NEED IDES DVD's

Hello All
I want to install SAP IDES at home, Is it possible? If yes please tell me where can i buy those dvd's?
Regards
Rizwan

Hi ,
If you r working where SAP is being used....u can request for SAP ID....
There is no option for rental kind of thing.....
By the way in certification they don't ask configuration questions and in fact when I took this exam...there was none being asked to any one....
So you can be sure for that.....
Thanks
Dipak

Similar Messages

SAP R/3 4.7 IDES DVD

Hi,
I recently got certification in ABAP and looking for IDES DVD to learn IDOC & LSMW. I already have miniSAP but it not good for IDOC etc. I will appreciate if somebody tell me how I can get the DVDs. Currently I am not working in SAP so cannot ask the company to order it.
I am looking for job in ABAP but now a days everybody needs IDOC, Interface and data migration experience, so want to learn these on IDES.
Thanks,
Manoj Goyal
[email protected]

Hi Manoj Goyal,
Try these links...
1. List of DVD's on Sap R/3
http://computers.search.ebay.ie/sap_Software_W0QQbsZSearchQQcatrefZC6QQcoactionZcompareQQcoentrypageZsearchQQcopagenumZ1QQfgtpZQQfposZPostcodeQQfromZR2QQfsooZ2QQfsopZ3QQftrtZ1QQftrvZ1QQga10244Z10425QQlopgZQQsacatZ18793QQsadisZ200QQsaprchiZQQsaprcloZQQsaslcZ3QQsbrftogZ1QQsofocusZbs
2. Price of Sap R/3
http://basisconsultant.com/modules.php?name=Forums&file=viewtopic&t=847
3. About SAP R/3 IDES DVD( I translated the page :-D )
http://translate.google.com/translate?hl=en&sl=de&u=http://www.wer-weiss-was.de/theme-i129-p3.html&prev=/search%3Fq%3DSAP%2BR/3%2B4.7%2BIDES%2BDVD%26num%3D25%26hl%3Den%26lr%3D%26client%3Dopera%26rls%3Den%26sa%3DG
Hope it helps.
Regards,
Maheswaran.B

DKA790GX Plat with SATA + IDE DVD drives

I have been running my mb with 2 x SATA HDs and 2 x IDE DVD. No problem.
In (re)building on older computer I had the need for an IDE DVD drive as the SATA was too new so I swapped out one of the IDE from my DKA790GX.
Now I can get the SATA DVD to work fine on the DKA790GX but NOT the IDE. It seems to be working OK as it makes all the same noises as the SATA when I put in a disk. I have tried moving Jumpers and different IDE cable but can not get it to work.
In itself it is no big deal but I kinda like having an IDE around as it has got me out of scrapes a couple of times.
Any ideas?
Thanks
Alan

Quote from: Fredrik on 20-December-09, 09:15:08
Perhaps it got damaged during the move. Have you tested it in your other system lately?
Thank you for the polite and quick answering! We would however like some more info. about the system you are talking about. PSU, processor, memory, graphics card.
Thanks Fredrik always a possibility its damaged will try it later in the original PC it came from.
Here is the set up that does not work with PATA-IDE DVD drive:
OCZ 4GB PC2-8500 Platinum (2x2GB) - Part: OCZ2P10664GK, 1066MHz, CL 5-5-5-18, Lifetime Warranty
AMD Phenom Quad 9950 2.6GHz (Retail AM2+) - HD995ZXAGHBOX, 125W
MSI DKA790GX PLATINUM AMD® 790GX Socket AM2+ Motherboard
Club 3D ATI Radeon HD 3450 Passive Dual Heatpipe 512MB PCI-E2.0 - Part: CGAX-3452, 600Mhz Core, 800Mhz DDR2 Memory, 64-Bit Memory Interface
Thanks Alan

SAP IDES DVD

Where can I get SAP 4.7 IDES DVD ?
I would like to have one for training purpose.
Thanks for help!

