Need information on sony MO disk CWO-1300B

I have some Sony M.O. Disk 1.3 GB 1024 byte/sector Write-Once disk that I need to read and print the information from.  I do not have the equipment and need to know which external disk drive i need to purchase and if i will need any additional software.
I do not know what format the data has been stored in, I'm guessing PDF.
Any help you could give me would be appreciated.
Sally

You will need to use MO drive to read and write information to MO disc. You may find more information from the below link: http://sony.storagesupport.com/taxonomy/term/23?page=1

Similar Messages

  • Need information about daily back using DB13

    Hi,
           Need information about how to take daily backup through t-code: DB13
           I clicked on 2days date and then there at Action Pad tab clicked FULL DATABASE ONLINE + REDO LOG BACKUP.
           Then from here what to do

    pandu babai,
    in db13 we take daily backups.
    u can schedule the job according to ur requirement timing.
    daily online, disk or tape.
    plus redo logs as copy, delete and save.
    after scheduling the tasks the backup will be started and internally the background jobs like SAP_SLD_DATA_COLLECT etc., are triggered.
    (After the DB13 backup)also in the same screen if we double click on the backup option we can check the job log, action log and detail log for the scheduled backup.

  • I am getting a warning need more space on my disk. I have checked the Console and there have been 4000 thousand messages in my system log in the last 2 days. I have emptied as many files as possible.

    Hi
    I am getting a warning on opening my mac saying I need more space as my setup disk is full.  I have emptied many files as well as my Trash.  I am planning to get an external drive for my photos, but it has been suggested that I check Console and under the system log the following message (of which they say 4000 messages have been logged in 2 days) '06/06/2014 16:08:23.341 com.apple.dynamic_pager: dynamic_pager: Need more space on the disk to enable swapping'.  This is a copy of one of the items.  It is from the system log.  I really do not think I have enough files to warrant this warning, with the exception of photos.  My storage shows 143 MB free out of 120.47. Thanks for any help.

    First off, no MacBook Air can run 10.3 or earlier.
    Secondly, are you sure you only have 143MB of storage free?  That's seriously low.  With MacBook Airs of 120 GB hard drives, or even 140 GB which is often the case when it says out of 120, you shouldn't allow your free space to go down below 20 GB.  MB is 1024 fold less than a GB.  So if you really have 143MB free on a MacBook Air, you are long past the minimum space you should be keeping it at, and need to start clearing a lot of space now*:
    http://www.macmaps.com/diskfull.html
    I'm asking this thread be moved to the MacBook Air forum,a as we can't say for certain what you have when you post in the 10.3 or earlier forum.

  • I need Information about Grid

    Hello,
    The first, i don't speak english very well.... ;)
    the company for which work has 3 seats now, but is going to open 5 more.
    All these seats are small, and the cost to install Oracle in each one of them is very elevated.
    i would like to know to me if Grid Computing can help me centralizing everything in a Seat. The scalability is something very important. and i need have several instances of BD oracle up...
    I need information...
    Yo can write me to [email protected]
    Thanks in advance

    Hi.
    By seat, I assume you mean site or location.
    It's difficult to answer this type of question as it depends on so many factors. Personally, I would always go for the centralized solution. This way you don't need to worry about replication or distribution of data. Those things are always a nightmare.
    RAC is great for high availability, and it will allow you to increase your horsepower as and when you need it, but you still need to consider your performance erquierments up front.
    Of course, centralization comes with it's own set of problems. Are you going to connect to the central server via the web, VPN, leased line? What happens when the connection is unavailable?
    There is just so much to consider...
    Cheers
    Tim...

  • I need information about personal experience with DFS-R: shortcomings and limitaions of DFS-R

    Hello,
    We plan to install DFS-R in our organization.
    I need information about personal experience with DFS-R: shortcomings and limitations of DFS-R.
    Thank you for any info. 

