Need information on adobe tool

Hi,
We are evaluvating a tool to convert word document to pdf for our prestegious client.
Below are requirements,
Requirement 1:
Source- MS Word document
Target- PDF
1) Conversion of MS Word document to PDF through online. Here Word document content don't follow any specific layout disagn.
User wants pdf format should be as same as Word document including font, file layout, header, footer.
2) Target Pdf should dynamically generate content while reading word document. i.e it has to replace <placeholders> with the data read from DB.
3) Target Pdf should also merge some other pdf documents during conversion
Requirement 2:
Source- PDF
Target- PDF
1) User will provide PDF which has user data aswell as <placeholders>. We need to replace the <placeholders> with the data read from DB & generate PDF.
Please let us know which adobe tool would suite better for above said requirements.
Note: From my initial analysis I found 'LiveCycle PDF Generator ES ' and 'LiveCycle Output ES2' are suitable to 'Requirement 1'. Please let me know your comments on this.
Thanks,
Kumaresh
9886190109

Hi chek this
Distributing Master Data Using the SMD Tool
http://help.sap.com/saphelp_nw04/helpdata/en/78/2178da51ce11d189570000e829fbbd/content.htm
Award if helpful.

Similar Messages

Need Information on SMD tool

Hello SAP Guru's,
                           Need information about Share Master Data(SMD) tool.
                           1) What is SMD tool?
                           2) What for SMD toll used?
                           3) How to use SMD tool, for change pointer in ALE(Application Link Enabling) ?
                           4) How to configer SMD tool?
Give the needfull solution to solve the issues.
Regards,
Sateesh J

Hi chek this
Distributing Master Data Using the SMD Tool
http://help.sap.com/saphelp_nw04/helpdata/en/78/2178da51ce11d189570000e829fbbd/content.htm
Award if helpful.

I need information on Adobe Flash Player

Lately, when I try to use sites I have used before, I get the message to Upgrade to Adobe Flash Player. I thought I already had that and I can't seem to install it. Is it free? Can someone help me?

Could you please see the information in the following link? http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.html#Flash_P layer_for_Safari
I suspect Flash Player is downloaded in your computer. Ideally it should be there in your Download folder. You need to install it by following the steps mentioned in the above link.
Also, ensure that Plug-ins and JavaScript are enabled in Safari. (Go to Preference in Safari and see if they are enabled.)
Thanks,
Sunil

Need information about Adobe Flex and WD

Hello SDN!
We try to decide is it possible to use Adobe Flex with WD java for us. So I need to know information like:
1) hardware requirements
2) software requirements (e.g. which versions of SAP NetWeaver are supported, which IDEs are supported and so on)
3) what about licenses - is it free or it necessary to buy it?
4) Adobe Flex and Adobe Flash are the same things or not
5) any other useful information
regards, Lev

Hi Tarun,
You can follow these links for more information
http://help.sap.com/saphelp_nwce711/helpdata/en/48/825afcf53d3ff6e10000000a42189c/content.htm
http://www.adobe.com/devnet/sap/articles/understanding_richislands.html
Hope it helps.
Regards
Uday

I need information on how Adobe Drive works and how to set it up

Hey folks,
believe it or not, but I have been searching a lot on the web already on how to find information how Adobe Drive works and how to set it up.
Most information that I found is old and seems to be valid only for older versions of Creative suite. Here in the company we use CS5.5 and will switch to CS6 soon.
I already downloaded Adobe Drive 3 and installed it on my Mac. Unfortunately I don't know what to do next? Do I need Adobe CQ to make it work? Or can I use it with an existing SVN infrastructure, that we have here? Actually I would like to access the SVN via Adobe Bridge. But after the installation of Adobe Drive my Bridge CS5.5 is crashing while starting up, and I didn't find out how to fix this again.
Actually I just found the manual for Adobe Drive 3 and read it. Seems to be easy in case its working. But it's not in my case, as mentioned above.
Any idea what could be the problem?

Thanks,
in the meantime I managed to re-setup Adobe Drive 3 again. Bridge CS5.1 is still crashing (i have a log-file with a detailed error-report, if somebody knows how to extract information from this.
At least now I can start Drive as a standalone application.
So now my main question is how to connect Drive 3 to our subversion infrastructure in the company. Does anybody have information on this?

