Need info on the Delta Issue

Hi Experts,
I initialized the delta load for MAster Data Extractor and got in 500k records into BW system.Immediately after this was done completed executed the Delta Load and i see another 15k records coming.
How is this possible? I will appreciate if anybody can explain this.From my understanding  once you run the INIT and then execute the Delta it should be bringing in only deltas.In this i am pretty sure nobody could have changed 15K records within few minutes.
Thanks in Advance

Hi kedar,
Yes it did get 0 records,when i ran it second time.
But my question is why did it get so many records for Delta when i ran the delta immediately after running the INIT.I was expecting either 0 records or some small number when i ran the delta but never expected 100K records in delta.Please help me understand here if i am missing anything.
thanks

Similar Messages

  • Need info about the parameter _FIX_CONTROL in a BW environment

    Hi ,
    I have done some research about the parameter FIXCONTROL and went through the SAP note 1165319.
    We have a task at hand where SAP has recommended a new value to be added to this parameter in a BW production environment.
    Now in the above note there are an entire set of values which this parameter can take up.
    I have understood to some extent that this has to do with this Fixes if case of any issues.
    last month we have upgraded the oracle version of the database from 10.2.0.2 to 10.2.0.4.
    Can anyone help me in understanding what this MergeFix is all about?
    I need to better understand this concept.
    Thank you.
    Regards,
    Hari Kishan.

    Hello,
    still not sure if I fully understood your question; but the recommended approach regarding patches is:
    1) Apply all the interim patches recommended by SAP. For Oracle 10.2.0.4 these will those from SAP note 1137346. The merge fix from SAP note also 1165319 is mentioneded there.
    And by the way, SAP note 1137346 is updated about once a month; new patches may be added, old ones may be removed. SAP recommends to follow accordingly; but if there aren't any problems, you might want to you keep your current state for a longer period.
    2) Read all the SAP notes mentioned there. You may have to do additional tasks like setting Oracle parameters, FIXCONTROL or others. The value you have to set now may or may not be mentioned in one of these notes, I can't know.
    3) If you encounter some problem, first search in SAP notes, or if necessary open a support call with SAP. You may then have to apply additional patches and set addtional values for FIXCONTROL.
    And yes, this way the list of required patches may become specific to each customer, as customer requirements are specific.
    But it would be difficult to find the exact list of needed patches in advance.
    I think a BW consultant who is familiar with Oracle installations will tell you something similar. One who is very experienced in your scenario might also be able to recommend additional patches in advance.
    regards

  • TS3276 I need feedback for the following issue. When I send email from this 27 inch iMac, the computer adds a string of characters in vertical column that represents the QWERTY key board, all alpha numeric characters are included. Yahoo mail, issue only o

    Restating my issue / question...
    When I send email from this iMac, there is a string of characters assigned. The characters are all the "alpha numeric" characters on the QWERTY key board. This only occurs when email is sent from this iMac. The issue does not manifest when using any other lap top or computer.
    Hence, I have ruled out the issue is a yahoo mail matter.
    Again, I can access the Yahoo mail account form multiple devices and send email without unintended assignment of character strings, but when I send wmail using this iMac, the issue happens everytime.
    Characters are stacked verticaly in a column. It looks as if all characters (except function keys) are included in the string.
    Any ideas?
    GMc

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac. 
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing. 
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click the line of text below to select it:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit 
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    { sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; } | open -f -a TextEdit 
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}' | open -f -a TextEdit 
    Step 4
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit  
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit 
    Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

  • Need info on the approach for building admin forms for authoring

    Hi,
    I have a requirement to store the content in the content repository. I have two levels of data to be stored i.e. continents & countries; both continents & countries have their individual properties; continent contains countries node. I need to build a mechanism to store the content at a particular location in the JCR. The content authors should be able to add, edit or delete the continents & countries.
    What's the best way to build this admin form? Should the custom node types be created? Should a custom action type to be built? To support dynamism on UI i.e. add, edit & delete in a single form - how can it be done efficiently?
    If someone can provide me pointers, I will start with my build. Let me know if you need more information.
    Thanks,
    Chetanya

