Need info about HDD adaptor and Vista utilities installation on Equium A110

I own an Equium A110-233 (PSAB2E), and I recently upgraded to Vista after installing 2GB of RAM. However, I found myself a little short of hard drive space and treated myself to a new 120GB HDD. However, it seems that the computer has an edge connector interface, as does the existing Hitachi TravelStar HDD - it doesn't look like there's an adaptor plug on the drive. Does anyone know where I can get an adaptor for my "traditional" 40-pin hard drive?
After installing Vista and reflashing my BIOS, I reiinstalled ConfigFree and the Value Added Package (amongst other drivers). However, running ConfigFree always leads to a crash with the BSOD ID "NO_MORE_IRC_STACK_LOCATIONS".
As for the VAP, I wanted it mainly for Power Saver. However, searching for it gives only "Power Saver Help".
Can anyone give me any pointers here? Thanks.

Hi,
did you know that you have a serial-ata drive in your machine which is not compatible to the IDE standard (40 pin)? You wont get an adaptor from 40 pin to serial ATA, because SATA is a completely different technology to IDE.
You will have to return the harddrive you purchased and buy a serial-ata drive, which will fit in your machine.
A little idea from my side regarding your BSOD:
Download the powersaver and the configfree for vista from the internet (this is a good address: http://209.167.114.38/support/Download/ln_byModel.asp) and reistall that stuff, maybe it helps.
Greets

Similar Messages

Needed info about io devices and cpu without using prtdiag

Hi
I need to collect info about io devices and cpu. but i cannot use prtdiag.
is there any way to collect this information on solaris machine....
may any available c APIs
Thanks in advance.
Nagesh

yep.... prtconf -vp | grep <wot u r looking 4>

Need info about HDD support for Satellite 2800

Hi!
What max HDD can I use in Satellite 2800-200
Thanks .

Hi there,
the biggest model of the 2800 series was delivered with a 30GB HDD. But I think maybe you can try a 40 or 60GB HDD.
The bad thing is that I cannot promise you, since the machine is a pentium 3 platform and I don´t really know how big they drives can be..
The most secure way is to buy a external USB-HDD and just put the data on it, but thats just my opinion.. ;)
Greets

Need info about Serena Collage and Netweaver 04 WEBAS

Is anyone using SERENA Collage with Netweaver Web Application server? I have some deployment questions. Any assistance is appreciated.

Hi Ravikumar
you can check the following whitepaper
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/eac9cf35-0801-0010-918b-ab231eba0bd0
and the verify the following
http://help.sap.com/saphelp_nwce10/helpdata/en/45/51b5d88a853bdce10000000a1553f7/content.htm
if it helpful reward points are appreciated

Need Info about BW CRM Analytics

Hi all,
Guys,
Please help me out...
I need Info about BW with CRM Analytics
What are the core areas where data's are extracted for CRM to BW
What will be the Interview question related to BW CRM Analytics
If possible if u have any docs kindly email me at [email protected]
Thanks in Advance.
Jaffer Ali.S

