Need information for federation with lync online

We have an online lync account and one lync on premises account. We are trying to federate the two domains to enable chat and presence sharing between the two.
Online Lync client is [email protected] and lync on premises client is [email protected] We have updated the SRV records for ggnucfederation.com as follows to enable federation with lync online.
_sipfederationtls._tcp.ggnucfederation.com --> sip.xmppspark.in
An A record for sip.xmppspark.in has also been added in the DNS to point to lync edge server. However we notice that, when we add
[email protected] from lync online, then no TLS handshake message is received at Lync edge server.
Interestingly, if we modify the SRV record to
_sipfederationtls._tcp.ggnucfederation.com --> sip.ggnucfederation.com
and correspondingly create A record for sip.ggnucfederation.com, then TLS handshake is initiated and done.
What could we have possibly missed that is causing problem in the first case? Is it necessary to create the SRV record of type sip.<domainname>?
As per my understanding, lync online should query the srv record to get the target machine for the sipfederationtls and accordingly initiate tls handshake with the host name specified in the srv record. Is there anything more to this?

Not sure what you mean bu "Any other SRV record" above. The bottom line is that, On Prem deployment have an SRV (_sipfederationtls) record that resolve in to sip.domain.com (Access edge FQDN which is a A record) and Lync online deployment should
also have a SRV record (_sipfederationtls) that resolve in to sip.domain.com (CNAME Record) which points to sipfed.online.lync.com (A record which ger created automatically)
http://thamaraw.com
Thanks Thamara for your replies!
By 'any other SRV record' i meant, that I wish to make the srv record (_sipfederationtls._tcp.ggnucfederation.com) point to sip.xmppspark.in. The reason for this is that our certificates are by this CNAME i.e. sip.xmppspark.in. So there is any way I could
achieve that?
Interestingly, does this restriction only applies to lync 2013 and office 365? I mean, I was going through some other forums, for lync 2010, where I found that people were using access edge fqdn as the sip srv record which was not necessarily sip.domain.com.

Similar Messages

Lync Enterprise Coexist with Lync Online

hi all,
wanna ask about Lync On-Premise with Lync Online.
I want to deploy one Lync standart Edition in my branch company but in my HQ have Lync Online 365.
the scenario is like this.
- user in HQ have thier account in Office 365
- I have created Lync Server 2010 in my branch company, but before that I try to federated the Active Directory on-premise with Office 365 using ADFS
I wanna know that, could user in office 365 login to m lync on-premise ?
It is possible to coexist between lync on-premise with lync online ?
Thanks,
Rudi

Post is over a year old so you are likely all set but I will post the answer here in case anyone else can benefit.
The reason the same SIP domain cannot be used for both on-prem and O365 is due to DNS. Various DNS / Resource records are needed which point clients to the Lync services' by way of the SIP domain. This can only point to one place, not two places. So, if
your user is [email protected] for the sip domain, the client will look for resource records for contoso.com that relate to Lync and direct traffic to either Lync online or an on-prem Lync server depending on where your
records point.
What you might have to consider (Or already did based on the age of your post) is to implement a coexistence model using Federation and Dirsync. Lots of time and resources involved here but will allow you to operate in both online and local environments.
Hope this helps you or others. I am now in the middle of planning my own migration strategy and this is what I am learning.

Need Information For Connecting Access point to WLC 4402

Hi Friends
I need Some information for Connecting my New Access point ( Cisco AIRLAP 1242AG) with WLC(4402) Controller
In our network set up we have two WLC(4402) we needs to Connect this New Accesspoint To one of our WLC
My Access point is brand New. I need to Know what all i have to do inorder to connect this AP to the controller (from Acesspoint perspective & WLC perspective)
I need to Know what I need to do in AP to connect to the Controller
Do i need to Assign Static IP Address forAP or after connecting to the switch it automatically gets ip from DHCP and regsiter with controller??
Do i Need to Configure my AP with default gateway(the switch to which is connected ?) & DO i need to configure the AP with Controller Ip address ??
Pls Assist
Regards
Safwan

