Need http address to stay the same
I have bought our company web address with web forwarding set
up to go to our free ntl web space.
This works fine when you type in the company address. The
problem is if you click on a link on the index page it takes you to
the requested page but the http address changes to show my
unsightly ntl address. I would like to have the company address
showing at all times - so it doesn't update.
I thought the problem might be that I had absolute references
- but as far as I can make out they are all document relative.
I only have one folder - so no sub folders to get confused
with.
The ntl is a directory - so I have framed web forwarding set.
I dont have a host directory specified - could this be a
problem??
Not sure what to look at next?
Appreciate any help...
(working in DWMX 04)
> I have bought our company web address with web
forwarding set up to go to our
> free ntl web space.
The only fix is to get real commercial web hosting, and point
the domain
name's DNS to that hosting.
Domain name forwarding or worse, single frame redirection to
a free host
won't do what you want.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/
Similar Messages
-
My persona stays the same no matter what I try to do...
I have been trying to change my persona to a Halloween persona. I do the appropriate things and press the "wear it" button but the persona stays the same and does not change. Am I doing something wrong??
Hi,
If a horizontal notification bar appears below the location (address) bar or tab bar you can try to '''Allow''' it.
[https://support.mozilla.org/en-US/kb/use-themes-change-look-of-firefox Customizing]
If the problem persists, you can also Reset Firefox and start afresh.
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us! -
I exported a video I finished and when I played it on QuickTime the color was messed up, but I realized I had to enable Final Cut Studio Color compatibility and then it was fine. I'm entering the video to a film festival and I want to make sure if I submit the video on a mini-Dv the color will stay the same as FCP and not as QuickTime without Final Cut Studio Color compatibility enabled. Thanks!
I also need help with printing video to mini-DV
http://discussions.apple.com/thread.jspa?threadID=1910140&stqc=true"If I go to buy one, would a plasma TV be suitable? "
Short answer, No.
Not in regards to true accuracy. The only way to get a true accurate representation is to view the footage on a broadcast monitor. Plasmas are designed to make the footage look as nice a possible, by adding a lot of contrast, brightness and usually warmth to the image. It will look nice - but that is not necessarily accurate. Unless you feel like tinkering in the custom setup menu with various tools to try to adjust the picture or forking over the dough for a studio plasma = $$$$$
Cheers. -
Multiple address books on the same computer: How to
Hi!
I'll get in the near future my wife's iPhone 3G (unless she keeps it and take her 3GS instead) - but want want to be 100% sure we can have separate address books on the same computer. The question is simple: how do we go about that?
Thanks in advance!Hi!
If it's just the address book that should be different: in iTunes, you can specify for each device what it should sync. For your contacts, you can specify in iTunes which contact groups to sync (at least on my Mac using Address Book I can).
Does this mean I need to create separate contact groups in the same address book file or can I create a second file? I'd much rather use the second solution. The first solution would in fact mean creating three groups: "His", "Hers" and "Both". This is a shotcut for contact management nightmares!
Thanks in advance,
Claude -
When I set up my new computer, my internet connection & modem for DSL is the same, so my IP address should be the same. But I had to reinstall Firefox and I can't find the file for my old Firefox profile. If my IP address is the same, is there any way Firefox can recover my old bookmarks?
See this support article: <br />
https://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
Your old Profile is located here in Win XP and W2K: <br />
''drive'':\Documents and Settings\''Windows login user name''\Application Data\Mozilla\Firefox\Profiles\''profile_name'' -
From iPhoto 4 to iPhoto 6, will slideshows stay the same?
Hi, I am new here. I've spent 40+ hours working on some slideshows in iPhoto 4 that I will import into iDVD, set up the menus, and burn to disc, etc. I just purchased iLife 06 and need to know if my slideshows designed in iPhoto 4 will stay the same (i.e. the number of photos, the order of photos, the music) if I do the upgrade.
Please advise!
