Need info for Beginner in ADF Faces
Hie,,,
I am a total beginner in ADF and have even no background with JSF.
So, could anybody please point me to some resources talking about managed bean and all...
vik
I've published a dummies guide to JSF here
http://groundside.com/blog/GrantRonald.php?title=introducing_java_server_faces_to_4gl_dev&more=1&c=1&tb=1&pb=1
might help you a bit.
Regards
Grant
Similar Messages
-
I need forum for beginner learner in inventory purchase and SCM modules
I need forum for beginner learner in inventory purchase and SCM modules
Saging,
Hmmm. It seems a bit odd to be creating a 'forecasting-of-material-procurement' tool, when SAP has so many already built in, either within ERP or within APO. Oh well, I am sure there must be a good reason.
I have seen from our systems that most loads come from APO going to BI. Is it always that way?
BI type data can come from any source. The most common BI solutions I have seen is where BI data are extracted from the main ERP. However, the beauty of BI is that it doesn't care, SAP builds in functionality to get data from anywhere.
Are data from ECC considered as well?
They can be if you design it so.
You should be aware that most data existing in ERP that are relevant for material planning also usually exist in APO. The Core Interface between ERP and APO is normally set up to natively replicate substantial quantities of Master data and also transactional data. It may be that in your business environment, you really don't need to connect to anything other than APO. However, this is not a limitation of BI, it is just smart programming to try to minimize the number of sources of your data.
Best Regards,
DB49 -
Need info for COPA (Cost based profitability analysis)- Archiving objects
Hi All,
SAP have introduced new 2 Archiving objects COPAA_xxxx, and COPAB_xxxx instead of the old archiving object COPA1_xxxx.
Where xxxx = operating concern.
Can any one please give the document path how to archive the COPA data.
Means exactly i want the variant parameters for the 2 new archiving objects.
Please waiting for your reply...
Thanks,
NagendraHi Chandra sekhar,
I need to Archive the data in R/3 system & ECC6.0 not in BW system.
I want the steps how to Archive the 2 objects COPAA_xxxx, COPAB_xxxx in ECC6.0 System.
Please if have any info please help me...
Thanks,
Nagendra -
Need info for Implementing Service Analytics
Hi ,
My clicnet is planing to implementing service analytics, i would like to know the procedure is that where to start what to needs to be install.
We are going to use sibel applications and what are the things to taken care while installing a BI Apps for service analytics. We are plaing to instal 7.9.6.3
Please do let me know the procedure.
Regards,
Malli2 corrections :
a) Veera not verra
b) What I sent you is bi apps config guide that will have info related ebs,siebel, People soft and jde, check this link which is from 11 chapter as I said earlier
http://docs.oracle.com/cd/E20490_01/bia.7963/e19039/config_service_analytics.htm#BABBJFGB
I appreciate if you mark as correct -
I have a ZEN Micro and I've recently purchased a new laptop with Vista. Yep, that old chestnut. I've read a few postings but feel I need some more info. I currently have the latest firmware on the Micro ..0 and I've uninstalled the CD software but still my Zen is not compatible. When I plug the usb in the Zen fires up and the computer wants to install the relevant software, it then searches for software to download, doesn't find it and suggests contacting Creative. So, why does it still not recognise my Zen and what software should I have on the computer to access the media files?
Yves,
One of the things that is great about instrument drivers is the context help on each of the controls. You can turn the context help on with Ctrl+H and then hover you mouse cursor over the control. If you open "Configure Measurement.vi" and look at the help for the absolute resolution control you'll see a good description that includes:
Notes:
(1) The instrument driver ignores this parameter if the Range parameter is set to AG34405A_VAL_AUTO_RANGE_ON (-1) .
If you look at the help of the Range parameter you'll find see a similar discription with details and the following:
Defined Values:
AG34405A_VAL_AUTO_RANGE_OFF (-2) (-2.0) - Auto-Range Off
AG34405A_VAL_AUTO_RANGE_ON (-1) (-1.0) - Auto-Range On
Based on this, can you try setting the auto-range to -2 and specifying the absoulte resolution?
