Need .idml converted to an .inx file in CS4 InDesign

I'm trying to backsave a file from CS5 to CS3 for a client and apparently there's not a way without CS4.
Does anybody know of a way? I haven't been able to find anything yet.
Or is there somebody willing to backsave the file for me? Thanks a lot.

Grr. (Is there a way to set Thunderbird to always send plain-text-only
messages to the Adobe Forums domain?)
What I said to the OP is:
You can send it to me: admin (at) id-extras.com

Similar Messages

What software do i need to convert AVCHD mts/mts2 files to import to iMovie

What software do i need to convert AVCHD mts/mts2 files to import to iMovie

As Kirk says, if you have your camera, you can attach it directly.
Further, if you preserved the entire file structure of your camera (not just the .mts files, but also the folders on the camera), then you can import from that via FILE/IMPORT FROM CAMERA ARCHIVE.
When you import from a camera, it is recommended that you keep a camera archive so you always have the originals available.
If you have the .mts files out of context, you will need a third party app to convert. Two that I know of are ClipWrap and Voltaic HD. You should convert the files to Apple Intermediate Codec. And then use FILE/IMPORT/MOVIE.

Hello. I am trying to transfer MP3 format sound files (currently saved to my Dell PC) to itunes. These files are audio books. Do I need to convert them to different files first? Thank you.

Hello. I am trying to transfer MP3 format sound files (currently saved to my Dell PC) to itunes. These files are audio books. Do I need to convert them to different files first? Thank you.

File > Add File/Folder to iTunes

Need to convert over video 100 files to iPod quality files

i have over 100 .mov files that i need to convert to mp4 in order to play on my Palm Treo 700p...
each original file is approx 78 to 81 megs... about 39 to 40 minutes of video. i am converting ONE file now and it told me it would take about 1 hour 55 minutes to convert it to the "convert to iPod" preset
at that rate, it will take forever to convert all these files... is there a faster way? or better settings to use in quicktime?
they don't have to be extremely high quality, they are lessons for bible classes i am taking, but i'd like the audio to be decent and for the video to be clear and not fuzzy...
thanks for any help you can provide.

I have both VisualHub and MPEG Streamclip.
At the moment, I only use VisualHub to handle a few quirky .mpg files which MPEG Streamclip had problems with (data breaks that aren't fixed) and FLV file conversion (because I don't have the new beta version of S'clip, which supports FLV).
But as Rick said, MPEG Streamclip works wonders for pretty much everything else. I still would recommend that first before VisualHub.
Steve

Need to convert video and audio files in high quality

Hi to all, i need to convert file types such as .AVI, .WMV and .MOV and keep the high quality, but i dont have or know any software to do this, are there any good options out there?
I don't really want to use a trial version, thanks.

I've used FFMpegX for my conversions. I've never looked at them on a large screen to see how well the video quality held on, but they look fine on my MacBook.
http://www.ffmpegx.com/
~Lyssa

I only need to convert more than 1 file into pdf....

I only need to convert files very rarely, is there a price for pdf conversions individualy, I do not need for a year at 7.99 a month. Is this available? Thank you....Janette

This forum is for Adobe Reader on Android. You can find the Lightroom forum here: Photoshop Lightroom

Help needed in converting Excel from XML file

Hi Can anyone help me in converting XML in to Excel.
Thanx,
Ananth.

well, that still isn't much to go off of. I give it a try though.
I guess you want to parse out the relevent data out of the xml file and then decide on your favorite delimated file format for Excel. Two popular formats are comma delimated:
"info1","info2","info3","info4"
and tab delimeted:
info <tab> info2 <tab> info3 <tab> info4
Excel should be able to unsestand either of these formats.

What do I need to convert a Microsoft Publisher file to PDF?

I have Microsoft XL Professional and I am doing newsletters for an organization I belong to. I am doing them in Microsoft Publisher, but want to email them to the members using PDF. What Arcrobat product do I need and how do I do it?

Hi Barb,
Acrobat.com, a free online collection of services, does not support the conversion of Microsoft Publisher files to PDF. Here is the list of supported file types:
text (TXT, PS, RTF), Microsoft Office (DOC, XLS, PPT, PRJ), Open Office (ODT, ODP, ODS, ODG, ODF), Star Office (SWX, SXI, SXC, SXD, STW), Word Perfect (WPD), and image files (BMP, GIF, JPEG, TIFF, PNG)
The full version of Adobe Acrobat, the most current being Acrobat 9, supports a much longer list of file types. For more information, see: http://www.adobe.com/products/acrobat/
I'm guessing that you're using some version of the desktop product at Church?
Best,
Michelle

Script to convert metadata to xml file - Bridge CS6/InDesign CS6

I need a script that will convert metadata in Bridge to an xml file I can import into InDesign so that when I export long documents the alt text for photos is already included with the images.
Two problems -
1) I need the scripting for dummies version - from step 1 to end. I have zero experience with using scripts, as in - did not know they existed until a few days ago.
2) If the script needs adapted - see #1; there is very little hope that I will have any idea of how to do that without assistance.
I will be grateful for any assistance!! I do want to learn how to do this, if I can.

I need a script that will convert metadata in Bridge to an xml file I can import into InDesign so that when I export long documents the alt text for photos is already included with the images.
Two problems -
1) I need the scripting for dummies version - from step 1 to end. I have zero experience with using scripts, as in - did not know they existed until a few days ago.
2) If the script needs adapted - see #1; there is very little hope that I will have any idea of how to do that without assistance.
I will be grateful for any assistance!! I do want to learn how to do this, if I can.

