Need IDE for Mac OS Jaguar

I have recently made the switch to Mac from Windows, and everything works beautifully for me except for one thing. I can't find any programming tools for C. I would love to use Xcode, but I don't have Tiger, and I don't plan on upgrading. What alternative IDEs could I use?
Quicksilver 2002 Mac OS X (10.2.x)

It's only a big risk when your hard drive crashes or suffers file corruption. A backup is always a good thing to have. I always install a second hard drive for each computer and maintain a regular backup for each one.
You can easily clone your system to a second drive using the Restore option of Disk Utility:
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the backup or destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
6. Select the startup or source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
8. Select the destination drive on the Desktop and press COMMAND-I to open the Get Info window. At the bottom in the Ownership and Permissions section be sure the box labeled "Ignore Permissions on this Volume" is unchecked. Verify the settings for Ownership and Permissions as follows: Owner=system with read/write; Group=admin with read/write; Other with read-only. If they are not correct then reset them.
For added precaution you can boot into safe mode before doing the clone.
You can then use a third-party backup utility to maintain the clone with incremental updates. Some good choices are:
Retrospect
Synchronize! Pro X
Synk 6
Deja Vu
All work with Panther and Tiger and can perform both full and incremental backups as well as maintain bootable clones.
I agree, if all your software works fine there's no need to upgrade unless upgrades provide new features that you can use.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Similar Messages

Does OS Lion need flip for mac

new IMAC OS LIon 10.7.3 - can't seem to find out if it needs 'flip for mac'?

Only if you wish to view .wmv files, otherwise it's not really needed.

I accidentally purchased Adobe Photoshop and Premiere Elements for Windows, but I need it for Mac. Please advise.

I accidentally purchased Adobe Photoshop and Premiere Elements for Windows, but I need it for Mac. Please advise.

Return, cancel, or exchange an Adobe order

Do we need antivirus for mac book pro?

do i need antivirus for mac book pro?

No.
See Here > Antivirus Discussion
More Info Here...
https://discussions.apple.com/thread/4545776?tstart=0
Mac OS X tends to look after itself...
To keep your Mac Happy...
See Here...
http://support.apple.com/kb/HT1147
http://www.thexlab.com/faqs/maintainingmacosx.html
Mac OS X: About background maintenance tasks

I need itune for mac g5 10.4.11

help i need itune for mac g5 10.4.11

iTunes 9.2.1 is the latest that will run on OS X 10.4.11. Get it here > http://support.apple.com/kb/DL1056

C/C++ IDE for Mac

Hello there. Is there any C/C++ IDE for mac that is not Xcode or NetBeans? NetBeans always corrupts my files. I do not like Xcode. Any suggestions?
CB223

Some suggestions at …
http://stackoverflow.com/questions/220644/c-ide-for-macs
For reference they mention…
Eclipse
Code::Blocks
Mono
Emacs
TextMate
Wikipedia has a list too…
http://en.wikipedia.org/wiki/List_of_Macintosh_software#Developer_tools_and_IDEs

Need Bridge for Mac to download software update for Xperia Z1?

Trying to update the software, but the only instructions it has are to download Bridge for Mac? How do I do this if I don't have a Mac computer? I'm WIndows. Thanks.

You need PC companion:
http://www.sonymobile.com/gb/tools/pc-companion/
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Need Ideas for Minimalist Website and Image Gallery

I am looking for ideas for creating a minimalist online image gallery/portfolio? I want to either use html for the site and then flash for the portfolio images or some other method. I want to click on the thumbnails and then a large image will open.
Should I use Flash, Dreamweaver, Would it be easier to load the images dynamically to a folder. Does anyone have an example they could show me. Thanks.

I second Mahendra's suggestion for JAlbum Excellent product! Just so you know, you don't need to use their image hosting. Simply download the software and install it on your PC. The beauty of JAlbum is that it generates thumbnails and HTML pages for you from your folder of images. Lots of different Skins available. CSS can be customized. And you can't beat the price.
Minimalism is nice but on the web, if you don't have some real text in the HTML markup you're essentially invisible to search engines, language translators and web assisting technologies like screen readers. I realize this is a portfolio, but you want to maintain some degree of visibility so people can find you. For this reason, Flash sites don't do well. HTML is preferred.
Good luck with your project,
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Help need driver for Mac Yosemite 10.10.2 for LaserJet Pro Color...

Please help me find the driver for the HP LaserJET COLOR PRO 200 FOR MAC OXC 10.10 YOSEMITE
This question was solved.
View Solution.

This should be what you need
Driver for for OS X 10.9 Mavericks and OS X 10.10 Yosemite
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-125410-4&cc=us&dlc=en&lc=en...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Need iBooks for mac!

