Need Information for the Status & usage in the routing

HI all,
I need some inforamation , what is impact if i will use in the routing , usage 1- Production & 4 -- released general & Suppose i will use universal 3 & 4 released general . What will be impact .
Regrads
satish

Hi Satish ,
Task list type usage Key specifies the areas in which the task list can be used (for Example, in production or plant Maintenance).
Status: You use the status key to indicate the processing status of a task list. For example, you can indicate whether the task list is still in the creation phase or has already been released.
Dependencies: Note that certain transactions are dependent upon the status of the task list. For example, you can only include a reference operation set in a routing if the routing has the status "Released (general)".
Case 1: If you use
Usage 1 - Production     If you use the usage key as 1 that means that the task list can only be used in Production if the status is released only.
Status 4 - Released (General)
Case 2 :
If you use
Usage - 3   Universal   which means that the routing can be used in the Production , Engg/ Design, Plant maintenance areas etc if the status is released only.
Status - 4 Released(General)
Hope it is useful for you.
Thanks
Srinivas

Similar Messages

Comparing the BOM usage with the actual usage for materials.

Hi All
My client want to compare the BOM usage with the actual usage and have a report for this within a period? More specified they want to calculate the BOM usage, based on the requirement quantity from confirmation - but with out the scrap %. mulitplied with the confimed quantity of the header material.
The actual usage should be based on goods issuing from stock, either as goods issue to order (backflushing) or as goods issue to cost center.
I havent been able to indentiy a standard report for doing this - does some of you know a standard report?
- I was thinking of the following method:
Look at tabel RESB and compare it with MSEG, but I have some diferent problems with this.
- In resb there is no qty before scrap.
- The data amount from MSEG, is so huge so it is not possible to make a data search for a whole period (eg. month)
Br. M

There is one std report MCRX which gives a comparison of quanity in order and actual consumption,
if it doesnt meet your need, you may have to create a custom report.
logic can be find the quantites as per BOM for the produced quantities
issued quantities to the order
tables you may need are AUFK AUFM
AFKO, STAS STPO
MSEG, MKPO
JEST ( if you want to filter using order status)

How can I put information in the status line at the bottom of the window

Hi, I need to put some information on the status line, like username and database name. How can I do this?
If someone know how to do this and could show some sample code, please, put in this.
Thank you,
San

Thanks, but this put a message in the message line, and I need to put this in the status line below the message line, where are displayed messages like "enter query", "execute query", "list of values" and etc...
Is this possible?
Thanks

I am Greek. I downloaded a film from ipad but for the last days it has not been downloaded and the status is "waiting".the charge has been made to my credit card. Does any body knows?

I am Greek. I purchased a film from ipad but for the last days it has not been downloaded and the status is "waiting".the charge has been made to my credit card. Does any body knows?

something other is dowloading somewhere on ipad

Itunes 11.4.0.18 crashing when clicking on app store Itunes is getting crash when clicked on app store. I tried to get some information for this crash and got the above message in debugging mode. Please fix this if required but i am unable to open

Itunes 11.4.0.18 crashing when clicking on app store
Itunes is getting crash when clicked on app store. I tried to get some information for this crash and got the above message in debugging mode. Please fix this if required but i am unable to open app store.

Click here and follow the instructions to change the iTunes Store country.
(97125)

I need to download adobe without installing it I need it for a machine not on the net

I need to download adobe without installing it I need it for a machine not on the net

You can try the full offline Reader installer from
http://get.adobe.com/reader/enterprise/

How to change billing information for my annual subscription as the chart through which I was paying

The option that gives me my brand Subscription error and I can not make changes.

It solved the problem of changing the credit card for payment of a subcripción.
thanks
Date: Wed, 18 Jul 2012 14:22:59 -0600
From: [email protected]
To: [email protected]
Subject: How to change billing information for my annual subscription as the chart through which I was paying
    Re: How to change billing information for my annual subscription as the chart through which I was paying
    created by David__B in Adobe Creative Cloud - View the full discussion
Hi Beto, What information are you attempting to change (address, credit card)? What is the error message you are getting? Would it be possible to post a screen shot of the error? -Dave
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4565913#4565913
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4565913#4565913. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Creative Cloud by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How to change the Status CRTD of the Inspection Lot?

Dear all.
I want to Complete an Inspection Lot 10000000005 In the T-CODE qvm2.When I select the Inspection Lot 10000000005 and press F8 to Complete the Inspection,the SAP show an error message "Status check error".
And the detail info show that the error was cause by the Status CRTD of the Inspection Lot.I check the Status of the Inspection Lot 10000000005 and found that it's Status was CRTD CHCR SPRQ.My question was how to change the Status CRTD of the Inspection Lot?
Regard
Yoda

Hi
CRTD means ...
In material master QM vew-inspection setup->Inspect with task list tick is there.
Now to change status,
Go to Qp01>create a task list for material(If not exists)>remember date of creation of task list must be prior to date to creation of inspec lot
If task list is created/exists>go to QA02.<inspection specification -->click on Inspec Spec
and attach task list
go to sample tab....click on sample.
Now save it.
Status will change to REL
Regards
Sujit