Dear Jaffer Ali S.,
The following types of analyses can be carried out:
CRM Lead Analysis
Use the InfoCube CRM Lead Management (Technical Name: 0MKTG_C01) for reporting.
The Lead Management InfoCube contains all the characteristics and data used for the administration of leads. This InfoCube enables you to execute the following standard queries available in SAP BW:
Channel Analysis
Efficiency Reporting
Historical Evaluation
Lost Leads
Channel Management: Top-n Lost Leads (Current Year)
CRM Activities Analysis
Use the InfoCube CRM Activities (Technical Name 0CSAL_C01) for reporting.
The InfoCube for activities in CRM provides the data basis for evaluating business activities undertaken by your employees. It provides you with information about how much time is being spent on contacting the customer, whether customers actively seek out contact with your company and how intensively your employees look after your customers. It delivers data for queries such as:
Intensity of customer care
Activity History
Success/failure analysis
Customer Interaction Center (CIC)
Activate the InfoCube Interactive Scripting Evaluation (IC WinClient) 0CRM_CIC1.
Interactive Scripting Evaluation (IC WinClient)
This InfoCube provides the data base for the interactive scripting evaluation. It supplies the data to the Interaction Center (IC): Interactive Scripting Evaluation query.
Opportunities Analysis
Activate InfoCube 0CRM_C04 - Opportunities.
The CRM Opportunities InfoCube contains all the characteristics and data used for the opportunities analyses.
Sales Order Complaints Analysis
Activate InfoCube Complaints (Technical name: 0CSAL_C09).
You can carry out the complaint analysis on a daily, monthly, weekly or a quarterly basis. The analysis can be done in relation to CRM Service Organization, CRM Sales Organization, CRM Product, and Sold-To Party.
Service Qualtiy Analysis
Activate the MultiProvider 0CSRVMC04 - CRM Service - Orders and Confirmations with Complaints.
The MultiProvider 0CSRVMC04 - CRM Service - Orders and Confirmations with Complaints gets the data from the following ODS objects for analyses in various queries:
0CRM_PROI - Orders: Item Data
0CRM_COI - Controlling (Item Data)
0CRM_CNFI - Confirmations (Item Data)
0CRM_COMP - CRM Complaints (Items)
Let me know if you need further help.
Reward points if it helps.
Regards,
Naveen.

I need info about CL_XML_DOCUMENT

Hi to all,
I need info about the class CL_XML_DOCUMENT and his methods.
I only have seen information of a few methods.
Where can I find more information and examples of use about this class?

Hi,
This question is already answered before in this forum, check out the below link -
Information about CL_XML_DOCUMENT
Hope this helps.

HT4623 I cannot install my ipod to my computer. Says something about the device driver. I did not get it new either and so have no info about it. And I have never used one before and have no friends who have either. Can someone help me?

I cannot install my ipod to my computer. Says something about the device driver. I did not get it new either and so have no info about it. And I have never used one before and have no friends who have either. Can someone help me?

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

HT6114 hello .. i am using mavericks OS and it is showing it needs updates about 800 meg. and every time i download that it dosent do anything and again it is beginig to download again and again that.. please help me. the update is 10.9.2

hello .. i am using mavericks OS and it is showing it needs updates about 800 meg. and every time i download that it dosent do anything and again it is beginig to download again and again that.. please help me. the update is 10.9.2

To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step.

Need info about RH Server 6 and reports

I'm interisted in RH Server 6 but I'm unable to locate much
practical info about it on the Web site, and a call to sales didn't
help. I need to know what I'm getting us into before I contribute
our $2,000. Can anyone provide this information or point me to its
location on the site:
--I have system requirements from the Adobe site, but what is
the "server" and what does installation and setup entail? About how
how long does it take, or how difficult, to achieve operability?
--According to a piece by John Daigle, the server component
should be installed on a Windows server running IIS 5+. Is IIS a
separate software or standart part of Windows server? If separate,
what preparation should that server have before the installation in
addition to installation of IIS?
--I know nothing about security/firewall protocols. We will
have our own and our customer firewalls to navigate. Are the server
setup instructions adequate for setting all that up? Or are
purchasers expected to have sys admins knowledgeable to set that
up? Is that applied to the RH server or the Windows server? if RH
server, how can I get a copy of instructions for my system people
to review?
--Have users found the RH server/RoboEngine reliable, once
it's operable?
--Is it true that the usage reports aren't customizable? Can
additional usage data be specified in the RH server?
--These report summaries are vague--Areas Requiing Help,
Frequently Viewed Content--stating only that repoorts show the
suchandsuch done "most frequently" or "most often." Does that mean
the top 3, 5, 10 or what? Is there a way to track all of that
activity from most to least?
--The summaries of the reports Unanswered Questions and
Frequently Asked Questions say that terms entered in the Search
field are identified. Questions and terms aren't the same in my
book--am I right that it captures anything entered? Can it do the
same for the Index field?
--I saw no RH server under downloads, or maybe missed it.
Correct in guessing that a demo version is not available?
--Is RH server user doc available on the web site? I found
the Getting Started gude, which isn't much use in evaluating the
product.
I have additional questions, but if you can answer these
questions or direct me to answers some of those may be covered.
Thanks,
Mike
Access database.

