Need informaiton on upgarde solman system from 7.0 to 7.1

Hi Experts ,
Iam new to upgrade in Secuirty. Currently we are doing upgrade for Solman system from 7.0 to 7.1. Can you please help me how we can approach on this from Secuirty perspective.
Thanks,
Sudhakar.

This will be upgrade and if you read the upgrade guide (http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000735220&_SCENARIO=01100035870000000202&) Point 5) then I am sure you will understand the upgrade process. If you still have any queries then please update.

Similar Messages

I need to update my operating system from 10.5.8 to 10.6, I believe its the one before snow leopard and is just called leopard.

i need to update my operating system from 10.5.8 to 10.6 on my mac mini, I believe its the one before snow leopard and is just called leopard.

You seem to have your OS's confused.   Your profile says 10.6 but you are asking to update from 10.5.8.
10.5.8 is Leopard.   It is also the highest level of Leopard you can achieve.
10.6.(x) is Snow Leopard.   And 10.6.8 is the highest level you can achieve.
If you have 10.6 then all you will need to do is download and apply the combo updater.
If you have 10.5.8, then you will need to review the machine ... Mac OS X v10.6 Snow Leopard -Read the Technical Specifications
Subject the machine will take it, you will then need to buy Snow Leopard from your National on-line Apple store.
Before you start upgrading, back up your files.   If you are unsure how best to do this, the following link is hugely informative.   Most commonly used backup methods: Apple Support Communities
Once you have upgraded to Snow Leopard, your upgrade will take you to 10.6.3 and you then will need to apply the Combo updater. Mac OS X 10.6.8 Update Combo v1.1
and follow with software updates to pick up the most recent security and iTunes updates.
This will give you the best and highest level includine the App Store.
Good luck.

Need help on upgrading operating system from Mac OSX 10.3.9

We have a Imac G5 with Mac OS X v 10.3.9. We want an upgrade to run new ILife stuff. We don't know what we are doing.
What should we get to update the operating system, where, and how do we upgrade the system?
Are there any particular requirements that my computer will need? How do I know that I have them?
Is there anything in particular in the System Profile that I need to make sure that I have?
Thanks.

You don't say what iMac G5 you have, but here's the *Mac OS X 10.5 Leopard installation system requirements* http://support.apple.com/kb/TA24950 You may have to increase your RAM. A minimum of 1GB is recommended. If you click on About This Mac, you will see how much RAM is currently installed.
Leopard is no longer available at the Apple Store *but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753)*.
Suggest you download the two PDF documents at the top of this link.
 Cheers, Tom
Message was edited by: Texas Mac Man

Trusted RFC: "jumping to PRD system from DEV via SOLMAN"

Hallo!
I have the following question regarding the Trusted RFC generally in SOLMAN area and better especially within ChaRM.
We have SOLMAN and 3 satellite systems DEV, QAS and PRD.
When we generate Trusted RFC connections from SOLMAN to these satellite systems, we become scared about the following scenario:
A user accesses to DEV system and goes via Trusted RFC to SOLMAN.
From SOLMAN he chooses the Trusted RFC to PRD system and goes into PRD system.
The question:
How can this identification gap/problem be solved?
Thank you very much indeed!
H. Thomasson

Hi Thomasson,
You can restrict the access of your solman system from your DEV system.
Disable the trusted relationship in the RFC that points to Solman from Dev system.
Hope this helps.
Regards,
Kiran.

I w system from OSX 10.5.8 to at least 10.6. Also my hard drive is partitioned for Mac and Windows (which I would like to remove). How should I upgrade?

I want to buy an Iphone 5 but need to upgrade my operating system from OSX 10.5.8 to at least 10.6.0. Also my hard drive is partitioned with Mac and Windows. How can I upgrade?

1. Click here and buy a Mac OS X 10.6 DVD.
2. Use the Boot Camp Assistant in the /Applications/Utilities/ folder to return the drive to a single partition setup.
(83003)

Creating Source systems in two same logical BW systems from single R/3 sys

Hi All,
We are facing an issue while creating Source systems in two same logical BW systems, from single R/3 systems. Our Basis team is telling that if we want to connect the single R/3 system into 2 BW systems with same logical name, we will need to delete the source systems from one BW systems and create in another system. Also they told by doing so it will delete all the transfer rules and PSA table existing in the current BW system, which has the source system connectivity with the R3 system now.
Is this anyway to create the same source systems in two same logical BW systems, from single R/3 systems without deleting the transfer rules?. Also please help us to get anu OSS note or document explaining this in details.
Regards.
Muruganand.K

Hi Muruganand,
I dont think it is possible as connecting one R/3 Source System to two BW Systems.
If you could get the possible solution, please do reply to the post.
Regards,
Kiran