Thank you,
Michelle
iBook G4 and Sawtooth desktop Mac OS X (10.4.8)Michelle:
Yes they will stay the same. But you should make sure your V4 library is ready for conversion.
1 - do a rebuild of the library. Launch with the Shift-Option-Control keys depressed. It will create a new library in the process.
2 - when you're sure the rebuild library is running OK delete the old one.
3 - make a temp backup copy of your new iPhoto Library folder.
4 - download and run BatChmod on the new iPhoto Library folder with the settings shown here, putting your administartive name in the owner and group sections. You can either type in the path to the folder or just drag the folder into that field.
5 - install iPhoto 6 and update to the latest version. You may have to run the 6.0.4 updater and then the 6.0.5 updater (it only runs on 6.0.4) and the the 6.0.6 which will only run on 6.0.5 it's been reported).
6 - repair disk permissions with Disk Utility
7 - now launch iPhoto 6 with the Option key depressed if your iPhoto Library folder is not named "iPhoto Library" and select the option to find the library. If it is just launch iPhoto normally.
That should help insure a successful conversion to V6.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file. -
Why is my account set-up to download HD? I keep removing the check mark but my account stays the same.
Hi GeoffMichael8319,
If you are having issues with HD content downloading, you may find the following article helpful:
iTunes: Purchasing and viewing HD videos
http://support.apple.com/kb/ht3209
Regards,
- Brenden -
Couldn't add you to the Family plan as your account needs to be based in the same country
I sent a Family plan invite to my wife's email address. After resting her password (perhaps she's not the one who made the account?) she tried to accept the invite by entering the token. She was told: We couldn't add you to the Family plan as your account needs to be based in the same country as the Family plan owner. We checked and both profiles show USA as the country. What's the hang up?
Hi guys welcome!
Can you check if the country of both accounts match? You can check this by going to the Account Overview page.
If one of the accounts doesn't match, then change it to the right country. -
Hi,
When trying with Postman sending a REST call to Azure Storage Queues I get:
The MAC signature found in the HTTP request '***' is not the same as any computed signature. Server used following string to sign: 'POST.
The code I have for creating the Authorization Header:
var accountName = "my_account";
string key = ConfigurationManager.AppSettings["my_access_key"];
DateTime dt = DateTime.Now;
string formattedDate = String.Format("{0:r}", dt);
var canonicalizedHeaders = "x-ms-date:" + formattedDate + "\n" + "x-ms-version:2009-09-19" + "\n" ;
var canonicalizedResource = "/my_account/myqueue/messages";
var stringToSign = String.Format("POST,\n\n\n\n\n\n\n\n\n\n\n{0}{1}", canonicalizedHeaders, canonicalizedResource);
stringToSign = HttpUtility.UrlEncode(stringToSign);
HMACSHA256 hmac = new HMACSHA256(Encoding.UTF8.GetBytes(key));
var signature = Convert.ToBase64String(hmac.ComputeHash(Encoding.UTF8.GetBytes(stringToSign)));
var authorizationHeader = String.Format(CultureInfo.InvariantCulture, "SharedKey {0}:{1}", accountName, signature);
return authorizationHeader;
Anyone any idea what I'm missing/doing wrong?
Additional question: do i have to create for every message I want to send a new Authorization header? Or is there an option (as with Service Bus Topics) to create a header that can be used for a certain timeframe?
Thanks.One issue is with this line of code:
HMACSHA256 hmac = new HMACSHA256(Encoding.UTF8.GetBytes(key));
Please use the following:
HMACSHA256 hmac = new HMACSHA256(Convert.FromBase64String(key));
and that should take care of the problem.
Regarding your question, "do i have to create for every message I want to send a new Authorization header? Or is there an option (as with Service Bus Topics) to create a header that can be used for a certain timeframe?"
