Need Info for Creating BI XMLA System in EP

Hi,
Can someone tell me, on creating BI XMLA System, whether should we create through System from PAR or System from Template.
If from Template, then in Connection Properties what value we should fill for Database Name.
If from PAR, then in Connection Properties what value we should fill for Datasource Name.
Regards
Deep

Hi Deep,
we created a BI XMLA system from template to a SAP BW 3.0B.
In general it works. Sometimes there are errors caused by connection timeout which we can not figure out why.
Did you see this link:
http://help.sap.com/saphelp_nw04s/helpdata/en/47/fa4f9d671642ada195d20cf7ef4c7c/frameset.htm
The portal test works is fine? Did you test a standard SAP Cube? I do not know why but in our case the SAP Cubes worked better with XMLA.
Try to access the cube via the transaction mdxtest and see if there is everything fine.
Regards
Lars

Similar Messages

Need help for creat apple id in iphone 5s

need help for creat apple id in iphone 5s

See this support document for instructions. http://support.apple.com/kb/HT2731

Need help in creating webas abap system

hi
new to create jco and techinical system need help
experts i have few faqs on creating techinical system plz help me
i have 4.7ee r/3 and portal 2004s sp9
wer can i find these values plz give me navigation
SID == ?
MESG SEVER PORT ===?
to add application server
application host name ==?
application instance number ==?
client number ==?
logical client name ==?
it is asking to select a software component wat we have to select to finish
wen i gave some dummy values
i get an error
CIM_ERR_ALREADY_EXISTS: Instance already exists: SAP_BCApplicationServer.CreationClassName="SAP_BCApplicationServer",Name="C11.Number.00.HostName.rama"
is it necessary to have WAS in r/3 to connect to portal plz explain

i want to use jco
but for that we need to create a techinical system
i followed these steps for techinical system
1 Step
selected web as abap
2nd step
sid = PRD
installation number== INITIAL
database host name== super
3rd step
message server name = 3600+instance
i took system number from sap gui(21)
so i gave 3600+21=3621
central application sever
instance number ==21
next pressed button -->add new logon group
entered longon group == entered value
which i found in t-code -smlg
4th Step
Add application server
host == gave r/3 ip 198.168.0.2
instance==21
client number = 800
logical client = left it empty
5 th step
selected one componenet and finished
after this i created the jco
1st Step general data
name =test1
client=800
2nd step j2ee cluster
checked the box
use local j2ee engine
3rd step
selected dictionary meta data
4 th
selected the techinical system
5th
user name -->sapuser
pasww-->india
pressed finish
now i found the jco in green color
but i pinged it
i got mesg
ping failed

Need instructions for creating T61 XP backup media

Can you direct me to instructions for creating the backup media (DVD preferably) for the existing 4GB backup partition on my T61 running XP? It is intact, and I can boot into it, but I'd sleep a little better if I had the option of booting from external media. I'm aware of the advice to call and purchase this media, but I would prefer to just make it myself, if possible.
Thanks!
Moderator Note; post moved to start new thread, subject edited.

I don't recall the step by step, but there is a menu item in the lenovo section you can use to burn recovery media from within windows. If I'm not mistaken, it can only be used once, however if someone already burned a set you can still restore from the harddrive and after restored you will again be able to burn one copy of recovery media.
However, I'll give you my own personal opinion on this. When you install from this recovery media you'll have an outdated operating system. The T61 recovery disc was made in 2006 or 2007 and after you install it you'll need to install the latest service pack, then you'll probably want to replace all the drivers and all the lenovo apps that are also outdated. You're going to end up replacing nearly everything, plus you're going ot have several redundant copies of all this outdated stuff taking up space. My preferred method is to use a windows setup disc that has the latest drivers and critical updates integrated, then go online and download the latest drivers for your hardware and as much or as little of the lenovo products that you want on your system. You then save an enormous amount of harddrive space and have a computer without all the bloat and it all gets done in a fraction of the time. The last time I installed from a factory restore disc set it took hours, then several hours more to replace everything with updated versions.
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

Info for Creating a webservice

Hi Experts,
Could you please guid me how to create the Webservice and how to use that in XI.
Thanks in Advance,
Dushanth.