> Where can I get SAP 4.7 IDES DVD ?
>
> I would like to have one for training purpose.
>
> Thanks for help!
-> http://service.sap.com/swcat -> SAP IDES -> SAP R/3-R/3 ENTERPRISE-ERP -> SAP R/3 ENTERPRISE IDES -> 4.7x2.00 SR1
and...
<i>Order authority for Software Catalog per S-User and Customer or for your customer number only the electronical software shipment (download = service.sap.com/swdc) is allowed. If you need also the physical shipment (for CD/DVD) please contact the SAP contract department or create customer message on component XX-SER-GEN-CONTR.</i>
GreetZ, AH

Need ideas and stuff for a new laptop or netbook.

Need ideas. I'm lookin to buy a new laptop soon. Next couple months. I want something that runs good, runs fast, doesn't have a lot of junk installed on it and something below $700 dollars (may pay more...just depends). Any brands that are good? I thought maybe getting a netbook because I really just need some small storage and an awesome internet. Would a netbook be good for that? I use verizon wireless on my laptop right now but I'm going to switch to AT&T soon.

In todays world of Net Books, 250 GB and 2 gb configurations are becoming standard. However, a majority of the Net Books out there still have the standard 1gb and 160gb hard drive configurations. You can upgrade the hard drives and memory in the newer Acer Netbooks now because of the redesign the did to the casing. The 8.9 inch net books Acer came out with could not allow the hardware upgrades because of their initial proprietary casing design. But with hacking and warranty voiding someone did it.
The bare minimum price you can expect to pay for a Net Book is $299 on average for the majority specs I posted. For better specs you will pay more for them.
Please always buy an optical drive with a Netbook or purchase a $399 laptop in the end for better flexibility.
*******DISCLAIMER********
I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums.

Why do we need IDE or tools for java card programming?

Hi,
I am a newbie to java card, using java card kit tools themself, we can test and burn the code into card right?
then why do we need IDE for java card, please correct me , if i am wrong,
Thanks in advance,
Sri.

Dear Sri,
We have compiler, linker etc for every language starting of from C or C++ or Java. JDK has all the tools necessary to develop and run a Java program. Similarly Java Card Development Kit has all the tools for developing and deploying a Java Card applet. But what an IDE does is too integrate all these tools and make it easier for the JavaCard programmer to develop his applets. Just like Eclipse is used for Java applet development.And not everytime the code is burned to the card. Its only during masking code is burned to the card, i.e if u can call it burning. Masking makes an applet permanent on the card.

P35 Neo2-fr cannot unable to show IDE Dvd-rw in XP

Hi guys, i have 2 SATA hdd, 1 Sata DVD-rw and 1 IDE dvd-rw drives.
With P35 NEo2-fr, everything is detected except the IDE dvd-rw drive. Both Master and Slave mode are tried, still it was of no use.
Help , thanks.

Jumper it as cable select.
Also ensure data{in properly direction} and power cable are connected.

In anticipating upgrading to Premiere Elements 13, I need to know what "gotchas" there might be in loading project files from version 10 (in case someone needs another DVD/Blu-Ray)

Particularly, can I load project files from version 10 (in case someone needs another DVD/Blu-Ray)

cbjameson
What computer operating system is involved?
There is no guarantee that a project created in an earlier version can be opened in a later one. Many times it can, but...
If you do try this, then please consider working from a copy of the project 10 project file and then trying to open that in 13/13.1.
Reason: projects created in an earlier version and then opened and edited in a later version cannot be opened again in the
earlier version.
And, there is always the issue of maintaining the connect of the source media with the project file. Is this move from 10 to 13/13.1
happening on the same computer and are the source media in the same place where they were when they were first imported
into the 10 project. Disc menus consideration may enter into this depending on your details.
ATR

I need import dvd content to compressor or FCP to re encode for web

I need import dvd content to compressor or FCP to re encode for web
Is there a short cut?
When I tried, only the video went as the audio seems to be embedded. How can I encode a DVD to and Mpeg4 file with the audio?
Thank you all in advance.

