Need information of Configuration Nodes

Hi Experts,
I am in need of information related to the configurable nodes those are related to Implementation of OM,PA,TM and PY.
As i have to work on Solution Manager for configration I have to find all the necessary nodes and copy them to Solman.
So I need information on the above to go further.
Please provide your valuable inputs on this.
Thanks in advance..........
Cheers,
Raj

Hi,
Go to SPRO
You will see Personnel Management, Personnel Time Management and Payroll nodes.
They will have sub nodes.
Hope this helps
Ajay

Similar Messages

More information on configuring node connections.

In the Netscape Calendar Server Admin Guide chapter on Managing a Node
Network, there is not sufficient information on configuring SNC connections.
The example provided shows "all:2" with no information on why 2 is a good number
for the example case. Other examples demonstrate increasing the number of connections
for specific nodes with no information on when this is appropriate.

We have configured our network with all:2, but we need documentation that details
how this number should be determined.

Two connections is the minimum in cases where there is one
node configured on each server. The unicwsd requires one connection for processing
of remote node requests and there should be at least one additional connection available
to be used by the clients.

Depending on how much traffic there is between nodes, two connections
might not be sufficient. The 'uninode -snc all' output should give you an
idea if there are not enough connections configured. An example of the output
follows:

uninode: connected to server1, node 10000
 Last reset: 29/6/99 13:00:51
PST8PDT
 ----------------------------------------------------------------------------
 CONNECTION
EX CO AV US LOST RETRY QUEUE CANCEL CHECK GRANTED
 ----------------------------------------------------------------------------
 (10000)->server2(10001) 2
2 2 0
1
0
0
0
36
 (10000)->server3(10002) 2
2 2 1
0
0
0
5
126
 (10000)->server4(10003) 2
2 2 2
0
1 91
805
22
 (10000)->server5(10004) 2
2 2 0
0
0
0
0
181
 ----------------------------------------------------------------------------
In the example above, there are not enough connections available from
server1 to server4. "US" indicates that there were two connections
used at the time the uninode -snc all was run. "QUEUE" indicates that
there is one unieng process currently waiting for a free connection. "CANCEL"
means that there were x number of processes that did not get a connection, and
"CHECK" indicates the number of times a process had to retry before the request
for an snc connection was either granted or canceled. LOST, QUEUE,
CANCEL, CHECK and GRANTED are values that are reset when the unisncd
is shut down, or when 'uninode -reset' is run.

Note: In cases where there is more than
one node configured on one server, the node connections on that server going to the
other nodes are pooled. That means that any process on that server could use any snc
connection going to a node. In these cases the number of connections
configured could even be as low as all:1. Again, this depends on usage,
and might be subject to fine-tuning.

Hi,
you have to enable this additional measurements by executing
x_cons <dbname> time enable
Kind regards
Holger

Need Information to Configure MIbs in 5508 Controllers

Hi All,
I Need to Know few informations about Mibs, we are onboarding devices to HP NNM Tool for monitoring purposes. we have 10 wireless controllers.. We need to enable following traps for AP to pull from tool.
for the below traps to be enabled what are all the traps have to be enabled in controller ?? we have 4400 & 5500 series controllers.
I seen WLC -> SNMP -> trap control , lots of option, i need to clarify 2 thigs
1) whether this is the place ( WLC->SNMP->Trap control) where we need to enable traps for the below Alerts.
2) if so, what are all the options need to be enabled for Below traps in (general/Ap/CLient/Security/Auto RF/Mesh)
Waiting for your inputs
SN
Trap
Oid
Sev
Trap Type
1
APAssociated
.1.3.6.1.4.1.14179.2.6.3.7
Normal
Access point Traps
2
APCoverageProfileFailed
.1.3.6.1.4.1.14179.2.6.3.14
Major
Access point Traps
3
APDisassociated
.1.3.6.1.4.1.14179.2.6.3.8
Major
Access point Traps
4
APDown
.1.3.6.1.4.1.14179.2.6.3.6
Critical
Access point Traps
5
APIfDown
.1.3.6.1.4.1.14179.2.6.3.10
Major
Access point Traps
6
APIfUp
.1.3.6.1.4.1.14179.2.6.3.9
Normal
Access point Traps
7
APInterferenceProfileFailed
.1.3.6.1.4.1.14179.2.6.3.13
Major
Access point Traps
8
APLoadProfileFailed
.1.3.6.1.4.1.14179.2.6.3.11
Major
Access point Traps
9
APLoadProfileUpdatedToPass
.1.3.6.1.4.1.14179.2.6.3.37
Normal
Access point Traps
10
APNoiseProfileFailed
.1.3.6.1.4.1.14179.2.6.3.12
Major
Access point Traps
11
APRadioCardRxFailure
.1.3.6.1.4.1.14179.2.6.3.73
Major
Access point Traps
12
APRadioCardRxFailureClear
.1.3.6.1.4.1.14179.2.6.3.74
Normal
Access point Traps
13
APRadioCardTxFailure
.1.3.6.1.4.1.14179.2.6.3.71
Major
Access point Traps
14
APRadioCardTxFailureClear
.1.3.6.1.4.1.14179.2.6.3.72
Normal
Access point Traps
15
APUp
.1.3.6.1.4.1.14179.2.6.3.5
Normal
Access point Traps
16
ApHasNoRadioCards
.1.3.6.1.4.1.14179.2.6.3.60
Major
Access point Traps
17
SensedTemperatureTooHigh
.1.3.6.1.4.1.14179.2.6.3.43
Critical
Access point Traps
18
SensedTemperatureTooLow
.1.3.6.1.4.1.14179.2.6.3.44
Critical
Access point Traps
19
TemperatureSensorFailure
.1.3.6.1.4.1.14179.2.6.3.45
Critical
Access point Traps

