Need infotype along with field name

Dear Experts,
Can anyone please tell me the Infotype & Field name from where the following fields can be fetched.
Location
Designation
Department
Division
company
Date of joining
date of confirmation
gross salary(if yes which salary type i have to select).
Please tell me soon as i need to finish the development.
Kind Regards
Sajid

Hi Sajid,
Requested information is found in IT0001 and IT0041.
Location :    PA0001-WERSK or PA0001-BTRTL
Designation : PA0001-PLANS
Department : PA0001-ORGEH
Division       : May be PA0001-WERKS
company    : PA0001-BUKRS
Date of joining     : PA00041
date of confirmation : PA0041
gross salary(if yes which salary type i have to select).
Get the confirmation from your Functional consultant.. He is the best person to give you the accurate information.
Regards,
Narendra.

Similar Messages

Is there a dialing app which places icons on the screen along with the name being called?

Does anyone know of an app which places a limited number of phone numbers along with the name of the person being called on the screen of the iPhone? Our grandfather is 95 years old, and can not operate the small buttons on most cell phones, and has trouble navigating around the phone to make calls. We just want 3 phone numbers displayed, along with who is being called, so he does not have to navigate to anything except the main screen. Thanks.

http://itunes.apple.com/us/app/icon-project-home-screen-icon/id434277910?mt=8

Creating a view on KONA & KONH - Failed with 'Field name DATAB not unique'

Hi all,
    I am creating a view on KONA (Rebate Agreement) & KONH (Conditions Header) tables. The link is KONA-KNUMA = KONH-KNUMA_AG.
   The field 'DATAB' exists in both tables and I have included those two fields under 'View Fields' . When I tried to activate the View, it fails with 'Field name DATAB not unique'.
   The following is the complete error message:
Message no. MC060
Diagnosis
When you define aggregates (views, lock objects or matchcode objects), you can assign the aggregate fields your own names (the system assigns names to the basic fields automatically). These names must be unique.
System response
The system has established that the names assigned to the aggregate fields in an aggregate definition are not unique and issues an error message.
Procedure
Assign unique names to the aggregate fields in question.
   Why I am not able to create the view after including a field that EXISTS in two tables, PLEASE ?
Thanks,
Venkat.

Hi,
you can include both fields (but what for??); most likely KNUMH will also complain after fixing DATAB (just a guess...).
You can include both fields if you name them differently (different aliases):
In the view fields tab, enter two different names in the column "view field".
this will work.
hope this helps...
Olivier.
Message was edited by:
        Olivier Cora

FBA user's displaynames showing along with membership name.

Hi All,
Am using SharePoint 2010 site configured with both windows and Forms based authentications,
Now when i logged in to the site with FBA user it shows the display name along with membership providers name,
like this "i:0#.f|testuserprovider|Testuser1".
Here the 'testuserprovider' is the membership provider name and 'Testuser1'
is the excat FBA username.
Previously it was displayed correctly as only the displayname but from today it showing name along with membership name, suddenly it happened. can anyone tell what would the problem and excat solution for this.
Regards,
karthick.

Hi,
Please check the link
http://sharepoint.stackexchange.com/questions/35412/changing-users-displayname-isnt-permanent-i0-f-issue
http://blog.tylerholmes.com/2011/03/awkward-usernames-courtesy-of-claims.html
Please remember to click 'Mark as Answer' on the answer if it helps you

Tcodes used along with terminal name

Dear Experts
Please provide TCode by which i can see all the tcodes used by particular User in specific time interval along with terminal name
Thanks in advance
Raj

Hi,
You can see the all hole day, week and month wise tcode detail(run by user) through TCode: st03n
Double Click on day,week or month
then dragdown bottom menu User and Settlement double click "User Profile"
Right Side you will see Users --- Go in perticular User -- Double Click on User detail for All running tcode by perticular user.
Regards,
Gokul Chandola

.PDF file transfer(SAP XI ) along with file name to SAP R3

I would like to transfer a .PDF file along with its file name to target system.I need to have target structure like,
<Target>
    <field1>
    <Field2>
/Target>
Field1should be mapped to file name( i can do this by using dynamic configuration and a UDF).
Field 2 should me mapped to .PDF imae (.ie) i need tp pass the whole image to one target field
How can i do this.
Please suggest.

