Need information to have 2 applications accessing one UCM server
Hi,
I need help to configure the second application in my UCM which has already one application connected to database and weblogic server.I have to develop another individual application which runs on different weblogic server and shares same database but with different schema.How can I connect to UCM to configure second application, any help or steps to configure is appreciated.
Thanks,
Rama
What kind of application are you wanting to connect?
The documentation includes a complete API guide for reference.
Similar Messages
-
You don't have permission to access ** on the server, HELP please
For the last months I've been working with Muse and updating my website through Muse without any problems.
I use my extern HTML for update pages in Muse, and usually this went without any problems too.
But if I test my new update, when I want to download a specific clip, it says: "You don't have permission to access ** on this server."
The files are in the correct place on my FTP, the link is correct and when I open the specific link in my browser without using my website, I CAN download the file.
How is it possible that this suddenly doesn't work anymore? Last time I updated this way was one week ago - without any problems.
Can anyone help, seeing I have done everything I usually do, and everything is in the correct place and the link does work.
ThanksIn my case I have to close/quit Muse. Then re-open the program. For me the problem goes away. This only happens occasionally.
-
I can normally access Firefox with no problem. Now when I try to connect to Firefox I see an error message that says: FORBIDDEN You don't have permission to access/on this server. What's up with that? How do I fix it?
Maybe the server is down for maintenance or updating.<br />
Can you post a link? -
403 forbidden you don't have permission to access / on this server Error
I just deployed my server 2012 & exchange 2013. Serv#1 domain name is xyz.com. and Serv#2 exchange server: mail.xyz.com. My server is also hosting DHCP Server. After installing the servers, every time when i go to
my website - www.xyz.com (it is hosting by third party Webmaster) it give me error message: 403 forbidden you don't have permission to access / on this server Error. What can I do to result this problem.
Thank you for your help.
Cnet3383Jim,
Thank you very much for responding on my question. My website is working fine. It only has problem with the segment of network within server 2012. And also, I found out that as soon as I stop the DNS server then i can access my website
without any problem. I am very sure the problem in the setting of my DNS Server. I have all A records are pointing out to internal private ip to Server 2012, Exchange Server, and also external ip to exchange server, and website. Here
is my DNS Mgr setting:
(Same as parent folder) Start of Authority (SOA) (204),serv.xxx.com,hostmaster.xxx.com Static
(Same as parent folder) Name Server Serv.XXX.com
Static (Server 2012 Name)
(Same as parent folder)
Host (A)
173.xxx.xxx.19 Static (Public IP)
(Same as parent folder) Host(A)
10.1.8.1 Static (Private IP)
(Same as parent folder) Host(A)
98.xxx.xxx.83 Static (My website public IP)
(Same as parent folder)MailExchange (MX)
Mail.XXX.com
Static
serv
Host(A)
10.1.8.1
Static
Mail Host(A)
10.1.8.10 Static
Please, let me know if you can figure out what is the problem.
Thank
Cnet3383 -
You don't have permission to access / on this server.403 forbidden
ou don't have permission to access / on this server.403 forbidden
Jim,
Thank you very much for responding on my question. My website is working fine. It only has problem with the segment of network within server 2012. And also, I found out that as soon as I stop the DNS server then i can access my website
without any problem. I am very sure the problem in the setting of my DNS Server. I have all A records are pointing out to internal private ip to Server 2012, Exchange Server, and also external ip to exchange server, and website. Here
is my DNS Mgr setting:
(Same as parent folder) Start of Authority (SOA) (204),serv.xxx.com,hostmaster.xxx.com Static
(Same as parent folder) Name Server Serv.XXX.com
Static (Server 2012 Name)
(Same as parent folder)
Host (A)
173.xxx.xxx.19 Static (Public IP)
(Same as parent folder) Host(A)
10.1.8.1 Static (Private IP)
(Same as parent folder) Host(A)
98.xxx.xxx.83 Static (My website public IP)
(Same as parent folder)MailExchange (MX)
Mail.XXX.com
Static
serv
Host(A)
10.1.8.1
Static
Mail Host(A)
10.1.8.10 Static
Please, let me know if you can figure out what is the problem.
Thank
Cnet3383 -
Can I have multiple computers accessing one iTunes library simultaneously?
