Need info on how to load aspx files

I created a "Contact Us" aspx page in Visual Web Developer 2008. It is included in my defined site and root folder in Dreamweaver. When I try to call the page, it opens a dialog box which asks if I want to Save or Open (or Cancel) the aspx page. If I click "Open", the aspx file opens in Design mode in Dreamweaver, not as a web page. My site uses a downloaded free template. How do I get this page to load as a webpage in the editable region of the template instead of opening in Dreamweaver in Design mode? The "Contact Us" page is used in conjunction with a database, and I can't even test the database functionality because I cannot get the aspx page to load properly. What am I doing wrong?
Thanks in advance for any help or suggestions.
Felecia

What version of Dreamweaver are you using? The reason I ask is that Dreamweaver in the past only supported .NET v1, and now doesn't support .NET at all. In fact all legacy support for .NET in any form has been removed entirely from the latest version.
So the answer to your question is most likely, regardless of the Dreamweaver CSwhatever is, you can't see .NET code in the WYSWYG environment at all, and Dreamweaver isn't going to know what to do with this file type.
Not the answer you wanted to hear, I know, but for years Microsoft would not release information specks or alpha/beta code soon enough for support for the coming version of .Net to be worked into the next release of Dreamweaver , the end result was that Dreamweaver always lagged seriously behind the curve for .NET. Adobe finally said "if they won't play nice and insist on always keeping us at a huge competitive disadvantage, then heck with it" I can't fault them for this move. It's a real bummer for .Dreamweaver users that also have to occasionally work with .NET, but, the fingers are pointing at Microsoft on this one.
Lawrence Cramer *Adobe Community Professional*
http://www.Cartweaver.com
Complete Shopping Cart Application for
Dreamweaver, available in PHP and CF
Stay updated - http://blog.cartweaver.com

Similar Messages

How to load flat file in existing Architecture.

Hi everyone!
There is an existing architecture that I have to upload data into. There is a cube on top, followed below by an ODS and its update rules to the cube, followed below by an Infosource and its corresponding update rule to the ODS above it, followed below by a datasource (it says PC FILES(PC_FILE)) and its accompanying transfer rules to the infosource....
There is nothing in the ODS... No data. The Datasource says emmulated 3.x Datasource... (What does this mean?)
What I want to do is upload data via a flat file... Good BI Masters, how do I do this? How do I create a "dummy file" for upload? What are the specific sequence of steps that I need to do to load this flat file data?
Thank thank you so much!
Philips

emulated DS:
http://help.sap.com/saphelp_nw04s/helpdata/en/8c/131e3b9f10b904e10000000a114084/frameset.htm
I'm not sure what you are asking - is it how to load a file all the way to cube in 7.0?
From the architecture desc you have given, you havent migrated ur dataflow to new 7.0 dataflow, as you still have the update rules and transfer rules. So though ur system is 7.0, ur backend is still on 3.x, so the way you load a file is the same when your system was 3.x(before upgrade)
Or - are you asking the steps to load the file to a cube - no matter which environment you are in (3.x or 7.0)? if so, let us know .. and do a search on the forum for steps to load flatfile

How to load .wav files in LabView and vi for TDM,FDM,QPSK,ASK

Hello
I am doing my project in LabVIEW that is VIRTUAL TELEPHONE COMMUNICATION SYSTEM
AND APPLICATION OF LABVIEW IN ADVANCE COMMUNICATION TECHNIQUES.I have implemented every block till date but for the rest part of my project that is advance communication techniques i need vi for QPSK,TDM,FDM,ASK and I just wanted to know how to load .wav file in LabVIEW
Please assist me for this
Attachments:
Telephone communication process.docx ‏25 KB

Hi Dilpreet,
reading wav files is easy using the functions from the sounds palette...
For your other tasks you could use a seperate toolkit or do some programming on your own!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How to load flat files to BI

Hi All,
I am new to SAP BI. PLease tell me how to load excel files to BI.

