Need I upgrade my firmware?

I have a MacBook3,1 White. The version of my firmware is:
Versión de la ROM de arranque: MB41.00C1.B00
My question is: Need I upgrade it or it is the last version?

Here is the link to Apples firmware updates for the last couple of years:
http://www.apple.com/downloads/macosx/apple/firmware_hardware/
glor

Similar Messages

My airport extreme is saying that I need to upgrade the firmware to 7.3.1 but I can't find where to get that download.

I bought a new airport extreme on ebay and it works but as soon as I hooked it up it says I need to update the firmware to 7.3.1 and gives me a link to go to but it won't give me an option for that update. I tried the other updates that it gives an option for but none of them work. Help!

OK, if your Extreme is an original "round" 802.11b/g model you need AirPort Utility 5.6. The problem with that version is that Mountain Lion will refuse to let you install it. Other than that, there is nothing wrong with using AirPort Utility 5.6 and your older Extreme should work just fine with your new MacBook.
This dilemma is easily solved. You simply need to extract the app from the installer package using a package extractor like Pacifist or unpkg. Pacifist is shareware, unpkg is free.
Download Pacifist here: http://www.charlessoft.com/
Download unpkg here: http://www.timdoug.com/unpkg/
Download AirPort Utility 5.6 here: http://support.apple.com/kb/DL1482
When the AirPort Utility .dmg file finishes downloading, open it to expand and reveal the AirPortUtility56.pkg package installer file.
Directions for Pacifist (I do not have screenshots for unpkg but the idea is similar):
Open Pacifist and from its File menu, navigate to the package and open it.
Click the "reveal triangles" until you see AirPort Utility 5.6.app:
Select it and then click Install from Pacifist's toolbar. It will then be installed in your Utilities folder, and you can quit Pacifist.
Mountain Lion will not allow you to delete its existing version of AirPort Utility. Just ignore it. It and the older version (which will bear the unique name "AirPort Utility 5.6") can peacefully coexist. Launch AirPort Utility 5.6 and firmware upgrade options for your older Extreme will be available.
If you happen to have an archived copy of the AU 5.6 app somewhere, such as a Time Machine backup or equivalent, you can simply restore it or drag the app to your Mountain Lion system's Utilities folder instead of resorting to the above procedure. It will run without complaint. It is only the package installer that is the problem.
If you have an older computer with a version of AirPort Utility earlier than 6.0, you can administer it that way as well.

WRT54G - v1.30.7, Jul. 8, 2003 - I need to upgrade Firmware, but can't figure out?

I have looked on bottom where SN is, etc. and there is nothing more than the WRT54G label....no version. The other forums said there was a version after that above the serial number, but I cannot find it.
Can someone help me please? I figure I need to upgrade it so that my PS3 can connect wirelessly to it because every time I try now, the PS3 disables the network entirely and I lose my vonage phone and internet connectivity for the computers until I recycle the modem and then the router....
HELP!

Got to the point of downloading the firmware you listed above and then when going to upgrade the firmware from the file I placed on desktop, and then clicking upgrade....I get a popup stating.....Incorrect Image File!
Now what should I do?
Do I need to do prior firmware upgrades to get to a point this one would be accepted?

Please help, need to upgrade from 9.2.2 to osx 10.4 Tiger on imac g3 400 dv

Hello, I would greatly appreciate assistance to upgrade my operating system from 9.2.2 to osx 10.4.10. I have gotten the firmware upgrade installed to 4.1.9. Can anyone tell me what else I need to upgrade to have this computer able to install Tiger 10.4, on an imac g3 400 dv slot loading.....
Right now when I try to install the disc 10.4 using the option key at restart, it wont load the install disc. Any help would be appreciated , thank u in advance!!!!!!!

Hi, thank u for responding, my harddrive is 10 gigs, and my memory ram is only 64 megs, I ordered 2 512 mg from 18004memory.com and it didnt work , the computer said there was a memory issue. So I returned the memory back to 18004 memory.com...... I will neve ruse them again , because on their website they stated its guranteed to work and is compliant with imac 400 dv. They stated they will send me another set from another manufacturer, but to return the memory first.....
I know I meet all the requirements for tiger , except for the ram which apple says I need 256 mg,
But I was referring to any firmaware upgrades or bios upgrades or any of those type of programming upgrades to ready it for tiger, I know I installed the 4.19, and went from os 9.0 to its current 9.22, I think that alone was 5 upgrades. I think I might be missing an upgrade or maybe not. I will run the utility u posted and thank u for that.....
Apple told me that I can installl tiger 10.4.10 on this computer.
The install discs I bought on ebay state imac MAC osx install disc one and there is and install disc 2, it says AHT VERSION 3A127, and dated as produced in the year 2007. it colored grey , but doesnt have the black X like someone else posted it should have
Oh and it does open the files in 9.22, it does mount, and it does have folders,
Thank u for ur help as I progress to ultimately saving this imac....
many thanks!!!!!!!!!!!!!!!!!!

Cannot upgrade the firmware.