I've purchased a Lacie Network HD that I'm keeping all of my iTunes on. I've put an alias to the iTunes library from that drive in the music folders of the computers I want to access and update it. That all works well. The only problem is that both computers cannot have iTunes running at the same time. I get an error stating that the library is locked. It would appear that I can't have multiple computers accessing the library at the same time. Is there a work around for this aside from doing network sharing via iTunes? The reason I don't want to do that is that I want both computers to have access to the actual files if I'm using the various iLife apps that use iTunes.
Scott
The only problem is that both computers cannot have iTunes running at the same time. I get an error stating that the library is locked. It would appear that I can't have multiple computers accessing the library at the same time
This is true. It's not a server app.
The nearest thing would be a library file on each machine pointing to the same set of music files. However, you might have problems if both machines try to access a particulat track at the same time. Also, changes made on one machine would not be reflected in the other. So if you rip a CD on one, the files will also have to be 'imported' to the other.
Regards
TD -
Mac Book-Need assistance. I can not access one specific internet site
I'm unable to access one specific web site without clearin all history each time I access. I dont have this problem accessing any other website. My system is too old for Apple support. Has anyone experienced this before? Thank you
Hi shldr2thewheel. the option you provided says the site is up. I still receive the message that Safari can reach the server. I have checked w/th site owner and the isp and they say to contact the manufacturer. I'm stumped. do you have another suggestion? Thank you
-
Cannot access one specific server
Hi!
I'm using an eMac G4 to manage my website, very simple (Wordpress + images). I had no problems until last week, when my hosting company turned out some FTPs to prevent massive usage of other users. I tried to upload some files to my FTP and tried to send some emails with an associated account to that site but I couldn't. When my hosting company solved the problem I could access the FTP and download my email, but I could not upload anything nor send emails with attachments.
I thought it was my Internet connection, but it wasn't as I could upload files with a PC connected to the same DSL. I can use it with no problems with any other computer but my eMac. Besides, it's the only FTP I'm having trouble too.
I flushed my DNS and no changes. I introduced manually my DNS and no changes. I renewed my IP as I have dynamic IP and no changes. I checked if I got a firewall and no firewall. My hosting company doesn't know what to tell me and I don't know what to do.
Any clue on what might be happening?Hi again!
The problem remains. I upgraded to Tiger and I cannot upload files to ONLY ONE specific server. As the hosting company told me my IP address is not blocked from the server (and I have dynamic IP, so it doesn't matter), I pressume it is some kind of problem of my Network configuration. However, I don't know what to do.
Could it be my OSX be blocking uploading information to one specific server? Is there any "black list" or something at any plist?
It's really, really frustrating. Any ideas? -
Multiple versions of an application on one Forms Server
Is it possible to have multiple versions of an application available via one Forms Server?
We have a DEV, TEST and PROD version of an application and we would like to have the versions seperate on one Forms Server.
Would this be possible using any other Oracle tools (Portal)?
Thanks for your help.Yes, all you have to do is create a batch file which sets the env variables you want and also starts up the forms listener on a different port. This way you can have a forms listener on e.g.
Port 9000 With Forms60_Path - c:\temp
Port 9001 With Forms60_Path - c:\Production
Port 9002 With Forms60_Path - c:\test
That way you will pick up different files as well.
Regards
Grant Ronald. -
I have changed my password, i have even changed my email address, then i re enter to the icloud and i still get this other persons information come up on my phone, i am worried that they have got all my photos an contact details... Or deleted all of mine so i have now lost all my information... I dont have the photo sharing on or have anyone else use my id..
Please help i dont want this persons stuff or the thought that they have invaded my privacy and can see my personal stuff..
Really put off the iphone now :( only had a month wish id stayed with a blackberry!First of all, you should always save you photos on computer like any other digital camera.
Backup on iCloud or iTunes only backup your Camera Roll. The other photos should be already on the computer.
Note: Photos are not saved in iTunes, it's only a conduit between your iPhone and your photo managing software on computer.
What computer do you have? -
Have issue for access internal RDP server
Hi All
Problem again. Hope you all can help to solve.
I have internal server 10.200.13.1 for RDP access. But base on below config not are work.
Also if bypass this firewall can work.