Links lost when exporting to INX file in CS4 for Mac.

I am working with a remote designer who is still in InDesign CS3, but I have CS4. We are both using Macintosh computers. When he emails me a CS3 file, I open it and it converts to CS4, and the links all seem to be just fine: They're missing, because he hasn't sent me the linked files, but the previews and the names of the links are all fine. But when I export the file as Indesign Interchange - INX - format and email it back to him, he opens it and all the links are gone -- they are replaced withe gibberish, and the only way to get the file back is to remember where the links were and manually re-link everything. This is a known bug, and I understand it was fixed in the Windows version of CS4 with an update. Does anyone know when it will be fixed in the Mac version? We are about to have to revert to QuarkXpress, because this is an untenable way to work.
Thank you.

The release notes for the updates indicate that the problem was fixed. If you've applied the update, you might re-check your version number and make sure that it "took".

I need to automate my bridge photo files through CS4 keeping Adobe RGB

Not sure what I am doing wrong. The files from camera are Adobe RGB and the camera raw files are marked to be Adobe RGB but when I
process them through CS4 automate> run batch they are all converted to SRGB jpgs. I want RGB.

Jayne, I tried myself (normally use my own PS created batches for this in
the action panel) but do not experience strange behavior.
Could you confirm some settings for me?
When having selected files in Bridge and use tools/PS/Image processor my
window is set for
1 - open first image to apply settings
2 - save in same location
3 - save as jpeg
4 - include ICC Profile
All other settings are unchecked.
I tried also with settings to convert to sRGB and with and without ICC
profile, all resulted in the expected way with correct or untagged (no ICC
profile) color space.
Some other things to check:
Be sure not to have included to run an action (under chapter 4 in Image
Porcessor) if so, check if this batch has no command to convert the color
profile)
And second try to use the same Image Processor settings from PS itself
(File/Scripts/Image processor)
If it works from PS you also can try to reset the preferences for Bridge
with restarting Bridge holding down option key and choose reset preferences.
Hi Omke,
No I have not got the box ticketed for sRGB in Image Processor.

Need help exporting multiple individual PDF files out of Indesign CC

I work for a monthly publication and we send our files to the press at the end of the month. There are around 190+ pages that need to be exported as individual PDF's and each PDF needs to be labled as their correct page number. Since we often are backed up against the wall at our deadline, we really need a way to export all these files at one time. Is there a way to export multiple PDF files at one time in Indesign CC?

You could script InDesign to export each page as individual PDF with specific export presets and labeled with correct page number.
But you could also use Acrobat Pro for this task (sorry for the certainly wrong translation of the Acrobat UI – I use a german version ...):
Export the whole publication as 1 PDF file (pp. 1-190).
Open it in Acrobat Pro and choose »Tools › Extract Pages«.
Type 1 to 190 and check the box »extract pages as single pages«, choose the location where to extract to and acrobat automatically numbers your new PDFs sequentially from 1 to x. (Caution: it doesn’t take the correct page number, but numbers sequentially, so it is important to have a PDF from pp. 1-190 in the correct order.)
So with this (as mentioned – sorry for German ):
You’ll get this:
Tobias

Need help importing corel draw 10 files into adobe indesign with editing ability.

I would like to know if anyone knows of a way to import corel draw 10 files into adobe indesign

Can't edit.
Best bet..and still a longshot depending on the layout, is to open in
Illustrator and do the editing there.
Bob

Need someone to convert CS3 .inx file to CS-compatible

Good afternoon,
Step 1: get someone to convert a CS3 .inx file to one that works in CS2.
Step 2: get someone else to convert that CS2 .inx file to one that can be opened in CS.
Any takers? Say yes and I'll send the file to you via email (since the file attachment feature of this site is currently unavailable).
Thanks so much.
malboniz in Seattle

Peter,
I originally thought that I come to a dead end when I couldn't open up anything on my own laptop. I am determined so I asked around the office an found someone that has InDesign CS2! With that computer I have had success. Now I see that the image files are not linked so I've asked the designed for the .jpg files. Once I get those, I can put them in the design and move forward.
Thank you so much for your offer to convert the file. I couldn't have done it without you.
Mark

I need to convert Nikon D7000 Camera NEF files. I have a Mac )SX 10.6.8 & Adobe CS4.

I just bought a Nikon D7000 camera & need to convert Nikon RAWS (NEF) files & they are not recognized by my Adobe CS4 on my Mac 0sX 10.6.8
Do I need to update to CS5 or CS6. Also, would like the new software to allow me to still convert older pre-existing RAWS that are in my photo archives.
sher

Easiest one first:
oharaphoto wrote:
....would like the new software to allow me to still convert older pre-existing RAWS that are in my photo archives...
Don't worry. Every newly supported camera model in any given version of Adobe Camera Raw will be supported in ALL subsequent versions of ACR.
The very last version of ACR that will work with CS4 is 5.7.
If your camera in not supported by ACR 5.7, you need to upgrade your version of Photoshop, or download and use the free stand-alone Adobe DNG Converter to convert your raw files to raw DNGs first. Always download the latest versions of said free stand-alone Adobe DNG Converter (3 or 4 per year), currently DNG Converter 7.1. DNGs can be processed with any version of ACR starting with version 2.4.
To see what was the first version of ACR to support your camera model was see:
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

Need .idml converted to an .inx file in CS4 InDesign

Similar Messages

Maybe you are looking for