    Justin,
    The approach you listed sounds easy to implement.
    However I want to understand why out of all we choose cq:Page and why not nt:unstructured or sling:orderedFolder? Can sorting be enabled in this case?
    Also I have various scenarios where I need to store different form of data. Another example is storing product information in a alphebetical manner. There are lot of products to be stored and needs to be displayed in a tab format. The tab looks something like this A-E, F-L, M-S, T-Z, which should be configurable. Do you recommend creating one page per alphebet e:g A, B, C... and add all products (component) starting with A under page A, and so on? Or is there a better way to implement?
    Can something like calendar event be used here where in year, month and day node gets created first and then the event node is added. If so, in the above scenario how can the nodes A, B, C... be autocreated when products are added? Also the products need to be always sorted.
    Thanks,
    Chetanya

  • Need info about the IOS for 4503

    Hi There,
    we are running a cisco 4503 with bootflash:cat4000-i5s-mz.122-20.EW4.bin  IOS on that, we are informed to upgrade the IOS on that. However, no info on which IOS has to be deployed on that. Hence, can some one please suggest the latest and upgraded IOS for the Cisco 4503 switch.
    The memory details are below
    Switch#  Show verion
    Cisco Internetwork Operating System Software
    IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-I5S-M), Version 12.2(20)EW4, RELEASE SOFTWARE (fc2)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2006 by cisco Systems, Inc.
    Compiled Fri 13-Oct-06 11:35 by tinhuang
    Image text-base: 0x00000000, data-base: 0x011F879C
    ROM: 12.2(31r)SG2
    Dagobah Revision 226, Swamp Revision 34
    PT_HE_Main_110.254 uptime is 4 weeks, 1 day, 18 hours, 33 minutes
    System returned to ROM by reload
    System restarted at 17:10:55 IST Mon Feb 24 2014
    System image file is "bootflash:cat4000-i5s-mz.122-20.EW4.bin"
    cisco WS-C4503 (MPC8245) processor (revision 4) with 524288K bytes of memory.
    Processor board ID FOX103809BG
    MPC8245 CPU at 400Mhz, Supervisor V
    Last reset from Reload
    156 Virtual Ethernet/IEEE 802.3  interface(s)
    98 Gigabit Ethernet/IEEE 802.3 interface(s)
    511K bytes of non-volatile configuration memory.
    Configuration register is 0x2101
    Switch # dir
    Directory of bootflash:/
        1  -rwx    11343796   Dec 5 2006 11:28:14 +05:30  cat4000-i5s-mz.122-20.EW4.bin
    59244544 bytes total (47900620 bytes free)
    Switch #
    Thank you
    Peter

    Latest and greates IOS selection menu can be found here.
    Make sure you take the time to read the Release Notes.  

  • Need Info about the E71

    Hi i am planning to buy Nokia E71 , I just need to be sure if i can use the sound recorder without the limitation of length because i want to use this phone to recoard my lessons at school. Thanks
    Solved!
    Go to Solution.

    According to the user's manual and the help utility of the application, the upper limit is 60 minutes, presumably regardless of the available memory.
    Please note that there are two choices in relation with the record quality, high and MMS compliant. I would try both to see which one is more appropriate.
    I haven't experienced with it.
    mgoksoy

  • Need info regarding the infoobjects

    Hi All,
    My question is:
    when we display where used list for an infocube(an example), it will display the list of queries where it is been used in the system in the info-object format.(BW object list format like 4EPSFH54S2SE etc.,)
    Using this information how to find the technical name or the description of this query.
    Thanks with regards,
    Vinay

    you can use the table RSRREPDIR to get the necessary information...
    rgds, Ghuru

