers.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • I need a Wi-FI driver for Equium A100-027

    I own a Toshiba Equium A100-027 with the Atheros AR5006EG Wi-Fi Adapter.The Laptop is running on Windows XP and I need some software to use the wireless adapter. Could someone help me somehow?
    The Driver had a Genuiune Windows Vista but it was working slow and I've changed the OS to XP.

    All you need is the right driver for WLAN card. Some special software is not necessary because you can configure WLAN using Windows WLAN settings.

  • OCCI for Oracle 9i and MS Visual Studio 2005

    Hello.
    Where do I get OCCI *.lib and *.dll files for Oracle 9i and MS Visual Studio 2005 (VC 8)?
    Roman Perepelitsa.

    I was able to use MS Visual Studio 2005 and OCCi classes. There is a catch though, I was not able to use the debug library dll as it will crash. So I was not able to debug any code using the VS debugger, instead, I use the old and lengthy process: insert printf statements.
    Jeff

  • Does ODT for Oracle XE work on visual studio 2005?

    does ODT for Oracle XE work on visual studio 2005?

    does ODT for Oracle XE work on visual studio 2005?

  • Need networked printer driver for HP LJ 1022N for Windows 8.1 x64

    We've had this printer setup on our Windows 2003 print server for years & now that I'm transitioning to a Windows 2012 print server & Win 8.1 clients, the only driver I'm finding is a host-based driver for usb.  Is there another driver I can use on the print server for this printer?  It wasn't listed in the UPD supported list nor is it in the HP list in the Add driver dialog after updating from Windows Updates.  I appreciate any help you can provide!

    Hello Glorfindel,
    Welcome to the HP Forums.
    I understand your concerns with the Laserjet 1022N. If you're looking for a Windows 2012 print server, then there is no full feature software. Now, for your Windows 8.1, there is a full feature software on the HP website here.
    If you need help install this software over a network connection, then please follow this HP document on Installing the Printer Software in Windows 8.1 for a USB or Network Connection.
    Please let me know if you have any further questions.
    I worked on behalf of HP.

  • Looking for HP8720C Network Analyzer Drivers

    Also I am new to Labview, what would be a better option, to write in Labview or Visual Basic

    Hi,
    Do you mean: "8720C Microwave Network Analyzer"?
    It looks like you have to use the driver for the HP8753 (apparently the same)
    If so, follow this link for the drivers:
    http://zone.ni.com/idnet97.nsf/9b2b33e1993d8777862​56436006ec498/99fd4a9bfc561ba7862568ab005fbb48?Ope​nDocument
    The better option is LabView. Well... That's really a matter of personal preference ;o)
    -JLV-

  • Can I use a network hard drive for time machine

    Can I use a network drive for my time machine back up.  I currently have a 1TB WD AND its full with mostly videos and other back ups?

    Such a configuration is not supported. This does not mean it will not work, but it is not guaranteed to work reliably.
    Considering the "mission profile" for a backup strategy, you should consider this an unacceptable application for Time Machine.
    Read Apple Support Communities contributor Pondini's Time Machine FAQ discussion regarding this subject here:
    http://pondini.org/TM/2.html
    Scroll down to the pink box.
    There are other, significant concerns regarding sharing a Time Machine volume with other content. Time Machine needs to have control of the whole volume.
    More info here: Mac Basics: Time Machine

Maybe you are looking for

  • MSI K7N2 Delta ISLR help :(

    Ive had my current setup for about 5 months now, everything up untill now has run smooth. Yesterday when i woke up i heard my computer makeing this loud noise. when i finaly made it over to the computer i found out that one of my hard drives was spin

  • How to display tables values in next window

    Hello Abapgurus, This is my problem which i explained below.   IF the text has 11 rows and you can only print 8 rows in the current page, THEN go to next page print all 11 rows at the fresh page. How cna i achieve this. Waiting for your favourable re

  • BDT custom SFCs not shown on screen

    We have to set up some custom SFC categories, and I have to create new screens for them so that they are included in claims. According to OSS Note 704333, the following needs to be done (this is copied directly from the note): Enter a new category in

  • Is there any form of system cleanup  for mac air

    is there any form of system cleanup for mac air

  • Description/notes

    Hi all! I have a problem with the text properties: * Description: I modified the description property of the attributes and/or columns and instead of the new text, in the property palette, I see #### since I do double click and open the text editor,