Can't find Restore System from Backup In utilities

Ok I messed up my os and I need to do a restore system from back up I can't seem to find the restore system from back option in my utilities when i am running the installer with the os installer disk and when i have my external hooked up it just wants me to install in to that thing I don't know what that would do. I have read the article about restoring the entire system and that what I need to do but I can 't because my messed up os wont let me restart/shutdown with out pushing the power button I am tempted to just erase and install but I don't even know how restore with my time machine and plus i am scared to do it
any help would be most welcome i have been trying to fix this for about month now

I almost understand what you wrote, but it's so confusingly written I'm not sure how to reply. So give this a try:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

How do I reorganize my photos on iPad 2? I need to move (not copy) photos from one album to another. When I use the copy function to another album, and then try to delete an image from the original album, the system wants to delete the photos from all a

How do I reorganize my photos on iPad 2? I need to move (not copy) photos from one album to another. When I use the copy function to another album, and then try to delete an image from the original album, the system wants to delete the photos from all albums. Please help.

You can't do it directly on the iPad - the new album functionality basically only allows you to copy photos into those new albums, you can't move them. The way that I think of it as working is that you are just creating pointers to the photos in those new albums, so if you then delete the original photo on the iPad you therefore automatically delete all the pointers to it.
If you want to re-organise your albums then you will need to do it on your computer and then sync those albums over to the iPad

I have big problems with mountain lion. you can not have a boot disk system I resulted in the need to re-download the os from scratch impiegandoci 8 hours, it is outrageous even with windows 95.

I have big problems with mountain lion. you can not have a boot disk system I resulted in the need to re-download the os from scratch impiegandoci 8 hours, it is outrageous even with windows 95.
at least that the operator has confirmed to me that he called me. I also have problems with either the start of the mac with the power off. I can not understand if it crashes or is just very very slow.
Finally, I have a problem with the external hard disck. I often said to have been ejected incorrectly (not true) and I start to restore the startup recovery disk because disk utility is ineffective from the normal operating system .. is a shocking thing, but how you reduced. in four years it had never happened. seem to have windows or worse. Wake up.
I am an Italian, alas, and then I would like an answer to my language because my € are the same as German French or English.

You are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
Once you are using the "Firefox" button ...
Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface

I need a operating systems from my mac book pro. I will like to change my hard drive, I need a operating systems from my mac book pro. I will like to change my hard drive

I need a operating systems from my mac book pro. I will like to change my hard drive, I need a operating systems from my mac book pro. I will like to change my hard drive

To reinstall the original OSX in your rMBP, boot the MBP using the COMMAND-OPTION-R keys. The display should show a picture if the planet earth and you will be connected to the Apple servers. Make certain that you have a solid Internet connection and follow the instructions.
For SSD options look at this link:
http://eshop.macsales.com/shop/SSD/OWC/Air-Retina/Apple-MacBook-Pro-Retina-2012- Drive-Internal-Flash
Ciao.

Need to call up a webservice created in external system from SAP

Hi folks,
A web service is created in the external system and I need to access this web service from a BADI. Can you tell me how can I call this web service (the external system is giving me a URL) and how to capture the return value from the web service. Please let me know in detail.
Thanks,
Prem

Hi,
I have the same requirement and have created a new Proxy-Object, uploaded the WSDL file (locally) and Created a Logical port.
In the Logical Port under the tab Call Parameter I've defined the URL of the web-service.
Since I was not able to upload the WSDL by selecting the option URL/HTTP Destination due to error message "HTTP error (return code 400, message "ICM_HTTP_CONNECTION_FAILED")
Message no. SPRX090" so uploaded the file locally.
However, when testing the service, I didn't received a sucess message but:
<CX_AI_SYSTEM_FAULT>
<CODECONTEXT>Local</CODECONTEXT>
<CODE> ERROR_WEBSERVICE_RUNTIME_INIT </CODE>
<ERRORTEXT> Error when instantiating the Web service runtime (Error when initializing SOAP client application: ' error_text' ) </ERRORTEXT>
<LANGUAGE />
</CX_AI_SYSTEM_FAULT>
</cls:CX_AI_SYSTEM_FAULT>
What might be the Problem ?
/Manik

Advice needed on building first system from scratch...