Hi Scot...
We tried Connecting the Access Point yesterday, but it failed....
We are using Cisco 3500 Access point ...
when we connected , first it automatically got an ip address using DHCP but following error occurred
P70ca.9bd5.77c6#
AP70ca.9bd5.77c6#
AP70ca.9bd5.77c6#
Not in Bound state.
*Mar 1 00:13:56.539: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination
*Mar 1 00:13:56.555: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigne
d DHCP address 10.50.11.26, mask 255.255.0.0, hostname AP70ca.9bd5.77c6
*Mar 1 00:14:04.564: %CAPWAP-3-UNSUPPORTED_WLC_VERSION: Unsupported version 6.0
.182.0 on WLC USSTLController01
*Mar 1 00:14:14.564: %CAPWAP-3-UNSUPPORTED_WLC_VERSION: Unsupported version 6.0
.182.0 on WLC USSTLController01
*Mar 1 00:14:24.564: %CAPWAP-3-UNSUPPORTED_WLC_VERSION: Unsupported
version 6.0
.182.0
version 6.0
.182.0
on WLC USSTLController01
version 6.0
.182.0
Then I COnfigured Ap with Static ip address & default gateway & controller Ip but tht too didnt work...
.182.0 on WLC USSTLController01
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>
*Mar 1 00:13:40.908: %CDP_PD-2-POWER_LOW: All radios disabled - NEGOTIATED WS-C
3750X-48P (e05f.b907.9a20)
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>en
Password:
AP70ca.9bd5.77c6#
*Mar 1 00:13:48.033: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP
. Renewing DHCP IP.
AP70ca.9bd5.77c6#
AP70ca.9bd5.77c6#
AP70ca.9bd5.77c6#
P70ca.9bd5.77c6>
*Mar 1 00:13:40.908: %CDP_PD-2-POWER_LOW: All radios disabled - NEGOTIATED WS-C
3750X-48P (e05f.b907.9a20)
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>en
Password:
AP70ca.9bd5.77c6#
*Mar 1 00:13:48.033: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP
. Renewing DHCP IP.
I also Need to Know Cisco Access point 3500 can be associated with WLC 4402 ( version 6.0.182.0) ??
Pls Advice How to proceed further

Need information for all the Fields on Infotype 94.

Hi all,
I have a question on Infotype 94 which holds all the information of I - 9 form. I would like to know which field goes with what details when we are trying to take details from I - 9 Form. I need a example how would it look for a Alien authorized worker and a permanent Resident and US citizen.
Please help me out in this issue.
Thank you.

Residence Status (Infotype 0094)
Definition
Infotype 0094 allows you to store information regarding an employeeu2019s residence status, as well as information regarding the compliance with the Immigration Reform and Control Act (IRCA), which requires every employer verify that each person hired can prove via documents their identity, and their eligibility for employment.
Structure
This infotype is divided into two parts: the personal identification information section (the residence permit) and the employment verification section (the work permit).
Personal identification
This section stores the information for personal identification. The only field which is required on this infotype is Residence status.
The ID type field describes the type of documentation the employee presents to the company. You can also enter data for the issuing authority.
The ID number is the number of the document provided by the employee to the company. The Issuing date is the date on which the personal identification document was issued to the employee. This date must be the same as or later than the employeeu2019s date of birth.
Lastly, the ID expiry date field is the date that the provided identification expires.
If the expiration date is filled, and there is a value of A (Alien) in theResidence status field, then this transaction will automatically generate a transaction to store a deadline for the expiration of the work permit (infotype 0019, subtype 71).
Employment verification
This section stores the information for employment verification. The Work permit field stores the type of work permit. The Work permit number field stores the number of the document provided by the employee to establish work eligibility.
The date issued and the issuing authority are also stored. The Expiry of work perm. field stores the date on which work eligibility expires. This field should only be filled for those employees who are not citizens
http://help.sap.com/erp2005_ehp_05/helpdata/EN/2c/8323d0571111d182d40000e829fbfe/frameset.htm

Skype connectivity with lync online plan1

hi ,recently I purchased lync online plan1 to enable skype connectivity with lync but not able to add any contact from lync client as I am using lync 2010 client at windows pc and lync 2011 client at mac PC
and I already enabled external communication setting for public messenger like skype from lync admin center(office365 based).

Hi skype user,
As Edwin mentioned, you could try to update your client to the latest version.
For Windows, you could install the Lync 2013 Basic.
http://www.microsoft.com/en-us/download/details.aspx?id=35451
For Mac OS , you could install the latest update “October 2014 update for Lync for Mac 2011 14.0.10”
http://www.microsoft.com/en-us/download/details.aspx?id=36517
If it still does not work, you could post the question on Office365 forum for assistance. Thank you for your understanding.
http://community.office365.com/en-us/f/166.aspx
Best regards,
Eric

Need information for table maintenance genarator?

HI Sir,
I have a tcode for table maintenance generator of Z table, my requirement is to add new field to that Z table.
Is it required to maintain table maintenance generator again for that table and how to assign the same tcode for that.
plz help me to solve this.
thanks and regards
syed
Basic question. Please put some effort from your side before posting here. You have already been warned against breaking the rules of this forum. Continued violations will lead to account deletion.
Edited by: kishan P on Sep 2, 2010 11:59 AM

Hi Taj,
When you add your new field in the table, the table gets partially active first, then you need to Adjust the table using Database Utility (SE14) to get the table activated.
For Database Utility see online help [Database Utility|http://help.sap.com/erp2005_ehp_02/helpdata/EN/a4/3790360ee65840e10000009b38f839/frameset.htm]
Then You need to regenerate the table maintainence Generator.
Hope this helps.
Regards
Abhii
Edited by: Abhii on Sep 2, 2010 7:06 AM

I need example for VARIABLES with Customer Exit.

hi every body i need example for Variable for Customer Exit.

