Need information on how to upgrade from 10.5.8 to make computer compatable to iphone upgrade of 11.5.1

hi everyone:  I require some information on how to upgrade from 10.5.8 to make my mackbook pro compatable
with the iphone upgrade. Please note that I have gone thru the upgrades on this computer and it tells me there are
no new ones available...... I need to get my upgrade past the 11.5.1 level.....so do I need to purchase a new
upgrade program....and if so which one...as I have been thru the apple store and so far as i can tell
the ones that are listed such as maverik, lion and snow lepard are not high enough. 
To anyone who replies, thankyou so much for taking the time to help me.  It is truely appreciated.

11.1.5 is likely to be the version of iTunes you are being asked to run, not the version of Mac OS X.
To get a higher version of iTunes, you likely have to upgrade Mac OS X. All Roads lead through the 10.6 Upgrade, available as a physical DVD only, from the Apple Online store for about US$20:
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
This is one of the most benign Upgrades Apple has ever issued. The size of the Operating System gets smaller, performance is slightly faster, and very few Applications are left behind. If you have some older PowerPC Applications, you may need to ask to install the Optional Rosetta emulator for PowerPC code when you install.
Once your 10.6 install is fully Updated to 10.6.8 using Software Update, the Mac App Store will appear, and future upgrades (if needed) will be handled through variations of online purchases.

Similar Messages

  • I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me?

    I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me? The final result would be a spreadsheet telling there were 8 people from 20 to 39 years old, 14 peolple from 40 to 59 and so on...

    jpqcampos wrote:
    This appears to be an 'input form' using 'Radio Buttons' to select the category. Neither of these features are supported in Numbers '09.
    You can input the data on one table and summarize it on a second table, but the input table will continue to hold data for each event.
    And by using the Reorganize button, you can hide all but two rows of that table to approximate the appearance and performance of an input form.
    Here are the two tables, Data on the left and Summary on the right. Notes below.
    The grey-filled columns in both tables are 'working' columns, and may be hidden (as shown in the image below).
    Data table:
    D1 contains the word "TRUE" (in capital letters). (This row is always shown.)
    D2 is empty, or may contain any value except "TRUE" (This row is always hidden under the Reorganize rule.)The rest of Row 2 of this table requires the data shown: a number outside the range to be counted (999), and two checkboxes, both checked.
    D3 (and filled down the rest of column D):   =AND(OR(B2,C2),NOT(OR(B3,C3)))
    The formula returns TRUE only for the first unused row in the table (ie. the first row for which neither checkbox has been checked)
    Summary table:
    Column A contains labels for the age ranges to be counted.
    Column B contains the same information in the form necessary for the formulas in columns C and D. They need a numeric value, and that value must be the largest acceptable value in the range to be counted.
    C2 (and filled right to column D, then both filled down to row 5):
        =COUNTIFS(Data :: $A,"<="&$B,Data :: B,TRUE)-SUM(C$1:C1)
    Two changes from the previous example:
    COUNTIFS is used to separate the Native and Foreign counts as well as the age range to be counted.
    The amount subtracted from each result is the SUM of the earlier results, and includes the text value in the first cell of the column (which is interpreted by SUM as a zero).
    See note below regarding my earlier formula.
    When the greyed columns are hidden and the checkbox in the Reorganize pane is checked, the two tables will appear as shown below:
    Close the reorganize pane, and the 'data entry form' is ready to use.
    To use, enter the age first, then check one of the boxes.
    As soon as one box is checked, the row will be hidden, and the next (unused) row will be shown.
    Regards,
    Barry
    Note regarding formula in my earlier post:
    The earlier formula will give erroneous results as it subtracts only the count directly above it from its count of persons in the age range 0-n.
    In E2 of that table, replace "-E1" with "-SUM(E1:E$1)
    Fill down to E8.
    Ignore the instructions (in that post) following "Fill down to E8."
    B

  • I'm a Microsoft Outlook for Mac user, I need information of how to know when e-mail was readed and confirm receipt of e-mails sent. thank you!  regards Mauricio

    I'm a Microsoft Outlook for Mac user, I need information of how to know when e-mail was readed and confirm receipt of e-mails sent. thank you!  regards Mauricio

    Mail and Address book

  • I have an MFC J410W Brother's printer, and I need instructions on how to print from my IPAD 4.

