Need info on Integrated planning....

Hi BI-experts
We have upgraded from BW3.5 to 7.o , Now we are doing post upgrade support.
Now my role is to give a demo(proof of concept) to client about Integrated Planning(IP), Could anyone guide me howlong it takes to implement Integrated Planning and what are the list of activities we may need to do and some documents to prepare my demo on Integrated planning.
Thanks in advance..
Kiran

Hi,
Here it is
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00915d56-1e31-2a10-6785-e8b5c4114de3
/people/karen.comer/blog/2005/12/28/what-you-should-know-about-planning-with-sap-netweaver-bi
http://help.sap.com/saphelp_nw70/helpdata/en/43/0c033316cd2bc4e10000000a114cbd/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90cef248-29e0-2910-11bb-df8dece7e22c
http://help.sap.com/saphelp_nw04s/helpdata/en/43/18093002432e7ee10000000a114cbd/frameset.htm
http://help.sap.com/erp2005_ehp_01/helpdata/en/7e/cb743c43a311d189ee0000e81ddfac/frameset.htm
Hope this helps.
Thanks,
JituK

Similar Messages

Need info on integration of Interwoven with portal

Hi,
Can somebody throw me some info on integration of interwoven
content express with weblogic portal 4.0.
1.The content express version is 1.1.0
2.The product to be integrated is Weblogic Portal 4.0
Thanx in advance
Prashanth Bhat

Hello,
You can connect sap to .net using .net libraries.
Kind regards
Ash Thomas
Sap Consultant
<a href=http://www.ashpeople.com>Ash People, Sap Consultants & Sap Consultancy</a>
<a href=http://www.ashpeople.com>www.ashpeople.com</a>

Error while navigating planning 9.3.1 through workspace/ need info on cpx,

Hi all
Hey I installed the planning 9.3.1 and also I created the application name, using planning address. but the problem is I am unable to navigate through workspace. I am getting three dialog boxes....
" invalid or could not find module configuration"
"Required application module hyperioin planning app wizard is not configured.please contact your administrator"
" Communication error"
I'm able to see the application name in projects of shared services. Can any one face the same situation , and also I need info regarding how to initialize modules of capx and wfp.
regards
M.V

Hi,
If you did a standard install then it should be running on port 19000 as well.
I take it workspace is working fine on port 19000
http://<hostname>:19000/HyperionPlanning/LogOn.jsp
^ this will be your workspace servername..
When you run the configuration utility for Reporting and Analysis and the section "Configure Web Server", this is where you set up the Apache Server for workspace, there is an option for "Planning", this should be ticked and the correct planning server entered as it will default to the workspace server.
The apache server redirects requests on the standard workspace port 19000 to the correct server and port, so for planning it redirects to the planning server and port 8300.
Cheers
John

I need format for data in excel file load into info cube to planning area.

Hi gurus,
I need format for data in excel file load into info cube to planning area.
can you send me what should i maintain header
i have knowledge on like
plant,location,customer,product,history qty,calander
100,delhi,suresh,nokia,250,2011211
if it is right or wrong can u explain and send me about excel file format.
babu

Hi Babu,
The file format should be same as you want to upload. The sequence of File format should be same communication structure.
Like,
Initial columns with Characteristics (ex: plant,location,customer,product)
date column (check for data format) (ex: calander)
Last columsn with Key figures (history qty)
Hope this helps.
Regards,
Nawanit

RE: Need Information related to Integrated Planning and I views

Hi All,
Goodday,
We are using the Integrated Planning extensively in the Project and also FOx too.
We have came across the requiremnet like we need to add the functions whcih we are creatiung now in to the Portal???
Can Any body advice on this how to do it????
What I know as per my understanding is
Te portal is made up of RÔLES (first level menu tab). Each role can itself be made up of a WORKSET (second level menu tab) and each workset is made up of an IVIEW (link to access the input/calculation screens or analysis statuses).
ROLE
Workset1 workset2
Iview1
Iview2
Ivie3
Can any body could help me ont his what wa sthe Procedure I need to follow???
Regards
RAM

Alright Ram,
The process is first you create a ROLE, then a WORKSET, then a PAGE and within the PAGE you have IVIEWS.
Personally I dont bother with worksets and just create ROLES, PAGES and iVIEWS.
It depends on your requirements.
Cheers,
Nick.