Hi,
You can define 'Formula' variables in your customer exit..for example..
you need to calculate no of machine running hours per month, in order to
caculate the machine total utilization time..in this context.. you need to know
how may hours are there in an month by month..
you can define a variable and write the code in the customer exit for deriving the total no. of hours available for that month and get that value into a variable for further calution like deducting the down time and set up time so on..in your
calculated KF..
Hope this helps..
Assign points if useful..
Cheers,
Pattan.

Need information about notification with SAP Netweaver Identity Management

Dear Experts,
I need some informations about send e-mail from SAP NIM. We want to send an e-mail after creation of sap users etc.
Please note that today we have a Domino/Lotus server.
I undertsood that we can send e-mail through the Identy Center (IC) component. But I did not find how to set up this solution? I did not find architecture informations?
Could you please provide me the different configuration steps?
Should I install another component? Or I just have to configure my SMTP Server?
Also, have you got the best practices for this step?
Thanks a lot for your help
Regards
Hocine NAÏ

Hello,
For notification, first you need to create a repository of generic type and provide the lotus notus host details in the repository constant.
Eg:
EMAIL_SERVER abc.def.com
EMAIL_ORIGINATOR orignator mail ID
Then create a task with the "To Generic" type Pass.
Select the name of the function below in the Next data entry of the Destination tab of the pass.
and provide the attribute and value as below:
MSKEYVALUE %MSKEYVALUE%
EMAIL_RECIPIENT recipients mail ID
EMAIL_SUBJECT Hello %DISPLAYANEM%
LOCATION %LOCATION%
Eg of a Function to sent mail is shown below:
function SendEmail(Par){
 Recipient = Par.get("EMAIL_RECIPIENT");
 Subject = Par.get("EMAIL_SUBJECT")
 Location = Par.get("LOCATION");
 Body = "This is a report from SAP NetWeaver Identity Center at %$ddm.date% %$ddm.time% ";
 Body = Body + "Your location is " + Location + " ";
 Body = Body + " ";
 Body = Body + "Best regards ";
 Body = Body + "MaXware AS ";
 UserFunc.uSendSMTPMessage("%$glb.EMAIL_ORIGINATOR%", Recipient,Subject,Body,"%$glb.EMAIL_SERVER%",1);

Need information for icloud or streaming

wath is the form for eraser information in iclud or estreaming

The iCloud provides a backup copy, which you can "redownload" if you need a new copy. It does not provide streaming.
You may be confusing it with the Amazon cloud service, which provides both backup and streaming, i.e. you can either download the music or play it directly from the cloud.

Need information for which patch will be best on top of OWB 10.2.0.1

Hi ,
Can anybody tell us what are the options of patches for applying on top of
current Oracle warehouse Builder (OWB Client 10.2.0.1.31 ) and (OWB Repository 10.2.0.1.0.)
OS is windows 2003 server 64 bit
Server- HP Itanium with ram 8 gb
Also want upgrade OWB server on top of Client.
and can you suggest what should be best h/w config for this to handle more than 1 TB data in DWH.(2 gb/day)
from where we can Download it ?
Pl revert back to my mail id also [email protected]
Regards
-Umesh
Edited by: Umesh_owb on Aug 3, 2009 12:39 PM

Thanks Dear,
can we direct apply 10.2.0.5 on the top of 10.2.0.1 of owb ?
and can you share link from where we can download OWB 10g r2 server, coz need to convert our client of owb into server of owb then only need to apply patches.
So Pl .....
@ waiting for reply
Regards
Umesh

Need information for how to capture, transmit and receive a DTMF tone

Hello every body
I would like to implements the DTMF where i need some information that hoe i can
1) Capture the tone mean when i press button 'one' it has to capture and generate a vaoice file.
2) And i need to transmit the same thing to a remote system.
3) At the remote system how i can reveive and identify that the tone is for 'one'.
Thanks to ............. advance
Sreenath Kulkarni

JMF isn't the right tool - it's about handling media streams
You could use it to capture the audio source, then obtain the audio samples,
But you would then have to perfom some signal processing on it to interpret/decode for tone detection
This is what should already be available via the JTAPI API (haven't checked but should do this sort of thing)
ie you should be able to code up an application that receives 'DTMF Tone' events & does whatever you need to do in response
This is what IVR systems do