    Hi,
    You could refer to the articles below to see some limits about DFSR and some DFSR configuration mistakes which will cause DFSR problems:
    Understanding DFS Replication "limits"
    http://blogs.technet.com/b/filecab/archive/2005/12/12/understanding-dfs-replication-_2200_limits_2200_.aspx
    Common DFSR Configuration Mistakes and Oversights
    http://blogs.technet.com/b/askds/archive/2010/11/01/common-dfsr-configuration-mistakes-and-oversights.aspx
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • I need information about reports

    hi gurus,
      i need information about Trending reports and Management reports. Can any body provide me the scenario regarding this issues:

    Hi
    Trend reports are the reports which show a certain trend all over the years
    Say, Sales revenue for the year compared to all the previous years...This show what is the trend in the last few years
    Management reports high level reports with summarized data which helps in decision making. Say, Vendor performance report...this report shows list of default vendors by ranking them and management can decide to continue or not to continue with certain vendors
    Regards
    N Ganesh

  • I need information regarding the creation of Workbook and WAD.

    Hi,
    I need information regarding the How to create the Workbook and WAD.
    Can any one help me to get the information..
    Regards,
    Suman
    Edited by: Suman Reddy Vuyyuru on May 19, 2009 8:22 AM

    Hi,
    for workbook:
    [Queries in Workbook|http://help.sap.com/saphelp_sem40bw/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm]
    for WAD:
    [WAD for Beginners|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22]
    thnks.

  • I need  information  about  oops  concept  programming  in abap

    Hi  ,
    I need  information  about  oops  concept  programming  in abap
    Thanks,
    Asha

    Of course, the best place to start is help.sap.com.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
    There are a couple good books out there as well.  You can get them at www.amazon.com
    Regards,
    Rich Heilman

  • I need information on my bill, for the last two yrs, how do i go about looking for it

    i need information on my bill for the last two yrs, how i go about looking for it . thanks\

    The last 12 months' worth can be obtained via your on-line MyVerizon account; look under View Bill and use the drop-down to select the appropriate bill.  Anything prior to the past 12 months would need to be obtained via Customer Service; there is a charge (I believe $5 per copy, but I'm not sure).

  • I need information about Web dynpro ABAP Exception : ICF Service Node

    I need information about Web dynpro ABAP Exception :
    ICF Service Node "/sap/bc/webdynpro/sap/abcd/undefined" does not exist.
    Here abcd is application name.
    ICF Service Node exists and activated but kindly let me know from where "undefined" is coming .
    Please let me know your comments /views about  this.

    Hi,
    I think ur webdynpro service is not active after upgradation.
    You have manually activate it.
    Go go Tcode SICF,Execute the Initial screen,
    and in this new screen give service  as your application name and click on filter.
    You will get your service below which will be ur application name .
    right-Click on the deactivate and activate it or just activate it,.
    This shd work

  • I need information about ESS and Training and Work Experience

    I need information about ESS and Training and Work Experience.
    Anyone know if  there is something inside of the component ESS about Training and Work Experience (infotypes 22 and 23)?
    I appreciate information.
    Thanks.

    Marciano,
    check this documentation
    http://help.sap.com/saphelp_erp2005/helpdata/en/4d/c19ce6ef2842258283afc35a54172a/frameset.htm
    Thanks
    Bala Duvvuri

  • I'm a Microsoft Outlook for Mac user, I need information of how to know when e-mail was readed and confirm receipt of e-mails sent. thank you!  regards Mauricio

    I'm a Microsoft Outlook for Mac user, I need information of how to know when e-mail was readed and confirm receipt of e-mails sent. thank you!  regards Mauricio

    Mail and Address book

  • More than 1200 bad blocks do I need to change my Hard Disk

    Hi
    my hard disk on a Macbook pro has more than 1200 bad blocks do I need to change my Hard Disk
    Thanks for your help