I am using a BEFW11S4 router Version 4. When I checked the site and after a full day of messing around I found that the problem I was having was covered in the latest update. I downloaded the bin file and tried the upgrade process from the router management. It failed. leaving the router still working but still with my original problem. Went to user groups and read what i could find. I turned off virus program, firewall and connected directly to internet to download bin file. (did this 4 times) tried again. failed. still did not upgrade the firmware and read more and downloaded the utility It could not access the router - Login failed. tried to login to router and logged in fine. spent another 4 hours trying to find any other suggestions either on the linksys site and in the forums and could not find anything. Keep in mind I have been using cisco products for about 20 years now and I am fully qualified Network technician. Please don't annoy me with any more simplistic suggestions I need a workable solution since I have about two or three hundred of these types of units out there. My interim solution was to go to staples and pick up a $49 Belkin router that works just fine. The solution suggested by the linksys person on the phone was to pay $29 to maybe resolve the issue. can anyone see the economics in that?
P.S. went to the lela download link in the message at the top of this forum. It says to download lela click here. Did so and got a really nice demo. there was no download. so if anyone knows where to download that it might be worth a try.
Message Edited by tekkiefirst on 07-17-2008 03:22 AM

Try upgrading the firmware of router ... reset it & reconfigure it ... if it works ... that will be fine if not ... then possibly the router is gone bad ...

I have a MacBook Pro book running OS10.5.8 and need to upgrade to 10.7. Do I have to update all other versions inbetween or can I go from 10.5.8. directly to 10.7?

How do I upgrade my MacBook Pro from OS10.5.8 to the lastest software, which I believe is 10.7?
This is a company computer and the guy who had it before me never kept up with updates. Now I have some audio hardware whose software will only operate with 10.7. Do I have to upload all versions between 10.5.8 to get to the lastest firmware or can I go directly from 10.5.8 to 10.7? I've downloaded the 10.7 upgrade from the apple web site but when it finished downloading I received a message stating that I needed earlier software.
If I need to go through all of these other versions, where to I find them all and how many are there please?
Thanks

To upgrade from Leopard to Lion or Mountain Lion - you need to upgrade your current OS to Snow Leopard...
You can call Apple and order Snow Leopard and after you've upgraded to Snow Leopard, you can decide from there if you want to upgrade to Lion or Mountain Lion.
If you want to upgrade to Mountain Lion, click HERE to see if your Macbook is supported by ML.
good luck

FAQ Broken: How do I upgrade the firmware on a WRT54G Wireless-G Broadband Router?

I tried to view the above question in the FAQ, but it goes to the answer for a different question.
I then tried "How do I upgrade the firmware on my router?" a little further down,
but it acts like I'm not authenticated, and won't accept my Linksys Forums e-mail address
and password. When I try the password recovery, it says my e-mail address is invalid.
Can someone please point me to instructions for upgrading the firmware on my WRT54G?
Specifically, someone told me that the router needs to be listening on the default 192.168.1.1
IP address, but mine is listening on 10.1.1.2. Do I need to change this just to flash new
firmware, because that will be a little painful.
Thanks,

Go to website linksysbycisco.com/downloads.........insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - "Default Gateway of Your Router"...Leave the Username blank & in Password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
**To Check the Default Gateway of the router...Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
**To all the above setting using the wired computer.

Itunes won't detect ipod touch after upgrade to firmware 1.1.4

I am in desperate need of help. My 16GB Ipod is no longer being detected by iTunes.
I decided to upgrade the firmware to 1.1.4. through iTunes. The update wasn't interrupted and i can see no issues during the procedure. when the update was completed, my iPod had no content in it and it wasn't showing up in iTunes.
Here's what i've tried so far to correct this:
- Uninstalled iTunes and all other apple related software and then re-installed
- tried different USB ports on my laptop
- Reset all setting within the ipod
- Run the iTunes diagnostic. It error's out during the sync test.
I've tried to find any other similar example on other sites but haven't been successful.
Please help.

These are other hints http://www.copytrans.net/helpcopytrans.php#22
That might help.

Best Practices for Upgrade UCS firmware from 2.0 to 2.2?

Hi
I have Cisco UCS system ( 2 FI, 4 Chassis with 32 Server ) running 2.0 firmware. Now I want upgrade to 2.2. When I check document "Upgrading Cisco UCS from Release 2.0 to Release 2.2", I see have 2 solution:
- 1. Upgrading from Release 2.0 with Auto Install -> Step simple but all server reboot at same time.
- 2. Manually Upgrading from Release 2.0. -> Step more complex but can upgrade server one by one.
My question:
- Can I "Upgrade the infrastructure firmware with Auto Intall but upgrade Server with Manual"?
- What is best for my case?
Thanks

Hi Phamcongtuan,
In UCS you can create host firmware policy that can be used to upgrade the firmware of your blades. Once you upgrade the infrastructure firmware, you can apply the host firmware policy to the service profiles of your blades. If you are using service profiles templates you will need to unbind the service profiles and apply the policy to the individual servers.
Host Firmware Package
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/firmware-mgmt/cli/2-2/b_CLI_Firmware_Management_22/b_CLI_Firmware_Management_22_chapter_01000.html#concept_6982A188474A452CBFDBBDD7DD4921F3

What file do I use to upgrade WRT54GL firmware?