How to I switch off / on the Status Time in the Airport Status menu

Good Day
I was wondering if anyone knows how to switch on / off the time that show in the Status menu of the Airport. I have a MacBook Pro with Mountain Lion that shows a connection time next to the Wifi, and this time is different to the system time which is correct.
The time doesn't make sense as the airport was disconnected at the time. Only Ethernet was used. But now connection the WiFi to a network doesn't change this time.
I just need to shed some light and I have tried System Preferences, going through the network, Time & Date, and various menus but I am not sure where to change this and the searches on the community seems to only bring "time" Capsule results..
Many thanks and looking forward to to see what you have
Waldo

sepefrancis wrote:
How to i change the language, is it possible?
No, it's not possible. You will have to acquire another copy of the book in your native language. If you can't find it in the iBookstore, try one of the other stores that also provide free ereader apps, like Kindle, Nook, Kobo, Googlebooks, or Sony.

Up next doesn't seem to work properly with multiple speakers over airplay. The status bar on the computer shows the song playing, but not over airplay. When I restart the song it plays, but the same thing happens when the next song cues up. Any ideas?

Up next doesn't seem to work properly with multiple speakers over airplay. The status bar on the computer shows the song playing, but not over airplay. When I restart the song it plays, but the same thing happens when the next song cues up. Any ideas?

Hey briannagrace96,
Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/ts1363
You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
Try the iPod troubleshooting assistant:
If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
Restart the iPod Service
Restart the Apple Mobile Device Service
Empty your Temp directory and restart
Verify that the Apple Mobile Device USB Driver is installed
Change your iPod's drive letter
Remove and reinstall iTunes
Disable conflicting System Services and Startup Items
Update, Reconfigure, Disable, or Remove Security Software
Deleting damaged or incorrect registry keys
Take care,
David

HT1386 When I try to sync my iphone with itunes, it tells me in a warning that I don't have enough memory and yet the status bar on the bottom says I do and I know that I have enough memory.What's as

When I try to sync my iphone with itunes, it tells me a warning that I don't have enough memory and yet the status bar at the bottom says that I do and I know that I have enough memory. What's the problem? It happens with the ipods and ipad as well!!!

The new iTunes has a somewhat different look from the previous version. You can get the old look back if you prefer it by doing View > Show Sidebar in iTunes. Or you can adapt to the new look.

When I view the summary of content on my iphone5, the status bar at the bottom to the iTunes window shows I have 3.90 Gb's of "other". What is that about and how can I free up that space?

when I view the summary of content on my iphone5, the status bar at the bottom to the iTunes window shows I have 3.90 Gb's of "other". What is that about and how can I free up that space?

I simply restored my iPhone from most recent iCloud backup. Poof. Good to go!!!

Need information for all the Fields on Infotype 94.

Hi all,
I have a question on Infotype 94 which holds all the information of I - 9 form. I would like to know which field goes with what details when we are trying to take details from I - 9 Form. I need a example how would it look for a Alien authorized worker and a permanent Resident and US citizen.
Please help me out in this issue.
Thank you.

Residence Status (Infotype 0094)
Definition
Infotype 0094 allows you to store information regarding an employeeu2019s residence status, as well as information regarding the compliance with the Immigration Reform and Control Act (IRCA), which requires every employer verify that each person hired can prove via documents their identity, and their eligibility for employment.
Structure
This infotype is divided into two parts: the personal identification information section (the residence permit) and the employment verification section (the work permit).
Personal identification
This section stores the information for personal identification. The only field which is required on this infotype is Residence status.
The ID type field describes the type of documentation the employee presents to the company. You can also enter data for the issuing authority.
The ID number is the number of the document provided by the employee to the company. The Issuing date is the date on which the personal identification document was issued to the employee. This date must be the same as or later than the employeeu2019s date of birth.
Lastly, the ID expiry date field is the date that the provided identification expires.
If the expiration date is filled, and there is a value of A (Alien) in theResidence status field, then this transaction will automatically generate a transaction to store a deadline for the expiration of the work permit (infotype 0019, subtype 71).
Employment verification
This section stores the information for employment verification. The Work permit field stores the type of work permit. The Work permit number field stores the number of the document provided by the employee to establish work eligibility.
The date issued and the issuing authority are also stored. The Expiry of work perm. field stores the date on which work eligibility expires. This field should only be filled for those employees who are not citizens
http://help.sap.com/erp2005_ehp_05/helpdata/EN/2c/8323d0571111d182d40000e829fbfe/frameset.htm

Need contact information for AT&T Office of the President/Escalation Department.

I require contact information for your Office of the President/Escalation Department. I am the victim of faulty phone service for a year and it needs to be escalated. My account should be credited for loss of service (landline/internet). Actually it may need to be forward to my state attorney general, because I think is purposely not being solved.

Actually, you can go to the corporate site and read the filings they make to the securities and exchange commision.Public Information, and all the bosses are named, with contact addresses.Just google it.. it's out there.