I can tell you one thing cause your question is kind of crypto to me.
You can download the whole mib file for the current image running on your controller from the download software section on cisco site.
Also you can use the SNMP Object navigator on cisco site to look for whatever you want.
And if it is urgent open TAC case cause we are responding on best effort.
Please make sure to rate correct answer

I need information about Web dynpro ABAP Exception : ICF Service Node

I need information about Web dynpro ABAP Exception :
ICF Service Node "/sap/bc/webdynpro/sap/abcd/undefined" does not exist.
Here abcd is application name.
ICF Service Node exists and activated but kindly let me know from where "undefined" is coming .
Please let me know your comments /views about this.

Hi,
I think ur webdynpro service is not active after upgradation.
You have manually activate it.
Go go Tcode SICF,Execute the Initial screen,
and in this new screen give service as your application name and click on filter.
You will get your service below which will be ur application name .
right-Click on the deactivate and activate it or just activate it,.
This shd work

Need information about SAP EM Configuration and Implementation

Hi,
I am new to SAP EM.I need to do Configuration for EM and Procurement visibility process.
Please provide some information on configuration of EM with examples.
Thanks,
Prasuna.

Hi
There is wealth of information available on the [Service Marketplace |https://websmp107.sap-ag.de/scm]on the standard visibility scenarios which will probably get you started. Procurement visibility scenario is one of the them and have documentations.
There are couple of points which are worth knowing that SAP Event Management
- requires configuration in both application system (ECC) and SAP EM system (SCM)
- good understanding of the function module (extractors) for sending and posting events
- well thought supply chain events (design) business would like to monitor and manage
- reactions to both expected and unexpected events (follow-up activities)
The other resource available are [SAP PRESS technical book |http://www.sap-press.com/products/Implementing-and-Configuring-SAP-Event-Management.html] and [published case studies |http://www.scmexpertonline.com/article.cfm?session=&id=4804] on the SAP EM Procurement visibility scenario.
Cheers
Sandeep Pradhan

Hi what all need to be configured in BSI by SAP HR

Hi Gurus,
Please provied me information about BSI.
what need to be configured in BSI by the SAP Hr functional consutant.

What about port 22/tcp? RAC fails to install if it does not have ssh access from one cluster node to all other cluster nodes.
And firewall which network? Public or private? It would be a mistake to firewall the private (Interconnect) network - but something that could be inevitable when the Interconnect is not a truly dedicated and private network to server as the cluster's communication backbone.
What about OEM?
What about Apex, XDB and webdav?
There are a number of network services related to Oracle and one needs to make a comprehensive listing of what is used (and on which ports) for correctly configuring the firewall.

