Need information for how to Capture, Transmit, and Identify a DTMF tone
Hello every body
I would like to implements the DTMF where i need some information that hoe i can
1) Capture the tone mean when i press button 'one' it has to capture and generate a vaoice file.
2) And i need to transmit the same thing to a remote system.
3) At the remote system how i can reveive and identify that the tone is for 'one'.
Thanks to ............. in advance
Sreenath Kulkarni
JMF isn't the right tool - it's about handling media streams
You could use it to capture the audio source, then obtain the audio samples,
But you would then have to perfom some signal processing on it to interpret/decode for tone detection
This is what should already be available via the JTAPI API (haven't checked but should do this sort of thing)
ie you should be able to code up an application that receives 'DTMF Tone' events & does whatever you need to do in response
This is what IVR systems do
Similar Messages
-
Need information for how to capture, transmit and receive a DTMF tone
Hello every body
I would like to implements the DTMF where i need some information that hoe i can
1) Capture the tone mean when i press button 'one' it has to capture and generate a vaoice file.
2) And i need to transmit the same thing to a remote system.
3) At the remote system how i can reveive and identify that the tone is for 'one'.
Thanks to ............. advance
Sreenath KulkarniJMF isn't the right tool - it's about handling media streams
You could use it to capture the audio source, then obtain the audio samples,
But you would then have to perfom some signal processing on it to interpret/decode for tone detection
This is what should already be available via the JTAPI API (haven't checked but should do this sort of thing)
ie you should be able to code up an application that receives 'DTMF Tone' events & does whatever you need to do in response
This is what IVR systems do -
I need information on how Adobe Drive works and how to set it up
Hey folks,
believe it or not, but I have been searching a lot on the web already on how to find information how Adobe Drive works and how to set it up.
Most information that I found is old and seems to be valid only for older versions of Creative suite. Here in the company we use CS5.5 and will switch to CS6 soon.
I already downloaded Adobe Drive 3 and installed it on my Mac. Unfortunately I don't know what to do next? Do I need Adobe CQ to make it work? Or can I use it with an existing SVN infrastructure, that we have here? Actually I would like to access the SVN via Adobe Bridge. But after the installation of Adobe Drive my Bridge CS5.5 is crashing while starting up, and I didn't find out how to fix this again.
Actually I just found the manual for Adobe Drive 3 and read it. Seems to be easy in case its working. But it's not in my case, as mentioned above.
Any idea what could be the problem?Thanks,
in the meantime I managed to re-setup Adobe Drive 3 again. Bridge CS5.1 is still crashing (i have a log-file with a detailed error-report, if somebody knows how to extract information from this.
At least now I can start Drive as a standalone application.
So now my main question is how to connect Drive 3 to our subversion infrastructure in the company. Does anybody have information on this? -
Need instructions on how to download photos and videos from my Samsung cell to my iPhoto
Need instruction for how to import photos and videos from my Samsung cell phone to iPhoto. Thx
Copy the files to the Mac and then drag them to the iPhoto window, or use the File -> Add to Library command
As for how to connect the phone and the Mac, for that you'll need to read the manual for the phone or seek support from a Samsung or Android (that's the operating system) site. -
I'm a Microsoft Outlook for Mac user, I need information of how to know when e-mail was readed and confirm receipt of e-mails sent. thank you! regards Mauricio
Mail and Address book
-
Need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook.......
need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook? removal of cmos, resetting laptop, using cccleaner, windows password recovery and hiren's was noneffective, any help is appreciated. thanks
Hi,
As your notebook is a business class machine, security is more stringent - the password is stored in non-volatile memory and there are no 'backdoor' passwords. Your best option would be to contact HP regarding this.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
I have Adobe Pro online monthly subscription. I need to know how to fill in and sign forms already downloaded as PDF's
Hi Schoolcoach1,
Please see the following Help documents:
Acrobat Help | Filling in PDF forms
Acrobat Help | Signing PDFs with Adobe EchoSign Electronic Signature
Please let us know if you have additional questions.
Best,
Sara -
How can I repair my IPod n still have all my information in it or can i get a new one but still with all my information for how much
- Apple will exchange your iPod for a refurbished one for this price. They do not fix yours. Apple does not transfer any data.
Apple - iPod Repair price
- To backup all your data to computer follow the instructions here. However, do not restore from backup until you have the replacement/repaired iPod. -
I need recommendations for an emac 1.42 and ibook 1.33 compatible external superdrive ?
I need recommendations for an emac 1.42 and ibook 1.33, OS 10.3 - 10.5 compatible external superdrive ?