Hi Dushanth,
You create a Web service so that users can access the available functions, such as an RFC-enabled function module, function group, BAPI, or XI message, even those stored in a different system.
Two roles are provided for creating Web services:
●      Web Service Developer
The Web service developer defines the Web service at design time. He or she knows the application logic as well as the resulting conditions for the communication type (for example, stateless/stateful), and the required security level. He or she defines these properties at an abstract level. Specific details, such as the transport binding or security concept to be used, are defined only later during the Web service configuration.
●      Web Service Configurator
The Web service configurator defines the behavior of the Web service at runtime. He or she knows the system landscape and the technical requirements of the application server where the Web service is to be called. On the basis of the abstract definition of the Web service, the configurator can decide during configuration which specific attributes should be assigned to the features defined at design time.
Prerequisites
To create or consume Web services, you need the authorizations associated with the role SAP_BC_WEBSERVICE_ADMIN. You must add the authorization S_ICF_ADMIN (authorization for the Internet Communication Framework) to your profile. You use the authorization S_SERVICE for starting external services.
Procedure
Um einen ...
●      To create a Web service for a function module, function group, BAPI, or XI message interface with a predefined feature profile, use the Web Service Creation Wizard.
●      To specify the features of the Web service yourself, follow the procedure described in Creating a Virtual Interface.
You can also create Web services using the Web Service Creation Wizard, and then change the virtual interface and Web service definition in the Object Navigator (SE80), by choosing Enterprise Services ® Web Service Library.
for more Information click on the following link
http://help.sap.com/saphelp_nw04/helpdata/en/76/084e3ce0f9fe3fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/76/084e3ce0f9fe3fe10000000a114084/frameset.htm
Cheers,
Ashok Kumar.

Need Ideas for creating and using Custom Business Object

Hello Guys,
I am developing an application which uses a Request->Approve->Create approach for creating Purchase documents.
Now I am a little puzzled about how to make use of the Business Object BUS2014.
The application I am developing has its own unique 'Request Number' (say REQID) which will point to the Request for Creation of a purchase order.
Whenever a Request is created (from a Z-Tcode) a workflow needs to be initiated and it has to be sent to the approver.
The Purchase Document will be created once the approver approves.
Now my confusion here is, if I use BUS2014, the object will be instantiated only during the final step of the workflow. But I need an instance during the beginning of the Requestor ->Approver negotiations as I am playing with events. These events needs an Object_key.
How should I proceed here?
Should I create a new logical Business Object like ZPOREQ where I have the above mentioned REQID as the key?
And should I have an attribute of type BUS2014 inside the custom BO?
How will I make use of the methods like BUS2014.Create etc which I may need to create the purchase document?
Any small direction will be a huge help for me to get used to this wilderness.

Hi,
You should continue with the ABAP class idea. The business objects are kind of "obsolete" already, and if there is a need to create a new "object", ABAP classes are the way to go. Business objects are still useful, but I normally use them only when an existing standard business object fulfills the requirements (possibly with slight additions) which is almost never.
From my point of view you can use the existing class. Depending on the circumstances I normally have just one class that I use for both workflow and the possible other functionality that is required, but you have to understand that I have this goal in my mind already when starting the development process. As your class most probably has many useful features already (such as you have the header and item data as attributes etc. (if I understood correctly?), these are also useful in in workflow (class attributes will be available in WF container etc.).
If you are hesitant to use the same class directly in your workflow, you could also create a new class ZCL_REQUEST_FOR_WF (with the workflow interface), and then simply add your existing class ZCL_WF_REQUEST as an attribute to this new class. Then this new workflow class could include the pure workflow stuff, and your existing class the non-workflow stuff. But this most probably will not make much sense - just implement the if_workflow interface in your existing class (this is just one possibility that you might consider.)
Regards,
Karri