    I need to know how to print from my IPAD 4 on my MFC J410W Brother's printer.

    Printing from an iPad or iPhone
    To print directly from an iPad you need an AirPrint - enabled printer on the same wireless network as the iPad. All AirPrint printers are wireless but not all wireless printers are AirPrint-enabled. Your Brother MFC-J410W is not an AirPrint printer.
    If you do not have an AirPrint printer, a number of workarounds exist that enable the use of any printer you normally use, even older ones that may predate AirPrint by decades. Search for the following products:
    handyPrint (Mac only, donation-supported)
    Printopia (Mac only, $19.95 with free trial)
    These are utilities you install on the Mac you normally use for printing, enabling it to act as an AirPrint print server. The Mac must be "on" but may be asleep for them to work. The iPad needs nothing else, no iOS apps need to be installed and no configuration is necessary. If your computer can print, so can the iPad, using one of these utilities on your Mac.
    Equivalent utilities may exist for PCs but I have no experience with them - I suggest https://www.collobos.com
    You can also buy this standalone hardware print server, bypassing the need for a computer altogether:
    http://www.lantronix.com/it-management/xprintserver/xprintserver.html
    Otherwise you will need to buy an AirPrint printer or multifunction device.
    The following are my recommendations
    AirPrint compatible Brother laser devices
    and
    AirPrint compatible Brother inkjet devices
    Read the reviews and choose wisely.

  • How to downgrade from iOS 8.1 to 7.1.2 for iPhone 5 ?

    Dear Experts
    How to downgrade from iOS 8.1 to 7.1.2 for iPhone 5 ?
    The situation is that in Hong Kong, I bought the iPhone 5 for my mainland China friend.
    The seller said that the iPhone 5 was brand new and was come from USA.
    I found that iPhone 5 was in iOS 8.1. I wonder that why brand new iPhone 5 would be installed in iOS8.1?
    My friend finds that the response of iPhone 5 is so late.
    He prefers to downgrade to iOS 7.1.2.
    Please reply.
    Thank you
    Regards
    Lawrence

    How to downgrade from iOS 8.2 to 7.1.2 for iPhone 5
    Asking the same question a 2nd time will not get a different answer.

  • I have a software license certificate for the upgrade from CS5.5 to CS6, but I have lost the upgrade file due to a disk crash in my computer.

    I have a software license certificate for the upgrade from CS5.5 to CS6, but I have lost the upgrade file due to a disk crash in my computer.
    where can I get the upgrade file from ?
    thanks,
    Ofer

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Need Information about  how to integrate with Struts

    i need information/sample code for how to integrate flex with
    jsp/struts.
    please help me

    Hi Dimitri,
    I am looking for 820,824 for ANSIX12 format.
    And i guess SAP has provided example mappings only for 810,830 and 850.
    I am unable to see the example mappings provided by sap for 820/824 in B2B mapping toolkit.
    Is there any way or place to find the example mappings for these formats?
    Regards,
    DInesh Male

  • I need to install photoshop cs4 extended from a disk to a new computer because my old computer had a hard drive crash. There is no serial number on the back of the case.  How can I obtain a usable serial number?

    I have to install Photoshop CS4 extended on a new computer from a disk because my old computer had a hard drive crash.  There is no serial number on the back of the case.  How can I obtain a usable serial number?

    Find your serial number quickly
    You can activate software without following up and registering it... at least that was the case in the past.  The serial number is normally located on the disc case or a box inside the main box.  If you did not purchase the disc from Adobe then it is possible you would have dealt with a redemption code, in which case it would have been up to you to keep a record of the serial number, especially if you did not follow up and register the software.