hi,
For BI 7.0 basic step to laod data from flat (excel files) files for this follow the beloww step-by step directions ....
Uploading of master data
Log on to your SAP
Transaction code RSA1u2014LEAD YOU TO MODELLING
1. Creation of Info Objects
u2022 In left panel select info object
u2022 Create info area
u2022 Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
u2022 Create new characteristics and key figures under respective catalogs according to the project requirement
u2022 Create required info objects and Activate.
2. Creation of Data Source
u2022 In the left panel select data sources
u2022 Create application component(AC)
u2022 Right click AC and create datasource
u2022 Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
u2022 In general tab give short, medium, and long description.
u2022 In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
u2022 In proposal tab load example data and verify it.
u2022 In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
u2022 Activate data source and read preview data under preview tab.
u2022 Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
u2022 In left panel select info provider
u2022 Select created info area and right click to select Insert Characteristics as info provider
u2022 Select required info object ( Ex : Employee ID)
u2022 Under that info object select attributes
u2022 Right click on attributes and select create transformation.
u2022 In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
u2022 Activate created transformation
u2022 Create Data transfer process (DTP) by right clicking the master data attributes
u2022 In extraction tab specify extraction mode ( full)
u2022 In update tab specify error handling ( request green)
u2022 Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. Alternatively monitor icon can be used.
BW 7.0
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1u2014LEAD YOU TO MODELLING
5. Creation of Info Objects
u2022 In left panel select info object
u2022 Create info area
u2022 Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
u2022 Create new characteristics and key figures under respective catalogs according to the project requirement
u2022 Create required info objects and Activate.
6. Creation of Data Source
u2022 In the left panel select data sources
u2022 Create application component(AC)
u2022 Right click AC and create datasource
u2022 Specify data source name, source system, and data type ( Transaction data )
u2022 In general tab give short, medium, and long description.
u2022 In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
u2022 In proposal tab load example data and verify it.
u2022 In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
u2022 Activate data source and read preview data under preview tab.
u2022 Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
7. Creation of data targets
u2022 In left panel select info provider
u2022 Select created info area and right click to create ODS( Data store object ) or Cube.
u2022 Specify name fro the ODS or cube and click create
u2022 From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
u2022 Click Activate.
u2022 Right click on ODS or Cube and select create transformation.
u2022 In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
u2022 Activate created transformation
u2022 Create Data transfer process (DTP) by right clicking the master data attributes
u2022 In extraction tab specify extraction mode ( full)
u2022 In update tab specify error handling ( request green)
u2022 Activate DTP and in execute tab click execute button to load data in data targets.
8. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used
Regards,
ANI

Uregnt - How to Load Flat File into BW-BPS using Web Browser

Hello,
We have followed the 'How to Load Flat File into BW-BPS using Web Browser' guide to build BSP web front-end to upload flat file. Everything works great but we have a requirement to populate the Planning Area Variables based on BSP drop down list with values. Does anyone know how to do this? We have the BSP coded with drop down list all we need to do now is populate variables. We can populate the variables through the planning level (hardcoded) but we need to populate them through the web interface.
Thanks,
Gary

Hello Gary,
We have acheived the desired result by not too a clean method but it works for us.
What we have done is, we have the link to load file in a page where the variables can be input. The user would then have the option to choose the link to load a file for the layout in that page.
By entering the variable values in the page, we are able to read the variables for the file input directly in the load program.
Maybe this approach might help.
Sunil

How to open aspx. files in OS 10.8?

is this the right place to ask how to open aspx. files in OS 10.8.2?

Unfortunately aspx is a generic extender - it is a report generated by a server running Windows .net - it isn't an extender that actually tells what kind of file it is or what kind of data it holds. That's something you either have to know before hand so you can force the proper program to open it (or change the aspx extender to its real extender) or you have to find out what the file is.
At work our system's report generator gives everything an aspx extender. When I generate a report I decide whether it should be a PDF, Excel file, etc. After downloading the file I change its extender appropriately.

