Need information on sending files

Hello ,
I have a question that I am very curious about, and I hope that someone could help me out. So, about 4 months ago, I was sending alot of files to one person via skype, and he haven't accepted all of them (nor declined), I guess he just didn't saw them, we had some trouble with skype that day. And now, after a long period of time, I hear the skype sound of a file being declined to send, and the "orange color" around his avatar, just like the one you would see when you get a new message (but there wasn't). Now to my question : Is there some sort of time limit that skype has for files not being send, and, lets say, maybe after that time it automatically declines it for the user, or is it absolutelly the person that finally declined it? This question might sound stupid, but it's really important to me right now and I must know.
Thanks in advance
Solved!
Go to Solution.

Nevermind, don't need help anymore. Just found out that latest skype version automatically accepts and sends files if they're still available.

Similar Messages

  • Need Help in Sender File Content Conversion

    Hi All,
    I request your expert advice on Sender File content Conversion. I need to process the below pasted file. I was able to achieve this by keeping a offset of 6 in Sender PI File Adapter (PI 7.1) to ignore first 6 lines and used a Unix script to remove last line"END OF REPORT".
    Now my new requirement is I need to capture the date "DECEMBER 2009" from line 3. How can I do this. I have set offset as 6 so Adapter will start processing from line 7. If I don't set offset Interface fails. Please suggest. Thank you.
    ABC LAB            XYZ LIMITED"
                       TRIAL BALANCE"
                       FOR THE PERIOD ENDED DECEMBER 2009"
    "TEST Bank","101000",-1589365.58,0.00,738295.08,0.00
    "TEST Bank Clearing A/c","101200",0.00,0.00,14848018.55,0.00
    "TEST Bank Sweeps","101250",104315957.19,0.00,7571985482.08,0.00
    "TEST Receipts","101260",0.00,0.00,19788596.15,0.00
    "TEST Corporate Deposits","101270",-7776629.87,0.00,-135914980.50,0.00
    "SHARES","00SH",0.00,0.00,-7869890086.22,0.00
    "END OF REPORT"

    Dear Phani,
    Please go through the below blogs:
    File content conversion sites
    /people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
    /people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
    /people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
    /people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
    /people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
    /people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
    /people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
    /people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
    /people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
    /people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
    /people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
    /people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
    /people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
    /people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
    http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
    Please see the below links for file content conversion..
    /people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter - FCC
    /people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter - FCC
    File Content Conversion for Unequal Number of Columns
    /people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns - FCC
    Thanks,
    Satya

  • Need informations about permission file

    hello, first excuse me for my english i speak french and im not very good in english..
    i record (publish file mp4) from flash as3 with fmis 4.5.
    Then i see all file have the permission 0660 when save in the folder in opt/adobe/fms/...
    i change in server.xml the value of mask to 012 but the file is now to 0664
    but i want all files have this permission 0755
    how i can make this?
    i need this because when i publish this file, after i use ffmpeg and when the file is encode i want to delete the original file with php.
    Thanks a lot to help me...

    Have you tried the mask of 022? - You probably need to update the folder permissions so they cascade down (check out the special mods on http://en.wikipedia.org/wiki/Chmod#Special_modes). Can you  have the user the ffmpeg process runs as, in the same group as the fms account? Also you only need 755 on a file to execute it as the group/all, or on a folder to browse it, so on the files 664 should be fine to read the file, but to save one back you need to make sure the directory permissions are correct.
    If i were you I would (and have done on my fms setup for a similar transcoding reason):
    Make sure the users are in the same group
    Update the mask to 007
    Update the folders / files to the correct permissions
    find <root video folder> -type d -exec chmod 2770 {} \;
    find <root video folder> -type f -name '*.mp4' -exec chown <account> {} \;

  • I need information about sending a signal to Flexmotion board

    how can I create a VI which will send a signal (like sine wave)to Flexmotion board

    Could you please be a bit more specific? Do you want to send a sine wave to an analog output of the board? Which board are you using? Do you want a motor move with a sine wave formed velocity profile?
    Regards,
    Jochen Klier
    Application Engineering Group Leader
    NI-Germany

  • Sender file adapter Need to Get Only one record Using FCC

    Hi All,
                  I am using File to ABAP Proxy interface, where i need to Trigger my proxy so in my sender file adapter , i need to configure as such it is should take only one record, from whole file i am using Key field parametrs in FCC but it is taking all the records which is not having the key fields also
    please help me
    Thanking you
    Sridhar