  • Upgrading from 10.2 to 11.1/11.2 plus OS upgrade

    Hi Experts!
    I need a little advice from you guys. I am planning to upgrade from Oracle RAC 10.2 to Oracle RAC 11.1/11.2.
    I am not able to decide which one will be good idea that is upgrading to 11.1 or 11.2.
    And on the top of it we are going to have OS upgrade from SuSe 9 to Suse 10 64 bits.
    I did not find a good document on how to move from Oracle RAC 10.2 to Oracle RAC 11.1/11.2.
    How can I achieve the high availability during the OS upgrade?
    Do I need to take any action after the OS upgrade to relink the Oracle binaries?
    Below are my environment details:
    OS: Suse 9 64bit
    DB: 10.2.0.4
    ASM: NO
    planning to upgrade on same server:
    OS upgrade to: Suse 10
    DB: 11.1.0.7 or 11.2.0.2
    ASM: NO
    Let me know if I need to post more details.
    Thanks in advance.
    MAW

    Thanks for your reply Xaheer!
    I would like to have my DB up and running on some other machine while the OS Upgrade is being performed.
    I am planning for Logical standby (read only), switchover (read write) and redirect user connections to this DB.
    Once the OS Upgrade is completed, I will perform a switch over and bring my DBs down for Upgrade.
    My goal is to have minimum down time for the PROD.
    Do you know any MOS note on how upgrade from 2 node RAC 10.2.0.4 to 2 node RAC 11.1.0.7 or 11.2.0.2.
    I am not clear with 11gR2 Upgrade Companion.
    Thanks again for taking out time in answering my questions.

  • Upgrading From Cs2 With Cs3 Extended On Computer

    I currently have both PS CS2 as well as CS3 Extended on my computer. When I decided to upgrade to CS3 from CS2 I went with the extended version but find I really have no use personally for the 3D tools. Strangely, there is no way to 'downgrade' from CS3 Extended to plain old garden variety CS4. However, it does appear that you can upgrade from CS2 to CS4.
    If both CS2 and Cs3 Extended are on my machine and I purchase a CS4 upgrade will the software see the CS2 and allow an upgrade to CS4, or will I be 'shut out' because I have CS3 Extended on the machine? Will I have to uninstall CS3 Extended and then do the upgrade to CS4?
    Has anyone done this....seems like one of the two options above should work. Thanks.
    Howard