I guess this is more a comment than a question. I can't believe there isn't an iBooks app for mac! I have iBooks on my I-Phone 4, and was astonished to see, after purchasing a book on my phone, that there's no companion app that will allow me to read it on my macbook.
I can purchase books from amazon and read on either my phone or my macbook through the Kindle App. So why should I purchase books from Apple's iBook store?.....
Apple, are you listening?

LexSchellings wrote:
Reading Books yes.
You need to understand that most people who are asking this question want to read best sellers and other paid-for books from the iBookstore. They are not interested in free books or pdfs. Aside from a very few publishers which do not use DRM, it is NOT possible to read a paid-for iBook on anything other than an iOS device. This is very, very annoying to huge numbers of people. The same problem does not exist if you buy a book from Kindle, Nook, Kobo, or Googlebooks.
Every purchase page in the iBookstore actually says right on it that an iOS device is required (even in the few cases where this is not true, because there happens to be no DRM).

Best Simple IDE for MAC OS X

Hi all,
I am just getting started in Java... I am going to take a class at the community college. I want to do my work on a iMac running OSX... I installed Net Beans and while it is nice it seems liek it does way more than I need to start with... I am really llloking for something that will allow me to code with the proper indents and color coding. It would be nice if it would compile and run programs for me but it is not necessary... I want to do the coding by hand... I do not want the IDE putting loads of crap into my programs... I am going to look into Jedit when I get home... It sounds good and light... Any thing else to look for for a OSX user on a budget?
Thanks!

Though not referred to very often, Mac OS X users can use Project Builder in the developer tool kits, which also offers a occasion to develop standard Java tools.
As for emacs: If you would like to know about emacs, open Terminal and enter the command
[~]username% man emacs
or, enter the command
[~/<>]username% emacs <java file>.java
where <java file> is a java file name which you saved in the current directory.
(When exiting emacs press "control"+"x"+"c" and then "y" if saving the change.)

Need ideas for plug-in re-design

My DAQ app uses "Plugins". A Plugin is a VI which conforms to a particular terminal configuration.
Here is the complete diagram of a simple one:
The idea is that a plugin is another channel: This one takes the value of TORQUE (in N-m) and the value of SPEED (in RPM), performs some computation, and produces a result POWER (in kW).
The user can then think of this as just another channel - it shows up in the datastream and the user can plot it, record it, set alarms on it, convert it to an output and send it out the CAN bus, anything he can do with a real channel, he can do with this plugin channel.
So the above is exactly equivalent to having a POWER transducer.
They can get much more complex than this.
My code organizes these so that the prerequisite channels are run first, and then the dependent ones. (a prerequisite channel could also be a plug-in).
If plugin B depends on plugin A as a prerequisite, I make sure that A runs first, regardless of which comes first in the CONFIG file.
So the actual DAQ code samples the hardware channels, and then the plugins in a particular order.
The DAQ is sampling at 10 Hz, and so these plugins run at that rate too. There may be 100 different plugins, maybe 50 at a time in one test.
The DAQ runs on a PXI box, running RTOS. The host is an ordinary PC, running Windows.
Even though the PXI is running a compiled RTEXE, it still loads the source-code VIs and runs them.
My data file includes all the recorded data, all the config stuff used to set that up, AND THE PLUGIN VIs THEMSELVES.
The plugin VI files are read as strings and stored in the datafile as strings, along with their names.
When reading a data file, I read this string, and store it in a "sandbox" folder with a .VI extension.
This guarantees that the version I have is the version the data was originally recorded with.
The user can EDIT the data files, for example changing the scale factor on the SPEED channel from 307.3 RPM/V to 308.5 RPM/V.
That causes a re-calculation of the SPEED channel.
It ALSO causes a re-calculation of the POWER channel: My code detects that POWER depends on SPEED and since SPEED changed, I have to run every sample back through the POWER VI to get a new value. (Remember they're not all as simple as this example).
THAT is why the VIs are stored in the data file.
ALL OF THAT WORKS.
100%
Like a dream.
For 8-9 years now.
EXCEPT...
When it comes time to change LABVIEW versions.
MY client has 10,000+ data files, each with 5-50 VIs embedded. Files are spread among 30+ machines, with a central server backup.
We need to hang on to this data.
I have a File Updater, which will take datafiles and update them (they are a DataLog file).
THE TROUBLE IS:
If I take a recent datafile, recorded with LV2010 (where we've been for 3+ years) and open it with the EXE built with LV2013, there's a problem if it tries to reprocess it. The error comes out as
Error Code 1126 occurred at Open VI Reference in HDT Open PlugIn.vi->HDT Find Calc Prerequisites.vi->HDT DataFile Prerequisite Manager.vi->HDT DataFile Viewer.vi->HDT.vi<APPEND>
An error occurred loading VI 'BSFC.vi'.
LabVIEW load error code 10: VI version (10.0) is too old to convert to the current LabVIEW version (13.0).
The EXE code, having no COMPILER handy, cannot use the old VI.
My FILE UPDATER, has a recompiler built into it (it reads the VI string, saves it as a VI file, opens it as a VI, saves it as a VI, then reads it as a string and puts it back where it belongs.
But if THAT is built into an EXE, it doesn't work either. Same problem, same error.
If I run the FILE UPDATER from the LV2013 DevSys, then it's OK. The re-compile process works fine, and then the EXE can read it and use the VI.
BUT:
1... That's painfully slow. I have a cache handler where I recompile each VI only once and recognize it if I see it again, but still it's a long process.
2... That doesn't work from an EXE. My client has 2-3 DevSystems and 30+ computers with just the EXE. But that's where the data files are.
3... Backup up Data Files on CD or DVD doesn't work.
SO............ TO make a long story even longer.......
I'm looking for an alternative.
REQUIREMENTS:
1... String-based, I suppose. I want to type in "Power = Torque * Speed / 9545" and have the code know to fetch the value of "Power", the value of "Torque", do the math, and produce the result.
2... Has to execute quickly. I have a zillion things to do at 10 Hz.
3... Has to be able to re-order itself. If I have ANOTHER plug-in channel called Fuel per Watt, and it calculates "FuelPerWatt = FuelFlow / Power * 10.34", then it has to know to execute POWER before it executes FUELPERWATT.
4... Musr work from an EXE and an RTEXE.
I've looked at a thing called MathToG, and it works OK for creating a VI from an equation, but it needs VI scripting, and therefore won't work from an EXE
Any ideas?
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks

