Need Information to Configure MIbs in 5508 Controllers

Question

Hi All,
I Need to Know few informations about Mibs, we are  onboarding devices to HP NNM Tool for monitoring purposes. we have 10 wireless controllers.. We need to enable following traps for AP to pull from tool.
for the below traps to be enabled what are all the traps have to be enabled in controller ?? we have 4400 & 5500 series controllers.
I seen WLC -> SNMP -> trap control , lots of option, i need to clarify 2 thigs
1) whether this is the place ( WLC->SNMP->Trap control) where  we need to enable traps for the below Alerts.
2) if so, what are all the options need to be enabled for Below traps in (general/Ap/CLient/Security/Auto RF/Mesh)
Waiting for your inputs
SN
Trap
Oid
Sev
Trap Type
1
APAssociated
.1.3.6.1.4.1.14179.2.6.3.7
Normal
Access point Traps
2
APCoverageProfileFailed
.1.3.6.1.4.1.14179.2.6.3.14
Major
Access point Traps
3
APDisassociated
.1.3.6.1.4.1.14179.2.6.3.8
Major
Access point Traps
4
APDown
.1.3.6.1.4.1.14179.2.6.3.6
Critical
Access point Traps
5
APIfDown
.1.3.6.1.4.1.14179.2.6.3.10
Major
Access point Traps
6
APIfUp
.1.3.6.1.4.1.14179.2.6.3.9
Normal
Access point Traps
7
APInterferenceProfileFailed
.1.3.6.1.4.1.14179.2.6.3.13
Major
Access point Traps
8
APLoadProfileFailed
.1.3.6.1.4.1.14179.2.6.3.11
Major
Access point Traps
9
APLoadProfileUpdatedToPass
.1.3.6.1.4.1.14179.2.6.3.37
Normal
Access point Traps
10
APNoiseProfileFailed
.1.3.6.1.4.1.14179.2.6.3.12
Major
Access point Traps
11
APRadioCardRxFailure
.1.3.6.1.4.1.14179.2.6.3.73
Major
Access point Traps
12
APRadioCardRxFailureClear
.1.3.6.1.4.1.14179.2.6.3.74
Normal
Access point Traps
13
APRadioCardTxFailure
.1.3.6.1.4.1.14179.2.6.3.71
Major
Access point Traps
14
APRadioCardTxFailureClear
.1.3.6.1.4.1.14179.2.6.3.72
Normal
Access point Traps
15
APUp
.1.3.6.1.4.1.14179.2.6.3.5
Normal
Access point Traps
16
ApHasNoRadioCards
.1.3.6.1.4.1.14179.2.6.3.60
Major
Access point Traps
17
SensedTemperatureTooHigh
.1.3.6.1.4.1.14179.2.6.3.43
Critical
Access point Traps
18
SensedTemperatureTooLow
.1.3.6.1.4.1.14179.2.6.3.44
Critical
Access point Traps
19
TemperatureSensorFailure
.1.3.6.1.4.1.14179.2.6.3.45
Critical
Access point Traps

Answer 1

I can tell you one thing cause your question is kind of crypto to me.
You can download the whole mib file for the current image running on your controller from the download software section on cisco site.
Also you can use the SNMP Object navigator on cisco site to look for whatever you want.
And if it is  urgent open TAC case cause we are responding on best effort.
Please make sure to rate correct answer