Hey, Mike!
I found a few things for you. I'm in a hurry, so I'll list
them quickly.
For the Trial, go to the Adobe downloads page
http://www.adobe.com/downloads/
Then select RoboHelp Server 6 from the dropdown list. You
will be asked to register (free) if you haven't already. When you
arrive at the download page make sure you note the Trial Serial #
To make it easier for you, its:
1336-1033-2628-5062-0993-4570
You can also find a RoboHelp Server 6 Getting Started Guide
here
http://www.adobe.com/support/robohelp/downloads/getting_started_rh6_server.pdf
You were asking about IIS. Yes. As Colum says, this comes
with virtually any version of Windows Server (or Windows XP
Professional). However, you must install and configure it. I am not
an IT or web administrator so it took me a while to learn, but
amazingly I got it to work if you're patient and follow the steps.
(I'm speaking of both IIS and Robohelp Server) Clearly IIS
configuration is not a trivial thing and it is assumed that an
author would have help and cooperation from the IT or Web Admin
folks.
As for customizing reports. At present, the existing reports
are the only ones offered. Since these reports are generated from a
database (Access, SQL Server or Oracle) I would think (haven't done
it myself) that someone familiar with database adminstration could
open the DB (after a backup that is) and be more creative with
generating customized reports.
You are right that the "Question" does in fact mean any
search term or phrase that an end user puts in the search field.
This is the string that is stored and reported as a question. In
discussing this with the Adobe team at STC last month, they agreed
that this was definitely a holdover from the legacy software and is
due for a change sometime in the future.
To answer your other question, text entered in the Index
field is not stored in the database, only the search term field.
Since taking on the old legacy product from eHelp and
Macromedia, Adobe is focusing most of its attention on beefing up
the client authoring app for the next version (Adobe RoboHelp 7).
My assumption is that they are keen on improving the RoboHelp
Server as well. I have passed along many feature requests along the
lines you seem to suggest and hopefully the server will evolve
along with the client app.
Even with its limitations, my clients tell me RoboHelp Server
provides very useful feedback to help them improve their knowledge
base content to make it more helpful and responsive to users needs.
They also like the searchability of PDF, Word, PPT and Excel as
well...something which plain WebHelp without the RoboHelp Server
does not do.
I probably didn't get to everything, but hope this helps.
John

Need info about max HDD size available for Satellite Pro M30-813

Hello,
The following question is mainly to be addressed to authorized Toshiba support personnel. What exactly is the limitation of a maximum size of an internal HDD that I could use with my Satellite Pro M30-813?
Recently, I have bought and installed seagate 160 GB SATA drive, onto which I have successfully installed WXP Pro and have been running it for quite a while with no problems. Recently, I have been copying large amount of data from an external hard drive to my new internal disk, and as the files were being copied as I noticed having about 50 GB free space left, I had experienced windows "delayed write failed" and a massive partition failure with no possibility to recover data. The system would no longer boot and the whole MBR was damaged. As the result, I have lost all data on my new disk.
Although, I realize that Toshiba is not responsible for additional hardware that I use with my laptop and that is not officially supported by Toshiba, I am certain that as an end user of a Toshiba product I have the right to know about a max HDD size limitation information for my notebook model. Therefore, I request Toshiba technical support representative to give me a straight official answer to my question.
Thank you in advance,
Andrejs
(You may also contact me privately at my e-mail address)

Hi Andrew
> The following question is mainly to be addressed to authorized Toshiba support personnel
I think you are in the wrong area if you are looking for an answer from an authorized Toshiba support.
This is a Toshiba user-to-user forum! You will meet here Toshiba notebook owner and enthusiasts who share knowledge and tries solve problems but nobody from Tosh :(
I could provide my experience with the M30 Satellite and the HDD upgrade possibilities.
In my knowledge the Sat M30 supports a 40GB, 60GB and 80GB HDD for sure.
In my opinion you could use the 100GB HDD but bigger HDDs will not run and functions correctly.
So switch to a lower HDD size and enjoy the notebook!
Ive goggled a little bit and found compatible HDD and the part numbers
HITACHI GBC000Z810 -> 80GB
HITACHI GBC00014810 -> 80GB
TOSHIBA HDD2188B -> 80GB
HITACHI G8C0000Z610 -> 60GB
HITACHI G8BC00013610 -> 60GB
TOSHIBA HDD2183 -> 60GB
TOSHIBA HDD2184 -> 60GB
I hope this could help you a little bit!
Best regards