How to configure Node manager on Linux on ssl port

Hi,
I have installed SOA BPM 11.1.1.3 on linux with ssl enabled. I am trying to configure Node Manager but it's not working.
Here are the steps I did to configure.
1. Created a machine
2. Added managed servers to the machine i.e. soa,bam
3. Enroll domain using nmEnroll using
cd $BEA_HOME/user_projects/domains/<domain_name>/bin/
. setDomainEnv.sh
java weblogic.WLST
wls> connect(’weblogic’,'weblogic1’, ‘t3://mymachine.mydomain:7001’)
wls> nmEnroll(’$BEA_HOME/user_projects/domains/<domain_name>’, ‘$BEA_HOME/wlserver_<version>/common/nodemanager’)
here 7001 is the admin server non-ssl port but when I try 7002 ssl port it doesn't connect. But I need to enroll it on ssl port as I have ssl enabled.
4. reset the node manager user/password same as weblogic console
5. started the node manager using $WL_HOME\server\bin\startNodeManager.sh
But when I log back into console and try to start my manage server it gives the following error
SEVERE: java.io.FileNotFoundException: /usr3/app/oracle/Middleware/user_projects/domains/wcbpm_domain/./config/jps-config.xml (No such file or directory)
<Aug 6, 2010 5:30:16 PM EDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The dynamic loading of the OPSS java security policy provider class oracle.security.jps.internal.policystore.JavaPolicyProvider failed due to problem inside OPSS java security policy provider. Exception was thrown when loading or setting the JPSS policy provider. Enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-01538: The default policy provider was not found.I did not add my Admin server to be part of the machine.
Any help if I am missing anything or doing anything wrong.
Thanks

Hi,
Do I need to add Admin Server also part of the Machine where I added bam,soa servers. I tried again following the steps but gets the below error again. Appreciate if someone can list the steps as the docs are a bit vague:
<Aug 6, 2010 6:14:01 PM> <INFO> <wcbpm_domain> <bam_server1> <Starting WebLogic server with command line: /usr3/app/oracle/Middleware/user_projects/domains/wcbpm_domain/bin/startWebLogic.sh >
Aug 6, 2010 6:14:01 PM weblogic.nodemanager.server.ServerManager log
INFO: Starting WebLogic server with command line: /usr3/app/oracle/Middleware/user_projects/domains/wcbpm_domain/bin/startWebLogic.sh
<Aug 6, 2010 6:14:01 PM> <INFO> <wcbpm_domain> <bam_server1> <Working directory is '/usr3/app/oracle/Middleware/user_projects/domains/wcbpm_domain'>
Aug 6, 2010 6:14:01 PM weblogic.nodemanager.server.ServerManager log
'/usr3/app/oracle/Middleware/user_projects/domains/wcbpm_domain/servers/bam_server1/logs/bam_server1.out'
<Aug 6, 2010 6:14:02 PM> <INFO> <wcbpm_domain> <bam_server1> <Server failed during startup so will not be restarted>
Aug 6, 2010 6:14:02 PM weblogic.nodemanager.server.ServerManager log
INFO: Server failed during startup so will not be restarted
<Aug 6, 2010 6:14:02 PM> <WARNING> <Exception while starting server 'bam_server1'>
java.io.IOException: Server failed to start up. See server output log for more details.
 at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
 at weblogic.nodemanager.server.Handler.handleStart(Handler.java:567)
 at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
 at weblogic.nodemanager.server.Handler.run(Handler.java:70)
 at java.lang.Thread.run(Thread.java:619)
[WARN ] Use of -Djrockit.optfile is deprecated and discouraged.
[WARN ] Use of -Djrockit.optfile is deprecated and discouraged.
Unknown option or illegal argument: -XX:+UseParallelGC.
Please check for incorrect spelling or review documentation of startup options.
Could not create the Java virtual machine.
<Aug 6, 2010 6:14:02 PM> <FINEST> <NodeManager> <Waiting for the process to die: 590>
<Aug 6, 2010 6:14:02 PM> <INFO> <NodeManager> <Server failed during startup so will not be restarted>
<Aug 6, 2010 6:14:02 PM> <FINEST> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>Don't know if I hve missed any steps in node manager configuration.
Thanks

I need information about personal experience with DFS-R: shortcomings and limitaions of DFS-R

Hello,
We plan to install DFS-R in our organization.
I need information about personal experience with DFS-R: shortcomings and limitations of DFS-R.
Thank you for any info.

Hi,
You could refer to the articles below to see some limits about DFSR and some DFSR configuration mistakes which will cause DFSR problems:
Understanding DFS Replication "limits"
http://blogs.technet.com/b/filecab/archive/2005/12/12/understanding-dfs-replication-_2200_limits_2200_.aspx
Common DFSR Configuration Mistakes and Oversights
http://blogs.technet.com/b/askds/archive/2010/11/01/common-dfsr-configuration-mistakes-and-oversights.aspx
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Needs to be configured for Windows... but it already is!

I just bought a brand new 80GB iPod Classic today. I hooked it up to my laptop's USB port, and the first time it showed up in my iTunes directory. Unfortunately iTunes informed that my iPod was corrupted, so I restored it. This happened TWICE.
The third time I hooked it up, the iPod didn't show up in the directory, but a pop-box appeared telling me that the iPod needed to be configured for Windows, and would I like to configure now? I clicked yes, and nothing happened. Once I checked the iPod, I saw that the Version was 1.0.2. PC.
Any ideas how to get my iPod up and running? Thanks in advance.
iTunes version: 7.4.3.1.
iPod version: 1.0.2. PC

You need to connect your phone to iTunes on your COMPUTER, not on your phone.