If you need the drive to be able to boot those Macs, you'll need FireWire connectivity. If you ned to use a system optical disk to upgrade or re-install the OS. or repair your hard drive, you must boot from the optical drive. If either computer's built-in optical drive has failed, or does not support reading DVDs, you'l need to boot from an external sooner or later.
If all you need is a burner, then USB opticals are cheaper and should work fine.
This firm tests all their stuff for Mac compatibility:
http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Price%7c0&Ne=5000&N =6866&Ntt=external+optical -
Hi there
Accualy I have 2 problems with Pages
1- How can I get more Arabic Fonts with More Decorated style
2- The typing in Arabic should be from right to left and in Pages it's Happining but the typin marker is not doing this so its hard to fix any mistakes in the middel of the paragraph.
- how to change the alignment from left to right (Ctrl + Shift in MO Word) to do the hall text from right to left not only the paragraph Icon
I think this will afect the other application Im using If some one help me with it."Many" is an exageration, you can count R to L languages on one hand.
Mostly they are used in countries which try not to pay for their software, and seem to have a pretty shoddy printing industry, so not much incentive for developers.
However Arabic is a major language and Apple should fix the problem.
As Tom suggests try Mellel, which is the best solution on the Mac.
Adobe has ME versions of both Indesign and Photoshop, for which you pay extra. They mostly work well.
MsWord for Windows (not the Mac) does reasonably well, but I have not tried its DTP features with Arabic so can't vouch for how solid they are in Word.
Peter -
I need information regarding the creation of Workbook and WAD.
Hi,
I need information regarding the How to create the Workbook and WAD.
Can any one help me to get the information..
Regards,
Suman
Edited by: Suman Reddy Vuyyuru on May 19, 2009 8:22 AMHi,
for workbook:
[Queries in Workbook|http://help.sap.com/saphelp_sem40bw/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm]
for WAD:
[WAD for Beginners|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22]
thnks. -
hi everyone: I require some information on how to upgrade from 10.5.8 to make my mackbook pro compatable
with the iphone upgrade. Please note that I have gone thru the upgrades on this computer and it tells me there are
no new ones available...... I need to get my upgrade past the 11.5.1 level.....so do I need to purchase a new
upgrade program....and if so which one...as I have been thru the apple store and so far as i can tell
the ones that are listed such as maverik, lion and snow lepard are not high enough.
To anyone who replies, thankyou so much for taking the time to help me. It is truely appreciated.11.1.5 is likely to be the version of iTunes you are being asked to run, not the version of Mac OS X.
To get a higher version of iTunes, you likely have to upgrade Mac OS X. All Roads lead through the 10.6 Upgrade, available as a physical DVD only, from the Apple Online store for about US$20:
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
This is one of the most benign Upgrades Apple has ever issued. The size of the Operating System gets smaller, performance is slightly faster, and very few Applications are left behind. If you have some older PowerPC Applications, you may need to ask to install the Optional Rosetta emulator for PowerPC code when you install.
Once your 10.6 install is fully Updated to 10.6.8 using Software Update, the Mac App Store will appear, and future upgrades (if needed) will be handled through variations of online purchases. -
Need Information about how to integrate with Struts
i need information/sample code for how to integrate flex with
jsp/struts.
please help meHi Dimitri,
I am looking for 820,824 for ANSIX12 format.
And i guess SAP has provided example mappings only for 810,830 and 850.
I am unable to see the example mappings provided by sap for 820/824 in B2B mapping toolkit.
Is there any way or place to find the example mappings for these formats?
Regards,
DInesh Male -
Need Information For Connecting Access point to WLC 4402
Hi Friends
I need Some information for Connecting my New Access point ( Cisco AIRLAP 1242AG) with WLC(4402) Controller
In our network set up we have two WLC(4402) we needs to Connect this New Accesspoint To one of our WLC
My Access point is brand New. I need to Know what all i have to do inorder to connect this AP to the controller (from Acesspoint perspective & WLC perspective)
I need to Know what I need to do in AP to connect to the Controller
Do i need to Assign Static IP Address forAP or after connecting to the switch it automatically gets ip from DHCP and regsiter with controller??
Do i Need to Configure my AP with default gateway(the switch to which is connected ?) & DO i need to configure the AP with Controller Ip address ??
Pls Assist
Regards
SafwanHi Scot...
We tried Connecting the Access Point yesterday, but it failed....
We are using Cisco 3500 Access point ...
when we connected , first it automatically got an ip address using DHCP but following error occurred
P70ca.9bd5.77c6#
AP70ca.9bd5.77c6#
AP70ca.9bd5.77c6#
Not in Bound state.