Hi as mentioned by you the structure is
<Target>
    <field1>
    <Field2>
</Target>
Field 1 Contains The dynamic File name UDF
Just make This File name which is sent Thru Source side as "Filename.PDF" to be passed to the target end
For example If the File name is XYZ
Field 1 has XYZ--
Pass The Field 2 as "XYZ.pdf" (i.e. File name Followed By .pdf as extension(Field1.pdf))

Save the PDF Form with Field Name

HI Guys,
I have the Requirment in PDF Form.The PDF Form is generated with the Adobe Live Cycle Designer.After generating the PDF Form the user filled the details in the form and save the filled form.while clicking the Save button the default PDF name is displayed in the File name box.The Requirement is iam having one field in the form.The Field name value should needs to displayed in the File name box during saving.Is it possible.Once its possible please let me know.This is needs to be delivered very shortly.
Thanks & Regards,
SatheshKumar R

You can save the form with name generated from a field's value, but therefore you will have to install a folder level script first and design a custom save button in your form.
You cannot do this with the applications save or save as... buttons, and you also cannot rename a file on submit.
Here's an example form and a folder level script. (Maybe to complicated fdr newbies)
http://thelivecycle.blogspot.com/search/label/Save

CFUPDATE problem with field name beginning with a number

I have a form (actually several) that is gathering data for a survey. I tried to use cfupdate to update the data elements and got a string index out of range error. I tested again without the form fields that began with numbers and it worked just fine. I then tried to enclose the offending field names in () and []. Both times I got same error. Does anyone have a work around for this? The code and error are below.
Changing the field names is not really an option. This survey has almost 400 data points and most of the fields begin with the question number.
Thanks
DW
<cfupdate datasource="#application.fdp_datasource#" tablename="arra_survey1" dbtype="ODBC" formfields = "entry_no, 2_a_fy09, '2_a_fy10', '2_a_fy11', '2_a_fy12', '2_b_fy09', '2_b_fy10', '2_b_fy11', '2_b_fy12', '2_c_fy09', '2_c_fy10', '2_c_fy11', '2_c_fy12', '2_d_fy09', '2_d_fy10', '2_d_fy11', '2_d_fy12', '2_e_fy09', '2_e_fy10', '2_e_fy11', '2_e_fy12', '2_f_fy09', '2_f_fy10', '2_f_fy11', '2_f_fy12', '2_g_fy09', '2_g_fy10', '2_g_fy11', '2_g_fy12', '2_h_fy09', '2_h_fy10', '2_h_fy11', '2_h_fy12', '2_i_fy09', '2_i_fy10', '2_i_fy11', '2_i_fy12', '2_j_fy09', '2_j_fy10', '2_j_fy11', '2_j_fy12', '2_k_fy09', '2_k_fy10', '2_k_fy11', '2_k_fy12', '2_l_fy09', '2_l_fy10', '2_l_fy11', '2_l_fy12', central_office, dept_office, incl_other, 3_a_fy09, 3_a_fy10, 3_a_fy11, 3_a_fy12, 3_b_fy09, 3_b_fy10, 3_b_fy11, 3_b_fy12, 3_c_fy09, 3_c_fy10, 3_c_fy11, 3_c_fy12, 3_d_fy09, 3_d_fy10 3_d_fy11, 3_d_fy12, 3_e_fy09, 3_e_fy10, 3_e_fy11, 3_e_fy12, 3_f_fy09, 3_f_fy10, 3_f_fy11, 3_f_fy12, 3_g_fy09, 3_g_fy10, 3_g_fy11, 3_g_fy12, 3_h_fy09, 3_h_fy10, 3_h_fy11, 3_h_fy12, 3_i_fy09, 3_i_fy10, 3_i_fy11, 3_i_fy12, 3_j_fy09, 3_j_fy10, 3_j_fy11, 3_j_fy12, 3_k_fy09, 3_k_fy10, 3_k_fy11, 3_k_fy12, 3_l_fy09, 3_l_fy10, 3_l_fy11, 3_l_fy12">
String index out of range: -2
The error occurred in C:\Inetpub\wwwroot\directory\process_arra_suvey_2.cfm: line 12
12 : <cfupdate datasource="#application.fdp_datasource#" tablename="arra_survey1" dbtype="ODBC" formfields = "entry_no, 2_a_fy09, '2_a_fy10', '2_a_fy11', ...