Need Information for Transferring the Object

Hy To every I need ur help plz tell whats is the wrong thing em doing.
I am sending a (MessageSerialize) Object Of org.jdesktop.jdic.desktop.Message through Socket problem is when i receive object the gets receive but the contents of objects doest not exists in the object which i have set before sending
Em pasting my code here please help me
**Server Code**_
* To change this template, choose Tools | Templates
* and open the template in the editor.
package com.communication.to.server;
import com.printing.utility.*;
import java.io.BufferedOutputStream;
import java.io.File;
import java.io.FileOutputStream;
import java.io.ObjectInputStream;
import java.io.ObjectOutputStream;
import java.net.ServerSocket;
import java.net.Socket;
import org.jdesktop.jdic.desktop.Desktop;
import org.jdesktop.jdic.desktop.Message;
* @author ABid
* @Description This class is used to recieve Data/Files throug Socket From Server
public class FileServer extends Thread {
private ServerSocket serverSocket;
public static void main(String argv[]) throws Exception {
new FileServer();
public FileServer() throws Exception {
serverSocket = new ServerSocket(4000);
System.out.println("Server listening on port 4000.");
this.start();
public void run() {
while (true) {
try {
System.out.println("Waiting for connections.");
Socket client = serverSocket.accept();
System.out.println("Accepted a connection from: " +
client.getInetAddress());
Connect c = new Connect(client);
} catch (Exception e) {
class Connect extends Thread {
private Socket client = null;
private ObjectInputStream ois = null;
private ObjectOutputStream oos = null;
public Connect() {
public Connect(Socket clientSocket) {
client = clientSocket;
try {
ois = new ObjectInputStream(client.getInputStream());
oos = new ObjectOutputStream(client.getOutputStream());
} catch (Exception e1) {
try {
client.close();
} catch (Exception e) {
System.out.println(e.getMessage());
return;
this.start();
public void run() {
try {
String workType = (String) ois.readObject();
if (workType.equalsIgnoreCase("Attachments")) {
String printDirectoy = "Attachments";
Message ms = new MessageSerialize();
ms = (MessageSerialize)ois.readObject();
Desktop.mail(ms);
ois.close();
oos.close();
client.close();
} catch (Exception e) {
e.printStackTrace();
client COde*_+
//This is code for sending Object
public static void sendMessageToMail() {
ObjectOutputStream oos = null;
ObjectInputStream ois = null;
//File file = new File("G://FileG.pdf");
try {
Socket socket = new Socket("localhost", 4000);
oos = new ObjectOutputStream(socket.getOutputStream());
ois = new ObjectInputStream(socket.getInputStream());
//byte[] mybytearray = new byte[(int) file.length()];
//FileInputStream fis = new FileInputStream(file);
//BufferedInputStream bis = new BufferedInputStream(fis);
//bis.read(mybytearray, 0, mybytearray.length);
System.out.println("Sending...");
oos.writeObject("Attachments"); // Type of Work here the String is used for Printing purpose
//oos.writeObject("HP Deskjet 3900 Series"); // Name of the printer
Message message = new MessageSerialize();
//ms.setMessage(message);
message.setBody("Hello");
List toAdd = new ArrayList();
toAdd.add("[email protected]");
List attachements = new ArrayList();
attachements.add("g://file.txt");
try {
message.setAttachments(attachements);
} catch (Exception exception) {
oos.writeObject(message);
//oos.writeObject(file.getName());//name of the file
//oos.write(mybytearray, 0, mybytearray.length); // file contents
//oos.writeObject(so);
oos.flush();
oos.close();
ois.close();
} catch (Exception exception) {
exception.printStackTrace();
"Serialized Object Class "
* To change this template, choose Tools | Templates
* and open the template in the editor.
package com.communication.to.server;
import java.io.IOException;
import java.io.*;
import java.io.Serializable;
import java.util.*;
import org.jdesktop.jdic.desktop.Message;
* @author ABid
public class MessageSerialize extends Message implements Serializable {
public MessageSerialize() {
Thanks in Advance
Abid

i made it like thisWhy?
You posted that code on 11/09/2008 20:02 and asked why it wouldn't work.
I told you why on 12/09/2008 08:48 (reply 2 of 8).
So now on 12/09/2008 16:59 (reply 7 of 8) you've tried it again.
Tell me why that wasn't just a complete waste of time.
but doesn't work again
Of course it 'doesn't work again.' It never did. It never will. Stop it. Why did you think it would work? After it didn't? After you started the thread to ask why? After I told you why?
This is just bizarre.
Now what will you say.Exactly what I said before. And I didn't say to extend Message. I told you why you can't do it that way.+
OK?
You have to construct a serializable class. You have to define the data you want serialized in that class. OK? In this case you want to transport data from a org.jdesktop.jdic.Message, so your new class will have to have the same fields and the same methods.
Isn't that obvious?
could you please mention i want to send files over network dont want to create them on disk through socket.This doesn't make sense either. You want files but you don't want them on the disk?
You'll have to explain yourself better than that if you want assistance here.

Need Information for the Status & usage in the routing

Similar Messages

Maybe you are looking for