BI Integrated Planning: Not possible to enter new rows in Webtemplate

Hello Experts,
we are trying to use the BI integrated planning, in particular we want to use the manual planning functionality with new rows, that means we want to create new rows for combinations of characteristics for which no data has been entered / loaded yet.
To test this functionality, we´ve built a very simple example consting of
-     a real time info cube with 4 characteristics, 1 key figure and one time characteristic
-     an aggregation level which contains the 4+1 characteristics
-     an input-ready query
-     a web-template with an analysis grid, sth. to select the characteristics, eg. drop-down-boxes or a navigation pane and a button to save the entered data
But now it is not possible for us to create new rows to enter data. The error message that is displayed in the top of the screen reads No new row / column inserted, since not all characteristics have a lead column.
The strange (?) thing is, that if we use the navigation pane, it is possible to draw the time characteristic as the only element to the rows and then we can enter the time characteristic, but not the key figure !
We´ve succeeded in entering data for new rows using BexAnalyzer, but we really need this functionality within a web template.
Btw, I think we´ve done the necessary adjustements for the web template (e.g. for the analysis grid number of new rows and so on)
According to our SAP Basis Administration, the OSS-Note No 984601 has already been installed.
What do we have to do if we want to enter data in new rows ? We would already be happy with a simple example / how to to know what we have do to do to build a very simple web application !
Many thanks for any help !
Frank

Okay, it has been solved (answered by SAP-Support) ! It´s so easy: the only thing you have to do is to display only keys, no text, in the query !

BI Integrated Planning: Not possible to enter u0084new rowsu0093 in Webtemplate

Hello Experts,
we are trying to use the BI integrated planning, in particular we want to use the manual planning functionality with new rows, that means we want to create new rows for combinations of characteristics for which no data has been entered / loaded yet.
To test this functionality, we´ve built a very simple example consting of
- a real time info cube with 4 characteristics, 1 key figure and one time characteristic
- an aggregation level which contains the 4+1 characteristics
- an input-ready query
- a web-template with an analysis grid, sth. to select the characteristics, eg. drop-down-boxes or a navigation pane and a button to save the entered data
But now it is not possible for us to create new rows to enter data. The error message that is displayed in the top of the screen reads No new row / column inserted, since not all characteristics have a lead column.
The strange (?) thing is, that if we use the navigation pane, it is possible to draw the time characteristic as the only element to the rows and then we can enter the time characteristic, but not the key figure !
We´ve succeeded in entering data for new rows using BexAnalyzer, but we really need this functionality within a web template.
Btw, I think we´ve done the necessary adjustements for the web template (e.g. for the analysis grid number of new rows and so on)
According to our SAP Basis Administration, the OSS-Note No 984601 has already been installed.
What do we have to do if we want to enter data in new rows ? We would already be happy with a simple example / how to to know what we have do to do to build a very simple web application !
Many thanks for any help !
Frank

Hi Frank,
please check the following as noted in the online documentation:
"You can enter plan data irrespective of whether data has been posted.
If no data is available in the analysis grid, you use input help to restrict the free characteristics to a single value or drag and drop the free characteristics into the rows. You cannot use characteristics in the columns and can use one structure only."
http://help.sap.com/saphelp_nw04s/helpdata/en/43/f234619e3c4c5de10000000a155369/frameset.htm
If it does not work anyway, open a customer message.
Regards,
Marc
SAP NetWeaver RIG

Integrated planning help

Hello iam new to integrated planning i would like to know how do we create plan data?what type of data is in realtime cube?what do we in aggregate level and what do in planning sequence.
Thanks
komal

Hi Komal,
We do no create any plan data. Real time data which we input from an input ready query is stored in a real time cube on an aggregation basis. This is done using an input ready query.Aggregation level is like a data slice used for specific data.
Let us take an example.
You have entire sales data of a company in a cube. Let us suppose u have managers of different hierarchies like regional manager, account manager and general manager. Each of them would have their own set of data. For restricting other groups to view individual data, we use the aggregation levels. To filter the data further, we use filter alongside the aggregation level. To do calculations on the data we get from aggregation level , we use planning functions where we use fox formula to manipulate data as per our needs. To integrated different planning functions in sequential order, we use planning sequence.
Say suppose we have three tasks
1.creating info object
2.creating cube
3.loading data
Each of the step is similar to a planning function, which will have specific steps to be followed .And planning sequence will be something like a process chain, where we put each of these in a sequential order to be executed .
We use planning sequences in WAD buttons to create planning applications.
Hope this helps.
Regards
Snehith.

