Need info about Safety lead time in material master

Hi,
Safety lead time in material master is used to bring requirements forward.
we define this time in terms of days.
I tried to use this field, but system is not bringing the requirements forward.
System is planning material as other raw materials.
The requirement dates for raw materials without safety lead time and with safety lead time are same.
Can anybody explain, how it works and how we can alalyze the results with example.
Is there other settings we need to do ?
Regards,
Mahesh

Hi James,
Thanks for reply.
I have defined safety lead time, in the MRP 2 view. But still, sytem is not bringing the requirements forward.
Can you please tell me, is there any other setting I need to do ?
Regards,
Mahesh

Similar Messages

Need Info about BW CRM Analytics

Hi all,
Guys,
Please help me out...
I need Info about BW with CRM Analytics
What are the core areas where data's are extracted for CRM to BW
What will be the Interview question related to BW CRM Analytics
If possible if u have any docs kindly email me at [email protected]
Thanks in Advance.
Jaffer Ali.S

Dear Jaffer Ali S.,
The following types of analyses can be carried out:
CRM Lead Analysis
Use the InfoCube CRM Lead Management (Technical Name: 0MKTG_C01) for reporting.
The Lead Management InfoCube contains all the characteristics and data used for the administration of leads. This InfoCube enables you to execute the following standard queries available in SAP BW:
Channel Analysis
Efficiency Reporting
Historical Evaluation
Lost Leads
Channel Management: Top-n Lost Leads (Current Year)
CRM Activities Analysis
Use the InfoCube CRM Activities (Technical Name 0CSAL_C01) for reporting.
The InfoCube for activities in CRM provides the data basis for evaluating business activities undertaken by your employees. It provides you with information about how much time is being spent on contacting the customer, whether customers actively seek out contact with your company and how intensively your employees look after your customers. It delivers data for queries such as:
Intensity of customer care
Activity History
Success/failure analysis
Customer Interaction Center (CIC)
Activate the InfoCube Interactive Scripting Evaluation (IC WinClient) 0CRM_CIC1.
Interactive Scripting Evaluation (IC WinClient)
This InfoCube provides the data base for the interactive scripting evaluation. It supplies the data to the Interaction Center (IC): Interactive Scripting Evaluation query.
Opportunities Analysis
Activate InfoCube 0CRM_C04 - Opportunities.
The CRM Opportunities InfoCube contains all the characteristics and data used for the opportunities analyses.
Sales Order Complaints Analysis
Activate InfoCube Complaints (Technical name: 0CSAL_C09).
You can carry out the complaint analysis on a daily, monthly, weekly or a quarterly basis. The analysis can be done in relation to CRM Service Organization, CRM Sales Organization, CRM Product, and Sold-To Party.
Service Qualtiy Analysis
Activate the MultiProvider 0CSRVMC04 - CRM Service - Orders and Confirmations with Complaints.
The MultiProvider 0CSRVMC04 - CRM Service - Orders and Confirmations with Complaints gets the data from the following ODS objects for analyses in various queries:
0CRM_PROI - Orders: Item Data
0CRM_COI - Controlling (Item Data)
0CRM_CNFI - Confirmations (Item Data)
0CRM_COMP - CRM Complaints (Items)
Let me know if you need further help.
Reward points if it helps.
Regards,
Naveen.

I need info about CL_XML_DOCUMENT

Hi to all,
I need info about the class CL_XML_DOCUMENT and his methods.
I only have seen information of a few methods.
Where can I find more information and examples of use about this class?

Hi,
This question is already answered before in this forum, check out the below link -
Information about CL_XML_DOCUMENT
Hope this helps.

Re: report for lead time of material

Dear Gurus,
I just want to know is there report to see the lead time of material. Kindly suggest me which is the t-code available
Regards,
Rajashekar

Hi,
You can see the lead time in Report- MCE7 (T Code) for material analysis, here yo will get lead time delivery time of material as per Material group, Vendor,purchase Org. If you want to get material number ,after results displayed choose from menu settings > characteristic display > key & description (or just key) , then
choose from menu settings > column width and extend the length to e.g. 59 (18 material number + space + 40 description)An alternative way is building query taking into consideration Table MARC. Thanking you.