Just got a new WRT54GL wirless router and am interested in how to upgrade the firmware. Downloaded WRT54GL_v4.30.9_US.tgz from the Linsys support/download website. It's a zip file that contains WRT54GL_v4.30.9_US.tar which is another zip file that contains the source files. But there's no compiled file. Where can I get an executable that can be downloaded to the router?

You'd have to ask Linksys that question....but if the firmware for the 1.0 and the 1.1 are the same, they may just have forgotten to update the page...or they may just consider that if there are no firmware updates for the 1.1, why bother posting it...after all, no one should ever need to re-flash their routers, right??
Tomato 1.25vpn3.4 (SgtPepperKSU MOD) on a Buffalo WHR-HP-G54
D-Link DSM-320 (Wired)
Wii (Wireless) - PS3 (Wired), PSP (Wireless) - XBox360 (Wired)
SonyBDP-S360 (Wired)
Linksys NSLU2 Firmware Unslung 6.10 Beta unslung to a 2Gb thumb, w/1 Maxtor OneTouch III 200Gb
IOmega StorCenter ix2 1TB NAS
Linksys WVC54G w/FW V2.12EU
and assorted wired and wireless PCs and laptops

I need to upgrade to mac os snow leopard from 10.5.8, and have the lion OS usb. I can't upgrade to snow leopard as my father doesn't remember the admin password. If anyone can help it would be appreciatedeas

I need to upgrade to mac os snow leopard from 10.5.8, and have the lion OS usb. I can't upgrade to snow leopard as my father doesn't remember the admin password. If anyone can help it would be appreciated

Restart with the Mac OS X 10.6 DVD in the drive or with the Lion USB drive connected, hold down the Option key just after the restart, tab to the installation disk, and press Enter. If the computer has a firmware password set, it needs to be provided for this to work.
(66822)

TS3694 Im trying to upgrade my firmware to iOS 6.1.2 by restoring my iPod. I really don't want to upgrade to 6.1.3. I've tried to use the shift + click restore but i gets error (3194)

Look im on iOS 5.1.1 iPod Touch 4G 8gb and on iTunes 11. Yea i need to upgrade to this firmware but i can't do it via itunes beacuse it tells me to upgrade to 6.1.3. Ive got the 6.1.2 IPSW file already

As always, you can ONLY update to the latest available version.
Sorry

Help very Need WRT 54G V7, firmware 7.00.6

Help very Need WRT 54G V7, firmware 7.00.6
I updated to 7.00.8 and now device work not stable
WhenI have 7.00.6 firmware it work not bad.

Well its not possible to restore the earlier firmware back on your Router. Since you have already upgraded the firmware on your Router, Have you resetted your Router and re-configured all the settings on it again? Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

Upgrade g5 firmware

Hello I just install a new OS 10.4.11 on a Mac pro 2005 model dual 2.3 Ghz Power PC G5 with 2 gh memory and I need to upgrade to leopard...I had the installer DVD 10.5 leopard. to upgrade do you need to do anything else like (firmware) and if yes how.

Firmware questions would be best asked on the appropriate hardware forum since pople here are running Tiger under lots of different hardware configurations which don't match yours. That would go double for a Leopard issue since some of us in Tiger forum still haven't used Leopard, whereas there are undoubtedly lots of people running your hardware and Leopard on the right hardare forum.

Need to upgrade phone

i need to upgrade my version on my iphone but the PC i formatted it from at the moment is broken and will be until ive got the money to get it fixed properly, however i was wondering if there is a way of upgrading it on a seperate computer without having to lose all my music from it? and without having to buy 3rd party programes to get my music from my phone onto my PC?

You can install a firmware update using another computer, but if something goes wrong with the process for whatever reason, all existing iTunes content on your iPhone - all music, videos, podcasts, and 3rd party apps could be lost. iTunes on another computer will create a backup for your iPhone as the first step during the firmware update install process but the iPhone's backup does not include all data on your iPhone. The backup does not include any iTunes content and it doesn't include any photos that were transferred from your computer.
iTunes includes an option to transfer iTunes content that was purchased/downloaded from the iTunes store from an iPod or iPhone, but this is for iTunes content that was purchased/downloaded from the iTunes store only, and you need to authorize the computer with your iTunes account with iTunes before doing so. To transfer iTunes content that was not purchased from the iTunes store, you must use a 3rd party utility to transfer this data from an iPhone to your computer if not available in your iTunes library on your computer.
Your iTunes library should be included with your computer's backup along with all other important data. Using the steps included with this link, you could transfer your iTunes library to another computer temporarily or use the external drive as your iTunes library when connected to another computer.
http://support.apple.com/kb/HT1751

Need I upgrade my firmware?

Similar Messages

Maybe you are looking for