  • Need  info about the  Netweaver in BI certificate

    Hello, all,
    As Ravi said, there are 8 questions in BI certification about Netweaver. can any one give me some tips how to prepare this parts?
    I lose the link to the thread of Ravi, I can not find his email address.
    if you aosl have his ppt, could you please send a copy to me?[email protected]
    Thnaks a lot
    Ravi wrote in another thread:
    These are the sections that would be tested in the certification exam.
    1) Data Modeling --> 8 questions (BW 330 covers these questions)
    <b>2) Netweaver - Technical scenarios --> 8 questions (the PPT that i sent would cover this)</b>
    3) Authorization --> 4 questions (BW365)
    4) Warehouse Management --> 20 questions (BW310)
    5) Extraction --> 12 questions (BW340, 350)
    6) Reporting --> 20 questions (BW305, 315)
    7) BPS --> 8 questions (BW370 or TBW45)

    Can any one help me?

  • Need info on the request elements of OSM CreateOrderBySpecification websvc

    We are planning to develop integration from siebel to osm using AIA . We are creating the mapping for OSM webservice called CreateOrderBySpecification which will create order in osm.The request of CreateOrderBySpecification webservice have an element called Data(of type xsd:add) which will included another xml in it and is dependent on the details of order specification which is also a part of request itself.Could anyone help us in what will be the content(i.e, the content of xml) of the data element of the request for CreateOrderBySpecification and how it will be decided, and what will be the corresponding fields in siebel from where we can get these values.

    Hi,
    The answers you seek are all in Siebel bookshelf:
    Question 1: http://download.oracle.com/docs/cd/E14004_01/books/SystAdm/SystAdm_SrvrCompParam7.html#wp1008245
    Question 2: http://download.oracle.com/docs/cd/E14004_01/books/SystAdm/SystAdm_SrvrInfAdm.html#wp1003500
    Regards,
    mroshaw

  • You need to fix the "hangup" issue that firefox has. I close the browser, and 24 hrs later, it's STILL eating up all my processor time.. this IS an issue you need to have fixed.

    I dual boot between Win XP Pro x64 and Win 7 Ultimate x64. I also have a 2nd pc running strictly XP Pro 32 bit, and it's the same problem. Close the browser, and everything else takes a long time to load, even the security screen for Win7. then it takes a few minutes for task manager to show up. Seriously, I love the browser any day of the week over Chrome or IE. Fix it. kinda hard to do much when the browser is eating 90%+ of the processor

    I greatly appreciate the suggestions and the links.. I honestly looked earlier, but didn't find the ones you posted. My fault there. I have looked at them, and for all intents and purposes, I've already taken the steps they've suggested: disabled all plugins and extensions. Removed/uninstalled all plugins/extensions. Uninstalled and re-installed Firefox, no plugins or extensions.
    The problem still occurs. This isn't a problem that just started occurring, but has been relatively consistent in appearing since, v3.1 ( i think? Been going on for quite awhile)
    I'll continue to try and find just what is happening, but honestly.. I really do not believe the problem is my system.

  • Need info about the integration Process.

    HI ,
    I would like to know about the different components of Integration Process like about the Receiver etc..
    and how do we relate the properties of each component with the container.
    Thanks in advance

    hi Syed
    An integration process is an executable, cross-system process for processing messages. In an integration process you define all the process steps that are to be executed and the parameters relevant for controlling the process.
    You implement integration processes when you want to define, control, and monitor complex integration processes that extend across enterprise and application boundaries. The design and processing of integration processes is also known as cross-component Business Process Management (cross-component BPM, ccBPM).
    http://help.sap.com/saphelp_nw04/helpdata/en/68/6bfd3f9149ca42e10000000a1550b0/frameset.htm
    follow this thread to learn how to define an IP
    http://help.sap.com/saphelp_nw04/helpdata/en/68/6bfd3f9149ca42e10000000a1550b0/frameset.htm
    You use a correlation to assign messages that belong together to the same process instance. A correlation joins messages that have the same value for one or more XML elements. A correlation is therefore a loose coupling of messages: at design time, it enables you to define which message a receive step must wait for, without knowing the message ID
    http://help.sap.com/saphelp_nw04/helpdata/en/68/6bfd3f9149ca42e10000000a1550b0/frameset.htm
    regards
    sandeep
    If helpful reward points