Ok, here goes, I am so excited, like a kid on Xmas...My goodies from Newegg will be here later today or tomorrow....I recently purchased: A new tower, Antec PSU, 2x512 Corsair pc3200, MSI K7N2 Delta - ILSR and some other assorted crap....
Anyway, I have never built a system from the ground up before...I am looking forward to the challenge....But before I begin I was wondering if I could get some tips?
I already backed up all the files(photos, demos, benchmarks etc...)that I'll be saving...I also made copies of all the drivers I need to set it up when it's done(Nvidia graphics drivers, DX9.0b), I assume the mobo drivers will come with the mobo....I also want to do a fresh install of Windows as well.....Now my main concern is in regards to the order in which everything is done....I have replaced a motherboard before so I have a little knowledge of the inner workings....But never having built one from scratch, I'm a little leary as to the order and how everything should be installed....
I will also be adding my current Vid. card, sound card?(I'm pretty sure the onboard is better?) and HDD.....Windows came installed on my machine when I purchased it so I don't have the Windows CD, but I have made the set of recovery discs that is needed to set it back to factory specs and settings...Have I forgotten anything?...Any help would be greatly appreciated...Thanks!
Silly

Quote
Originally posted by GlennVidia
Quote
Originally posted by SillySider03
Thank you guys for all the helpful replies.....
Axel, thanks for the link...It was an informative read..
Glenn, I don't have an XP CD...The OS came installed on the computer when I purchased it.....I only have the 6 recovery CD's that I made under "PC RECOVERY TOOLS"...It's an older Compaq...Oh, and it's an AMD xp2400(can be unlocked using the Speed-Strip, currently it's locked because my mobo doesn't support the OC features I so desperately want to play with..Muhahaha ).....Also, I am currently downloading the Nvidia "Unified" driver and SP1....All of a sudden, something I was looking forward to seems like the scariest thing in the world....Will this thing even boot when I get it plugged in? How am I going to install all this crap? Geez, I'm worried now...
Bogs, I will try both on-board and SB Live 5.1....I play a lot of BFV and 1942, I'll see if I can tell if there is a performance and/or increase in sound quality....What tag do you play under? See you on the battlefield!!!
Thanks again for all the replies, Silly
Well first things first, follow my suggestions on the FSB settings until you are sure it's stable and the OS has been loaded and is stable as well before you introduce overclocking to the mix...
I am a bit concerned about your Recovery CD, Most likely it'll puke on you since the motherboard and EVERYTHING except the CPU has changed? Most likely it will halt and tell you it's not a (enter name) PC and cannot continue. Try it and see.
Maybe someone has a way around it and you can discuss that in either Private Messaging or via E-mail. Please keep that little tidbit out of the forums.
bogs dollocks,
Ahhh... think you're right there, however it could have been something completely different...but that's another topic entirely...
It will cause moe headaches than it's worth. Get an OEM copy of Windows. Better yet, borrow someone else's and use your key.

TA48312 need to update system from 10.4.11 to 10.5.7 for the airport express to work

need to update system from 10.4.11 to 10.5.7 to get airport express to work, is this possible?

Yes. Since you're using a MacBook, purchase Mac OS X 10.6 on DVD.
(64416)

Cannot push from ipad calendar either wirelessly or by sync through itunes into macbook running 10.5.8 is this because I need to update my operating system?

cannot push from ipad calendar either wirelessly or by sync through itunes into macbook running 10.5.8 is this because I need to update my operating system?

cannot push from ipad calendar either wirelessly or by sync through itunes into macbook running 10.5.8 is this because I need to update my operating system?

Need to restore full system from wireless TM backup...

Yesterday, my hard drive crashed on my MacBook, took it in, and the helpful folks t the Apple Store quickly replaced it. Now I've been doing regular backups using Time Machine and a USB connected hard drive for several months now. I've restored individual files several times, but this is tyhe first time I need to do a full system restoration.
The problem lies in that the version of Leopard I have a disk for is 10.5... That does not recognize wireless hard drives. The fresh hard disk put in my computer yesterday had 10.5.1, which still does not recognize hard drives. So I had to set up my mac and then try to use Migration Assistant.
Well, Migration Assistant sees my hard drive, but then goes on to tell me "0 Time Machine backups found." I'm getting that sick feeling that I've just lost the better part of a year's worth of data. I know the data on the backup is good (as have as recently as last Saturday used it in Time Machine), but if it cannot be accessed, then it is clearly of no use.
Hooking the disk up USB directly to the computer does not work either...
Can anyone be of assistance?

I would try updating the Macbook to 10.5.3, and install any Time Machine and Airport updates (don't worry about iLife, etc.). Hopefully, your Mac will find the Time Machine drive after updating and you can restore. A note about system restores and Time Machine: after reverting to a previous backup, Time Machine needs to create a whole new backup set, so it will delete a LOT of old backups to make room for a full backup (at least that's what it did on my iMac).

Need informaiton on upgarde solman system from 7.0 to 7.1

Similar Messages

Maybe you are looking for