Need help for Booting K8NGM2 Based system

Please, excuse my lack of knowledge, but I need your help.
Trying to boot a desk-top with mobo K8NGM2-FID version 2.0 with BIOS 3.20
System posts and detects components as stated below.
After Post it gives me the following message:
nVidia Boot Agent 224.05 23
PXE-E61: Media test failure. check cable
PXE-MOF: Exiting nVidia Boot agent
Reboot and select proper Boot device.
Insert Boot media in select boot device and press a key.
I have access to BIOS and have kept all defaults but “Quick boot”. Have changed the booting device order where nVidia boot agent appears, but it doesn’t help.
Media I received with mobo do not apparently include that boot media, or at least doesn’t make any difference in notification, that is: a) CD-ROM Drivers & Utilities &
b) Floppy Disk nVidia C51+MCP51 SATA RAID Driver for Win 2K/XP
System has the least components trying to make easy boot:
CPU: AMD Athlon ™ 64 Proc. 3200+
AMI BIOS 2005 V 3.20 Date 02/07/06
DRAM clocking 400 MHz, Usage Memory: 960 MB
Secondary IDE Master: ATAPY CD-ROM - SONY CD-RW CRX230ED
Third IDE Master: Serial – ATA Primary Seagate 7200.9 Barracuda 160 GB
Floppy: 1.44 MB 3 ½
I’m reserving primary master for IDE HDDs.
Thank you in advance for any ehlp.

Quote from: dmcomputerguy on 26-December-06, 10:18:39
Bosskiller, you said: go into BIOS and Disable Onboard LAN ROM, and re-arrange correct boot priority device.
The Quote function doesn't work so I cut and pasted the above.
He said that he has not loaded an OS yet as I understand. Not sure you saw that post.
read the thread again, he was already know that he need to install OS,(Stu and you already noticed that and he understand, but he was not able to pass nvboot agent) i told him how to get rid of Nvidia boot agent and re-arrange boot device to proceed with OS installation.

Is Dreamweaver an appropriate tool for creating a Help system?

Hi,
I have the full Adobe Creative Suite and I'm looking to create a Help system. Is Dreamweaver an appropriate tool for this, or is there another tool that would be better? I don't have Robohelp.
Robyn

Hi Robyn
Robohelp and most of the other help systems would be like splitting a nut with a sledgehammer, for what you describe.
You are basically talking about a search system on specific topics, for which Dreamweaver is an adequate tool, it may be worth while incorporating one of the 'smaller' open source help system into your site, in order to achieve your goal.
Your comment on posting to the 'indesign' forum is understandable but not recommenced (there is a great difference between dtp (classic graphic design) and web design / development), especially if you intend to incorporate your current 'user guide' into a web site. Any help system both for a program that you install on your computer or supply as a web site 'help' system can be constructed as a searchable html page (many are html pages now), and you can even use the a major search engine to do this for you, (providing you know how, of course). It is even possible to search pdf's, flash and audio, and provide then as a downloadable / online version as well if you so require.
The one thing you did not say in your reply was how good your programming skills are, (if not very good, do you have someone who can do this for you), as this is what will limit your help / search system. But even here if you incorporate one of the search engines own search api into a basic web page they will index and search your site for you, both as a local search, and as a web search.
Hope this helps, in some way.
PZ

Is InDesign or Dreamweaver useful for creating a Help system

Hi,
I have the full Adobe Creative Suite and I'm looking to create a Help system. Is Dreamweaver an appropriate tool for this, or is there another tool that would be better? I don't have Robohelp. I realize that's probably a better tool. Or would anyone recommend using the XML that is available with InDesign?
Robyn