    yousseffromlimoges wrote:
     my hard disk on a Macbook pro has more than 1200 bad blocks do I need to change my Hard Disk
    What software and version did you use to determine you had 1200+ bad blocks?
    Was it compatible with Lion?
    Run the scan again and take a screen shot of the results and make sure to save it to a external media and disconnect it, you will need this to perform a warranty call and have the drive replaced.
    After you have backed up your files to a external storage drive and disconnected it.
    Hold Command r upon rebooting and enter the Lion Recovery Partition and run Disk Utility, see if the drive needs repair. I suspect it does. Check the smart status too.
    Follow the
    Restoring OS X 10.7 (new drive, total reformat method)
    https://discussions.apple.com/message/16276201#16276201
    Also make a clone of your OS X Lion Partition on a external drive, this way your prepared if the drive dies, you can option boot off the clone. If you get a new drive you have a copy of Lion Recovery on the USB.
    It's highly unusual for a drive to have 1200+ bad blocks, the Zero Erase Free Space will confirm it as it's going to use up all your spare blocks.
    The drive will likely brick, which you then can option boot off the clone.
    Schedule a Apple warranty/AppleCare call if your under it, or order a new drive online from OtherWorld Computing "kits", iFixit for videos or other Mac places online.
    http://eshop.macsales.com/installvideos/
    You can read my link provided how to format the drive.
    However if your Zero Erase Free Space turns out fine, then I suspect the software you used or perhaps something else is wrong with your OS X not correctly reporting your drives data characteristics correctly.
    You could be spared a costly repair if that's the case.
    Good Luck.

  • I took the system file out of the system folder on os 9.2 can't boot to put file back in machine also has osx 10.2 but won't let me boot to either need os 9 compatible boot disk I think?

    I took the system file out of the system folder on os 9.2 can't boot to put file back in machine also has osx 10.2 but won't let me boot to either need os 9 compatible boot disk I think?

    If the OS X 10.2 on the hard drive is/was bootable, try this -
    Restart or boot, then immediately press the X key, keep it held down until you know the machine has started to boot using OS X. This is a hardware instruction to the Mac to boot using the first usable instance of OS X it finds.
    Once booted to OS X, you should be able to move OS 9's System file into OS 9's System Folder.
    Note - in general, unless you know for sure what you are doing and that the results are desired, do not relocate or rename files in OS 9's System Folder or in OS X's System or Library folders.

  • Need information about "Activation Task"

    Hi at all
    I need information about "HOW" the activation task work. I try to found information on Metalink and I can't found anything. Who anyone show me where I can find this information?
    The information from Design Studio are not enough.
    Thanks in advice
    Luis
    Edited by: Luis_ITA on 9-giu-2011 10.35

    Hi Luis,
    Following are the resources you can use to seek information about Activation Tasks:
    1. Following link is from OU that provides an overview of the Activation Task:
    http://ilearning.oracle.com/ilearn/en/learner/jsp/rco_details_find.jsp?srchfor=1&rcoid=920335765
    2. Design Studio Online Help provides comprehensive description about the task – what is it, how to use it, different compensation modes etc.
    Thanks,
    Deepankar (Deep) Dey
    OSM- Product Management

Maybe you are looking for

  • Remote Access VPN connecting but not passing traffic

    I have a remote access VPN configured on a device here. I'm able to connect a device and it assigns me an IP address out of the pool, and injects the routes to its local network, but I'm not able to pass any traffic through the VPN and none of the IP

  • A password manager for Midori

    Hello to everyone, being a would-be Midori user that lacks a password manager, some time ago I made a script that worked as a password manager. Now I've made a Midori extension for this task and made it available on AUR http://aur.archlinux.org/packa

  • Two output type

    Hi Gurus, I've a typical issue here. I've two output types for sales order .Maintain condition record ,access sequence,VOFM routines individually perfectly for both output types. 1st output type - no multiple issue..(maintained in NACE) 2nd output ty

  • COMMIT BAPI Problems

    hi we have implemented VC on Ep6.0 SP2 pacth 27. when we try to create a model using BAPI_BANK_CREATE and BAPI_TRANSACTION_COMMIT with input forms for BANK_CTRY and BANK_KEY and also an input form for BANK ADDRESS the following is the problem we face

  • Refurbishment process - want to repair material from another plant

    Hello All, In a Refurbishment process, we can do repair either Internal resource(control key PM01) or with External resource(control key PM02) by sending out material to vendor with material outward slip. But in my case, i have to send material to my