NEED info on How to Set Router to access just one website???

Ok here we go again, Finally found out it's my Linksys not letting me onto one website..I had a 310N and thought that was the problem so went out and bought a 610N ..same darn thing just won't let me access one website I need to sell my goods for income. I remove linksys from my modem and plug it directly into one of my computers and I got the website..Yes it's a Linksys problem !!!
I need some info on how to set up a access point in my router's setting to let me log on to this website www.denofangels or http://74.86.166.210/
Is it time for me to call the support team??????????????
I'm running XP on my computers, have 3 of the 4 computers using wirelessN adapters and on the main computer is the WRT 610
Help Please ....linksysDoll
Gone Nutz trying to figure out Linksys again!!

MY Internet provider is Time Warner / Roadrunner cable..Does this help you to solve my problem. Nothing wrong with the modem..just my wrt 610N settings, I'm guessing it carried over from my wrt 310N..this was working fine until a couple of months ago and then nothing for this one website.
I'm running XP
Thank you in advance for any help or info
Gone Nutz trying to figure out Linksys again!!

Similar Messages

  • Need info on how to get the little pictures like Adobe website has next to the title of the page??

    I know how to enter title text but i need to know how to get an image next to the title of the page please help??

    http://alt-web.com/favicons.shtml
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb

  • Need info on how to set GR-IV indicator

    Hi,
    We are on SRM 3.0, EBP 4.0 SP11.
    We have a condition for which we need to check the GR-IV indicator for all PO' line items going to R/3 from SRM.
    I tried using the BADI BBP_CREATE_PO_BACK, method FILL_PO_INTERFACE.
    In the interface, I am not able to find GR-IV indicator. I can find the GR and GR-Non val and IR indicators, but not the GR-IV flag.
    Can someone help me as to how I can achieve this?
    Thanks,
    Srivatsan

    Which SRM and R/3 version are you using ? Which Scenario in SRM ?
    <u>I think ir_ind => GR-IV flag in the BADI</u>
    <b>Please implement the code in BADI -> BBP_CREATE_PO_BACK to get the fields mapped properly before the BAPI gets called in R/3 system.
    Make an Implementation of bbp_create_po_back BADI.
    Inside the Implementation of the BADI , bbp_create_req_back, you can do code
    according to your requirements.</b>
    <u>Sample Code</u>
    METHOD if_ex_bbp_create_po_back~fill_po_interface.
      DATA: ls_po_items          TYPE TABLE OF BAPIEKANC,
                 ls_po_items_acc_data TYPE TABLE OF  BAPIEKKN.
      CLEAR ls_req_items.
      LOOP AT req_items INTO ls_req_items.
    *--- Reset the IR Indicator for Items with Zero net price
        ls_po_items_acc_data-po_item = ls_req_items-po_item.
        ls_po_items_acc_data-ir_ind  = space.
        ls_po_items_acc_data-gr_ind  = c_x.
        ls_po_items_acc_data-gr_non_val = c_x.
    *--- Reset the IR Indicator for Zero Priced Item
        APPEND ls_req_items TO req_items_acc_data.
      ENDLOOP.
    ENDMETHOD.
    I found some links which might help you in finding the details.
    <b>http://help.sap.com/saphelp_srm50/helpdata/en/d6/e9343e8c7f6329e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/40/654d216f12754e9decdaf4d360bc1c/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/d3/3891414ef4a209e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/d1/f71e4a0757714d9b1a0d4bbaf1e440/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/0a/baf73a93ad9179e10000000a114084/frameset.htm</b>
    Please refer to following OSS notes as well
    <b>Note 508632 - Extended - Acct assgnment change from 'Multiple' to 'Single'
    Note 480540 - Changing purchase orders in enhanced classic scenario
    Note 508788 - Incorrect account assignment in purchase order back end</b>
    Hope this will help.
    Please reward suitable points, incase it suits your requirements.
    Regards
    - Atul

  • I need info on how to use ipad 1, the first one

    Is there a tutorial or user's guide for the first IPAD, and where do I find it? Thank you.

    You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
    Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
    Apple - iPad - Guided Tours
    http://www.apple.com/ipad/videos/
    Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
    How to - Articles & User Guides & Tutorials
    http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
    iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    You can download this guide to your iPad.
    iPad User Guide for iOS 5
    http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
     Cheers, Tom

  • TS2755 Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help of how to set up messages on each

    Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks

    search google for "iphone remove picture from contact"

  • I need to know how to set up my itunes card i bought at the store on my phone please

    I need to know how to set up my itunes card that I bought from the store to my account on my phone

    Click here and follow the instructions.
    (118196)

  • Is there any way to set my iPad to access only one website?