How to load flat file in BPS through Web-debugging

Hi,
We are working on flat file upload in BPS thru guide 'How to load flat file in BPS through Web'. Can some one guide on how to debug the function modules used while uploading the data.
We have set up the break point in the function modules and also in the BSP page. But when trying to debug while uploading, it is not going to the break point which was set.
Could you assist in setting up the break point.
Regards,
Sreenath
Message was edited by:
sreenath reddy

Hi,
I have put an external break-point.
I have hard coded it in the coding of the function module itself.
The code is perfectly working. But, when I want to check for the values of the variables in the F.M during runtime, the break-point is not triggering. Any ideas??
Regards,

How to load jar file in oracle 9i???

Hi Friends,
Can you help me, how to load jar file oracle 9i? I have to tried to load in 10g using loadjava command but it's not working in oracle 9i because the loadjava batch file itself is not there in oralce 9i.
Is there any other way then pls let me know.
- Hiren Modi

Hi,
I have oracle version : Release 2 (9.2.0.1.0) for Windows. I have tried to execute the loadjava command from SQL prompt but its giving as below.
H:\>loadjava
The system cannot find the path specified.
Do you know why its giving error like this. I have checked in dir : C:\oracle\ora92\bin but loadjava executable file is not there in it.
- Hiren Modi

*** Question How to load a file into BI-Integrated Planning and use WAD 7.0

Hi, I created an manual DTP upload to my planning infocube and it works fine. The transformation rules convert 0CALMONTH into the relevant Calendar and Fiscal characteristics. So all of my Time Characteristics are fine, both Calendar and Fiscal.
However, When using the "How to load a file into BI-Integrated Planning and use WAD 7.0" solution, only the Calendar Characteristics are populated and not the Fiscal. The upload application somehow knows to populate the 0CALMONTH2, 0CALQUART1, 0CALQUARTER, and 0CALYEAR.
How can I get the upload to populate my Fiscal Period Characteristics?
Would it be best to modify the "Upload Application, or can I write a planning function to update the fiscal characteristics, or some other way?
Thanks!

My planning data is being uploaded via the SDN Planning File Upload Solution. What I did was end up modifiying the upload class ZCL_RSPLF_FILE_UPLOAD Method EXECUTE.
I added the following code if anyone is interested.
*{ INSERT BWDK902323 1
THIS SECTION OF CODE POPULATES THE FISCAL PERIOD CHARACTERISTICS
USING THE FISCAL YEAR VARIANT 'NK' AND THE CALENDAR MONTH/YEAR
FIELD-SYMBOLS <0FISCVARNT> TYPE /BI0/OIFISCVARNT. " Fiscal Year Variant
FIELD-SYMBOLS <0FISCYEAR> TYPE /BI0/OIFISCYEAR. " Fiscal Year
FIELD-SYMBOLS <0FISCPER> TYPE /BI0/OIFISCPER. " Fiscal Year/Period
FIELD-SYMBOLS <0FISCPER3> TYPE /BI0/OIFISCPER3. " Posting Period
FIELD-SYMBOLS <0CALMONTH> TYPE /BI0/OICALMONTH. " Calendar Month/Year
ASSIGN COMPONENT '0CALMONTH' OF STRUCTURE <L_S_DATA> TO <0CALMONTH>.
ASSIGN COMPONENT '0FISCPER' OF STRUCTURE <L_S_DATA> TO <0FISCPER>.
ASSIGN COMPONENT '0FISCVARNT' OF STRUCTURE <L_S_DATA> TO <0FISCVARNT>.
ASSIGN COMPONENT '0FISCPER3' OF STRUCTURE <L_S_DATA> TO <0FISCPER3>.
ASSIGN COMPONENT '0FISCYEAR' OF STRUCTURE <L_S_DATA> TO <0FISCYEAR>.
<0FISCVARNT> = 'NK'.
CALL FUNCTION 'FISCPER_FROM_CALMONTH_CALC'
EXPORTING
IV_CALMONTH = <0CALMONTH>
IV_PERIV = <0FISCVARNT>
IMPORTING
EV_FISCPER3 = <0FISCPER3>
EV_FISCPER = <0FISCPER>
EV_FISCYEAR = <0FISCYEAR>.
*} INSERT

How to load flat file using IP

Hi Experts,
I know that we can use planning function exit in BW-BPS to load the data from flat file(and there is a how to document).
But in IP what is process to load the flat file.becoz when i see into my planning function,type exit is not available.
Any idea.