I think you have run one of CFUPDATE's limitations. I am not 100% certain, but I do not think cfupdate provides a way to escape invalid column names like yours. In which case you may need to do a regular UPDATE within a cfquery instead... or rename your columns.
fields that began with numbers
Most databases discourage creating column names that start with a number (or other restricted characters). While many databases will allow you to escape invalid names, it is simpler all around to avoid them altogether. Otherwise, you may have to escape the names in every single query. The recommendations vary, but usually object names that begin with a letter, and contain only letters, numbers and underscores are considered safe.
This survey has almost 400 data points and most of the fields begin with the question number.
Four-hundred (400) is a lot of columns for a single table. The fact that they all them seem to contain the same type of information (ie response to a question) is an indication that data should probably be stored in a separate table, as rows, not columns. For example questions could be stored in one table, possible answers in another, and the results of an individual test/survey stored in a third table. A structure like that is much easier to query, can easily accommodate changes (add/remove questions, responses, etcetera) without having modify the table every time.

Along with subtotal name display

how to display vendor name along with subtotals...?
my ALV report (using function modules, choice for LIST and GRID) subtotals needs to display..
the code is :
       ls_sort                    TYPE slis_sortinfo_alv.
*-- Level 1
CLEAR ls_sort.
ls_sort-fieldname = 'LIFNR'.
ls_sort-spos      = 1.
ls_sort-up        = 'X'.
ls_sort-subtot    = 'X'.
APPEND ls_sort TO vt_sort.
*-- Level 2
CLEAR ls_sort.
ls_sort-fieldname = 'EBELN'.
ls_sort-spos      = 2.
ls_sort-up        = 'X'.
ls_sort-subtot    = 'X'.
CLEAR ls_sort.
ls_sort-fieldname = 'DMBTR'.
ls_sort-spos      = 3.
ls_sort-up        = 'X'.
ls_sort-subtot    = 'X'.
APPEND ls_sort TO vt_sort.
plz help me...