How to create a pop up calendar in adobe acrobat or any other adobe tool via adobe javascript ?No third party tools needed(Eg:formrouter)

I want to create a pop up calendar in adobe acrobat or any other adobe tool via adobe javascript in a PDF form .
I wish to create the calendar without any third party tool.
I found few options like formrouter and also pdf scripting.
But I was to create the calendar via pure Adobe Javascript. If no such option is there inbuilt pop up calendar control in any adobe tool to design the PDF form and afterwards save the same as PDF.

All 3 of the options provide are all JavaScript. There is no plug-in used. You do need to place the JavaScript code text file into a special folder so that the menu and tool bar tools that allow execution of the JavaScript code and associate the pop-up calendar with a specific field.

Need help on choosing adobe tool

Hi,
We are evaluvating a tool to convert word document to pdf for our prestegious client.
Below are requirements,
Requirement 1:
Source- MS Word document
Target- PDF
1) Conversion of MS Word document to PDF through online. Here Word document content don't follow any specific layout disagn.
User wants pdf format should be as same as Word document including font, file layout, header, footer.
2) Target Pdf should dynamically generate content while reading word document. i.e it has to replace <placeholders> with the data read from DB.
3) Target Pdf should also merge some other pdf documents during conversion
Requirement 2:
Source- PDF
Target- PDF
1) User will provide PDF which has user data aswell as <placeholders>. We need to replace the <placeholders> with the data read from DB & generate PDF.
Please let us know which adobe tool would suite better for above said requirements.
Note: From my initial analysis I found 'LiveCycle PDF Generator ES ' and 'LiveCycle Output ES2' are suitable to 'Requirement 1'. Please let me know your comments on this.
Thanks,
Kumaresh
9886190109

Take a look at the Canon line. By that, I mean the output.

Need information on open source testing tools for ADF web applications

Hi experts,
I need to investigate on new feasible open source Java testing tools for testing ADF web applications. I have tried to google a lot but getting confused.
My requirements as as under:
1. The tool must be open source.
2. It should be easy to understand and to work upon by the tester and developers.
Selenium based testing approach is already in place for testing the application but need to search for tools other than Selenium which shall prove suitable for testing ADF applications. Kindly let me know your inputs / suggestions.
Thanks a lot in advance.
Neelanand

Hi,
Have a look at JMeter http://jakarta.apache.org/jmeter/index.html
1. The tool must be open source.It is.
2. It should be easy to understand and to work upon by the tester and developers.I guess it is.
There are some specifics in configuring it for ADF, but Chris Muir wrote a nice blog about how it's done, check it out http://one-size-doesnt-fit-all.blogspot.com/2010/04/configuring-apache-jmeter-specifically.html
Pedja

I need to uninstall Adobe Flash Player Installer/Uninstaller 14.0 r0

I need to uninstall Adobe® Flash® Player Installer/Uninstaller 14.0 r0 but have looked everywhere for how to do this & can not find out how to do this can someone please help? I am using A Sony Vaio, Windows Vista Home Premium 32 bit, I use Chrome Version 36.0.1985.143 m.
I want to get it off of my system because ever since I installed it I have had problems with Chrome loading it does not want to load then if I restart my comptuter & I click on chrome 5 windows open up at one time a white box appears saying "Your profile can not be used because it is from a newer browser version of google chrome. Some features may be available. Please specify a different profile directory or use a different version of chrome" then if you click ok it shuts all the windows down. I have figured a way to get one window to stay open so I can use chrome, now I do have other browser I can use but I do not like them at all & do not have a flash player since mine is built in with Chrome. So on to the other problem that began as soon as I downloaded this & I understand it may not be this but I still want to get it off of my computer. I also have been having trouble with my flash player error messages: saying it has stopped working constantly, it says upgrade flash text, a plug in shock wave flash isn't responding then in (stop plug in) it wants you to hit. I have run 3 different Mallware programs through my computer just in case that was one question that was going to be ask. No other programs jave been downloaded wither.
I am not very good with computers so I have to come to places like this for help & I really have to have help explaining what to do because do not know much about computers other then getting on them & surfing the web & some basic things. When chromes message said specify a different profile directory that went right over m head. So that should give you an idea where I am coming from. I want to thank you in advance & hope I have made sense in what I have written I tried to give all the information that I could.