Regards,
Kamran -
Need info for installation of SAP XI on Windows server 2003
Hi All,
I need system requirement ( hardware and software) for the installation of SAP XI 3.0 only on Windows server 2003.
It would be great if anyone can share the installation steps.
Thanks in Advance...
Regards
VenkateshHi venkatesh,
Plesae go through these links.
Procedure to install :
http://help.sap.com/bp_bpmv130/Documentation/Installation/XI30InstallGuide.pdf
Configuration Guide
http://help.sap.com/bp_bpmv130/Documentation/Installation/Configuration_Guide_FP.pdf
A Beginner?s Guide to SAP XI Settings, Part I
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
Guide to SAP XI Settings, Part II
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34
General Configuration Steps
http://help.sap.com/saphelp_nw04/helpdata/en/cf/230240d981e469e10000000a155106/content.htm
SAP Exchange Infrastructure (XI) : Installation & CONFIGURATION GUIDE
http://help.sap.com/saphelp_nw04/helpdata/en/d7/f01a403233dd5fe10000000a155106/frameset.htm
Personal Settings
http://help.sap.com/saphelp_erp2004/helpdata/en/e9/c4cc9b03a422428603643ad3e8a5aa/content.htm
Roles and Tool Access : Administration, Technical Configuration,Design,Configuration,Monitoring
http://help.sap.com/saphelp_nw04/helpdata/en/89/05793c05f0807be10000000a11405a/content.htm
http://www.forumtopics.com/busobj/viewtopic.php?t=59586&start=15&postdays=0&postorder=asc
SLD:
How To?Handle the SLD for SAP XI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
How To?Handle Caches in SAP XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
Refer these post installation links
http://help.sap.com/saphelp_nw70/helpdata/en/a0/40084136b5f423e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
Link for posnt installation guide
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
https://websmp101.sap-ag.de/~sapidb/011000358700009389172004E.PDF
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
2004s PI installation - help.sap.com:
http://help.sap.com/saphelp_nw04s/helpdata/en/78/f59442062bcd6ae10000000a155106/frameset.htm -
Quick Start Guide Info not working. Need info for Job Interview
I am brand spanking new to Java but I have a job interview next week and this is one of the topics I need to learn a little about. Here is my issue if someone would kind enough to help.
I downloaded and installed SDK and JDK I am going through the quick start guide I am using the Quick Start guide that comes with Application Server PE 9. The quick start guide requires you to download a "Tutorial Bundle" that comes with the Java EE 5 Tutorial.
The Quick start guide then tells you to access certain files that are in the Tutorial bundle. For example it wants me to go to /Samples/Quickstart directory in the tutorial bundle and look for the hello.war. Unfortunately that directory and file does not exist (there is an /examples/web/hello1 directory but no hello.war
Long story short is there anyway to find a Tutorial Bundle that actually works with the software that I downloaded? Thanks in advance for your helpI found another guide. Thanks anyway
-
Hi need info for these programs
Hi ,
I am making a data upload for time management system wherein the time recording data is fetched .
I just came to know about these two programs ,
RPTCC106
SAPCDT45.
Can anyone please tell me, if we use these programs somehow if we r not having time evaluation in our scope . What I mean to say is we r not running the time evaluation program .
We are presently planning for a BDC , since our time recording device is not intelegent enough to manage the data . Can there be any other possible method for this upload as it needs to be scheduled for every hour ?
Regardshi,
correct answers are marked as **************
Tabstrip must contain which one of the following?
a) Menu
b) PAI
c)subscreen***********
d)GUI
e)PBO
which program can be used to release BDC sessions within a job?
Background jobs viewed in SM50 are of which process type?
a)DIA************
b)BTC
c)UPD
d)BKG
e)SPO
which one of the following transaction types is INVALID?
a)Report
b)Dialog
c)Variant
d)Modal
e)Area*************
which extension of the open statement is used to read in
raw data,such as a picture file(.jpg)?
a)in binary mode
b)in picture mode*******************
c)in text mode
d)in raw mode
e)in ASCII mode
which INCLUDE contains standard subroutines used in BDC program?