Planned delivery time in material master

Is planned delivery time in material master considering holidays ? I mean when I say 7 days, is it one week and 2 days or only one week ?

Dear Balaji,
If you push F1 when your mouse is set on that field you will see that help says that PDT is defined as calendar days. However, you can carry out some changes:
http://www.sap-img.com/materials/planned-delivery-time-as-workdays.htm
About meaning of PDT:
http://www.sap-img.com/production/calculation-to-determine-the-delivery-date-and-release-date.htm
In addition to that link, you can use safety time as well (with this setting you can pull back in time the requested availabilty date during MRP run). You can also use PDT in info records if you have several source of supple for one material.
BR
Csaba

Lead Time in Item Master

Hi
Does Lead Time in Item Master respect weekends and only count working days?
Meaning, for two weeks do I enter 10 or 14?
Thanks
Franz

Hi Franz
As far as I know, NO. You only have the option to include holidays in the MRP wizard itself which will then calculate against lead times. Best would be to test on a test database with both scenarios (with 10 or 14, and tick/untick holidays in MRP) and see what the results are.
According to the Online Help the above is correct:
Consider Holiday Table for Production Planning Factors in holidays and weekends in lead time calculation, as defined in the Holiday Details window. Holidays and weekends increase the lead time interval for MRP calculations.
Consider Holiday Table for Purchase Planning Factors in holidays and weekends in lead time calculations, as defined in the Holiday Details window. Holidays and weekends increase the lead time interval for MRP calculations.
Kind regards
Peter Juby

Mass change in In house Production Time in Material master

Hello Frinds,
I am dooing mass change in Inhouse Production time in material master By using MM17
field is MARC-DZEIT
i am putting Material ,Plant & in house Production time & after execution it shows following MSG.
No data meet the selection criteria
Message no. M&107
Where i m wrong weather my Varient is not created Properly ,Pour some light on it ,if i m wrong tell me the way of dooing mass change in ECC6.0 ,LSMW & DBC is next Option ,i want to do it with MM17
Regards ,
Girish

Dear Girish,
Goto MM17--->click on Fields tab page,select the field MARC-DZEIT and then clcik on execute button.
In the next screen,either input the material ,plant combination or else input the plant and click on
execute button.
Now enter the inhouse production time in the new values say 2 days,Either select the materials for
which this new change has to be made or else select all the list of materials and click on mass change
icon and check the results and save the datas.
Regards
Mangalraj.S

Need info about RH Server 6 and reports

I'm interisted in RH Server 6 but I'm unable to locate much
practical info about it on the Web site, and a call to sales didn't
help. I need to know what I'm getting us into before I contribute
our $2,000. Can anyone provide this information or point me to its
location on the site:
--I have system requirements from the Adobe site, but what is
the "server" and what does installation and setup entail? About how
how long does it take, or how difficult, to achieve operability?
--According to a piece by John Daigle, the server component
should be installed on a Windows server running IIS 5+. Is IIS a
separate software or standart part of Windows server? If separate,
what preparation should that server have before the installation in
addition to installation of IIS?
--I know nothing about security/firewall protocols. We will
have our own and our customer firewalls to navigate. Are the server
setup instructions adequate for setting all that up? Or are
purchasers expected to have sys admins knowledgeable to set that
up? Is that applied to the RH server or the Windows server? if RH
server, how can I get a copy of instructions for my system people
to review?
--Have users found the RH server/RoboEngine reliable, once
it's operable?
--Is it true that the usage reports aren't customizable? Can
additional usage data be specified in the RH server?
--These report summaries are vague--Areas Requiing Help,
Frequently Viewed Content--stating only that repoorts show the
suchandsuch done "most frequently" or "most often." Does that mean
the top 3, 5, 10 or what? Is there a way to track all of that
activity from most to least?
--The summaries of the reports Unanswered Questions and
Frequently Asked Questions say that terms entered in the Search
field are identified. Questions and terms aren't the same in my
book--am I right that it captures anything entered? Can it do the
same for the Index field?
--I saw no RH server under downloads, or maybe missed it.
Correct in guessing that a demo version is not available?
--Is RH server user doc available on the web site? I found
the Getting Started gude, which isn't much use in evaluating the
product.
I have additional questions, but if you can answer these
questions or direct me to answers some of those may be covered.
Thanks,
Mike
Access database.