Your screenshot of task manager clarifies things.
When I replied, I had been looking at the screenshot of the desktop from the original poster, which shows the uninstaller executable and it's properties. That executable doesn't install anything -- it can just be dragged to the trash; however, that didn't completely align with the behaviors either of you were describing, and we've been trying to figure out what you were talking about. It wasn't making a lot of sense to me, and it's not a question that I've seen come up before, at least not articulated this way.
FlashUtil32_XX_XX_XX_XX.exe is the sandbox broker for Internet Explorer. You can read more about the sandbox work here: Flash Player Security with Windows 8 and Internet Explorer 10
The description listed in Task Manager is a bug, and the source of the confusion. We've been doing a lot of work modernizing our build systems, and this is fallout from that work. This is something I'd like to see cleaned up, but it's pretty low on the list of priorities.
The broker service is invoked when Internet Explorer is running in Protected Mode. On my Windows 7 machine running IE 10, running Flash content in Internet Explorer with Protected Mode enabled causes the broker service to be invoked (this is probably true for previous versions as well, but I didn't test them). If I disable Protected Mode and restart Internet Explorer, the broker is not invoked, which is expected.
To disable Protected Mode, launch Internet Explorer and choose security. Uncheck Enable Protected Mode. Internet Explorer will restart, and you should be able to verify that the broker is no longer invoked when loading content with Flash Player.
I've included a screenshot showing the expected processes in both scenarios below. As the Flash Player ActiveX control is loaded into an Internet Explorer process, you'll see the child explorer.exe process listed, which hosts the Flash ActiveX control in the process list.
Sandboxing the Flash Player plug-in is an important security mitigation intended to increase the cost of successfully developing and deploying malware. While it's not a panacea, it significantly raises the bar for attackers. As I'm sure you've read in the news and trade literature, the threat landscape has evolved significantly over the last few years, and modern security threats and their mitigations are a necessary reality. New mitigations typically come with some additional processing overhead. The overhead varies based on the architectural choices made by the particular browser vendors, but the overhead in IE is pretty reasonable.
We haven't published a blog post specific to IE, but if you're interested in the implementation details, the sandbox architecture is similar to what we did with Protected Mode for Firefox on Windows. The Flash Player process that handles untrusted content runs at Low Integrity, which restricts access to critical system resources in the event that you encounter malware designed to take control of the Flash Player process. Access to system resources is negotiated through a Medium Integrity broker process. Without Protected Mode, the Flash Player process handling untrusted content runs at Medium Integrity, making it easier for malware to escalate privileges from a hijacked process. Depending on the functionality in play, a lot of message-passing can take place between IE, the broker and Flash Player. We've effectively doubled the number of messages that get passed, plus put a bunch of validation checks in, and all of that consumes CPU. It also makes your web browsing activity more secure.
Some desktop applications (Yahoo Messenger, for example) also use the ActiveX version of Flash Player installed on your machine. This could explain why you see Flash Player and the broker invoked unexpectedly. We're also aware of an issue on Vista where the broker doesn't always exit as expected. In that instance (and on WinXP), I'd highly recommend that people use Google Chrome for web browsing, as Google has extended some security mitigations that would only be available to Internet Explorer users running in newer versions of Windows, and it doesn't suffer from this specific issue with the broker.

I need to install Adobe Reader to take a course but I cannot get it to work

I am trying to take a 3 hour course online and I have to download adobe reader. I have done this or so my computer says I have, but still cannot get the information I need to take the course to work. I get a message saying "if the I need to install adobe reader".
How do I get this fixed? I need this course in order to renew my tradesman license.
Thanks

dawnefrom providenceforge wrote:
I am trying to take a 3 hour course online...
Are you expected to download files from the course to look at on your computer or will all of the course be done completely online? If the course takes place entirely online, what may be needed is the Adobe Reader plugins getting installed properly in Safari. Since you're posting this in the Yosemite forum we can assume your using Yosemite, not Snow Leopard (10.6.8), so the plugins may not automatically be working. Assuming Reader has actually been installed, take a look at the instructions Adobe gives for activating the plugins.
BTW, do you have "Adobe Reader" in your Applications folder?

I have MAC OSX 10.5.8 and need to install adobe illustrator. I checked the compatibility and found that CS5 will work.Can any one help where i can find it. The trail version is fine with me.

I have MAC OSX 10.5.8 and need to install adobe illustrator. I checked the compatibility and found that CS5 will work.Can any one help where i can find it. The trail version is fine with me as i just have to use it for couple of days till i get my mac book back from service. Can any one help me on this.