    I am trying to set up a set of iPads for use in an online examination and would like to be able to limit wi fi access to just one website.  Is this possible?  If so how would I do it?
    Thanks.

    You might look into parental control apps. One I see a lot is McGruff. Turn safari off in restrictions, see if the mcgruff browser can be locked to one site only and, since safari is off, the only browser they should be able to use is the mcgruff one.
    I've never used it but you can explore it and other parental control ones and see if they will do what you want.
    You'll also want to lock out installing and downloading apps and possibly other things in the restrictions.

  • Is there a limit to how many pages i can have for one website using muse/business catalyst?

    is there a limit to how many pages i can have for one website using muse/business catalyst?

    Thank you. I've been searching everywhere and I couldn't find anything the mentioned it. I appreciate the feedback!

  • I have to Apple ids in email format--how can I change this to just one and merge all of my existing purchases and apps under one ID?

    I have two apple id's in email format--how can i change this to just one and merge all of my apps and tunes under the one retained ID?

    Sorry Duane..
    Apple does not support the merging of accounts >   Frequently Asked Questions About Apple ID
    messaged edited by cs

  • Now that I am on iCloud, I haveTWO of each of my contacts.  How can I get back to just ONE of each?

    Now that I am on iCloud I haveTWO of each of my contacts.  How can I get back to just ONE of each contact?

    auntiqu wrote:
    Now that I am on iCloud I haveTWO of each of my contacts.  How can I get back to just ONE of each contact?
    Remove the contacts from 'On My Mac' you don't have duplicates, you are looking at 2 accounts at once.

  • NI9203 - Need to know how to set up the FPGA code for multiple NI9203 modules and how to calibrate the data

    Hi. I'm using the NI9203 module to detect pressure, temerature and flow rate of water in a cooling system. I have 17 different inputs coming in therefore i'm using 3 NI9203 modules. I've used the example provided with labview as a base for designing my code. The example can be found here : Program Files\National Instruments\LabVIEW 8.0\examples\CompactRIO\Module Specific\NI 9203.
    I've had no problems when testing this code out for a single NI9203 module but when i add code for 3 modules the code will not compile as my resources are over mapped. Is there a simpler way to program the FPGA code.
    That said how do you go about calibrating the data that's received from the module. Preferably i'd like to write a vi to do the calibrating. Just need help on how to go about writing this vi

    Hi havok,
    Firstly, I would use constants to configure the modules, it'll save some resources on the FPGA.  I'm not typically changing the settings on the fly, so using constants whenever possible helps.  I would also take a look at the following KnowledgeBase article on other changes you can make to the FPGA VI to compile the code:
    http://digital.ni.com/public.nsf/allkb/311C18E2D635FA338625714700664816?OpenDocument
    The best changes you can make are to use fewer arrays and front panel elements.  This can be done by using a DMA FIFO or constants on the block diagram. 
    Now actually calibrating the data will require you to do it on the host side.  There is an example VI called Binary to Nominal that changes the raw data to something more useful for datalogging, display, etc.  It can be found in some of the example VIs, or in the following link:
    http://digital.ni.com/public.nsf/allkb/E86D8D460C4C092F8625752F00050A61?OpenDocument 

  • Need info on how PTG connects to OID

    Hello all,
    Can anyone tell me how PTG can connect to OID and how to architect the solution? In this situation does a wireless device connect to the PTG server first and with a hook redirect the login request to OID? How do we bypass the PTG security and utilize the OID security?
    Thank you

    MY Internet provider is Time Warner / Roadrunner cable..Does this help you to solve my problem. Nothing wrong with the modem..just my wrt 610N settings, I'm guessing it carried over from my wrt 310N..this was working fine until a couple of months ago and then nothing for this one website.
    I'm running XP
    Thank you in advance for any help or info
    Gone Nutz trying to figure out Linksys again!!

  • Hi! need info on how to undo a remote block of my iPad2.

    ?need information on how undo remote blocking of my iPad2. Itt was stolen and I want to keep tracking it.

    There should be a warning about no longer being able to track and item after a lock is sent.  The police asked me to undo it, I was totally disheartened to learn there was no way to undo the remote lock.  This should be addressed by Apple.  I would even pay Apple to undo mine it they could. 

  • Help!! Need info on how problems occur!

    We have sent my families iMac to an authorized Apple SPECIALIST and there were pixels that were broken. So they took our computer and after 4 days, they said that they fixed the screen, but they are "having a hard time recovering the accounts." They asked if we have backed-up (no) and we said no. They said that there was a problem wile doing a "repair and install on the OS". I need to know how problems occur wile reinstalling an OS. Is it the disk itself? Or in the OS Program because we might take this to their managers and we need to have the information to back our story up. Thank you!