A)BDCRECXX
B)BDCSUBMIT
C)RSBDCSUB************
D)RSBDCINC
E)BDCINCLUDE -
Need info for adding wireless to wired setup
How do I add wireless to my wired setup? There is an imac, macbook Pro, and an HP laptop on a wired router. I expect to add ipod touch to the group. I don't know anything about wireless so I don't know what I need to know!
Any info would be welcome.Please be sure to check back if you do have any questions, especially before purchasing anything. Ken also offered another option and that would be to turn one of your Macs into a "software" router.
OS X has a built-in Internet sharing feature. Without having to buy any additional networking equipment, the Mac that has both Ethernet and AirPort capability could be used as a router. It is not full featured and it does not offer very good wireless security, but it may just be what you need in the mean time.
However, in the long run, I would recommend that you just get a WAP or an AirPort Express to provide the wireless network.
An example of a non-Apple WAP would be the Linkys/Cisco WAP610N. -
Need info .for connec.with golive 6.0 hosted on Apache serv.
We have built several sites under Golive 6.0 hosted on
Apache/2.2.3 (Unix) mod_ssl/2.2.3 OpenSSL/0.9.8b DAV/2 PHP/5.2.11 Server
Two of them work perfectly well with a connection to Mysql ver 4.1. hosted on a other server.
The 3rd one cannot connect to the database, the reason seems to be a virtual repertory on the server.(Amen server)
The site is redirected on a IP adresse . The XML files cannot be read. Would someone have an answer to this problemes.
Many thanks for your help.
KeithThank you Marian.
We are now on golive 6.01, and the first mistake wich occurs in the Golive scripts with are loaded on the Server for PHP language is :
<ERROR Number="2" Description="Error: "readdir(): supplied argument is not a valid Directory resource" on line 35 of /htdocs/public/www/config/info/ui6.php." />
We have set the friends to 0.0.0.0 0.0.0.0 for the moment
I understand now why the Golive must be > 6.0
Woull you like me to send to you the ini.php file set up on are server by are provider. We have total acess to this file
Here is the content of ui6.php
Line 35 is underlined
<?php
$GLparam = array(
* Arrange to send data in the UTF-8 charset.
'internal_encoding'=>'UTF-8',
'output_encoding'=>'UTF-8',
'content_type'=>'text/xml',
require_once("../include/utils.runtime6.php");
// Support for Customizable UI for DynamicLink
// ADOBE SYSTEMS INCORPORATED
// Copyright 2000-2002 Adobe Systems Incorporated. All Rights Reserved.
// NOTICE: Notwithstanding the terms of the Adobe GoLive End User
// License Agreement, Adobe permits you to reproduce and distribute this
// file only as an integrated part of a web site created with Adobe
// GoLive software and only for the purpose of enabling your client to
// display their web site. All other terms of the Adobe license
// agreement remain in effect.
header("Content-type: text/xml; charset=UTF-8");
$thisFilename = GetCurrentFile();
$packages = array();
$handle = opendir(dirname($thisFilename));
while ($file = readdir($handle)) {
if (ereg('(.*)\.ui([0-9]+)\.xml$', $file, $regs)) {
$thisPackageName = $regs[1];
$thisPackageVersion = $regs[2];
if ($thisPackageVersion > 100) {
$thisPackageVersion /= 100;
} else if ($thisPackageVersion > 10) {
$thisPackageVersion /= 10;
if ($thisPackageVersion > 6.0) {
continue;
if (isset($packages[$thisPackageName])) {
$package = $packages[$thisPackageName];
if ($thisPackageVersion > $package["version"]) {
$package["version"] = $thisPackageVersion;
$package["fullname"] = basename($file);
$package["path"] = $file;
$packages[$thisPackageName] = $package;
} else {
$package = array();
$package["name"] = $thisPackageName;
$package["version"] = $thisPackageVersion;
$package["fullname"] = basename($file);
$package["path"] = $file;
$packages[$thisPackageName] = $package;
closedir($handle);
echo "<ui6>\r\n\r\n";
while (list(, $package) = each($packages)) {
echo "\r\n\r\n<!-- " . $package["fullname"] . " -->\r\n\r\n";
readfile($package["path"]);
echo "</ui6>\r\n";
?>
Keith -
Access to needed info for a ChartItem custom renderer
I essentially am mimicking some code in the help files, an
example for using a 3-color repeating scheme with a ColumnChart. In
my case, however, I want to custom-color some circles in a
PlotChart.