Starting at the top, create a class which has no data and two methods - GetPrerequisites and Execute. Both are dynamic dispatch (use the right-click option in the New menu in the project to create them).
GetPrerequisites - has the input and output of the parent class so it is dynamic dispatch, and has a single output which is an array of the same class. You may want error I/O as well.
Execute - has the input and output of the parent class so it is dynamic dispatch, and has Result and Units outputs. The prerequisites output is redundant with the previous function, but can be added. Again, you may want error I/O.
In the parent class, both of these functions are essentially empty and return default data. The parent class is used for a template and to provide a parent for the function classes. As such, set the properties for each of the methods so that children must override them (do this in the class properties dialog box). Set these up the way you want them up front, since the children must use the exact same connector pane.
The functions themselves are all created as follows:
Create a class
Change its inheritance so it inherits from the parent class - it is now a child
Use the new menu on the child class to create functions to override the originals
Delete all code but the terminals in the child functions
Change the GetPrerequisites code so it returns a constant array of the prerequisite objects. These will be parallel children of the original parent class. For your power class, this would be an array containing the torque and speed classes. The easiest way to create this array is to drag a copy of the torque and speed classes onto the block diagram and use build array. They will be "coerced" to the parent class, but LabVIEW still knows what they are.
Change the Execute code so that it does whatever it needs to do. In general, use the GetPrerequisites function to fetch the prerequisites. Use a FOR loop to run the parent Execute function on each of these prerequisites. Dynamic dispatching will execute the correct code. You now have an array of the results. Use this, with whatever other functionality you need, to calculate your final values.
The prerequisites can be dynamically loaded so you do not have a static link to the prerequisite classes. If you would like to have a text interface, you can dynamically load the individual functions, then use their values in a LabVIEW formula VI for the final calculation.
If this is still Greek, you may want to walk through the examples of LabVIEW classes and dynamic dispatch to get more background on how to use classes.
If you would prefer a text string for your units so that you have more flexibility, let me know. I have an SI unit string validation VI that may be of use. It works for most unit combinations, provided they are not nested too deep.
This account is no longer active. Contact ShadesOfGray for current posts and information.

Need ideas for a validation concept

Hello,
I am a bit helpless about validations on my page!
I have a page with a lot of items, which are particularly filled with AJAX.
When a button is pressed these items should be validated before a page process runs. And of course if a validation fails the process should not run.
The problem is that the error messages of the validations should be displayed in a javascript box and not in the notification area.
Further I was not able to call a javascript function from a button and the process only runs if the button was pressed an the javascript validation function returns true!
And one more problem is that the items are filled by AJAX and because of that the value of these items are sometimes different when I try to reference them in the page process to validate the items.
So I have no idea to create a good validation concept, which creates a javascript box when a validation fails and the page process only runs if all validations return true.
I hope you have an idea, how I can do that!
Thank you,
Tim