    2A64310       1 6V83970       03751650016001154000                    1 6V9961XT-3   13236157001160
    2A64310       1 6V83970                        000                    1 6V9962XT-3   23236162
    2A64730       1 6V83970       03751650016000106000                    1 6V9962XT-3   13236162000112
    2A64730       1 6V83970                        000                    1 6V9961XT-3   23236157
    2A64741 6V99481 6V83971 4S541403751650016000152360                    1 6V9964XT-3   13236168000166
    2A64741 6V99471 6V83971 4S5414                 000                    1 6V9963XT-3   23236167
    2A64772 6V99492 6V83982 3S860605001650017000244000                    2 6V9965XT-3   13289090000248
    2A65690       1 6V97460       07501226872000110000                    11242153L&MP   1
    2A65690       1 6V97460                        000                    11242121L&MP   2
    EOF
    this is sample file , i need to have any one line , cause i need to just trigger a proxy , i am not to going tp take entire file cause in real time i will getting 100 MB file which will be a performance issue

  • I Need Information Regarding File Upload?

    Where can I get information regarding the File uploading packages in Portal. Is there a specification I can get a hold of. I know such a package exists, as it is used by portal itself. I just need to know where I can get hold of information as to what it is called and how to invoke it.

    Suraj,
    The APIs to do file upload are not public as of yet. We are looking into the feature right now. Currently, the only supported method of file upload is using the Web Interface.
    You may find more information about this in the 9iAs Portal forum
    Sue

  • I need the information to send to my IT people to transfer my copy of Adobe X pro to the new computer case number: 0215291791

    I need the information to send to my IT people to transfer my copy of Adobe X pro to the new computer case number: 0215291791

    Hi Scott ,
    You need to deactivate your product from the old machine and then activate the same on the new one.
    For deactivation Click Help>Deactivate.
    You may also want to refer to the following link to get more information regarding activation and deactivation of your product.
    https://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
    To Activate the product on your new system please get in touch with the Adobe support team.
    http://helpx.adobe.com/x-productkb/global/service1.html
    Regards
    Sukrit Dhingra

  • Windows has the following information about this file type. This page will help you find software needed to open your file. Cannot get SEO quale loaded please help

    I cannot download as I keep getting this when I try
    Windows has the following information about this file type. This page will help you find software needed to open your file.
    File Type: Firefox Browser Extension
    File Extension: .xpi
    Description: Compressed archive of primary file installation components – used by the Mozilla installer script to setup and install various applications. You may search the following Web site for related software and information:
    Please advise how I go about downloading

    despite the workaround, it doesn't fix the real problem. It shouldn't be a huge deal for adobe to add support for multiple svn versions. Dreamweaver is the first tool i've used that works with svn that doesn't support several types of svn meta data. If they're going to claim that Dreamweaver supports svn is should actually support svn, the current version, not a version several years old. This should have been among the first patches released, or at least after snow leopard came out (and packaged with it the current version of svn).
    does anyone know if the code that handles meta data formatting is something that is human readable, or where it might be, or is it in compiled code.
    i signed up for the forums, for the sole purpose of being able to vent about this very frustrating and disappointing situation.

  • Need a help in j2me-send file to a bluetooth address(mobile to mobile)

    Dear All;
    I am new in J2ME programing...
    I have an application, in which i want to send a copy of my application (application.jar) to other bluetooth enabled mobiles.
    I have code for searching and listing other bluetooth mobiles.
    i want to send file to this bluetooth address..i have the address..
    Please help me if anybody can..
    It is so urgent..

    Siyampa, don't multipost. I've deleted your other threads.

  • In Elements 11 how do I get the verification code needed to send files as e-mail attachments ?

    In Elements 11 how do I get the verification code to send files as e-mail attachments ?

