Need info about Serena Collage and Netweaver 04 WEBAS
Is anyone using SERENA Collage with Netweaver Web Application server? I have some deployment questions. Any assistance is appreciated.
Hi Ravikumar
you can check the following whitepaper
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/eac9cf35-0801-0010-918b-ab231eba0bd0
and the verify the following
http://help.sap.com/saphelp_nwce10/helpdata/en/45/51b5d88a853bdce10000000a1553f7/content.htm
if it helpful reward points are appreciated
Similar Messages
-
Needed info about io devices and cpu without using prtdiag
Hi
I need to collect info about io devices and cpu. but i cannot use prtdiag.
is there any way to collect this information on solaris machine....
may any available c APIs
Thanks in advance.
Nageshyep.... prtconf -vp | grep <wot u r looking 4>
-
Need info about HDD adaptor and Vista utilities installation on Equium A110
I own an Equium A110-233 (PSAB2E), and I recently upgraded to Vista after installing 2GB of RAM. However, I found myself a little short of hard drive space and treated myself to a new 120GB HDD. However, it seems that the computer has an edge connector interface, as does the existing Hitachi TravelStar HDD - it doesn't look like there's an adaptor plug on the drive. Does anyone know where I can get an adaptor for my "traditional" 40-pin hard drive?
After installing Vista and reflashing my BIOS, I reiinstalled ConfigFree and the Value Added Package (amongst other drivers). However, running ConfigFree always leads to a crash with the BSOD ID "NO_MORE_IRC_STACK_LOCATIONS".
As for the VAP, I wanted it mainly for Power Saver. However, searching for it gives only "Power Saver Help".
Can anyone give me any pointers here? Thanks.Hi,
did you know that you have a serial-ata drive in your machine which is not compatible to the IDE standard (40 pin)? You wont get an adaptor from 40 pin to serial ATA, because SATA is a completely different technology to IDE.
You will have to return the harddrive you purchased and buy a serial-ata drive, which will fit in your machine.
A little idea from my side regarding your BSOD:
Download the powersaver and the configfree for vista from the internet (this is a good address: http://209.167.114.38/support/Download/ln_byModel.asp) and reistall that stuff, maybe it helps.
Greets -
Need Info about BW CRM Analytics
Hi all,
Guys,
Please help me out...
I need Info about BW with CRM Analytics
What are the core areas where data's are extracted for CRM to BW
What will be the Interview question related to BW CRM Analytics
If possible if u have any docs kindly email me at [email protected]
Thanks in Advance.
Jaffer Ali.SDear Jaffer Ali S.,
The following types of analyses can be carried out:
<b>CRM Lead Analysis</b>
Use the InfoCube CRM Lead Management (Technical Name: 0MKTG_C01) for reporting.
The Lead Management InfoCube contains all the characteristics and data used for the administration of leads. This InfoCube enables you to execute the following standard queries available in SAP BW:
Channel Analysis
Efficiency Reporting
Historical Evaluation
Lost Leads
Channel Management: Top-n Lost Leads (Current Year)
<b>CRM Activities Analysis</b>
Use the InfoCube CRM Activities (Technical Name 0CSAL_C01) for reporting.
The InfoCube for activities in CRM provides the data basis for evaluating business activities undertaken by your employees. It provides you with information about how much time is being spent on contacting the customer, whether customers actively seek out contact with your company and how intensively your employees look after your customers. It delivers data for queries such as:
Intensity of customer care
Activity History
Success/failure analysis
<b>Customer Interaction Center (CIC)</b>
Activate the InfoCube Interactive Scripting Evaluation (IC WinClient) 0CRM_CIC1.
Interactive Scripting Evaluation (IC WinClient)
This InfoCube provides the data base for the interactive scripting evaluation. It supplies the data to the Interaction Center (IC): Interactive Scripting Evaluation query.
<b>Opportunities Analysis</b>
Activate InfoCube 0CRM_C04 - Opportunities.