Hey, Mike!
I found a few things for you. I'm in a hurry, so I'll list
them quickly.
For the Trial, go to the Adobe downloads page
http://www.adobe.com/downloads/
Then select RoboHelp Server 6 from the dropdown list. You
will be asked to register (free) if you haven't already. When you
arrive at the download page make sure you note the Trial Serial #
To make it easier for you, its:
1336-1033-2628-5062-0993-4570
You can also find a RoboHelp Server 6 Getting Started Guide
here
http://www.adobe.com/support/robohelp/downloads/getting_started_rh6_server.pdf
You were asking about IIS. Yes. As Colum says, this comes
with virtually any version of Windows Server (or Windows XP
Professional). However, you must install and configure it. I am not
an IT or web administrator so it took me a while to learn, but
amazingly I got it to work if you're patient and follow the steps.
(I'm speaking of both IIS and Robohelp Server) Clearly IIS
configuration is not a trivial thing and it is assumed that an
author would have help and cooperation from the IT or Web Admin
folks.
As for customizing reports. At present, the existing reports
are the only ones offered. Since these reports are generated from a
database (Access, SQL Server or Oracle) I would think (haven't done
it myself) that someone familiar with database adminstration could
open the DB (after a backup that is) and be more creative with
generating customized reports.
You are right that the "Question" does in fact mean any
search term or phrase that an end user puts in the search field.
This is the string that is stored and reported as a question. In
discussing this with the Adobe team at STC last month, they agreed
that this was definitely a holdover from the legacy software and is
due for a change sometime in the future.
To answer your other question, text entered in the Index
field is not stored in the database, only the search term field.
Since taking on the old legacy product from eHelp and
Macromedia, Adobe is focusing most of its attention on beefing up
the client authoring app for the next version (Adobe RoboHelp 7).
My assumption is that they are keen on improving the RoboHelp
Server as well. I have passed along many feature requests along the
lines you seem to suggest and hopefully the server will evolve
along with the client app.
Even with its limitations, my clients tell me RoboHelp Server
provides very useful feedback to help them improve their knowledge
base content to make it more helpful and responsive to users needs.
They also like the searchability of PDF, Word, PPT and Excel as
well...something which plain WebHelp without the RoboHelp Server
does not do.
I probably didn't get to everything, but hope this helps.
John

Need info about 2006s(5.1/5.2)

Hi,
Need some info about the new product 2006s (5.1/5.2), what are the new features, whats new on the technology side, what skill sets will be required for these products.
is GUI/SPRO still there in the new products or some new config tool is being introduced.
any info is helpful, pls share usefull docs, links to SAP docs.
pls email me at [email protected]
thanks
RH

Hi rh,
The theory is a new interface, replace gui an pcui. The configuration is based in business roles and this configuration is with spro customizing. Web Client tecnology based and the most important news is a new configuration tool to modify the layout.
Regards.
Manuel