/people/marc.bernard/blog/2007/11/25/how-to-load-a-file-into-sap-netweaver-bi-integrated-planning-part-1
/people/marc.bernard/blog/2007/11/25/how-to-load-a-file-into-sap-netweaver-bi-integrated-planning-part-2
hope this helps.

How to load text file data to Oracle Database table?

By using Oracle Forms, how to load text file data to Oracle Database table?

Metalink note 33247.1 explains how to use text_io as suggested by Robin to read the file into a Multi-Row block. However, that article was written for forms 4.5 and uses CREATE_RECORD in a loop. There was another article, 91513.1 describing the more elegant method of 'querying' the file into the block by transactional triggers. Unfortunately this more recent article has disappeared without trace and Oracle deny its existence. I know it existed as I have a printed copy in front of me, and very useful it is too.

How to load text files in GUI

plz tell me .. how to load and compare two text files using file popup's . example file i have attached..
Attachments:
testW_FF.txt ‏2 KB

I don't understand whether your question is on how to load text files or how to show them on a panel or how to compare them... or all aspects together!
The first operation (loading the file) can be accomplished with functions included in the Formatting and I/O Library like OpenFile, ReadFile and so on; with a file like yours even FileToArray could be an option.
How to show the data on screen is heavily dependent on what you intend to do with them: data can be shown in textboxes, listboxes, tables or graphs so... what do you want to do?
The same applies with comparison: without additional details is difficult to give you the proper hint.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

How to load flat file into BW BPS

hi,
how to load flat file into BW BPS ?

Have a read through this;
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20load%20a%20flat%20file%20into%20bw-bps%20using%20a%20web%20browser.pdf

How to load CAD files like .prt, . stp in JAVA

How to load CAD files like .prt, . stp files which can be generated by UG and Pro/E etc in JAVA. I am appreciated that you will give any comments.

Hi,
as far as I know there is no Java 3D loader for CAD files available. You have to export your files into a format like "3ds ", "obj ", or "wrl". See thread 'JAVA 3D max files and VrmlLoader' on java.net: [http://forums.java.net/jive/thread.jspa?messageID=231564&#231564|http://forums.java.net/jive/thread.jspa?messageID=231564&#231564]
August

How to load configuration files with to TestStand

Hello,
I need an expert advise on setting up Teststand environment. I am developing a generic tester that will eventually support multiple product lines. The PXI equipment is common but the Pin assignment will change from product to another. So, I was thinking to have a configuration file (xml, excel, .csv...etc) that defines each product line. The configuration file will contain all the pin routing, like which pin is connected to which NI Card channel and fault insertion unit. My thought was to load this configuration file to the Teststand environment before starting a series of tests. I had in mind using XML files and use a labview parser to extract the data and write it to Teststand variables. My question is:
Is this the best practice for this approach ? Is there a better method ? Can I load data into Teststand first and hold the data in Teststand while testing a bunch of UUTs. I do not want load this file at the beginning of every Test, just once when opening Teststand.
I appreciate any advise on this.
Thanks,
Ayman

I'm using .ini file with configuration information and a startup sequence what read this file, configure the system and then run selected tests. Selected tests list is in the .ini file as well. Configuration info is passed to subsequences as a parameter or "propagate local".
I disagree with the idea of creating a separate sequence for each product, this solution is not scalable.
Message Edited by skof on 12-24-2009 09:37 PM
Sergey Kolbunov
CLA, CTD

Need info on how to load aspx files

Similar Messages

Maybe you are looking for