The CRM Opportunities InfoCube contains all the characteristics and data used for the opportunities analyses.
<b>Sales Order Complaints Analysis</b>
Activate InfoCube Complaints (Technical name: 0CSAL_C09).
You can carry out the complaint analysis on a daily, monthly, weekly or a quarterly basis. The analysis can be done in relation to CRM Service Organization, CRM Sales Organization, CRM Product, and Sold-To Party.
<b>Service Qualtiy Analysis</b>
Activate the MultiProvider 0CSRVMC04 - CRM Service - Orders and Confirmations with Complaints.
The MultiProvider 0CSRVMC04 - CRM Service - Orders and Confirmations with Complaints gets the data from the following ODS objects for analyses in various queries:
0CRM_PROI - Orders: Item Data
0CRM_COI - Controlling (Item Data)
0CRM_CNFI - Confirmations (Item Data)
0CRM_COMP - CRM Complaints (Items)
Let me know if you need further help.
Reward points if it helps.
Regards,
Naveen. -
I need info about CL_XML_DOCUMENT
Hi to all,
I need info about the class CL_XML_DOCUMENT and his methods.
I only have seen information of a few methods.
Where can I find more information and examples of use about this class?Hi,
This question is already answered before in this forum, check out the below link -
Information about CL_XML_DOCUMENT
Hope this helps. -
hello .. i am using mavericks OS and it is showing it needs updates about 800 meg. and every time i download that it dosent do anything and again it is beginig to download again and again that.. please help me. the update is 10.9.2
To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step. -
I cannot install my ipod to my computer. Says something about the device driver. I did not get it new either and so have no info about it. And I have never used one before and have no friends who have either. Can someone help me?
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem -
Need info about RH Server 6 and reports
I'm interisted in RH Server 6 but I'm unable to locate much
practical info about it on the Web site, and a call to sales didn't
help. I need to know what I'm getting us into before I contribute
our $2,000. Can anyone provide this information or point me to its
location on the site:
--I have system requirements from the Adobe site, but what is
the "server" and what does installation and setup entail? About how
how long does it take, or how difficult, to achieve operability?
--According to a piece by John Daigle, the server component
should be installed on a Windows server running IIS 5+. Is IIS a
separate software or standart part of Windows server? If separate,
what preparation should that server have before the installation in
addition to installation of IIS?
--I know nothing about security/firewall protocols. We will
have our own and our customer firewalls to navigate. Are the server
setup instructions adequate for setting all that up? Or are
purchasers expected to have sys admins knowledgeable to set that
up? Is that applied to the RH server or the Windows server? if RH
server, how can I get a copy of instructions for my system people
to review?
--Have users found the RH server/RoboEngine reliable, once
it's operable?
--Is it true that the usage reports aren't customizable? Can
additional usage data be specified in the RH server?
--These report summaries are vague--Areas Requiing Help,
Frequently Viewed Content--stating only that repoorts show the
suchandsuch done "most frequently" or "most often." Does that mean
the top 3, 5, 10 or what? Is there a way to track all of that
activity from most to least?
--The summaries of the reports Unanswered Questions and
Frequently Asked Questions say that terms entered in the Search
field are identified. Questions and terms aren't the same in my
book--am I right that it captures anything entered? Can it do the
same for the Index field?
--I saw no RH server under downloads, or maybe missed it.
Correct in guessing that a demo version is not available?
--Is RH server user doc available on the web site? I found
the Getting Started gude, which isn't much use in evaluating the
product.
I have additional questions, but if you can answer these
questions or direct me to answers some of those may be covered.
Thanks,
Mike
Access database.Hey, Mike!
I found a few things for you. I'm in a hurry, so I'll list
them quickly.
