Need information for which patch will be best on top of OWB 10.2.0.1

Hi ,
Can anybody tell us what are the options of patches for applying on top of
current Oracle warehouse Builder (OWB Client 10.2.0.1.31 ) and (OWB Repository 10.2.0.1.0.)
OS is windows 2003 server 64 bit
Server- HP Itanium with ram 8 gb
Also want upgrade OWB server on top of Client.
and can you suggest what should be best h/w config for this to handle more than 1 TB data in DWH.(2 gb/day)
from where we can Download it ?
Pl revert back to my mail id also [email protected]
Regards
-Umesh
Edited by: Umesh_owb on Aug 3, 2009 12:39 PM

Thanks Dear,
can we direct apply 10.2.0.5 on the top of 10.2.0.1 of owb ?
and can you share link from where we can download OWB 10g r2 server, coz need to convert our client of owb into server of owb then only need to apply patches.
So Pl .....
@ waiting for reply
Regards
Umesh

Similar Messages

Which camera will work best with the MAC? NIKON or Canon

Contemplating on buy a camera and a MAC, but need to know which camera will work best with a MAC, Nikon or Canon? Any info is appreciated

Both will work very well. You might not even need to install the software that comes with them because they'll probably work fine with iPhoto etc. Before you buy a camera, check this list of cameras supported by OS X:
http://support.apple.com/kb/HT3825
Just about all Nikon and Canon cameras are on that list. If a camera is so new it is not yet on that list, it will be in the next update, probably.
That list is for raw format compatibility. If your camera also shoots JPEG, it will work with a Mac even if it's not on that list. If a camera doesn't work by plugging in a cable, take the card out and put it in an ordinary USB card reader and the Mac will read it.
Nikon has a slight advantage in that it supports a mode that lets the Mac mount a camera like a disk on the desktop. Canons don't mount on the desktop, but it's not really a disadvantage, because Canons still work great with Apple iPhoto, Apple Aperture, Apple Image Capture, and Adobe apps, and all of those are more efficient ways of transferring photos than dragging them out manually.

Have a G400, OS10.4.11. Need 10.5 or later to install a new printer. Which one will run best? How do I upgrade?

Have a G400, OS10.4.11. Need 10.5 or later to install a new printer.
1) Which one will run best?
2) How do I upgrade?

It's probably cheaper to buy a new printer & sell the existing on on ebay.
I have the Cannon pixma mg3120 works fine for me with mac os x 10.4.11. I am able to refill the color ink jet cartridge. Press reset + color copy button for 10 seconds.
http://www.amazon.com/Canon-MG3120-Wireless-All-In-One-5289B019/dp/B005TI2Q8M
Mac OS® X v10.4.11 to v10.6.x
http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/photo_all _in_one_inkjet_printers/pixma_mg3120
What is a G400?
You may want to post machine info.
blue apple > about this mac > more info button. Click on the hardware line. It has a little triangle in front of the word hardware.
Leave out the serial number.
Example:
Machine Name: iMac
Machine Model: PowerMac4,1
CPU Type: PowerPC 750 (33.11)
Number Of CPUs: 1
CPU Speed: 600 MHz
L2 Cache (per CPU): 256 KB
Memory: 768 MB
Bus Speed: 100 MHz
Boot ROM Version: 4.1.9f1

I have photoshop and muse but need video editing which plan would be best for me.

I have photoshop and muse but need video editing which plan would be best for me.

Photography plan is $9.99 and each added program is $19.99 so do the math and decide if you want the entire plan
Cloud Plans https://creative.adobe.com/plans
-Special Photography Plan includes Photoshop & Lightroom & Bridge & Mobile Lightroom
-Special Photography Plan includes 2Gig of Cloud storage (not the 20Gig of the full plan)
-http://helpx.adobe.com/creative-cloud/faq/mobileapps.html
-http://helpx.adobe.com/photoshop/kb/differences-photoshop-creative-cloud-photography.html
-and subscription terms http://www.adobe.com/misc/subscription_terms.html
-what is in the entire Cloud http://www.adobe.com/creativecloud/catalog/desktop.html
-http://www.adobe.com/products/catalog/mobile._sl_id-contentfilter_sl_catalog_sl_mobiledevi ces.html

Hello,i have been finding problem to even open itunes.i know what have installed now is latest version and i could not open itunes in my laptop which resulted in big frustration.can anybody step in to help me for which i will be thankful to you.

Hello,i have been finding problem to even open itunes.i know what have installed now is latest version and i could not open itunes in my laptop which resulted in big frustration.can anybody step in to help me for which i will be thankful to you.when i double click itunes software,it never responds even with or without iphone 4s connection with my windows 7 laptop.

miraculous...i downloaded quicktime player from apple website and then i run it.upon double click on this quick time player and then i double clicked on itunes...there comes an enry of itunes software...now i am completely enjoying my musics.photos in smart phone.
Thanks a Lot

Which dock will work best - attach to this bracket in my car?