I don't need a repeeating scheme, though. I need to be able
to choose the color based on information about the data itself. The
data originates from an HTTPService, and so each item is on Object.
Thus, I attempted to dynamically assign a property to the Object in
my app code, and then access that property within my programmatic
skin (which extends ProgrammaticSkin and implements IDataRenderer).
Does anyone know how to get information from within such a
programmatic skin?
The easy workaround here was to use three different series
and put data into the appropriate series, but this won't have the
desired visual effect with a ColumnChart, which I must also
implement.Found it. You get access back to the object with
PlotSeriesItem.item -- the item property. -
Need info for ABAP Certification
Hi All,
I am having 5+ exp in SAP ABAP/HR ABAP and i am plannig for SAP ABAP certification. I searched on google and found different sereies of books. Can anybody help me to know what are the avaliable ABAP certification and books? So i can choose the right certification with correct course material.
Thanks
PiyushHi,
SAP Press Books are very useful otherwise SAP Provide certification material if u enroll for some SAP Certified institue like Siemens, Genovate etc.. That one also gr8 help for SAP Certification examination.
Regds,
Rakesh -
Need info for lost back cover to my 9800
i lost my back cover on my 9800 and need to find a replacement. how and where do i find one.
you can buy at ebay.com
-
Need info for BO 4.1 software download
Hi,
I am new to this community. Where can I download SAP BO 4.1 trial software for windows 7. All I find the link for windows server version. Is there any way I can locate for windows version softwareHi Helen,
Are you trying to download SAP BusinessObjects BI 4.1?
If yes, then the server tools are only available for server operating systems (e.g. Windows Server 2008, 2012, etc.).
The client tools which connect to the server can be installed on Windows 7. Win7 is not a supported server OS for BI 4.1 server tools. In terms of a trial you may run into issues if installed on Win7 thereby not being able to experience an effective trial.
You can find more information here in the supported platforms guide:
SAP BusinessObjects BI - Supported Platforms
Hope this helps.
-Sid -
Need Info for Creating BI XMLA System in EP
Hi,
Can someone tell me, on creating BI XMLA System, whether should we create through System from PAR or System from Template.
If from Template, then in Connection Properties what value we should fill for Database Name.
If from PAR, then in Connection Properties what value we should fill for Datasource Name.
Regards
DeepHi Deep,
we created a BI XMLA system from template to a SAP BW 3.0B.
In general it works. Sometimes there are errors caused by connection timeout which we can not figure out why.
Did you see this link:
http://help.sap.com/saphelp_nw04s/helpdata/en/47/fa4f9d671642ada195d20cf7ef4c7c/frameset.htm
The portal test works is fine? Did you test a standard SAP Cube? I do not know why but in our case the SAP Cubes worked better with XMLA.
Try to access the cube via the transaction mdxtest and see if there is everything fine.
Regards
Lars
Maybe you are looking for
-
I have a MacBook Pro operating on OS X. My printer is a HP Photosmart D7560. In the past I have had no problems creating a cd image & printing it, but I have not tried to print since updating to Lion. Two problems are arising. 1st - I can not get an
-
I downloaded the newer 10.7.4 to update my 10.6.8 and it telling me i need the 10.7? What gives
-
Hyperlink Opportunity Name in a report
Hi, I have a report which I would like to display the Opportunity Name as a hyperlink. I have tried using the following HTML segment @[html]"<a href="/OnDemand/user/OpportunityDetail?OpptyDetailForm.Id=@H&OMRET0=%2fOnDemand%2fuser%2fOpportunityHomePa
-
Lion not saving settings, iTunes not working, iPhoto not repairing
having a ton of issues and not sure if it's upgrading to Lion, updating iTunes or something else causing the problem. When I'm logged in as the main user getting a ton of problems including; 1) no matter which box I check or uncheck or which windows
-
CSS applying in IE but not in FF
Hello All First of all thank you to the folks who gave me advice on this site with images etc being off a bit - I went from ugly stupid nested tables to all CSS site.. I now have another problem.. the site looks fine in IE - having the CSS applying t