Need information for how to Capture, Transmit, and Identify a DTMF tone

Hello every body
I would like to implements the DTMF where i need some information that hoe i can
1) Capture the tone mean when i press button 'one' it has to capture and generate a vaoice file.
2) And i need to transmit the same thing to a remote system.
3) At the remote system how i can reveive and identify that the tone is for 'one'.
Thanks to ............. in advance
Sreenath Kulkarni

JMF isn't the right tool - it's about handling media streams
You could use it to capture the audio source, then obtain the audio samples,
But you would then have to perfom some signal processing on it to interpret/decode for tone detection
This is what should already be available via the JTAPI API (haven't checked but should do this sort of thing)
ie you should be able to code up an application that receives 'DTMF Tone' events & does whatever you need to do in response
This is what IVR systems do

Need information for launching executable

Hi,
I try to launch an executable file on a network location and I don't want that user are prompted for action, everything has to be done silently.
Actually the installation are silently made beacause of a silent executable version but at first user are promted with this system message: "This executable come from an unsecure non-local location, are you sure do you want to run it [Run] [Cancel]" something like that, so how can I avoid this message please?
This message appear when I try to launch exe as loged-on user and nothing happend when I launch it via System secure user.
Zenworks Control Center 11.2.3.0

Originally Posted by adfadmin
Hi,
I try to launch an executable file on a network location and I don't want that user are prompted for action, everything has to be done silently.
Actually the installation are silently made beacause of a silent executable version but at first user are promted with this system message: "This executable come from an unsecure non-local location, are you sure do you want to run it [Run] [Cancel]" something like that, so how can I avoid this message please?
This message appear when I try to launch exe as loged-on user and nothing happend when I launch it via System secure user.
Zenworks Control Center 11.2.3.0
See here: http://social.technet.microsoft.com/...orum=itproxpsp
You could run it as dynamic admin but then you need to specify network credentials so that dynadmin has access to the network share:
Select credential for network access: If the file or directory specified in the action are a part of the UNC path or network share that can be accessed only through credentials, then browse through the credential vault to select a credential that has access to the network.
http://www.novell.com/documentation/...u.html#bc5px2u
Thomas

Do you need cuda for playback with 4k on Macbook pro late 2013?

My question is, I have a macbook pro (late 2013) i7 ,16G ram , nvidia Gforce 750m with 2GB ddr5, mavericks osx 10.9.1.
Does this machine playback 4k with software only? or does it needs to have cuda enabled?
Because i did several tests first with RED files 4k and even with resolution on 1/4 i still have drop frames. Then i tested with Arri Alexa RAW files 2k, and premiere simply can have a decent playback no matter the resolution 1/2 lags and droped frames, 1/4 its a no go because it has a lot of pixels can't really see whats happening.
One more test was the 4k Canon IOS 1-D files. These files again look like the arri ones, i dont have a playback no matter the resolution!! These files i cant even playback them on VLC they lag all over the place.
I runned the files on the internal SSD 700MB Read write, and then on a lacie us3, same problem. On premiere with software only and with cuda, same thing.
(i already posted on a diferent discussion, im having droped frames with cuda enable on simple H264 files, so maybe for 4k is possible, but only when cuda option fully works)
So its there a problem with my computer, or you guys think its adobe premiere CC ?
Thanks

CUDA doesn't help at all with playback. It only helps with effects, scaling, blending modes and such.
For that kind of media, you really should be looking at a proper workstation with five internal drives:
System
Projects
Cache/Scratch
Media
Exports
And you might want to consider making that Media drive a RAID 3, which means a minimum of seven internal drives.

Need guidance for working with the available example labview VI

Hello,
I'm working with the pulse signals and the pulse signals will be effected by the motion artifacts.There is similar thread available on labview here Adaptive filtering to cancel out noise from an pulse signal for removing the motion artifacts from pulse signals.so,I am planning to use the vi posted in the thread as LMS block by block(example) with sampling rate of 100Hz and number of samples needed=100 using DAQPad-6015/6016.
But I am confused with the channels of DAQ as the author(who bulit this vi) says the channel0 for signal and channel1 for reference signal as shown in the attached image.
1)If channel1(aio) of DAQ is feeded with the analog input of pulse signals then what is the input needed/feeded to the channle1 of DAQ.
2)Can I directly use the vi by changing the sampling rate of 100hz and number of samples=100 or anything else is needed for this requirement.
Can someone explain me the required input to the channels and settings with the DAQ. thanks.
Attachments:
LMS_example.JPG ‏127 KB

Hello,
can someone explain how the DAQ channels settings are to be done.
thanks.

Need information for federation with lync online

Similar Messages

Maybe you are looking for