Hi,
This is sample coding for subheadings and with sub totals.
REPORT YMS_TESTALV .
TYPE-POOLS: SLIS.
DATA: REPID LIKE SY-REPID,
      X_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
      IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
      L_LAYOUT type slis_layout_alv,
x_events type slis_alv_event,
      it_events type slis_t_event with header line. "SLIS_T_EVENT.
DATA: BEGIN OF ITAB OCCURS 0,
      VBELN LIKE VBAK-VBELN,
      POSNR LIKE VBAP-POSNR,
      MALE type i,
      female type i,
PLANE(10),
ACTUAL(10),
PLANE1(10),
ACTUAL1(10),
      END OF ITAB.
START-OF-SELECTION.
REPID = SY-REPID.
SELECT VBELN POSNR FROM VBAP UP TO 20 ROWS INTO TABLE ITAB.
X_FIELDCAT-FIELDNAME = 'VBELN'.
X_FIELDCAT-SELTEXT_L = text-020.      "'Planned cost'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 1.
X_FIELDCAT-OUTPUTLEN = 10 .
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'POSNR'.
X_FIELDCAT-SELTEXT_L = text-053.      "'Actual cost '.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 2."1.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'MALE'.
X_FIELDCAT-SELTEXT_L = 'MALE'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 3.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'FEMALE'.
X_FIELDCAT-SELTEXT_L = TEXT-T01.        "'FEMALE'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 3.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
it_events-NAME = SLIS_EV_TOP_OF_PAGE.
it_events-FORM = 'TOP_OF_PAGE'.
APPEND iT_EVENTS.
CLEAR it_events .
L_LAYOUT-NO_COLHEAD = 'X'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
          I_CALLBACK_PROGRAM = REPID
          IS_LAYOUT = L_LAYOUT
          IT_FIELDCAT = IT_FIELDCAT
          it_events = it_events[]
          TABLES
          T_OUTTAB = ITAB
          EXCEPTIONS
          PROGRAM_ERROR = 1
          OTHERS = 2.
         IF SY-SUBRC <> 0.
          MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
         ENDIF.
FORM TOP_OF_PAGE.
*-To display the headers for main list
FORMAT COLOR COL_HEADING.
        WRITE: / SY-ULINE(143).
        WRITE: / SY-VLINE,
        (8) 'LAST YEAR' ,
        SY-VLINE,
        (10) ' ' ,
        SY-VLINE,
        (19) 'CURRENT YEAR'(020) centered,
        (19) 'CURRENT YEAR'(020),
        sy-vline.
        WRITE: / SY-VLINE,
        (8) 'PLANE'(053) ,
        SY-VLINE,
        (8) 'ACTUAL'(054) ,
        SY-VLINE,
        (8) 'MALE'(056) ,
        sy-vline,
        (9) 'FEMALE'(057) ,
        sy-vline.
FORMAT COLOR OFF.
ENDFORM.
Thanks,
Shankar

Cfpdfform issue with field name

We have a pdf that is filled out by ColdFusion using <cfpdfform>. A field in the pdf was named incorrectly so there are 2 fields named the same thing (let's say "field1"). As the system has populated (many) copies of the pdf the same value has gone into both fields named "field1" when really two different values should have gone into a "field1" and "field2".
I need to get the information correctly entered into "field2" so I had two ideas...
I researched was renaming the field in all the pdfs using ColdFusion (so I could repopulate the new field) but that does not appear to be possible. But to confirm... Can you rename a field in a pdf using ColdFusion?
If I couldn't rename it I just wanted to change what was in the second occurrence of "field1". I tried using the index attribute of <cfpdfformparam> but that only applies to forms created in LiveCycle. Does anyone know how to populate only one occurrence of a field name in a pdf using <cfpdfform>?
As an aside I have corrected the field name in the pdf for future use.

No, it is why advance users do not use the wizard.
Have a look at OpenOffice.org and its form creation. Once you add your fields in OpenOffice.org, just export to PDF and the form fields will be named just like you named in them in OpenOffice.org and the drop down values carry over.

Alias with field name in MS SQL Server

Is it possible that we can define alias for field name in MS SQL Server?
For example:
mytable : Id, Name, Value
Could we define "AnotherName" for "Name" field that we can call it from sql
SELECT anothername from mytable

I don't know if you can "permanently" create an alias
without a view or something like that but if you just
want another name when you execute a select do this:
Select name as another name from tableAt least in some databases the syntax for that can vary slightly. So the following might be needed....
Select name as 'another name' from table

Need header part with fields to be repeated

Hi,
How to print the header with fields that should be repeated in each page. i want to display the report in the following format
Header data(po number)
body (item details)
footerdata.(instuctions)
Header data will contain the fields also that should change in every page.
Thanks