: Saved
ASA Version 8.2(5)
hostname mkofficefw01
enable password XwzHd4VCVqrxvrzG encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
nameif HGC_BB
security-level 0
ip address 10.10.10.1 255.255.255.0
interface Ethernet0/1
description MK_Office_206
nameif MK_206
security-level 100
ip address 10.206.0.253 255.255.254.0
interface Ethernet0/2
description MK_Office_207
nameif MK_207
security-level 100
ip address 10.207.0.253 255.255.255.0
interface Ethernet0/3
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 172.32.1.1 255.255.255.0
management-only
ftp mode passive
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
access-list mk206_inside extended permit ip any any
access-list mk207_inside extended permit ip any any
access-list HGC_outside extended permit ip any any
access-list inside_nat_206_outbound extended permit ip any 10.206.0.0 255.255.254.0
access-list inside_nat_206_outbound extended permit ip 10.206.0.0 255.255.254.0 10.207.0.0 255.255.255.0
access-list inside_nat_206_outbound extended permit ip 10.206.0.0 255.255.254.0 10.201.0.0 255.255.0.0
access-list inside_nat_206_outbound extended permit ip 10.206.0.0 255.255.254.0 10.202.0.0 255.255.0.0
access-list inside_nat_206_outbound extended permit ip 10.206.0.0 255.255.254.0 10.204.0.0 255.255.0.0
access-list inside_nat_206_outbound extended permit ip 10.206.0.0 255.255.254.0 10.205.0.0 255.255.0.0
access-list inside_nat_206_outbound extended permit ip 10.206.0.0 255.255.254.0 10.210.0.0 255.255.0.0
access-list inside_nat_206_outbound extended permit ip 10.206.0.0 255.255.254.0 10.200.13.0 255.255.255.0
access-list inside_nat_207_outbound extended permit ip any 10.207.0.0 255.255.255.0
access-list inside_nat_207_outbound extended permit ip 10.207.0.0 255.255.255.0 10.200.0.0 255.255.0.0
access-list inside_nat_207_outbound extended permit ip 10.207.0.0 255.255.255.0 10.201.0.0 255.255.0.0
access-list inside_nat_207_outbound extended permit ip 10.207.0.0 255.255.255.0 10.202.0.0 255.255.0.0
access-list inside_nat_207_outbound extended permit ip 10.207.0.0 255.255.255.0 10.204.0.0 255.255.0.0
access-list inside_nat_207_outbound extended permit ip 10.207.0.0 255.255.255.0 10.205.0.0 255.255.0.0
access-list inside_nat_207_outbound extended permit ip 10.207.0.0 255.255.255.0 10.210.0.0 255.255.0.0
access-list inside_nat_207_outbound extended permit ip 10.207.0.0 255.255.255.0 10.206.0.0 255.255.254.0
pager lines 24
logging asdm informational
mtu HGC_BB 1500
mtu MK_206 1500
mtu MK_207 1500
mtu management 1500
icmp unreachable rate-limit 1 burst-size 1
icmp permit any HGC_BB
icmp permit any MK_206
icmp permit any MK_207
no asdm history enable
arp timeout 14400
global (HGC_BB) 1 interface
nat (MK_206) 0 access-list inside_nat_206_outbound
nat (MK_206) 1 10.206.0.0 255.255.252.0
nat (MK_206) 10 0.0.0.0 0.0.0.0
nat (MK_207) 0 access-list inside_nat_207_outbound
nat (MK_207) 1 10.207.0.0 255.255.255.0
nat (MK_207) 10 0.0.0.0 0.0.0.0
access-group HGC_outside in interface HGC_BB
access-group mk206_inside in interface MK_206
access-group mk207_inside in interface MK_207
route HGC_BB 0.0.0.0 0.0.0.0 10.10.10.2 1
route MK_206 10.200.0.0 255.255.0.0 10.206.0.254 1
route MK_206 10.201.0.0 255.255.0.0 10.206.0.254 1
route MK_206 10.202.0.0 255.255.0.0 10.206.0.254 1
route MK_206 10.204.0.0 255.255.0.0 10.206.0.254 1
route MK_206 10.205.0.0 255.255.0.0 10.206.0.254 1
route MK_206 10.210.0.0 255.255.0.0 10.206.0.254 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
telnet 10.0.0.0 255.0.0.0 management
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 HGC_BB
ssh 10.0.0.0 255.0.0.0 management
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
username maxline password AxVGTgY4NjA2d3H8 encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
inspect icmp error
service-policy global_policy global
prompt hostname context
call-home reporting anonymous
Cryptochecksum:c8df6eda8684cac25cc5a0e927f9b39a
: end
Thank for your help !!!