For the Trial, go to the Adobe downloads page
http://www.adobe.com/downloads/
Then select RoboHelp Server 6 from the dropdown list. You
will be asked to register (free) if you haven't already. When you
arrive at the download page make sure you note the Trial Serial #
To make it easier for you, its:
1336-1033-2628-5062-0993-4570
You can also find a RoboHelp Server 6 Getting Started Guide
here
http://www.adobe.com/support/robohelp/downloads/getting_started_rh6_server.pdf
You were asking about IIS. Yes. As Colum says, this comes
with virtually any version of Windows Server (or Windows XP
Professional). However, you must install and configure it. I am not
an IT or web administrator so it took me a while to learn, but
amazingly I got it to work if you're patient and follow the steps.
(I'm speaking of both IIS and Robohelp Server) Clearly IIS
configuration is not a trivial thing and it is assumed that an
author would have help and cooperation from the IT or Web Admin
folks.
As for customizing reports. At present, the existing reports
are the only ones offered. Since these reports are generated from a
database (Access, SQL Server or Oracle) I would think (haven't done
it myself) that someone familiar with database adminstration could
open the DB (after a backup that is) and be more creative with
generating customized reports.
You are right that the "Question" does in fact mean any
search term or phrase that an end user puts in the search field.
This is the string that is stored and reported as a question. In
discussing this with the Adobe team at STC last month, they agreed
that this was definitely a holdover from the legacy software and is
due for a change sometime in the future.
To answer your other question, text entered in the Index
field is not stored in the database, only the search term field.
Since taking on the old legacy product from eHelp and
Macromedia, Adobe is focusing most of its attention on beefing up
the client authoring app for the next version (Adobe RoboHelp 7).
My assumption is that they are keen on improving the RoboHelp
Server as well. I have passed along many feature requests along the
lines you seem to suggest and hopefully the server will evolve
along with the client app.
Even with its limitations, my clients tell me RoboHelp Server
provides very useful feedback to help them improve their knowledge
base content to make it more helpful and responsive to users needs.
They also like the searchability of PDF, Word, PPT and Excel as
well...something which plain WebHelp without the RoboHelp Server
does not do.
I probably didn't get to everything, but hope this helps.
John -
Need detailed info about Active,New and Change log table in BI 7.0
Dear Experts,
I am new to this technology. Can you any one explain in very detail about ACTIVE, NEW and CHANGE LOG tables workflows.
And also i am requesting you all to give tips to how to study BI 7.0
Regards,
Ameer.NFor your first problem solution is this note: 936644
You might have not mapped the filed in your tarnsfer/update rules? -
Need info about 2006s(5.1/5.2)
Hi,
Need some info about the new product 2006s (5.1/5.2), what are the new features, whats new on the technology side, what skill sets will be required for these products.
is GUI/SPRO still there in the new products or some new config tool is being introduced.
any info is helpful, pls share usefull docs, links to SAP docs.
pls email me at [email protected]
thanks
RHHi rh,
The theory is a new interface, replace gui an pcui. The configuration is based in business roles and this configuration is with spro customizing. Web Client tecnology based and the most important news is a new configuration tool to modify the layout.
Regards.
Manuel -
I need manual or info about forms. I use a forms with oracle 7
over AIX.
thank in advance
gabrielAre you after any specific info releated to Forms and/or Oracle
7?
sandeep -
Need info about GN_INVOICE_CREATE
Hi experts!
I need to create Credit / Debit memo invoices in my Z program, so I decided to use GN_INVOICE_CREATE for this, but can not find info about parametres of this FM....
could anyone explaine how to use this FM or maybe someone has a peace of sample code of using this FM?
Helpful answers and advices will be rewarded.