Hi Robyn
Robohelp and most of the other help systems would be like splitting a nut with a sledgehammer, for what you describe.
You are basically talking about a search system on specific topics, for which Dreamweaver is an adequate tool, it may be worth while incorporating one of the 'smaller' open source help system into your site, in order to achieve your goal.
Your comment on posting to the 'indesign' forum is understandable but not recommenced (there is a great difference between dtp (classic graphic design) and web design / development), especially if you intend to incorporate your current 'user guide' into a web site. Any help system both for a program that you install on your computer or supply as a web site 'help' system can be constructed as a searchable html page (many are html pages now), and you can even use the a major search engine to do this for you, (providing you know how, of course). It is even possible to search pdf's, flash and audio, and provide then as a downloadable / online version as well if you so require.
The one thing you did not say in your reply was how good your programming skills are, (if not very good, do you have someone who can do this for you), as this is what will limit your help / search system. But even here if you incorporate one of the search engines own search api into a basic web page they will index and search your site for you, both as a local search, and as a web search.
Hope this helps, in some way.
PZ

Need info on configuring Third Party Systems on Soln Mgr

Hi All,
I have installed Solution Manager 4.0 on Windows 2003 Server and Oracle 10.2.0.2 and need to integrate Third Party Systems like E3, HighJump and Marketmax on it.
What we are basically looking for is configuring the Service Desk functionality so that tickets are generated from these systems.
Can any one provide me with any kind of help as to how to go about doing this ? I am almost done with configuring the Basic Settings in the IMG to implement the Service Desk. I say almost because it does ask me to create a System Landscape and I donot want the SAP Systems to be monitored.
Thanks,
Kunal

Hi
Can u please send me the Steps for configuring the Basic settings in IMG to implement the service desk.(what r the step to be done)
Regards,
Neni

Need inputs for creating Jar file

Hi All,
I am doing the scenario as file to mail. so here i am using java mappings for sending the file in mail attachment.
as i can see in my system there are already one imported archive exists with name called "java_mappings".
in that i can find 10 to 12 mapings which are used for different interface.
i have tried to export the imported archive to my local system and created the project with same in NWDS.
but here i can not find jar file.
can anyone suggest how can i get jar file for already exist the imported archive.
second option is if i want to create new mappings then how can i get the Jar file.
thanks,
Bhaskar

Hi Bhaskar,
Jar file is an archive which consists of all class files needed by Java mapping. If you have a folder named Java_mapping and you guess that it is being used in different interfaces, then it should have the class files in it... may be the source code is missing...
I will suggest you to export it into your local machine and extract using winzip.. then you might see some file with .class extesnion. Try a tool like frontendplus which will make java code from java class file to get there code..
Now if you are trying to make one for your requirement i would suggest to read the stefan grube blog..
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=%28J2EE3414700%29ID1981012450DB01072979760660502867End?blog=/pub/wlg/4774
Also note that the java mapping is just a jar file which has:
1. the com.sap.xpi.ib.mapping.lib.jar (PI7.1) or aii_map_api.jar (PI7.0 or XI3.0) file
2. You java code class file.
Regards
Suraj

Need info for COPA (Cost based profitability analysis)- Archiving objects

Hi All,
SAP have introduced new 2 Archiving objects COPAA_xxxx, and COPAB_xxxx instead of the old archiving object COPA1_xxxx.
Where xxxx = operating concern.
Can any one please give the document path how to archive the COPA data.
Means exactly i want the variant parameters for the 2 new archiving objects.
Please waiting for your reply...
Thanks,
Nagendra

Hi Chandra sekhar,
I need to Archive the data in R/3 system & ECC6.0 not in BW system.
I want the steps how to Archive the 2 objects COPAA_xxxx, COPAB_xxxx in ECC6.0 System.
Please if have any info please help me...
Thanks,
Nagendra

Need info .for connec.with golive 6.0 hosted on Apache serv.