JackyFrom which IP are you trying to access it?
Also what's the IP address you are putting into the RDP session? The real IP address for the server?
For Networking Posts check my blog at http://www.laguiadelnetworking.com/category/english/
Cheers,
Julio Carvajal Segura -
You don't have permission to access / on this server.
Hello.
I was looking all around internet (seems like that..) and can't find right decision yet.
I try to change permissions and edit httpd.conf (add ServerName string corresponding with my domain name), but, unfortunately, I has no way how to solve this problem.
I have this string in my logs:
25.11.11 0:19:10,134 org.apache.httpd: httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
And after this, I have another problem - I still can't find, how to add mail account in mail service (create new mailbox for my domain name).
Mac OS X 10.7.2 Lion Server (11C74).
I'm really hope, that mac community can help me find answer or way to solve this problems.
Thank you.I try this:
Activate All User Accounts
Navigate to the Apache2 user configuration directory:
cd /private/etc/apache2/users
Now, we’ll open a new document:
sudo tee local.conf
Then, copy and paste the following into terminal:
# Allow access to all users' Sites directory for web clients.
<Directory "/Users/*/Sites/">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
Then press Control-D to close the tee session.
Restart the Apache daemon:
sudo apachectl restart
But nothing happen.. -
403 forbidden: You don't have permission to access / on this server.
I have just uploaded new files to the web server and I get the following message.
Is there a reason for this?
Apache/2.2.9 (Debian) PHP/5.2.6-1+lenny9 with Suhosin-Patch mod_ssl/2.2.9 OpenSSL/0.9.8g Server at www.cambridgekids.es Port 80403 is usually a .htaccess problem. The site has been password protected.
In your Files panel choose remote view then click at the top right where the three lines are and select show hidden files. it should show a .htaccess file in there somewhere. highlight it and right click. choose Set Permissions and set it to read writr and execute for all. Then delete it. Check your root folder to be sure your index file is in there and it shoudl work. -
Forbidden - you don't have permission to access / on this server
I get this message when I try to access ebay. I also get a screen in Japanese, both on the home page and sometimes when I try to bid on an item. Sometimes it works fine. Is this firefox or the website?
In my case this was cause by the proxy "invisible.disconnect.me" that was installed by the Disconnect Search extention...
-
Necesito solucionar el problema ya que debo ingresar calificaciones en mozilla y me sale ese error.
¿Que ministerio? ¿Puedes compartir con nosotros la dirección a la que accedes que te está mostrando ese mensaje?
Maybe you are looking for
-
Hi, I'm having problems with a WSUS configured on a Windows Server 2012 R2. The computers take and install the updates but in console they appear as Not reported yet (different type of operation system - Windows 7, 8, 8.1, Server 2008, 2008R2, 2012 a
-
Garageband stops recording after switching to another app?
When ever I start recording a session in Garageband - using the built in mic or an external one - and double tap (multitasking) my way to app, iOS indicates in a red top bar that it is still recording. Actually it is not. You can see the red status
-
Should I have to explicitly install CA certs that are already preinstalled in iOS?
Hi all, I'm trying to understand how iOS deals with certificates and I'm wondering if anyone can explain a few things to me. I'm working on a system that would provide users with a personal identification certificate for authentication to various ser
-
Can i get memory map to work on my 5800 ?
the instructions say your phone must have windows sync 3.7 (iirc) and you can plug in mobile and get it working. i have all the software on my comupter but it cant see my phone
-
I used below XdoLoader to download rtf file. Script ran successfully, but rtf file was not download. I ran this in unix home directory. Please advice. java oracle.apps.xdo.oa.util.XDOLoader DOWNLOAD -DB_USERNAME apps -DB_PASSWORD welcome -JDBC_CONNEC