You are welcome, ameronweb.
To elaborate a bit, you may come across offers of a new/unopened/unregistered version, which is the simplest case (you would need a guarantee). Other cases require much detailed information (and a guarantee).
If upgrading to 10.6.8 or higher is an option, you could use CS6.

Need info on adobe pdf generator

Hi,
We are evaluvating a tool to convert word document to pdf for our prestegious client.
Below are requirements,
Requirement 1:
Source- MS Word document
Target- PDF
1) Conversion of MS Word document to PDF through online. Here Word document content don't follow any specific layout disagn.
User wants pdf format should be as same as Word document including font, file layout, header, footer.
2) Target Pdf should dynamically generate content while reading word document. i.e it has to replace <placeholders> with the data read from DB.
3) Target Pdf should also merge some other pdf documents during conversion
Requirement 2:
Source- PDF
Target- PDF
1) User will provide PDF which has user data aswell as <placeholders>. We need to replace the <placeholders> with the data read from DB & generate PDF.
Please let us know which adobe tool would suite better for above said requirements.
Note: From my initial analysis I found 'LiveCycle PDF Generator ES ' and 'LiveCycle Output ES2' are suitable to 'Requirement 1'. Please let me know your comments on this.
Thanks,
Kumaresh
9886190109

I've not seen a response from others, so I'll chime in. If the answers are not in sufficient detail, I can find someone else to go to the next level.
Requirement 1: The key thing to keep in mind is that PDF Generator is a server-based framework around word, at least for the word to PDF part of its functionality.
1-1) Conversion of Word to PDF... PDF Generator does this well. Note that it will require the installation of MS Office or will use Open Office. Given your fidelity requirement, you probably want to use Office.
1-2) The integration of dynamic data is less clear. PDFG does not support this directly, as we use MS Office. I'm not a Word expert, but if you can pull of the dynamic content access and have the appropriate access paths available from Office as it is deployed on the server.
31-3) Both Output and PDF Generator use a common service called Assembler for the merge. This should be an easy usecase.
Requirement 2: Generation of PDF from a template.
The best product for you is LiveCycle Output. It will take a template from LiveCycle designer, either static of dynamic, and create PDF at moderate volumes. I'd suggest that you look at Designer, including its template import facilities, and then consider how you can get the data for your placeholders into XML format. Output is then quite easy to do the data merge, formatting, and PDF generation.

Need help with Patch Tool in CS5

I am having a problem using the patch tool in Photoshop CS5. I click on the Patch Tool and select the Source option from the upper tool bar. Then I circle a gray area in the background of my photo and, holding down the left mouse button, I drag the selection to a black area in the background and release the mouse button. Instead of turning the selected area black it just makes the area slightly darker than it was originally. I just don’t understand why I can’t use the patch tool and any help would be appreciated.

Thank you very much for these suggestions. Robert
Noel Carboni <[email protected]> wrote:
Noel Carboni http://forums.adobe.com/people/Noel+Carboni created the discussion
"Re: Need help with Patch Tool in CS5"
To view the discussion, visit: http://forums.adobe.com/message/4308270#4308270

Need information on BAPI for Sales Process ?

Hello SAP folks,
I am currently involved in Consumer Portal integration with SAP System. I need information about the right kind of BAPI that would help me to enter and retrieve data from SAP database. I have noted down following funtionality in Sales And Distribution areas where i require a BAPI :
1. Account Management -- > There are concept of Sales rep, Dealer on the consumer Portal. My question is -- > Could anyone suggest some BAPI for creation of User ID for Sales rep and Dealer as well i need information on the BAPI which would also help me displaying the data from SAP database. As far i know, in Customer Master record, we maintain Contact person and Buiness Partners. So how to take up these development into consideration ???
2. Mulitple Credit Card Management --> Please suggest the BAPI for meeting this functionality at Sales order level.
3. Customer Inclusion/Exclusion --> Here the basic need is exclude certain customer from availabling some product. Please suggest the BAPI for this operation.
Regards,
Sarthak

Dear Sarthak M,
Assume you have gone through the transaction BAPI,
where you can find all relevant BAPI's .
select the relevant text such as "sales orders" - from the right side of the screen - check "Tools" tab,where you will find "Create BAPI list", click to search for the Function moduels.