Google MPEG Streamclip. It's free and works! This questions gets asked a lot. Take advantage of search when you can.

IDE dvd/cd drive replacement

can I replace my IDE dvd/cd rw drive with a SATA drive?
Solved!
Go to Solution.

Only if your motherboard has SATA....
If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

Annoying IDE DVD Drive problem...

Hi
I just put together a new gaming system yesterday. However I've been having an annoying problem so far with my IDE LG DVD writer not being able to read CDs/DVDs properly.
I try to install different games/programs and after a lil while I'll get an error saying"FileError: retry?" I have tried using the setup files with autorun disabled.
My specs are-
MSI K8n NEO4 Mobo
1 Gig Corsair Ram
300 Gig SATA MAxtor HD
256mb XFX GF 7800GT
A64 3500+
So here is what I've tried so far.
Opened up the case drive set to master, plugged into master IDE cable, verified this in the BIOS.
Windows installed fine on the same dvd writer drive with no errors at all. It seems only after installing the Nforce IDE drivers that this occurred. I tried removing just the Nforce IDE drivers using add/remove programs but the problem still persists. I am sure this dvd writer works as it works in other computers and successfully installed windows onto the machine, I then tried reinstalling windows a second time just to make sure...same problem. When the Nforce driver was installed I checked and it said ultradma 33. I put it in PIO and the same problem continued.
I know for a fact my cds are good as they are all originals and work in other machines with no scratches.
After removing the Nforce IDE drivers the Windows IDE drivers installed and I rebooted, same problem.
I am really stumped here all I have in the PC are 1 SATA Hard Drive and 1 IDE DVD writer connected to their respective master cables and proper jumper settings...everything looks good in the BIOS.
One other thing I also have an external USB 2.0 Dvd Writer, I use this on another machine. I tried it as well in the machine and I get the same problem. I know it isn't the USB connection since I have other devices on the USB that work fine.
Any ideas? :S

Quote
It seems only after installing the Nforce IDE drivers that this occurred. I tried removing just the Nforce IDE drivers using add/remove programs but the problem still persists. I am sure this dvd writer works as it works in other computers and successfully installed windows onto the machine, I then tried reinstalling windows a second time just to make sure...same problem. When the Nforce driver was installed I checked and it said ultradma 33. I put it in PIO and the same problem continued.
Your problem is in the nvidia drivers ... you should not uninstall the drivers via add/remove programs but instead go to system >> hardware >> IDE >> properties >> update driver >> choose a driver >> ms or "native", then reboot (in English slightly other wordings might be used).
Regards,
Hans

How can I downgrade to Snowleopard? I need a DVD.

Today I bought a Mac mini with Lion. How can I downgrade to Snowleopard? I need a DVD. Where can I get them?

There is a large thread concerning this, just look for it. The final answer is as college-kid491 said, SL does not have the drivers to suppport the 2011 Mac Mini's. People who have done this have gotten very poor performance and many things not working correctly, and have had to re-install Lion.

785GTM-E45 SATA (AHCI) HDD and IDE DVD drive cannot be used together

I have bought 785GTM-E45, and installed a sata hdd and a IDE dvd drive on it. the sata is set to ahci mode. After install xp using f6 method and install all the drivers, I cannot find the dvd drive at all in windows. I have to go into bios to set the sata ports back to IDE model to make the dvd appear again.
Anyone knows the reason? It looks like a bios bug. I am using the new v8 bios.

Quote from: vm1 on 06-October-09, 00:12:31
It is just annoying that this board has so many issues. No vcore change, no gpu voltage change, v8 bios will freeze if entering processor details, and the issue in this current topic. I have used at least three other brands' boards and never had any issue before. Oh my, MSI...
MSI bashing is NOT allowed
>>Please read and comply with the Forum Rules.<<
You could have read the manual before buying, then you would have known it's a cheap office board.