    Hi,
    Just to let people know, this problem is far from 'fixed' from an Adobe Customer Service perspective has wasted (so far) 5 hours of my time without any resolution. I upgraded to Vista 64 bit to get more memory for Lightroom and Photoshop. Has to install my Extended CS3 then the CS4 Upgrade. Of Course the CS4 upgrade wouldn't recognise the CS3 Extended install. "No problems" I thought - I'll call my friendly customer service people tomorrow during working hours (note I live in Australia so these people are in Manilla). In the mean time I tested CS4 in trial mode
    Anyway called Customer Service the next morning (today) and found that CS4 would not even accept the upgrade Serial number as it had decided that it was really a CS4 Extended Version and wanted a Extended Version Serial Number. I was advised that this was a known 'feature' as licence keys are further restricted by the language of the original install. And I had inadvertently left the upgrade install at the default of English (US) whereas my previous CS3 was set to a language of English (International) and once you start the trial it defaults to the version of the installed product rather than the version of the upgrade. ...Sigh.. After lots of fun with customer support and various failed attempts we had to do a complete uninstall of CS4 and a registry clean, a Photoshop Cache delete and a clean install to get back to square one (which is entering a CS4 product key)... Because the full install takes time, the helpful Technical Support person asks me to call back when it is done and gives me a support Case Number etc.
    I call back ready for the unlock and quote my Support Case Number. Being a call centre I get a new person. And 'helpfully' all the extra information was not in my case file, just the basics that I had an upgrade issue and that it was resolved (lol). So we start again. This new technical support person says that it is not an approved upgrade path from CS3 Extended to CS4 and that he needs to put me through to Customer Support to explain my options (I barely control my urge to scream!).
    After a long wait I spend ages talking to Customer Support who flatly deny that there is any approved path from CS3 Extended to CS4 standard and suggest that I return the upgrade and buy and extended one. I try again and get a second customer support person! Eventually after pushing they agree to try and seek 'special approval' for a non standard upgrade. At this point - after 5 hours of installing, uninstalling and hours on the phone to Adobe I am no closer to having a working CS4 upgrade.
    I have escalated to Jack Nash via his Blog to (hopefully) get help. But it is really disappointing to have an issue that was supposedly resolved back in early October 2008 still exist and such challenges tyring to get Customer Support / Technical Support to address it.
    My real nightmare is the future... With Windows 7 coming next year and doubtless CS5 in a couple of years... Unless Adobe change their processed I can see a nightmare many days process involving having install the original CS3, then CS4, then the special approval (again!) then CS5 etc... Really Adobe need to join the modern world. Adobe have our serial numbers held against our customer registration Email etc. So we should not have to have older versions installed in series to do an upgrade. Just have the install do an automatic check on-line that we have the most recent version licensed to us... and the on-line code could be e4asily changed to fix problems like this, rather than the rigid activation code installed on the CD.

  • I want to upgrade from CS3.  What is the highest contribute I can upgrade to.  Also, I want to inst

    I want to upgrade from Contribute CS3.  What is the highest system I can upgrade to?  I need to install on 2 computers; one is Windows and the other is MAC.  Can I do this?
    Thanks
    Danny

    Contribute 6.5 is the current version and Adobe only sells current versions.
    Unfortunately Contribute CS3 is too old to qualify for an upgrade. Only CS4 and newer qualify.
    http://www.adobe.com/products/contribute/buying-guide.html
    You'll either have to pay full price for CS6.5 or find another software solution.

  • After upgrading from ios 7 I was unable to activate my iphone 5

    after recent upgrading from ios 7,Iwas unable unlock the sim card as well as not been able to activate my phone

    What is the exact wording of the error message?
    Has the iPhone been jailbroken or modified to work
    with other than the original wireless provider?

  • How do we sink our music on our Dell computer with our Iphone 5c?

    How do we sync our music from our Dell Computer to our iphone 5c?

    Sorry, didn't mean to insult you. I was just clarifying that that page did not help.
    We are 60 somethings and if we could explain why it didn't work, we could probably figure out how to make it work.
    Sorry to waste your time...

  • I have a older Ipod nana 4th generation and older computerwith a itunes librairy on  it how doi get that libriary and on my new computer and my iphone

    I have a older Ipod nano 4th generation and older computer with a itunes  librairy on  it how do i get that libriary  on my new computer and my iphon

    iPhone questions should be posted in the iPhone forum area.
    How to use your iPod to move your music to a new computer

  • I need information on how to install and execute the export/import utility

    Hi there,
    I am migrating an application from Weblogic 10 to Weblogic 10.3. I need to import a desktop from a .portal file in Weblogic 10.3. I know how to do the process of installing and executing this tool in WebLogic 10, but I don't know how to do it on the 10.3 version, because it's different and I haven't found any information about this process on the internet.
    Could you please tell me what do I have to do? or give me a document that can I follow the steps from?
    Thanks & Regards
    Franco Utreras.

    Hi Franco,
    If you will post your Query in http://forums.oracle.com/forums/forum.jspa?forumID=573 (WebLogic Portal Specific Forum)...then you may get more Accurate, Quick and Experties Answers.
    Thanks
    Jay SenSharma
    http://jaysensharma.wordpress.com  (WebLogic Wonders Are Here)

Maybe you are looking for