Which dock will work best - attach to this bracket in my car?
Here is a pic of the bracket. I haven't figured out how to post pictures here yet.
http://tinypic.com/r/9q8qw1/3

Btw, it's an iPhone 3GS.

Anyone else experience the contact information for a blocked contact appearing at the top of the screen, when you open your email?

Has anyone else experienced contact information for a blocked contact, appearing at the top of your email screen when opening your email?

I'm seeing this as well, but not everytime only evry so often. No idea why.

Need information for all the Fields on Infotype 94.

Hi all,
I have a question on Infotype 94 which holds all the information of I - 9 form. I would like to know which field goes with what details when we are trying to take details from I - 9 Form. I need a example how would it look for a Alien authorized worker and a permanent Resident and US citizen.
Please help me out in this issue.
Thank you.

Residence Status (Infotype 0094)
Definition
Infotype 0094 allows you to store information regarding an employeeu2019s residence status, as well as information regarding the compliance with the Immigration Reform and Control Act (IRCA), which requires every employer verify that each person hired can prove via documents their identity, and their eligibility for employment.
Structure
This infotype is divided into two parts: the personal identification information section (the residence permit) and the employment verification section (the work permit).
Personal identification
This section stores the information for personal identification. The only field which is required on this infotype is Residence status.
The ID type field describes the type of documentation the employee presents to the company. You can also enter data for the issuing authority.
The ID number is the number of the document provided by the employee to the company. The Issuing date is the date on which the personal identification document was issued to the employee. This date must be the same as or later than the employeeu2019s date of birth.
Lastly, the ID expiry date field is the date that the provided identification expires.
If the expiration date is filled, and there is a value of A (Alien) in theResidence status field, then this transaction will automatically generate a transaction to store a deadline for the expiration of the work permit (infotype 0019, subtype 71).
Employment verification
This section stores the information for employment verification. The Work permit field stores the type of work permit. The Work permit number field stores the number of the document provided by the employee to establish work eligibility.
The date issued and the issuing authority are also stored. The Expiry of work perm. field stores the date on which work eligibility expires. This field should only be filled for those employees who are not citizens
http://help.sap.com/erp2005_ehp_05/helpdata/EN/2c/8323d0571111d182d40000e829fbfe/frameset.htm

Which accessory will work best?

I posted on here less than a month ago asking about the 30-pin to lightning adapter for the iPhone 5, seeing if it would work with my '08 Volkswagen Jettas iPod Adapter. Sadly to say, I should have listened to my gut feeling (but I appreciate the effort in trying to help) that it didn't work. I was looking around on the Google machine here, and found through a forum these things from CableJive. THey didn't say if they worked or not and I was wondering if anybody had any ideas if they do or not? Or if they think it would work?
http://www.cablejive.com/products/dockBoss.html
http://www.cablejive.com/products/dockBoss-air.html
http://www.cablejive.com/products/dockBossplus-for-iPhone-5.html
Anyone have any tries with these things at all? THink it would work (although it does say it)? Just want to be sure this time. If you do, which would be the best buy?
Thanks Community!
Kyle

I hope this reaches you in time. Turns out none of Cablejive's solutions will work with VW's built in ipod adapter. Take a look at this link: http://www.cablejive.com/forum/viewtopic.php?f=38&t=7467

Need Information For Connecting Access point to WLC 4402

Hi Friends
I need Some information for Connecting my New Access point ( Cisco AIRLAP 1242AG) with WLC(4402) Controller
In our network set up we have two WLC(4402) we needs to Connect this New Accesspoint To one of our WLC
My Access point is brand New. I need to Know what all i have to do inorder to connect this AP to the controller (from Acesspoint perspective & WLC perspective)
I need to Know what I need to do in AP to connect to the Controller
Do i need to Assign Static IP Address forAP or after connecting to the switch it automatically gets ip from DHCP and regsiter with controller??
Do i Need to Configure my AP with default gateway(the switch to which is connected ?) & DO i need to configure the AP with Controller Ip address ??
Pls Assist
Regards
Safwan