    I’ve found it usually works best with web mail via Adobe after obtaining verification. I know some email services block bulk email completely and I’ve only tested it with Gmail which works fine. Should also work with other web mail e.g. Yahoo and Hotmail. Give it a try. Before you start it will help to check your internet security settings. If they are set to High, reduce the settings to Medium temporarily. Then follow these instructions.
    1. Log in to your mail provider on the web and add the following email to your address/contacts book.
    [email protected]
    2. Open Organizer and on the menu click:
    Edit >> Preferences >> Sharing
    3. Choose Adobe Email Service from the client dropdown menu.
    4. Add your name and email address to the fields provided and click OK
    5. Test the system (first use only)  by selecting a photo in organizer and choosing Share >> Photo Mail then click Next (Mac users should use attachments)
    6. Choose a contact then click  Next
    7. Click Next Step, then click Next - the sender verification dialog will open.
    8. Check you have spelt your email address correctly and hit the Resend E-Mail button.
    9. Go to your inbox (also check spam) and when the Adobe mailer message is received copy (Ctrl+C) the long verification code.
    10. Return to the verification dialog and paste it (Ctrl+V) into the Sender verification field and click OK. Wait for validation confirmation then click OK to continue

  • Multiple directory locations in Sender File adapter

    Hi All,
              I have a scenario where my single adapter needs to poll from 7 different directory locations. Is it posible to configure all seven sorce directory location in single sender file adapter.
    Regards,
    Xier

    Hi,
    I apologize for wrong information, actually I never tried but it's possible after seeing this.
    Note:821267
    11. File Sender: Processing Multiple Source Directories
    Q: Can the File Sender Adapter be configured to poll multiple source directories from a single channel?
    A: This functionality is available starting with XI 3.0 Support Package 14 as well as PI 7.0.
    raj.

  • Sender File Adapter - FCC - No incoming field separator - How to do FCC?

    Hi,
    I have a sender File adapter and I need to do the File Content Conversion but there apparently no incoming field separator and the file ocntains just running text - no data records but just information.
    For example the incoming file is something like:
                                    The Hongkong and Shanghai Banking Corporation Limited                      27JAN2009       PAGE 1
                                    Incorporated in Hong Kong with limited liability
    ABC IAL LIMITED                                                               ABU DHABI, UAE
    ABC MIDDLE EAST                                                               Account No.     001-8888888
    ABU DHABI                                                                       Payment Set     AAA
    BBB MAIL BOX NO.99                                                             Contact Person  ABC LIMITED
                                                   7777777777                      Telephone
                                                     AUTOPAY LIST - PROCESSED
                                                     (AUTOPAY-OUT SALARY)
    Payment Date           27JAN2009
    First Party Narrative  .                             66666666
    Second Party Narrative .
    The Message type that I am mapping to contains:
    MT_XXXX
         WA
              Item
              Item2
              Item3
    This is so that the information can be mapped to different field areas and send across to the Receiver Mail Adapter. In the mail i receive, i get the running text. I tried giving the field separator as '0x09' but it is not working.
    I have also tried WA..fieldContentFormatting to nothing but again no luck.
    I have tried with Recordset Sequence with Ascending and variable and have also tried Recordsets per Message with * and blank - but it did not help.
    Please advice.
    Regards,
    Archana

    Hi,
    I assumed that it was tab but when I made the change in FCC, it did not work.
    I would still like to have a output where it looks like below if more than 2 types of information in 1 line as below:
    ABC IAL LIMITED                     ABU DHABI, UAE  
    ABC MIDDLE EAST                  Account No. 001-9999999999999  
    and not something like:
    ABC IAL LIMITED ABU DHABI, UAE   
    ABC MIDDLE EAST Account No. 001-999999999999
    I am not sure what to do here.
    Help please.
    Regards,
    Archana

  • Sender file adapter, file existence check in archive folder if exists rename the same and proceed with current file

    Dear SAP Gurus
    Interface flow:
    File --> File and RFC.
    We have a requirment where PI needs to check the file existency in archive folder and if there is a file already exists with same name we need to rename that file and archive the current file as is...
    Note* Customer don't want to add time stamp!!!!
    For ex today first message processed with file name "UBMO_delta20140626.xml" and archived as is- UBMO_delta20140626.xml
    and customer sends a second file on the same day with same name(UBMO_delta20140626.xml) in this case before archiving PI needs to check whether there is a file exists already in archive folder or not if there is, then it should rename the same like(UBMO_delta20140626_1.xml) and proceed with current message processing and archive the same name(UBMO_delta20140626.xml).
    Many Thanks in advance...
    Nagesh

    Hi Nagesh,
    I think you can use the feature of run operating system command before message processing. you can refer the below wiki for information.
    SAP XI File Adapter OS Command Line Feature - Process Integration - SCN Wiki
    regards,
    Harish