Unable to load new information from configuration file /var/ldap/ldap_clien

Hi all,
When I run the command "ldapclient init", I got the error message:
# ldapclient init -a proxyDN=cn=proxyagent,ou=profile,dc=example,dc=ca -a domainName=example.ca -a profileName=UserProfile -a proxyPassword=pwd 10.1.10.50
Unable to load new information from configuration file '/var/ldap/ldap_client_file' ('Unable to open filename '/var/ldap/ldap_client_file' for reading (errno=2).').
Any idea?
Thanks a lot for your help!

Does the profile UserProfile exist on your LDAP server?
Do the logs on your LDAP server show access problems?
Try using -v to get more verbose output

A wallet needs to be configured for this instance of Application Express

hi
I m very new to APEX. I could create web service client with wsdl. But when service is on https i get message
"a wallet needs to be configured for this instance of Application Express".
I have created wallet using OWM (10.2.0.1.0) at location c:\del_sometime
Using admin i configured APEX instance settings wallet as
Wallet Path = file:c:\del_sometime
And checked in database too
SQL> ALTER SESSION SET CURRENT_SCHEMA = APEX_030200;
Session altered.
SQL> SELECT
2 APEX_INSTANCE_ADMIN.GET_PARAMETER('WALLET_PATH')
3 from dual;
APEX_INSTANCE_ADMIN.GET_PARAMETER('WALLET_PATH')
file:c:\del_sometime
Any idea whats wrong? I am following steps from http://download.oracle.com/docs/cd/E14373_01/admin.32/e13371/adm_wrkspc.htm#BABFBJEA

also whe I try following i keep getting error failure to open file. I am on XP and file is present with proper permissions.
SQL> SELECT utl_http.request('https://support.oracle.com/',null,'file:c:\del_sometime\') from dual;
SELECT utl_http.request('https://support.oracle.com/',null,'file:c:\del_sometime\') from dual
ERROR at line 1:
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1577
ORA-28759: failure to open file
ORA-06512: at line 1

In what order what components needed to be configured in ODI?

I will be migrating data from TXT files to Oracle 10g.
In what order what components/objects (e.g. Project, Models, topology, data store, metadata, schema etc) needed to be configured in ODI?
This will help me go through ODI manual in a logical order.

Hi,
Have a look as a kick off,
http://www.oracle.com/technology/obe/fusion_middleware/odi/ODIproject_flatfile-to-table/ODIproject_flatfile-to-table.htm
Thanks,
Guru

I need Information about Grid

Hello,
The first, i don't speak english very well.... ;)
the company for which work has 3 seats now, but is going to open 5 more.
All these seats are small, and the cost to install Oracle in each one of them is very elevated.
i would like to know to me if Grid Computing can help me centralizing everything in a Seat. The scalability is something very important. and i need have several instances of BD oracle up...
I need information...
Yo can write me to [email protected]
Thanks in advance

Hi.
By seat, I assume you mean site or location.
It's difficult to answer this type of question as it depends on so many factors. Personally, I would always go for the centralized solution. This way you don't need to worry about replication or distribution of data. Those things are always a nightmare.
RAC is great for high availability, and it will allow you to increase your horsepower as and when you need it, but you still need to consider your performance erquierments up front.
Of course, centralization comes with it's own set of problems. Are you going to connect to the central server via the web, VPN, leased line? What happens when the connection is unavailable?
There is just so much to consider...
Cheers
Tim...

I need information about reports

hi gurus,
i need information about Trending reports and Management reports. Can any body provide me the scenario regarding this issues:

Hi
Trend reports are the reports which show a certain trend all over the years
Say, Sales revenue for the year compared to all the previous years...This show what is the trend in the last few years
Management reports high level reports with summarized data which helps in decision making. Say, Vendor performance report...this report shows list of default vendors by ranking them and management can decide to continue or not to continue with certain vendors
Regards
N Ganesh

I need information regarding the creation of Workbook and WAD.

Hi,
I need information regarding the How to create the Workbook and WAD.
Can any one help me to get the information..
Regards,
Suman
Edited by: Suman Reddy Vuyyuru on May 19, 2009 8:22 AM

Hi,
for workbook:
[Queries in Workbook|http://help.sap.com/saphelp_sem40bw/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm]
for WAD:
[WAD for Beginners|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22]
thnks.

Need information of Configuration Nodes

Similar Messages

Maybe you are looking for