With your current approach, the answer is yes. What you can do is create a Shared Access Signature on the queue which will be valid for certain duration and then use that for posting messages to a queue using simple HttpWebRequest/HttpWebResponse.
Hope this helps. -
My iPad, Macbook and Apple TV are all set up with the same iCloud email address. I bought the iPhone 6 and accidentally set the iCloud up with a different email. My phone will not let me change the email address to be the same as my other devices, it tells me that email is already being used. How do I delete the iPhones iCloud account and reinstall it to match my other devices.
Yes it will, just sign out, then sign back in with the correct address.
Settings>iCloud>Sign Out. -
My friend sold me his iPod touch 3 gen 32gb but the problem is it's disabled an it ses to connect to iTunes an when I do connect it ses first I have to enter the password on the iPod but I can't cuz the screen stays the same what should I do
connect it in recovery mode, then set it up as a new device.
-
A friend bought second hand macbook air mid 2011 with crossed circle on the display and give to me to try to recover the system, I tried recovery from partition and same thing occured, after internet recovery it stays the same-crossed circle after reboot, then we tried to boot from USB with mac os 10.8 on it, it installs something,like it has being finishing installation, rebootes, and now it asks for password for boot option.We have no idea what that password could be.What happened!!!
I forgot to write down my computer specs:
iMac 27 Mid 2011
2.7 GHz Intel Core i5
4 GB 1333 MHz DDR3
AMD Radeon HD 6770M 512 MB
OS X 10.9.2 -
How do I set a fixed page size in Muse so that the window always stays the same size
how do I set a fixed page size in Muse so that the window always stays the same size
Hi Aish & thanks for responding;
I would like the window size to stay the same for the entire site and not be
able to scale to drag & scale it. ie 950 pixels x 500 pixels.
Thanks,
JB
On 12/4/14 3:30 PM, "Aishvarya Raj Rastogi" <[email protected]> -
What I'm trying to do is when I scroll down the page have the images that are on the page stay the same look as I scroll
Use the scroll motion tools and set the settings all to 0
-
how do i get itunes or any other program for ipod to play one song and then stop instead of contiuing playing. I need it to be in the same playlist and ready to play the next song when I press play?
Good luck. I tried to do this to cue sound effects for a theater, and never found anything. iTunes will definitely *not* do this, nor was I able to find any player that would play one song at a time in a single playlist.
In my case, I ended up using AutoHotkey to tie individual tracks to the keys on an external keypad. This was an excellent solution for my problem, but I don't think AHK runs on Macs.
One workaround is to make a folder, and fill it with *shortcuts* to the songs you want (ie, the actual files). You can change the names to start with numbers to get them in the right order. Then if you double-click on one it will play just that song. You'll still have to double-click on each song.
Might be a good time to learn AppleScript It would also be pretty easy to write a Java app to do this.
Maybe you are looking for
-
Folks, Can I know how to handle the below request? A supplier will invoice us in a foreign currency and we book the payable on our ledger in the foreign currency. When payment is due, we create an FX wire in the Bank's CashPro system. The payment v
-
Dynamic component interface context mapping
Hi all, I got 2 component A and B. Component A use component B. I would like to know how to set interface context attribute value of comonent B within a view of component A in programatic mode. It should be something like this: wdThis.wdGetComp
-
How to edit character layout for repeat QG
Is it possible to edit the layout for repeat QG that makes each question left aligned? I checked the Prompt Position as Left in the QG level. However when the the default character layout being generated, several Questions stucks into one row and eac
-
Runtime r = Runtime.getRuntime(); r.exec("cmd /c mem"); (Thankyou meadandale, of whom I found this from off an old post.) I need to be able to manipulate the text returned from any DOS command executed in this way (send to system.out, filewriter, wha
-
Hello, intalled is vc 7 on nw2004s on windows server 2003! im using IE6! first problem was that i couldnt find any vcrole, so we deployed vcfiles again. after that the vcrole existed and i mapped it to users and did everything else like it is discrib