Hi Scot...
We tried Connecting the Access Point yesterday, but it failed....
We are using Cisco 3500 Access point ...
when we connected , first it automatically got an ip address using DHCP but following error occurred
P70ca.9bd5.77c6#
AP70ca.9bd5.77c6#
AP70ca.9bd5.77c6#
Not in Bound state.
*Mar 1 00:13:56.539: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination
*Mar 1 00:13:56.555: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigne
d DHCP address 10.50.11.26, mask 255.255.0.0, hostname AP70ca.9bd5.77c6
*Mar 1 00:14:04.564: %CAPWAP-3-UNSUPPORTED_WLC_VERSION: Unsupported version 6.0
.182.0 on WLC USSTLController01
*Mar 1 00:14:14.564: %CAPWAP-3-UNSUPPORTED_WLC_VERSION: Unsupported version 6.0
.182.0 on WLC USSTLController01
*Mar 1 00:14:24.564: %CAPWAP-3-UNSUPPORTED_WLC_VERSION: Unsupported
version 6.0
.182.0
version 6.0
.182.0
on WLC USSTLController01
version 6.0
.182.0
Then I COnfigured Ap with Static ip address & default gateway & controller Ip but tht too didnt work...
.182.0 on WLC USSTLController01
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>
*Mar 1 00:13:40.908: %CDP_PD-2-POWER_LOW: All radios disabled - NEGOTIATED WS-C
3750X-48P (e05f.b907.9a20)
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>en
Password:
AP70ca.9bd5.77c6#
*Mar 1 00:13:48.033: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP
. Renewing DHCP IP.
AP70ca.9bd5.77c6#
AP70ca.9bd5.77c6#
AP70ca.9bd5.77c6#
P70ca.9bd5.77c6>
*Mar 1 00:13:40.908: %CDP_PD-2-POWER_LOW: All radios disabled - NEGOTIATED WS-C
3750X-48P (e05f.b907.9a20)
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>en
Password:
AP70ca.9bd5.77c6#
*Mar 1 00:13:48.033: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP
. Renewing DHCP IP.
I also Need to Know Cisco Access point 3500 can be associated with WLC 4402 ( version 6.0.182.0) ??
Pls Advice How to proceed further

Hey all, i have an old iphone 3G and would like to get it up and running for my wife... thoughts/suggestions about which iOS will work best/at all?

help

OK, try this: First make sure that all anti-virus software & any firewalls are completely turned off...nothing running. Then do the following:
Turn your phone off...in your case, it's already off, so proceed: Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

Need information for file type conversion from Oracle

Hi,
I need a scenario where there is third party tool which supports file types (.lnb (Link Notebook Chart),.anb(Analyst Notebook Analytical Chart),.anx(Analyst Notebook Exchange Chart),.tcv(Text Chart Visualisation))
I am having a Oracle database where I want to create a file from a Table so that the third party tool could understand
the file supported types.
Any help will be benefitial for me
Thanks and Regards

Hi,
If I use as:
DECLARE
fileHandler UTL_FILE.FILE_TYPE;
BEGIN
fileHandler := UTL_FILE.FOPEN('test_dir', 'test_file.tcv', 'W');
UTL_FILE.PUTF(fileHandler, 'Writing TO a file\n');
UTL_FILE.FCLOSE(fileHandler);
EXCEPTION
WHEN utl_file.invalid_path THEN
raise_application_error(-20000, 'ERROR: Invalid PATH FOR file.');
END;
If I use the file naming convention i.e extension type as .tcv will it support ?
Thanks and Regards