Hello Tim,
Validation, especially in a web application, should be a two phase process. The first phase should be on the client side, and there you can use JavaScript, especially for the non-db related validations like not null, valid date, numbers only etc. The second phase should take place on the server side, after page submits, mainly because in the "way" from the client to the server things can be changed and tampered with.
The fact that you are using AJAX doesn't change this practice. Even if you are using select list (and radio groups or checkboxes are on the same category), based on dynamic LOV, do not assure you that the selected values, received by the sever, are legal ones.
You can use Andy's example for client side validation, but you'll also need server side validation. You should check Patrick blog on that one.
" The problem is that the error messages of the validations should be displayed in a javascript box and not in the notification area."Why? Server side validation results (at least the built-in ones) can't be displayed in JavaScript boxes, as this is a server side process. APEX practice is that failed validation stops the page processes, so nothing can be changed as long as you have items, which didn't validate correctly. I believe Patrick's solution presents the validation errors in a very friendly manner, although not in a JavaScript box.
" And one more problem is that the items are filled by AJAX and because of that the value of these items are sometimes different when I try to reference them in the page process to validate the items."You should give us some more specific details on the way you are populating the item, and the page process (and fire point) you are using. In any case, it is possible that your page process relies on session state, and just using AJAX don't necessarily update session state. In these cases, maybe you should initiate session state updates, prior to submitting the page.
Regards,
Arie.

Need Ideas for creating and using Custom Business Object

Hello Guys,
I am developing an application which uses a Request->Approve->Create approach for creating Purchase documents.
Now I am a little puzzled about how to make use of the Business Object BUS2014.
The application I am developing has its own unique 'Request Number' (say REQID) which will point to the Request for Creation of a purchase order.
Whenever a Request is created (from a Z-Tcode) a workflow needs to be initiated and it has to be sent to the approver.
The Purchase Document will be created once the approver approves.
Now my confusion here is, if I use BUS2014, the object will be instantiated only during the final step of the workflow. But I need an instance during the beginning of the Requestor ->Approver negotiations as I am playing with events. These events needs an Object_key.
How should I proceed here?
Should I create a new logical Business Object like ZPOREQ where I have the above mentioned REQID as the key?
And should I have an attribute of type BUS2014 inside the custom BO?
How will I make use of the methods like BUS2014.Create etc which I may need to create the purchase document?
Any small direction will be a huge help for me to get used to this wilderness.

Hi,
You should continue with the ABAP class idea. The business objects are kind of "obsolete" already, and if there is a need to create a new "object", ABAP classes are the way to go. Business objects are still useful, but I normally use them only when an existing standard business object fulfills the requirements (possibly with slight additions) which is almost never.
From my point of view you can use the existing class. Depending on the circumstances I normally have just one class that I use for both workflow and the possible other functionality that is required, but you have to understand that I have this goal in my mind already when starting the development process. As your class most probably has many useful features already (such as you have the header and item data as attributes etc. (if I understood correctly?), these are also useful in in workflow (class attributes will be available in WF container etc.).
If you are hesitant to use the same class directly in your workflow, you could also create a new class ZCL_REQUEST_FOR_WF (with the workflow interface), and then simply add your existing class ZCL_WF_REQUEST as an attribute to this new class. Then this new workflow class could include the pure workflow stuff, and your existing class the non-workflow stuff. But this most probably will not make much sense - just implement the if_workflow interface in your existing class (this is just one possibility that you might consider.)
Regards,
Karri

I Killed Quick time (going to reinstall OSX and need ac3codec for mac)

Hi,
I killed my quick time. I have a video file I want to play (a project I'm working on with others.) anyway, it has 5.1 audio. The video plays, but no audio. I put the file on the XP and still no audio. I played it on Divx player. It says I'm missing Tag 8192.
So after a quick Google, i get ac3codec for the XP, install... and i get the audio on the XP with the video.
Off to find the codec for the mac...I found a file, i forget where i got it, placed it in the /libary/qucktime. and none of my .avi files will play any more, just a white screen. my .mov files seem to work fine. I remove the codec, and QT is still busted.
In reading the fourms here, it seems Quicktime is part of OSX, so there is no real, uninstall...reinstall thing, is that correct? Unless there is another suggestion, I plan on reinstalling OSX tonight. This should restore QT.
Also, is there a ac3codec type thing for the mac?

Ok, i'm getting really bent. I don't get how these played before and now they don't. I'm still not getting it to work.
Here is the movie format: XVID, 608 x 272, Unknown
I went here to get a codec: http://www.xvidmovies.com/mac/
i down loaded the codec for OSX
I end up with a file called: XVIDDelegate and i put in in the root of the HD\Libary\QuickTime.
Still does not play.
there is an instruction file.
"First you need DivX 5 (http://www.divx.com/divx/mac/). Then, if you are
on MacOS X, drop "XVIDDelegate.component" into /Library/QuickTime, or if
you are on MacOS 9, drop "XVIDDelegatePPC" into your Extensions folder
and restart."
So i go to dvix.com, and it seems i have to pay $20. I'm really confused, maybe its just frustration blinding me. Most of my avi files played, now they don't.
Thoughts?

Need IDE for Mac OS Jaguar

Similar Messages

Maybe you are looking for