Here is this FM:
CALL FUNCTION 'GN_INVOICE_CREATE'
EXPORTING
DELIVERY_DATE =
INVOICE_DATE =
INVOICE_TYPE =
PRICING_DATE =
VBSK_I =
WITH_POSTING =
CALLER_TYPE =
I_WITHOUT_REFRESH =
ID_NO_ENQUEUE =
ID_KVORG =
ID_NO_DIALOG =
ID_NEW_CANCELLATION =
IMPORTING
VBSK_E =
TABLES
XKOMFK =
XKOMFKGN =
XKOMFKKO =
XKOMFKTX =
XKOMV =
XTHEAD =
XVBFS =
XVBPA =
XVBRK =
XVBRP =
XVBSS =
XKOMFKZM =
SUCCESS_DOC_OUT = .Hi Mindaugas,
check BAPIinvoice in SE37, e, here u cannt directly make use of GN_invoice_create, Bcos here u dont have condition records data.
so search in SE37 or Tcode BAPI , here u can get FMs along with Documentations.
Regards
Peram -
Need info about programming with InCopy
Hi,
I have a client who has stored thousands of InCopy documents with valid styles applied to segments of it.
Now my requirement is to create a template which has XML tag -> Style mapping.
Considering that template, I am suppose to open all the InCopy documents, apply that Tag -> Style mapping to it and then convert all of them to XML and persist the data in DB.
Is there a programmatic way as to apply XML tags to a document based on the styles used?
Please educate. I am a complete newbie to InCopy - so please bare with my questions,
Thank you, Appreciate your help.
Regards,
ChintanYou could download and deploy "struts-example.war" from apache website.
[That Struts 1.0.2 I think.]
---Nam
Jordy wrote:
> I want to find out how to use it with WL 7.0. Would anyone give me any info about it? :) Thanks
And God said
Let there be numbers
And there were numbers.
Odd and even created he them,
He said to them be fruitful and multiply,
And he commanded them to keep the laws of induction.
[Bill Taylor [email protected]]
[nam_nguyen.vcf]
-
Need Info about using Strut with WL 7.0
I want to find out how to use it with WL 7.0. Would anyone give me any info about it? :) Thanks
You could download and deploy "struts-example.war" from apache website.
[That Struts 1.0.2 I think.]
---Nam
Jordy wrote:
> I want to find out how to use it with WL 7.0. Would anyone give me any info about it? :) Thanks
And God said
Let there be numbers
And there were numbers.
Odd and even created he them,
He said to them be fruitful and multiply,
And he commanded them to keep the laws of induction.
[Bill Taylor [email protected]]
[nam_nguyen.vcf]
-
Need Info About Document Management System
Hi All,
I need information about Document Management system.
How it is linked with KM
Thanks
ArunHi Arun,
DMS is available in R/3 Systems as a individual module and can be linked with KM using DMS Connector for KM. Find the links below..
Check this out...
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/30/08a037b9e62417e10000009b38f889/frameset.htm">DMS</a>
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=26682">Thread 1</a>
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=235959">Thread 2</a>
Hope this helps.
Regards,
Venkat.
Maybe you are looking for
-
this error comes up everytime i try to install itunes or any apple product in windows 7. I have verified everything with windows and its registered and still there is no success.
-
How to change the Subject line of the mail when PO is sent to a vendor
Hi, I wanted to send PO through Email.All the settings have been done and the output goes fine. I wanted to change the text in the title and hence have set the programme as SAPMM06E and Form Routine as TEXT_SYMBOL_REPLACE . After setting ,NAST table
-
I tried refilling my account today with a $14 dollar voucher, making payment from my PayPal account. On each attempt, it reported failure, and immediately following my Skype balance remained unchanged. 3 hours following, my PayPal account shows 3 cha
-
InDesign CS3 becomes verrrry sluggish....
Hello Does anyone else suffer with InDesign becoming slower as you work?? I'm currently working on a 24 page doc, with lots of images (although not set to 'high quality display', but after a while it just slows right down having a delay of 3-5 second
-
I am making a GUI for a little software game. But i have a problem with my slider. I want to change the selection color from the tumb from the standard "beautiful" purple to another color. I've tried following settings , with UIManager.put("Slider.ba