Problem with IDE DVD drive

Hey guys. I just built a desktop and I've been having some problems recognizing my hardware. I've got a SATA hard drive and it works fine, but my IDE dvd burner isn't recognized. It doesn't show up under /dev/ and lspci -v returns
03:00.0 IDE interface: Marvell Technology Group Ltd. Unknown device 6121 (rev b1) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Marvell Technology Group Ltd. Unknown device 6121
Flags: bus master, fast devsel, latency 0, IRQ 10
I/O ports at cc00 [size=8]
I/O ports at c880 [size=4]
I/O ports at c800 [size=8]
I/O ports at c480 [size=4]
I/O ports at c400 [size=16]
Memory at fe9ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Capabilities: [e0] Express Legacy Endpoint IRQ 0
I'm running an Intel Core 2 Duo e6850 on an MSI p35 platinum motherboard with 64 bit Arch installed. The drive gave me some problems when I installed arch; I could boot the CD, but once I tried to install any packages it told me that no CD drive was found, so I had to install from FTP. I'd really like to have 64bit Arch on this computer, so I'd really appreciate any help. Thanks.
-Kenny

I have the LiteOn DVD burner, and encounter the same problem as you. Tried everything suggested by others, nothing worked. Finally got it to install when I changed the memory settings from 667 to 400.

Need ideas for plug-in re-design

My DAQ app uses "Plugins". A Plugin is a VI which conforms to a particular terminal configuration.
Here is the complete diagram of a simple one:
The idea is that a plugin is another channel: This one takes the value of TORQUE (in N-m) and the value of SPEED (in RPM), performs some computation, and produces a result POWER (in kW).
The user can then think of this as just another channel - it shows up in the datastream and the user can plot it, record it, set alarms on it, convert it to an output and send it out the CAN bus, anything he can do with a real channel, he can do with this plugin channel.
So the above is exactly equivalent to having a POWER transducer.
They can get much more complex than this.
My code organizes these so that the prerequisite channels are run first, and then the dependent ones. (a prerequisite channel could also be a plug-in).
If plugin B depends on plugin A as a prerequisite, I make sure that A runs first, regardless of which comes first in the CONFIG file.
So the actual DAQ code samples the hardware channels, and then the plugins in a particular order.
The DAQ is sampling at 10 Hz, and so these plugins run at that rate too. There may be 100 different plugins, maybe 50 at a time in one test.
The DAQ runs on a PXI box, running RTOS. The host is an ordinary PC, running Windows.
Even though the PXI is running a compiled RTEXE, it still loads the source-code VIs and runs them.
My data file includes all the recorded data, all the config stuff used to set that up, AND THE PLUGIN VIs THEMSELVES.
The plugin VI files are read as strings and stored in the datafile as strings, along with their names.
When reading a data file, I read this string, and store it in a "sandbox" folder with a .VI extension.
This guarantees that the version I have is the version the data was originally recorded with.
The user can EDIT the data files, for example changing the scale factor on the SPEED channel from 307.3 RPM/V to 308.5 RPM/V.
That causes a re-calculation of the SPEED channel.
It ALSO causes a re-calculation of the POWER channel: My code detects that POWER depends on SPEED and since SPEED changed, I have to run every sample back through the POWER VI to get a new value. (Remember they're not all as simple as this example).
THAT is why the VIs are stored in the data file.
ALL OF THAT WORKS.
100%
Like a dream.
For 8-9 years now.
EXCEPT...
When it comes time to change LABVIEW versions.
MY client has 10,000+ data files, each with 5-50 VIs embedded. Files are spread among 30+ machines, with a central server backup.
We need to hang on to this data.
I have a File Updater, which will take datafiles and update them (they are a DataLog file).
THE TROUBLE IS:
If I take a recent datafile, recorded with LV2010 (where we've been for 3+ years) and open it with the EXE built with LV2013, there's a problem if it tries to reprocess it. The error comes out as
Error Code 1126 occurred at Open VI Reference in HDT Open PlugIn.vi->HDT Find Calc Prerequisites.vi->HDT DataFile Prerequisite Manager.vi->HDT DataFile Viewer.vi->HDT.vi<APPEND>
An error occurred loading VI 'BSFC.vi'.
LabVIEW load error code 10: VI version (10.0) is too old to convert to the current LabVIEW version (13.0).
The EXE code, having no COMPILER handy, cannot use the old VI.
My FILE UPDATER, has a recompiler built into it (it reads the VI string, saves it as a VI file, opens it as a VI, saves it as a VI, then reads it as a string and puts it back where it belongs.
But if THAT is built into an EXE, it doesn't work either. Same problem, same error.
If I run the FILE UPDATER from the LV2013 DevSys, then it's OK. The re-compile process works fine, and then the EXE can read it and use the VI.
BUT:
1... That's painfully slow. I have a cache handler where I recompile each VI only once and recognize it if I see it again, but still it's a long process.
2... That doesn't work from an EXE. My client has 2-3 DevSystems and 30+ computers with just the EXE. But that's where the data files are.
3... Backup up Data Files on CD or DVD doesn't work.
SO............ TO make a long story even longer.......
I'm looking for an alternative.
REQUIREMENTS:
1... String-based, I suppose. I want to type in "Power = Torque * Speed / 9545" and have the code know to fetch the value of "Power", the value of "Torque", do the math, and produce the result.
2... Has to execute quickly. I have a zillion things to do at 10 Hz.
3... Has to be able to re-order itself. If I have ANOTHER plug-in channel called Fuel per Watt, and it calculates "FuelPerWatt = FuelFlow / Power * 10.34", then it has to know to execute POWER before it executes FUELPERWATT.
4... Musr work from an EXE and an RTEXE.
I've looked at a thing called MathToG, and it works OK for creating a VI from an equation, but it needs VI scripting, and therefore won't work from an EXE
Any ideas?
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks

Starting at the top, create a class which has no data and two methods - GetPrerequisites and Execute. Both are dynamic dispatch (use the right-click option in the New menu in the project to create them).
GetPrerequisites - has the input and output of the parent class so it is dynamic dispatch, and has a single output which is an array of the same class. You may want error I/O as well.
Execute - has the input and output of the parent class so it is dynamic dispatch, and has Result and Units outputs. The prerequisites output is redundant with the previous function, but can be added. Again, you may want error I/O.
In the parent class, both of these functions are essentially empty and return default data. The parent class is used for a template and to provide a parent for the function classes. As such, set the properties for each of the methods so that children must override them (do this in the class properties dialog box). Set these up the way you want them up front, since the children must use the exact same connector pane.
The functions themselves are all created as follows:
Create a class
Change its inheritance so it inherits from the parent class - it is now a child
Use the new menu on the child class to create functions to override the originals
Delete all code but the terminals in the child functions
Change the GetPrerequisites code so it returns a constant array of the prerequisite objects. These will be parallel children of the original parent class. For your power class, this would be an array containing the torque and speed classes. The easiest way to create this array is to drag a copy of the torque and speed classes onto the block diagram and use build array. They will be "coerced" to the parent class, but LabVIEW still knows what they are.
Change the Execute code so that it does whatever it needs to do. In general, use the GetPrerequisites function to fetch the prerequisites. Use a FOR loop to run the parent Execute function on each of these prerequisites. Dynamic dispatching will execute the correct code. You now have an array of the results. Use this, with whatever other functionality you need, to calculate your final values.
The prerequisites can be dynamically loaded so you do not have a static link to the prerequisite classes. If you would like to have a text interface, you can dynamically load the individual functions, then use their values in a LabVIEW formula VI for the final calculation.
If this is still Greek, you may want to walk through the examples of LabVIEW classes and dynamic dispatch to get more background on how to use classes.
If you would prefer a text string for your units so that you have more flexibility, let me know. I have an SI unit string validation VI that may be of use. It works for most unit combinations, provided they are not nested too deep.
This account is no longer active. Contact ShadesOfGray for current posts and information.

NEED IDES DVD's

Similar Messages

Maybe you are looking for