  • Error with the Sender file adapter

    Hello Gurus,
    My scenario is Web service to file... but to initiate webservice i am using file sender adapter.
    I am keeping one dummy file and then file sender adapter will read it and then call the soap adapter.... then it will process the request and generate the response file.
    But now my problem is.... suppose there is some problem in receiver and the file is not getting picked up from the source.... then when next time  i will resolve the error... and again try to pick the file... it will still give error  that "MESSAGE NOT FOUND".
    but if i will change the file name while picking it will pick up the file... M not able to understand that y it is happening... can anyone help me in this plzzzzzzzzz....
    Let me know if any more information is required..
    Thanks in advance..
    Hetal

    Thanks Gaurav.
    You need to generate the files in sequence. I think EOIO should help you with this as it can help generated unique ID for messages in a Q.
    Response : in Message Monitoring
    Send binary file  "edw_lms_traininighist.txt" from FTP server "aixedistg:/ercot/data/xi/lms/outbound", size 171 bytes with QoS EO
    2008-10-27 11:59:16 Success RRB: entering RequestResponseBean
    2008-10-27 11:59:16 Success RRB: passing through ...
    2008-10-27 11:59:16 Success RRB: suspending the transaction
    2008-10-27 11:59:16 Success Application attempting to send an XI message synchronously using connection File_http://sap.com/xi/XI/System.
    2008-10-27 11:59:16 Success RRB: leaving RequestResponseBean
    2008-10-27 11:59:16 Success Trying to put the message into the call queue.
    2008-10-27 11:59:16 Success Message successfully put into the queue.
    2008-10-27 11:59:16 Success The message was successfully retrieved from the call queue.
    2008-10-27 11:59:16 Success The message status set to DLNG.
    Check if you see anything in logs. If nothing check the LOGGING_SYNC is 1 or not in SXMB_ADM
    Its already there in place.But still getting error.
    Thanks,
    Hetal

  • Sender File/FTP Adapter - Matching Input to Message Type

    Hi,
    I have a sender file/ftp adapter which is using content conversion to generate an XML document from the contents of a text file. This works fine and when I go into the SXI Monitor I can see the XML document I expect:
    <ns:DN_360BalanceExtract xmlns:ns="http://xxx">
    <ns:RN_360BalanceExtract xmlns:ns="http://xxx">
    <BalanceRecord>
       <SerialNo>xx10000780</SerialNo>
       <RegNo>A1</RegNo>
       <LocationTicketIssued>ALBERT ROAD SOUTH</LocationTicketIssued>
       <DateOfOffence>2008-02-15</DateOfOffence>
       <TimeOfOffence>13:38</TimeOfOffence>
       <OffenceDescription>xxx</OffenceDescription>
       <CurrentStateOfCase>RE-OPENED; CLOSED IN ERROR</CurrentStateOfCase>
       <OutstandingBalance>70.00</OutstandingBalance>
       </BalanceRecord
    <BalanceRecord>
       <SerialNo>xx90001245</SerialNo>
       <RegNo>S849KMR</RegNo>
       <LocationTicketIssued>ALBION PLACE</LocationTicketIssued>
       <DateOfOffence>2011-03-01</DateOfOffence>
       <TimeOfOffence>10:59</TimeOfOffence>
       <OffenceDescription>xxx1</OffenceDescription>
       <CurrentStateOfCase>xxx</CurrentStateOfCase>
       <OutstandingBalance>60.00</OutstandingBalance>
    </BalanceRecord>
    </ns:RN_360BalanceExtract>
    </ns:DN_360BalanceExtract>
    Having created the XML document from a text file I now wish to use the XML as input to a web service. This will of course involve mapping the XML document to a message in the inbound interface. Question is how do  associate the XML generated with a Message Type in the outbound interface. Do I need to make sure the Document or Recordset names match that of a Message Type ?
    Cheers,
    PaulC.

    Hi Paul
    The content conversion will create a document like that if you insert DN_360BalanceExtract as Document name, "http://xxx" as namespace.
    RN_360BalanceExtract will probably be your recordset, with its namespace.
    More information about content conversion on sender file adapter:
    http://help.sap.com/saphelp_nw04/helpdata/EN/ae/d03341771b4c0de10000000a1550b0/frameset.htm
    I'm not sure what you mean by bound. If you mean that PI has to execute mapping you created for that DN_360BalanceExtract message type, you need to associate DN_360BalanceExtract to a message interface and then create all configuration objects and choose that message mapping when you create the interface determination object.
    Regards,
    Giuseppe

Maybe you are looking for