Hey,
if you work with the RTF Template Builder and Microsoft Word to layout your report you either can use a table and place your po number in the table header; this will be repeated on every new page by default.
Or you put your po number in the page header, this will also be repeated automatically. Since you cannot use Word's form fields in page header or footer you have to write placeholders at your own! For example if your field is MY_FIELD than simply write <?MY_FIELD?>. Also have a look at chapter "Defining Headers and Footers" in the BI Publisher Report Designer's Guide.
HTH,
Stefan

InDesign Data Merge problem with field names

Hi to all.
I am trying to create a sales catalog with data merge. I have product name, description, old price, new price and image. However, when I select my .csv file as data source, InDesign recognizes different fields as one and puts them all together. I tried copying and pasting to new spreadsheet, retyping the info myself, saving as tab delimited and as comma delimited file. To better illustrate, here are exemplary screenshoots:
Please help, I don't understand what I am doing wrong. I'm a regular InDesign user for almost a decade, but I haven't used DataMerge until now, never needed it. I have basic knowledge in Excel, so if I did something wrong there please inform me (do I have to tell it somehow to "split" them into fields?).
Thank you in advance!

I would recommend to test with different export types in Excel like:
Tab-Divided txt files instead of csv or with different decoding.
When you have learned which is working fine, you can select this always in the future.
(There is also a possibility inside InDesign to change the type between tab separated text and CSV. In my experience it depends very much on the Excel version which would work. Microtrash has a bad history in localizing their programs, e.g. here in German, in numbers we write coma instead of a point, a point of a coma, so decided MS to exchange it every where on the Mac version with the outcome, that CSV files are not coma separated but dot separated and are not working on any data base import. So I can only use tab separated files.)

Concatenating sy-tabix with field name

While doing BDC I need to concatenate the sy-tabix with the field as the BDC is on item level.
LOOP AT request INTO wa_request.
    PERFORM dynpro USING:
        'X'     'SAPMV50A'              '1000',
        ' '     'BDC_OKCODE'            '=CHSP_T',
        ' '     'BDC_CURSOR'            'LIPS-POSNR('& sy-tabix &')',
        ' '     'BDC_OKCODE'            '=CHSP_T',
        ' '     'BDC_CURSOR'            'LIPS-POSNR(01)',
ENDLOOP.
As you can see I am trying to concatenate the sy-tabix so it will appear as LIPS-POSNR(01) and then LIPS-POSNR(02) .. How to accomplish this. Thank you

Hi,
You need to use a specific field for that :
data : text_field(14) type c,
       idx(2) type n.
idx = sy-tabix.
concatenate 'LIPS-POSNR(' idx ')' into text_field.
and then you can use it in your BDC coding :
    PERFORM dynpro USING:
        'X'     'SAPMV50A'              '1000',
        ' '     'BDC_OKCODE'            '=CHSP_T',
        ' '     'BDC_CURSOR'            text_field,
        ' '     'BDC_OKCODE'            '=CHSP_T',
        ' '     'BDC_CURSOR'            'LIPS-POSNR(01)',
Regards,
Nicolas.

Briefing Book Title shows the name of the Analysis along with Report Name

Hi,
When I add a report to the briefing books, The title of the PDF document shows the report name and below that it also shows the name of the analysis. Normally we save our analysis with some standard naming conventions having some special characters. Client does not need that name in the PDF.
How can I stop the Analysis Name to appear on the briefing book?
Please suggest.
Thanks
Gaurav A.

That's a great question, and it seems like something that should be standard with iCal.
The only thing I could think of would be to add the patient as an invitee, but that still wouldn't solve the problem of having their name be the title of the appointment. But the auto-complete function is there.
The other option (which is more convoluded) would be to use Filemaker Pro. It is extremely powerful and customizable and there are plenty of people out there who know how to develop for it. This option would be more expensive, but it could also be custom-tailored to your needs.
Those aren't great answers so I'm interested to see what others say. I'd like to implement it into my own iCal app.

Need infotype along with field name

Similar Messages

Maybe you are looking for