Problem with Integrated Planning / NW2004s Sneak Preview

Has anyone successfully started the planning modeler of the integrated planning in NW2004s?
I installed the ABAP Edition of NW2004s Sneak Preview (NSP) and after that the Slim Java Edition (J2E). When starting the planning modeler I get the error message "Cannot find J2EE Engine" although the J2E-System is running according to the management console.
I suggest that you need to modify some of the parameters of the ICM. Has anyone some infos how to do that?
Thanks for your replies
Thorsten

Hi Thor,
as raja mentioned you need NW04s Java engine to integrate with NW04s ABAP sneak preview.Right now it is not available for download in SDN and service market place. it is still under ramp up and only available to SAP internal.
Thanks
Sarath.

Status and Tracking system (STS) with BI Integrated Planning ?

Hi, is posible get some images or demo for show my clients ?
i am reading Salp Help
http://help.sap.com/saphelp_nw04s/helpdata/en/b6/92bc7479fb11d5b3df0050dadfb23f/frameset.htm
and say :
You can use the BW-BPS Status and Tracking system (STS) with BI Integrated Planning. This is useful if you are already using BW-BPS with the Status and Tracking system but want to use additional functions from BI Integrated Planning.
What is additional functions from BI Integrated Planning ?
Is posible write free text in some areas for planning and option for look from high levels ?
Is posible Insert in the proces STS to <b>"Area Manager"</b> only for look status the Planning (open, in process or finishing) ?
General manager --> Lock when is finishing.
<b>Area manager</b>--> only look status the Planning ?
Submanager of area --> Responsable, Aproval, etc.
planning1
planning2
planning3
planning4
planning5
Submanager of area : Planning TOO.
Thank you ... This is important info and get some images the last version in STS working in web mode, for my client buy the product.

Hi Bala ,
Yes you can use the STS for BI IP also and you need to configure the Planning level and sub plan area and follow the steps to set up STS.
STS still has BPS flavour and can be used in IP.
Hope this helps
Raja

Problems with HowTo "Creation of BI Master Data in Integrated Planning...)

Hi,
one of our customers need a planning application in which he can create master data for different attributes, insert some key figures for this attributes and changes already planned key figured.
For the last two point I've already found a working solution, the first point (creating of masterdata in web template) is still a problem. After a little search, I found a howto-guide "Creation of BI Master Data in Integrated Planning (IP) through Web Layouts", in which the necessary steps are described, how to do this (please see following link: http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/607193d5-cdd5-2b10-c699-8ff04c3124f6)
Does anyone of you know this guide and was able to build a working solution?
I have different questions, maybe you could help me:
- what kind of variable is he using?
- do I need a DataProvider in Web Template?
- how do I get the connection to the used variable in the button group?
Thanks for your help.
Regards
Tim

Hi Timo,
you require two howtos to implement the solution.
First, please take a look at the first document:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d2b273-0e12-2c10-fab3-a34bde559f92?QuickLink=index&…
In chapter 3 you see the prerequisites (note 1101726 and notes 1384495, 1387004 and 136772). By this, you change the system behaviour, not to check if the new inserted master data is valid (it can't be valid, because the entries are new!)
And after this please implement the solution from the how to.
Furthermore you can take a look at this how to, which might help you too:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/607193d5-cdd5-2b10-c699-8ff04c3124f6?QuickLink=index&…
Even if my first post is a bit old, my customer still uses this solution, at the moment we are on 7.3 sp06, so it is working in newer releases too.
Hope this helps.
Regards
Tim

Configuration Requirement for Integrated Planning in BI 7.0 with JAVA Addin

Hi,
We have BI 7.0 with Java Add-in installation newly migrated to Unicode.
BW consultants (I am BASIS Consultant) want to use "Integrated Planning". I already checked IMG link of it & JCO destinations mentioned there are not in J2EE engine.   Even I am not able to create b'cos current setup is not on SLD.
I would really appreciate your help on below queries :
1) Can I configure Integrated Planning without using SLD ?
2) Do I need to install BI JAVA to running Integrated Planning ?
3) Do I need to install EP & EP Core ?
I already checked most of SDN thread but sorry couldn't able to get answer to above questions.   I have checked SAP Notes : 901022, 919850, 917950.
Your early reply would be highly appreciated.
Thanks & Regards,
Narsing.

Hi Balaji,
Thanks for information.   One thing to update with JAVA/JAVA addin portal core components gets installed.   So I didn't installed EP.
Now Integrated Planner is working fine.
Thanks for your help.
Best Regards,
Narsing.