Need information about retail project

hi all
tommorow i had a interview with my client.
i need information about retail project.
like terms and business process overview .
documentaiton can be sent to: [email protected]
points will awarded for sure.
kiran

Hi Rama
Retailing consists of the sale of goods or merchandise, from a fixed location such as a department store or kiosk, in small or individual lots for direct consumption by the purchaser.[1] Retailing may include subordinated services, such as delivery. Purchasers may be individuals or businesses. In commerce, a retailer buys goods or products in large quantities from manufacturers or importers, either directly or through a wholesaler, and then sells smaller quantities to the end-user. Retail establishments are often called shops or stores. Retailers are at the end of the supply chain. Manufacturing marketers see the process of retailing as a necessary part of their overall distribution strategy.
Shops may be on residential streets, shopping streets with few or no houses, or in a shopping center or mall, but are mostly found in the central business district. Shopping streets may be for pedestrians only. Sometimes a shopping street has a partial or full roof to protect customers from precipitation. Retailers often provided boardwalks in front of their stores to protect customers from the mud. Online retailing, also known as e-commerce is the latest form of non-shop retailing (cf. mail order).
Shopping generally refers to the act of buying products. Sometimes this is done to obtain necessities such as food and clothing; sometimes it is done as a recreational activity. Recreational shopping often involves window shopping (just looking, not buying) and browsing and does not always result in a purchase.
Most retailers have employees learn facing, a hyperreal tool used to create the look of a perfectly-stocked store even when it is not.
Contents [hide]
1 Retail pricing
2 Retail Industry
3 Etymology
4 Retail types
5 See also
6 Notes
7 References
[edit] Retail pricing
The pricing technique used by most retailers is cost-plus pricing. This involves adding a markup amount (or percentage) to the retailers cost. Another common technique is suggested retail pricing. This simply involves charging the amount suggested by the manufacturer and usually printed on the product bize the manufacturer.
In Western countries, retail prices are often so-called psychological prices or odd prices: a little less than a round number, e.g. $6.95. In Chinese societies, prices are generally either a round number or sometimes a lucky number. This creates price points.
Often prices are fixed and displayed on signs or labels. Alternatively, there can be price discrimination for a variety of reasons, where the retailer charges higher prices to some customers and lower prices to others. For example, a customer may have to pay more if the seller determines that he or she is willing to. The retailer may conclude this due to the customer's wealth, carelessness, lack of knowledge, or eagerness to buy. Another example is the practice of discounting for youths or students. Price discrimination can lead to a bargaining situation often called haggling, in which the parties negotiate about the price. Economists see this as determining how the transaction's total surplus will be divided into consumer and producer surplus. Neither party has a clear advantage, because of the threat of no sale, in which case the surplus vanishes for both.
Retailers who are overstocked, or need to raise cash to renew stocks may resort to "Sales", where prices are "marked down", often by advertised percentages - "50% off" for example."Sales" are often held at fixed times of the year, for example January sales, or end-of-season sales, or Blue Cross Sale
[edit] Retail Industry
Retail Industry has brought in phenomenal changes in the whole process of production, distribution and consumption of Consumer Goods all over the world. In the present world most of the developed economies are using the Retail Industry as their vital growth instrument. At present, among all the industries of U.S.A the Retail Industry holds the second place in terms of Employment Generation. In fact, the strength of the Retail Industry lies in its ability to generate large volume of employment.
Not only U.S but also the other developed countries like U.K, Canada, France, Germany are experiencing tremendous growth in their Retail Sectors. This boom in the Global Retail Industry was in many ways accelerated by the Liberalization of Retail Sector.
Observing this global upward trend of Retail Industry, now the developing countries like India are also planning to tap the enormous potential of the retail sector. Wal-Mart,the world's largest Retailer has been invited to India. Other popular Brands like Pantaloons, Big Bazar, Archies are rapidly increasing their market share in the retail sector. According to a survey, within 5 years, the Indian Retail Industry is expected to generate 10 to 15 million jobs by direct and indirect effects. This huge employment generation can be possible because of the fact that being dependent on the the Retail Sector shares a lot of Forward and Backward Linkages.
Emergence of a strong Retail Sector can contribute immensely to the economic development of any country. With a dominant retail sector, the farmers and other suppliers can sell their produce directly to the major retail companies and can ensure stable profit. On the other hand, to ensure steady supply of goods, the Retail Companies can inject cash into the production system. This whole process can result into a more efficient production and distribution system for the economy as a whole.