*Mar 1 00:13:56.539: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination
*Mar 1 00:13:56.555: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigne
d DHCP address 10.50.11.26, mask 255.255.0.0, hostname AP70ca.9bd5.77c6
*Mar 1 00:14:04.564: %CAPWAP-3-UNSUPPORTED_WLC_VERSION: Unsupported version 6.0
.182.0 on WLC USSTLController01
*Mar 1 00:14:14.564: %CAPWAP-3-UNSUPPORTED_WLC_VERSION: Unsupported version 6.0
.182.0 on WLC USSTLController01
*Mar 1 00:14:24.564: %CAPWAP-3-UNSUPPORTED_WLC_VERSION: Unsupported
version 6.0
.182.0
version 6.0
.182.0
on WLC USSTLController01
version 6.0
.182.0
Then I COnfigured Ap with Static ip address & default gateway & controller Ip but tht too didnt work...
.182.0 on WLC USSTLController01
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>
*Mar 1 00:13:40.908: %CDP_PD-2-POWER_LOW: All radios disabled - NEGOTIATED WS-C
3750X-48P (e05f.b907.9a20)
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>en
Password:
AP70ca.9bd5.77c6#
*Mar 1 00:13:48.033: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP
. Renewing DHCP IP.
AP70ca.9bd5.77c6#
AP70ca.9bd5.77c6#
AP70ca.9bd5.77c6#
P70ca.9bd5.77c6>
*Mar 1 00:13:40.908: %CDP_PD-2-POWER_LOW: All radios disabled - NEGOTIATED WS-C
3750X-48P (e05f.b907.9a20)
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>en
Password:
AP70ca.9bd5.77c6#
*Mar 1 00:13:48.033: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP
. Renewing DHCP IP.
I also Need to Know Cisco Access point 3500 can be associated with WLC 4402 ( version 6.0.182.0) ??
Pls Advice How to proceed further -
Need information for all the Fields on Infotype 94.
Hi all,
I have a question on Infotype 94 which holds all the information of I - 9 form. I would like to know which field goes with what details when we are trying to take details from I - 9 Form. I need a example how would it look for a Alien authorized worker and a permanent Resident and US citizen.
Please help me out in this issue.
Thank you.Residence Status (Infotype 0094)
Definition
Infotype 0094 allows you to store information regarding an employeeu2019s residence status, as well as information regarding the compliance with the Immigration Reform and Control Act (IRCA), which requires every employer verify that each person hired can prove via documents their identity, and their eligibility for employment.
Structure
This infotype is divided into two parts: the personal identification information section (the residence permit) and the employment verification section (the work permit).
Personal identification
This section stores the information for personal identification. The only field which is required on this infotype is Residence status.
The ID type field describes the type of documentation the employee presents to the company. You can also enter data for the issuing authority.
The ID number is the number of the document provided by the employee to the company. The Issuing date is the date on which the personal identification document was issued to the employee. This date must be the same as or later than the employeeu2019s date of birth.
Lastly, the ID expiry date field is the date that the provided identification expires.
If the expiration date is filled, and there is a value of A (Alien) in theResidence status field, then this transaction will automatically generate a transaction to store a deadline for the expiration of the work permit (infotype 0019, subtype 71).
Employment verification
This section stores the information for employment verification. The Work permit field stores the type of work permit. The Work permit number field stores the number of the document provided by the employee to establish work eligibility.
The date issued and the issuing authority are also stored. The Expiry of work perm. field stores the date on which work eligibility expires. This field should only be filled for those employees who are not citizens
http://help.sap.com/erp2005_ehp_05/helpdata/EN/2c/8323d0571111d182d40000e829fbfe/frameset.htm
Maybe you are looking for
-
Oracle Database Required for Install???
I am doing just some general testing of the 9iAS and Portal server products. I would like to try and build a few test portlets with Java and URL based. Is a database install of Oracle 9i required to properly work with Portal? Can I install Oracle 9i
-
Change Value based on Dynamical Object
Goal: The goal is to make the variable with value '2014-06-14 09:00:00.000' Problem: The syntax code is created as a dynamical object how do you make it from '2014-06-14 16:20:10.000' into value '2014-06-14 09:00:00.000'? DECLARE @a datetime = '2014-
-
Set up separate online account
I bought a phone under my daughter's account using her employee discount. She already has a phone, but I (we) would like to set up my phone on a different online account instead of being combined. I would like separate billing. Is this possible? Even
-
Print RFKORD50 only for customer line ?
I have to print credit note only for customer line (account type 'D'). Then I use TCode F.62 using printing program RFKORD50. But RFKORD50 will print for customer & vendor line. Could you please to help me to only print customer line ? Is there any
-
AS2 with AIR 1.5, code to open a local PDF view
Does anyone know how to do this. I want to make a simple button that will open a PDF for users to print a file. A button to directly print would be even better. Kyle