Need Information for Transferring the Object

Hy To every I need ur help plz tell whats is the wrong thing em doing.
I am sending a (MessageSerialize) Object Of org.jdesktop.jdic.desktop.Message through Socket problem is when i receive object the gets receive but the contents of objects doest not exists in the object which i have set before sending
Em pasting my code here please help me
**Server Code**_
* To change this template, choose Tools | Templates
* and open the template in the editor.
package com.communication.to.server;
import com.printing.utility.*;
import java.io.BufferedOutputStream;
import java.io.File;
import java.io.FileOutputStream;
import java.io.ObjectInputStream;
import java.io.ObjectOutputStream;
import java.net.ServerSocket;
import java.net.Socket;
import org.jdesktop.jdic.desktop.Desktop;
import org.jdesktop.jdic.desktop.Message;
* @author ABid
* @Description This class is used to recieve Data/Files throug Socket From Server
public class FileServer extends Thread {
private ServerSocket serverSocket;
public static void main(String argv[]) throws Exception {
new FileServer();
public FileServer() throws Exception {
serverSocket = new ServerSocket(4000);
System.out.println("Server listening on port 4000.");
this.start();
public void run() {
while (true) {
try {
System.out.println("Waiting for connections.");
Socket client = serverSocket.accept();
System.out.println("Accepted a connection from: " +
client.getInetAddress());
Connect c = new Connect(client);
} catch (Exception e) {
class Connect extends Thread {
private Socket client = null;
private ObjectInputStream ois = null;
private ObjectOutputStream oos = null;
public Connect() {
public Connect(Socket clientSocket) {
client = clientSocket;
try {
ois = new ObjectInputStream(client.getInputStream());
oos = new ObjectOutputStream(client.getOutputStream());
} catch (Exception e1) {
try {
client.close();
} catch (Exception e) {
System.out.println(e.getMessage());
return;
this.start();
public void run() {
try {
String workType = (String) ois.readObject();
if (workType.equalsIgnoreCase("Attachments")) {
String printDirectoy = "Attachments";
Message ms = new MessageSerialize();
ms = (MessageSerialize)ois.readObject();
Desktop.mail(ms);
ois.close();
oos.close();
client.close();
} catch (Exception e) {
e.printStackTrace();
client COde*_+
//This is code for sending Object
public static void sendMessageToMail() {
ObjectOutputStream oos = null;
ObjectInputStream ois = null;
//File file = new File("G://FileG.pdf");
try {
Socket socket = new Socket("localhost", 4000);
oos = new ObjectOutputStream(socket.getOutputStream());
ois = new ObjectInputStream(socket.getInputStream());
//byte[] mybytearray = new byte[(int) file.length()];
//FileInputStream fis = new FileInputStream(file);
//BufferedInputStream bis = new BufferedInputStream(fis);
//bis.read(mybytearray, 0, mybytearray.length);
System.out.println("Sending...");
oos.writeObject("Attachments"); // Type of Work here the String is used for Printing purpose
//oos.writeObject("HP Deskjet 3900 Series"); // Name of the printer
Message message = new MessageSerialize();
//ms.setMessage(message);
message.setBody("Hello");
List toAdd = new ArrayList();
toAdd.add("[email protected]");
List attachements = new ArrayList();
attachements.add("g://file.txt");
try {
message.setAttachments(attachements);
} catch (Exception exception) {
oos.writeObject(message);
//oos.writeObject(file.getName());//name of the file
//oos.write(mybytearray, 0, mybytearray.length); // file contents
//oos.writeObject(so);
oos.flush();
oos.close();
ois.close();
} catch (Exception exception) {
exception.printStackTrace();
"Serialized Object Class "
* To change this template, choose Tools | Templates
* and open the template in the editor.
package com.communication.to.server;
import java.io.IOException;
import java.io.*;
import java.io.Serializable;
import java.util.*;
import org.jdesktop.jdic.desktop.Message;
* @author ABid
public class MessageSerialize extends Message implements Serializable {
public MessageSerialize() {
Thanks in Advance
Abid

i made it like thisWhy?
You posted that code on 11/09/2008 20:02 and asked why it wouldn't work.
I told you why on 12/09/2008 08:48 (reply 2 of 8).
So now on 12/09/2008 16:59 (reply 7 of 8) you've tried it again.
Tell me why that wasn't just a complete waste of time.
but doesn't work again
Of course it 'doesn't work again.' It never did. It never will. Stop it. Why did you think it would work? After it didn't? After you started the thread to ask why? After I told you why?
This is just bizarre.
Now what will you say.Exactly what I said before. And I didn't say to extend Message. I told you why you can't do it that way.+
OK?
You have to construct a serializable class. You have to define the data you want serialized in that class. OK? In this case you want to transport data from a org.jdesktop.jdic.Message, so your new class will have to have the same fields and the same methods.
Isn't that obvious?
could you please mention i want to send files over network dont want to create them on disk through socket.This doesn't make sense either. You want files but you don't want them on the disk?
You'll have to explain yourself better than that if you want assistance here.

Need information for icloud or streaming

wath is the form for eraser information in iclud or estreaming

The iCloud provides a backup copy, which you can "redownload" if you need a new copy. It does not provide streaming.
You may be confusing it with the Amazon cloud service, which provides both backup and streaming, i.e. you can either download the music or play it directly from the cloud.

Need Information for the Status & usage in the routing

HI all,
I need some inforamation , what is impact if i will use in the routing , usage 1- Production & 4 -- released general & Suppose i will use universal 3 & 4 released general . What will be impact .
Regrads
satish

Hi Satish ,
Task list type usage Key specifies the areas in which the task list can be used (for Example, in production or plant Maintenance).
Status: You use the status key to indicate the processing status of a task list. For example, you can indicate whether the task list is still in the creation phase or has already been released.
Dependencies: Note that certain transactions are dependent upon the status of the task list. For example, you can only include a reference operation set in a routing if the routing has the status "Released (general)".
Case 1: If you use
Usage 1 - Production     If you use the usage key as 1 that means that the task list can only be used in Production if the status is released only.
Status 4 - Released (General)
Case 2 :
If you use
Usage - 3   Universal   which means that the routing can be used in the Production , Engg/ Design, Plant maintenance areas etc if the status is released only.
Status - 4 Released(General)
Hope it is useful for you.
Thanks
Srinivas

Need information for which patch will be best on top of OWB 10.2.0.1

Similar Messages

Maybe you are looking for