[edit] Etymology
Retail comes from the French word retaillier which refers to "cutting off, clip and divide" in terms of tailoring (1365). It first was recorded as a noun with the meaning of a "sale in small quantities" in 1433 (French). Its literal meaning for retail was to "cut off, shred, paring". Like the French, the word retail in both Dutch and German (detailhandel and Einzelhandel respectively) also refer to sale of small quantities or items.[citation needed]
[edit] Retail types
According to Jim there are three major types of retailing. The first is the market, a physical location where buyers and sellers converge. Usually this is done in town squares, sidewalks or designated streets and may involve the construction of temporary structures (market stalls). The second form is shop or store trading. Some shops use counter-service, where goods are out of reach of buyers, and must be obtained from the seller. This type of retail is common for small expensive items (e.g. jewelry) and controlled items like medicine and liquor. Self-service, where goods may be handled and examined prior to purchase, has become more common since the Twentieth Century. A third form of retail is virtual retail, where products are ordered via mail, telephone or online without having been examined physically but instead in a catalog, on television or on a website. Sometimes this kind of retailing replicates existing retail types such as online shops or virtual marketplaces such as futurebazaar.com or Amazon.[2].
Buildings for retail have changed considerably over time. Market halls were constructed in the Middle Ages, which were essentially just covered marketplaces. The first shops in the modern sense used to deal with just one type of article, and usually adjoined the producer (baker, tailor, cobbler). In the nineteenth century, in France, arcades were invented, which were a street of several different shops, roofed over. counters, each dealing with a different kind of article was invented; it was called a department store. One of the novelties of the department store was the introduction of fixed prices, making haggling unnecessary, and browsing more enjoyable. This is commonly considered the birth of consumerism [3]. In cities, these were multi-story buildings which pioneered the escalator.
In the 1920s the first supermarket opened in the United States, heralding in a new era of retail: self-service. Around the same time the first shopping mall was constructed [4] which incorporated elements from both the arcade and the department store. A mall consists of several department stores linked by arcades (many of whose shops are owned by the same firm under different names). The design was perfected by the Austrian architecht Victor Gruen[5]. All the stores rent their space from the mall owner. By mid-century, most of these were being developed as single enclosed, climate-controlled, projects in suburban areas. The mall has had a considerable impact on the retail structure and urban development in the United States. [6]
In addition to the enclosed malls, there are also strip malls which are 'outside' malls (in Britain they are called retail parks. These are often comprised of one or more big box stores or superstores.
Non-traditional exterior of a SuperTarget, JacksonvilleLocal shops can be known as brick and mortar stores in the United States. Many shops are part of a chain: a number of similar shops with the same name selling the same products in different locations. The shops may be owned by one company, or there may be a franchising company that has franchising agreements with the shop owners (see also restaurant chain).
Some shops sell second-hand goods. Often the public can also sell goods to such shops, sometimes called 'pawn' shops. In other cases, especially in the case of a nonprofit shop, the public donates goods to the shop to be sold (see also thrift store). In give-away shops goods can be taken for free.
There are also 'consignment' shops, which is where a person can place an item in a store, and if it sells the person gives the shop owner a percentage of the sale price. The advantage of selling an item this way is that the established shop give the item exposure to more potential buyers.
The term retailer is also applied where a service provider services the needs of a large number of individuals, such as with telephone or electric power.
IS Retail was original develop to meet specific needs of Retail industry where standard SD/MM cannot.
- Significant functionality difference are:
- Store specific features are built into IS Retail where as it is not in
standard SD/MM.
- Mass processing of pricing (some of the retail features were
included as standard SAP as of 4.6)
- Assortment handling is not in standard SAP
There are other differences in inventory costing/valuation etc.
Retail valuation only available in SAP Retail.
What is known in the trade as the "retail inventory method" or the "retail method" involves valuating stocks at retail, often aggregated at merchandise category or departmental level.
Both the cost method and the retail method can be used in SAP Retail.
Actually IS-Retail is a combination of MM and SD plus other funtionalities speacially developed for the retail industry such as:
Promotions
Pricing
Assortments
Clasification
Merchandise category
Seasons
Is important to mention that all the funtionality of MM and SD is avialable in SAP IS-Retail with some diferences in some transactions:
Material master data (article in retail) has some diferences.
Vendor master data.
Site master data.
Reward if useful to u

Need information on adobe tool

Similar Messages

Maybe you are looking for