Need detailed info about Active,New and Change log table in BI 7.0

Dear Experts,
I am new to this technology. Can you any one explain in very detail about ACTIVE, NEW and CHANGE LOG tables workflows.
And also i am requesting you all to give tips to how to study BI 7.0
Regards,
Ameer.N

For your first problem solution is this note: 936644
You might have not mapped the filed in your tarnsfer/update rules?

Need info about 2006s(5.1/5.2)

Hi,
Need some info about the new product 2006s (5.1/5.2), what are the new features, whats new on the technology side, what skill sets will be required for these products.
is GUI/SPRO still there in the new products or some new config tool is being introduced.
any info is helpful, pls share usefull docs, links to SAP docs.
pls email me at [email protected]
thanks
RH

Hi rh,
The theory is a new interface, replace gui an pcui. The configuration is based in business roles and this configuration is with spro customizing. Web Client tecnology based and the most important news is a new configuration tool to modify the layout.
Regards.
Manuel

Info about oracle 7 and forms

I need manual or info about forms. I use a forms with oracle 7
over AIX.
thank in advance
gabriel

Are you after any specific info releated to Forms and/or Oracle
7?
sandeep

Need info about GN_INVOICE_CREATE

Hi experts!
I need to create Credit / Debit memo invoices in my Z program, so I decided to use GN_INVOICE_CREATE for this, but can not find info about parametres of this FM....
could anyone explaine how to use this FM or maybe someone has a peace of sample code of using this FM?
Helpful answers and advices will be rewarded.
Here is this FM:
CALL FUNCTION 'GN_INVOICE_CREATE'
EXPORTING
    DELIVERY_DATE           =
    INVOICE_DATE              =
    INVOICE_TYPE              =
    PRICING_DATE              =
    VBSK_I                          =
    WITH_POSTING              =
    CALLER_TYPE               =
    I_WITHOUT_REFRESH    =
    ID_NO_ENQUEUE           =
    ID_KVORG                      =
    ID_NO_DIALOG                =
    ID_NEW_CANCELLATION =
IMPORTING
    VBSK_E                           =
TABLES
    XKOMFK                           =
    XKOMFKGN                      =
    XKOMFKKO                      =
XKOMFKTX                         =
    XKOMV                             =
    XTHEAD                            =
    XVBFS                              =
    XVBPA                              =
    XVBRK                              =
    XVBRP                              =
    XVBSS                              =
XKOMFKZM                         =
SUCCESS_DOC_OUT          =          .

Hi Mindaugas,
check BAPIinvoice in SE37, e, here u cannt directly make use of GN_invoice_create, Bcos here u dont have condition records data.
so search in SE37 or Tcode BAPI , here u can get FMs along with Documentations.
Regards
Peram

Need info about programming with InCopy

Hi,
I have a client who has stored thousands of InCopy documents with valid styles applied to segments of it.
Now my requirement is to create a template which has XML tag -> Style mapping.
Considering that template, I am suppose to open all the InCopy documents, apply that Tag -> Style mapping to it and then convert all of them to XML and persist the data in DB.
Is there a programmatic way as to apply XML tags to a document based on the styles used?
Please educate. I am a complete newbie to InCopy - so please bare with my questions,
Thank you, Appreciate your help.
Regards,
Chintan

You could download and deploy "struts-example.war" from apache website.
          [That Struts 1.0.2 I think.]
          ---Nam
          Jordy wrote:
          > I want to find out how to use it with WL 7.0. Would anyone give me any info about it? :) Thanks
          And God said
          Let there be numbers
          And there were numbers.
          Odd and even created he them,
          He said to them be fruitful and multiply,
          And he commanded them to keep the laws of induction.
          [Bill Taylor [email protected]]
          [nam_nguyen.vcf]

Need info about HDD adaptor and Vista utilities installation on Equium A110

Similar Messages

Maybe you are looking for