Integrated Planning in COPA using KEPM and loading of quantity to SOP

Hi,
We are in process of testing integrated planning in COPA using KEPM and loading of quantity to SOP (MC87) or Transfer Qty to SOP - KE1E. I created a planning level with basic information to plan quantity on product with Period/Year, Version, Plant, Product, Record Type (F), Unit Sales Qty.
Also created Planning Package & Planning Parameter with Planning layout and entered quantity for a material which creates a profitability segment with quantity update. The problem occurs when transferring to SOP the sales quantity either using MC87 or KE1E, it goes into a loop and times out. We tried using different parameters, but ended up with same result.
Are we missing some Config/steps here, any thoughts will help.
Satish

Hi,
You need to transfer COPA plan to inactive version of SOP through KE1E. Thereafter, in PP, the same is transfered to active version through MC78. Thereafter it is transferred to Demand Management through MC74.
Please check with your PP consultant.
Trust this helps. Please assign pts if useful

Errors with Integrated Planning authorizations

Dear experts,
We are working with Integration Planning, and when we try to create or
modify whatever object (by the modeler or the wizard) we receive an error message like this:
"You have no authorization for Multiprovider XXXX"
Not only Multiprovider, but InfoCube....whatever object.
The curious thing is that we have with the user we are working a SAP ALL.
With the T-CODE bps0 we can do everything, but with T-CODE rsplan is
impossible.
Weve checked in the T-CODE su53 and everything is OK.
Weve checked in the T-CODE rsecadmin and nothing there.
Weve checked as well in the T-CODE st01, followed the actions with the
trace and all the return codes are 0.
Does anyone know what happens?
Thanks in advance
Cecilia

Hello Cecilia,
if you keep a carott in front of a donkey he will run faster... this is the same what I mean if I talked from experts: Men like to be the hero and instead of carott you need to need to laud him as an expert, he will reply faster
Lets come back to authorization: I am not sure whether RSECADMIN is a newer version of RSSM. Reason: In RSSM you can activate authorization check for a cube or MP but in RSECADMIN you administrate authorization for an user.
I am not sure, but I think that your problem is related to this issue. If not, there are very strange problems with the web authroization, its true: What we have done is to copy an exisiting BW user and assign him the same authorization like in web. Reason: To create a new user in the web does not work in all cases. We had very much problems with SP7, since we have SP10 we dont have those problems.
regards
Eckhard

Performance of "Distribute by key" in Integrated Planning

Hi
I am currently working on an assesment solution in Integrated Planning on SAP BI 7.0, SP 12.
I amcreating a small test where I have copied appr. 5500 records into a transactional cube. On this cube I have a separate aggregation level which is basis for the next step.
Then I want to distribute these 5500 records. I created a "Distribute by key" function for this without selections, doing a top-down for all, changing 0PROFIT_CTR to a specific value with the factor 50. Regarding the factor there used to be 2 lines but I deleted one to debug.
Then I added this to a planning sequence as the only function. Running this in the dialog process it reads 5500 records and moves them to the correct 0PROFIT_CTR.
HOWEVER, it takes around 30 minutes!!! Doing it in the background isn't much better. There are no other processes running, and performance is besides from this quite good.
Do you have any explanation for this?
Br Karsten

SAP has solved the issue. You can see the solution from the correspondance below:
Hello Karsten,
the filter does not only restrict the transaction data that you are
processing. It is also taken into account when the system generates
possible characteristic combinations which is done in your case.
Without restriction, the system tries to generate all possible
combinations. With a restriction in the filter, only the master data
values within the filter restriction will be used in the characteristic
relationships.
Best regards, Dirk Schneider
17.07.2007 - 12:02:25 CET    Core Team    Info for SAP
Hi Dirk
Thank you for your feedback!
However, I have an elaborating question.
Why should I restrict better in the filter? I could also filter on
period but I would still get the same amount of records. But would it
still improve performance due to the characteristic combination
creation? If so, why?
I am just trying to understand the issue, so I can avoid it in the
future.
Kind regards
Karsten
17.07.2007 - 10:56:18 CET    SAP    Reply
Dear Karsten,
it seems the situation described in SAP Note 1015400 applies to your
problem with the planning function performance.
The system is busy with creating characteristic combinations for
the characteristic relationships. Please apply the note in your
system and find a better restriction for filter DISTKEYTEST.
Then test the performance again.
Yours sincerely,
Dirk Schneider
SAP AG, Active Global Support, Regional COE EMEA

Need info on Integrated planning....

Similar Messages

Maybe you are looking for