    JacksonHern wrote:
    We have sent my families iMac to an authorized Apple SPECIALIST and there were pixels that were broken. So they took our computer and after 4 days, they said that they fixed the screen, but they are "having a hard time recovering the accounts." They asked if we have backed-up (no) and we said no. They said that there was a problem wile doing a "repair and install on the OS". I need to know how problems occur wile reinstalling an OS. Is it the disk itself? Or in the OS Program because we might take this to their managers and we need to have the information to back our story up. Thank you!
    As Allan says, you should backup before sending a Mac in for repair. But in reality, you should do Regular backups at all times. All hard drives fail, sooner or later, and other awful things happen. After you get this sorted out, investigate Time Machine or other backup apps.
    As to exactly what happened and why, it's hard to tell. I wouldn't expect a problem with a screen to require anything be touched on your internal HD, much less a new install of OSX, but you never know what's related to what.
    It sounds like they did a reinstall of OSX. In that case, your data may have been overwritten and is gone. But if you want to try to recover it, +*stop using the drive immediately.+* The more you use it, the more likely that is.
    You (or the supposed specialist) will need +data recovery+ software (or a service). It's possible that some of it may be recoverable. It's not cheap, and there are almost no guarantees, and I understand you'll need an external HD to receive the recovered files (hint: you can use it for backups later on, if it's large enough).
    +Data Rescue+ is the one we see mentioned here the most, but there are others. Just be sure whatever you get is compatible with Snow Leopard. Apparently some of these apps have a free version that you can download; it will tell you whether anything can be recovered, and perhaps recover one file. Then if you want the full version, you need to spend some $$.
    Search Google, VersionTracker.com, or MacUpdate.com for +Data Recovery.+
    Good luck!

  • How to set up email access on N95 8GB?

    Hi
    I have an N95 8GB.
    I have recently added a data bolt on for accessing work email from my phone and would like to receive a text/message when I receive a new email.
    Problem is I can't find any information on how to set this up.
    This link looked perfect:
    http://www.knowyourmobile.com/nokia/nokian95/nokia​n95internet/2533/setting_up_email_on_the_nokia_n95​...
    but  following it through on my phone doesn't come up with the same options etc.
    So far I have gone to 'messaging', selected 'change me', then - Options - Email Settings - Connection Settings - Incoming e-mail.
    Here I am stuck.
    Is my username my email address?
    Is my password my email account password?
    What is my incoming mail server?
    What is my access point in use?
    What setting should security ports be on?
    The settings also say that I cannot have email notifications and email retrieval together. What does this mean?
    I would really appreciate it if anyone out there can help.
    Thank you

    Hi, I'm a newbie at this, so pls be patient with my terminology...  I want to install 2 or 3 of these cameras in my mother's home, and I will have AT&T DSL service (one dynamic IP address) there with only a modem/wireless router.  I want to access the cameras from my laptop or from my Blackberry Tour when I am traveling.  Also want to allow access for my other relatives.  I do not have another home computer to serve as a WHS, and my laptop is obviously not connected to the internet all of the time.  Can I use the DDNS setup with DynDNS to provide access?  The instructions that I read seemed to imply that I needed a WHS in order to forward ports, etc.  Thanks in advance for your help.. Garry

Maybe you are looking for

  • Print does not appear in IOS 5 iPad

    HI, I am working on an app for iPad. I have implemented Print functionality in it to print PDF and PPT files. When I tested my app on ios 4 iPad it was working fine. Then I upgraded my iPad to ios 5. Now when I test my app, the print controller never

  • How to display bold text in JTextPane and how to get them?

    I need show some fonted text like BOLD, UNDER LINE, can some body tell how to do it? for example, how to show the following sentences? "This is <b><u><i>This is a test of the formatting option</b></i></u> end of" in JTextPane?

  • Advance payments check

    Hi All, The status of an Expense report is currently "Reimbursed,Advances not cleared". How can we check whether Advances are actually maintained or not? Kindly suggest. Sincerely, Manasa

  • Create/View New Message

    Forgive the newby question... In the process of writing a message (Mavericks e-mail) is there a way to keep the pending message on top? If before sending the message I go to another app, then return to email, only "show all open windows" key will bri

  • Lets convince Apple to change premium iTunes Radio rules for iTunes Match subscribers!

    Is it a bug that iTunes Radio does not recognize that your iDevice is a premium iTunes Radio user unless you have iTunes Match turned on? As far as I can tell Apple has this as a feature so that you are considered a free user for iTunes Radio on your