Need info about GN_INVOICE_CREATE

Hi experts!
I need to create Credit / Debit memo invoices in my Z program, so I decided to use GN_INVOICE_CREATE for this, but can not find info about parametres of this FM....
could anyone explaine how to use this FM or maybe someone has a peace of sample code of using this FM?
Helpful answers and advices will be rewarded.
Here is this FM:
CALL FUNCTION 'GN_INVOICE_CREATE'
EXPORTING
    DELIVERY_DATE           =
    INVOICE_DATE              =
    INVOICE_TYPE              =
    PRICING_DATE              =
    VBSK_I                          =
    WITH_POSTING              =
    CALLER_TYPE               =
    I_WITHOUT_REFRESH    =
    ID_NO_ENQUEUE           =
    ID_KVORG                      =
    ID_NO_DIALOG                =
    ID_NEW_CANCELLATION =
IMPORTING
    VBSK_E                           =
TABLES
    XKOMFK                           =
    XKOMFKGN                      =
    XKOMFKKO                      =
XKOMFKTX                         =
    XKOMV                             =
    XTHEAD                            =
    XVBFS                              =
    XVBPA                              =
    XVBRK                              =
    XVBRP                              =
    XVBSS                              =
XKOMFKZM                         =
SUCCESS_DOC_OUT          =          .

Hi Mindaugas,
check BAPIinvoice in SE37, e, here u cannt directly make use of GN_invoice_create, Bcos here u dont have condition records data.
so search in SE37 or Tcode BAPI , here u can get FMs along with Documentations.
Regards
Peram

Need info about stream cipher

Hi every one
I need information about the following stream cipher,
.py
.RC4
any body knows about then, please pass me link/material.
Thanks

Syed,
RC4 is stream cipher designed by Rivest for RSA Data Security, Inc. It is a variable key-size stream cipher with byte-oriented operations. The algorithm is based on the use of a random permutation.
http://www.rsasecurity.com/rsalabs/node.asp?id=2174
http://en.wikipedia.org/wiki/Stream_cipher
.Py
http://en.wikipedia.org/wiki/Py_(cipher)
I hope the above information helps.
Regards,
Arul
** Please rate all helpful posts **

Needed info about io devices and cpu without using prtdiag

Hi
I need to collect info about io devices and cpu. but i cannot use prtdiag.
is there any way to collect this information on solaris machine....
may any available c APIs
Thanks in advance.
Nagesh

yep.... prtconf -vp | grep <wot u r looking 4>

Need info about programming with InCopy

Hi,
I have a client who has stored thousands of InCopy documents with valid styles applied to segments of it.
Now my requirement is to create a template which has XML tag -> Style mapping.
Considering that template, I am suppose to open all the InCopy documents, apply that Tag -> Style mapping to it and then convert all of them to XML and persist the data in DB.
Is there a programmatic way as to apply XML tags to a document based on the styles used?
Please educate. I am a complete newbie to InCopy - so please bare with my questions,
Thank you, Appreciate your help.
Regards,
Chintan

You could download and deploy "struts-example.war" from apache website.
          [That Struts 1.0.2 I think.]
          ---Nam
          Jordy wrote:
          > I want to find out how to use it with WL 7.0. Would anyone give me any info about it? :) Thanks
          And God said
          Let there be numbers
          And there were numbers.
          Odd and even created he them,
          He said to them be fruitful and multiply,
          And he commanded them to keep the laws of induction.
          [Bill Taylor [email protected]]
          [nam_nguyen.vcf]

Need Info about using Strut with WL 7.0

I want to find out how to use it with WL 7.0. Would anyone give me any info about it? :) Thanks


You could download and deploy "struts-example.war" from apache website.
          [That Struts 1.0.2 I think.]
          ---Nam
          Jordy wrote:
          > I want to find out how to use it with WL 7.0. Would anyone give me any info about it? :) Thanks
          And God said
          Let there be numbers
          And there were numbers.
          Odd and even created he them,
          He said to them be fruitful and multiply,
          And he commanded them to keep the laws of induction.
          [Bill Taylor [email protected]]
          [nam_nguyen.vcf]

Need Info About Document Management System

Hi All,
I need information about Document Management system.
How it is linked with KM
Thanks
Arun

Hi Arun,
DMS is available in R/3 Systems as a individual module and can be linked with KM using DMS Connector for KM. Find the links below..
Check this out...
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/30/08a037b9e62417e10000009b38f889/frameset.htm">DMS</a>
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=26682">Thread 1</a>
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=235959">Thread 2</a>
Hope this helps.
Regards,
Venkat.

Need info about Safety lead time in material master

Similar Messages

Maybe you are looking for