  • Need info on the class that is used for BUILHEADER Genil query

    Hi All,
    Can some one pls let me know the class that is called by executing the query BUILHEADER.
    I m facing a strange error, everytime when i search and open any account other than sold to party in WEBUI, I am noticing soldto party in the Roles Assignment block. But the business partner in the backend is not having hte role sold to party. i am not finding how this defaulting is happening automatically.
    Any pointers/clues on this will be very very helpful.
    Thanks,
    Udaya

    Hello Udaya,
    The class is CL_BUIL_HEADER Copy it and redifine method GET_RESULT_TABLE.
    then goto SPRO I'm not remember exactly where you should change the SAP class into yours.
    Sorry it was on ICWC5.0 and not CRM2007
    Eli Steklov
    Edited by: Eli Steklov on Jul 16, 2008 3:52 PM

  • Need info about the alarms in var/adm/messages

    Hi,
    Please let me know if this error can make any harm in server ot just a notification.
    Also let me know how can i remove this alarm.
    genunix: [ID 514117 kern.warning] WARNING: Time of Day clock error: reason [Reversed by 0x1]. -- Stopped tracking Time Of Day clock.
    Thank you.
    BR//Ravi

    it seems to be you are getting this warning in solaris ,that was hosted in vmware/virtual box
    it will come once u started your saved/suspended session of soalris
    you may ignore it

  • Need to customize the variable info sent to a query string

    Hello,
    I have run into a small issue while trying to send user data
    selected from 1 DateField and 3 ComboBoxes in a form. Everything is
    sending correctly except for the DateField, when sent is places
    much un-needed info in the query string.
    For example, this is what I need it to look like in the query
    string:
    https://reservations.ihotelier.com/onescreen.cfm?LanguageID=1&HotelID=13337&DateIn=09%2F28 %2F2006&Children=1&Adults=3&Length=3
    Here is what is actually showing up right now:
    https://reservations.ihotelier.com/onescreen.cfm?LanguageID=1&HotelID=13337&DateIn=Thu%20S ep%2028%2000%3A00%3A00%20GMT%2D0700%202006&Children=1&Adults=3&Length=3
    You'll notice that everything is fine except for the DateIn
    variable. So, I guess I'm asking if anyone knows how I can
    customize the data that is sent to the query string, with specific
    characters (example: I don't need "%20" in the DateIn, however I
    need those to be "%2F"), as well as the name of the month to be
    just the month number. I need to get rid of all the time
    information in the DateIn variable. Please, any help would be
    greatly appreciated! Thank you in advance! :)
    Here is my action script right now:

    The functionality of the GIS map was important. I was given the email for the person in charge of the map, who helped me out. It appeared that he was able to outline the road in the neighborhood that I needed to focus on. That provided a parcel ID, which in turn made it possible to focus in on the proper area. This is supposition on my part; perhaps he has other info that gave him the parcel ID.
    I'm not a huge fan of Flash on other than desktops and laptops, but it is what it is, client needs to use it, I need to help the client out!
    B

  • Delta issue on a Generic Datasource

    Hi
       I had a Generic Datasource on a Z table.
       The Z table had a Date field on which Delta is based.The Postings are performed manually.
      How to solve the delta issue in the below scenario.
    Ex; A user made a manual posting with a date 09AUG2010 today and delta is extracted to BW.
        But tommorow a used made another posting with a date 14JULY2010....
    Currently that record is not being extracted....how can i resolve this
    Thanks

    Hi,
    Once the data source is created you will extract the data till that date and as the delta is set it will fetch the newly updated records .But i dont think one can post with the back dates in R/3 side.
    If i'm not wrong if you are asking regarding record got missed out them wht need to be done?
    Then do the repair full request and pull the missed delta records and it wont effect the delta settings.
    Regards
    KP

Maybe you are looking for