We have built several sites under Golive 6.0 hosted on
Apache/2.2.3 (Unix) mod_ssl/2.2.3 OpenSSL/0.9.8b DAV/2 PHP/5.2.11 Server
Two of them work perfectly well with a connection to Mysql ver 4.1. hosted on a other server.
The 3rd one cannot connect to the database, the reason seems to be a virtual repertory on the server.(Amen server)
The site is redirected on a IP adresse . The XML files cannot be read. Would someone have an answer to this problemes.
Many thanks for your help.
Keith

Thank you Marian.
We are now on golive 6.01, and the first mistake wich occurs in the Golive scripts with are loaded on the Server for PHP language is :
<ERROR Number="2" Description="Error: "readdir(): supplied argument is not a valid Directory resource" on line 35 of /htdocs/public/www/config/info/ui6.php." />
We have set the friends to 0.0.0.0 0.0.0.0 for the moment
I understand now why the Golive must be > 6.0
Woull you like me to send to you the ini.php file set up on are server by are provider. We have total acess to this file
Here is the content of ui6.php
Line 35 is underlined
<?php
$GLparam = array(
* Arrange to send data in the UTF-8 charset.
'internal_encoding'=>'UTF-8',
'output_encoding'=>'UTF-8',
'content_type'=>'text/xml',
require_once("../include/utils.runtime6.php");
// Support for Customizable UI for DynamicLink
// ADOBE SYSTEMS INCORPORATED
// Copyright 2000-2002 Adobe Systems Incorporated. All Rights Reserved.
// NOTICE: Notwithstanding the terms of the Adobe GoLive End User
// License Agreement, Adobe permits you to reproduce and distribute this
// file only as an integrated part of a web site created with Adobe
// GoLive software and only for the purpose of enabling your client to
// display their web site. All other terms of the Adobe license
// agreement remain in effect.
header("Content-type: text/xml; charset=UTF-8");
$thisFilename = GetCurrentFile();
$packages = array();
$handle = opendir(dirname($thisFilename));
while ($file = readdir($handle)) {
if (ereg('(.*)\.ui([0-9]+)\.xml$', $file, $regs)) {
$thisPackageName = $regs[1];
$thisPackageVersion = $regs[2];
if ($thisPackageVersion > 100) {
   $thisPackageVersion /= 100;
} else if ($thisPackageVersion > 10) {
   $thisPackageVersion /= 10;
if ($thisPackageVersion > 6.0) {
   continue;
if (isset($packages[$thisPackageName])) {
   $package = $packages[$thisPackageName];
   if ($thisPackageVersion > $package["version"]) {
    $package["version"] = $thisPackageVersion;
    $package["fullname"] = basename($file);
    $package["path"] = $file;
    $packages[$thisPackageName] = $package;
} else {
   $package = array();
   $package["name"] = $thisPackageName;
   $package["version"] = $thisPackageVersion;
   $package["fullname"] = basename($file);
   $package["path"] = $file;
   $packages[$thisPackageName] = $package;
closedir($handle);
echo "<ui6>\r\n\r\n";
while (list(, $package) = each($packages)) {
echo "\r\n\r\n\r\n\r\n";
readfile($package["path"]);
echo "</ui6>\r\n";
?>
Keith

Is there an adobe -non coding needed- program for creating iPhone applications?

hi there,
i've been asking around for a program that i can create iphone applications with, and so far landed on xCode from apple,
i haven't tried it yet, but as far as i heard it needs coding, and as a designer i'm not fimiliar with coding languages...
need a simple, user friendly program to deal with, similar to adobe muse when it comes to designing websites.
i would much more prefer deal with an adobe program to create applications than an apple's...
is there one?

i know one, a coder/programmer, but thought maybe there is program that will allow me to do the whole thing by myself,
specially when i found out about adobe muse, anyway, thanks a lot for the info.
wafa'a j.

Need API for Creating Profile at site level

Hi ,
I need to create Profile at site level by using APi.
I have a requirement to create dynamically Profile for storing last run date of my program.
so I need a API which can create Profile by Pl/Sql code.
Thanks in Advance,
Ajit
[email protected]

The list of 11i APIs can be found under [Oracle Integration Repository|http://irep.oracle.com/].
In R12, the Oracle Integration Repository is shipped as part of the E-Business Suite (Oracle Integration Repository Responsibilty).

Need Info for Creating BI XMLA System in EP

Similar Messages

Maybe you are looking for