Need Inputs on ECS and XSD modifications

Hi All,
I need some inputs regarding the modification of ECS and XSD. Following are the details.
In our production environment, we have already deployed the ECS and XSD and there are around 20 TP set-ups and configurations using that ECS and XSD for outgoing document definition. As part of a new requirement we need to change the ECS and hence the XSD and redeploy it in B2B.
Doubts
=====
1. If we deploy a new ECS and XSD, do we need to redeploy all the 20 TP agreement and configurations. PLease let me know whether updating Document Protocol by uploading the new ECS and XSD will help.
2. If we add an additional element in the ECS and XSD definition, do we need to change the BPEL process's transformation part.
Please let me know.
Thanks,
Dibya

Hello Dibya,
Answers are inline.
1. If we deploy a new ECS and XSD, do we need to redeploy all the 20 TP agreement and configurations. PLease let me know whether updating Document Protocol by uploading the new ECS and XSD will help.
RN: You have to quese, re-validate, redeploy all Agreement.
2. If we add an additional element in the ECS and XSD definition, do we need to change the BPEL process's transformation part.
RN: As a Best practice you need to change the transformation, however this is not a must if the node is optional.
Rgds,Ramesh

Similar Messages

Need to generate *.ecs and *.xsd for EDI 841 data

Hi,
I have an EDI 841 data. I want to generate *.ecs and *.xsd for EDI 841 data using B2B document Editor. Please help me generate *.ecs and *.xsd for EDI 841. Thanks in advance.

Hello,
I have generated ecs and xsd for EDI 841 Specification/Technical Information, send me a test email i will send you the same.
Alternatively you can generate the same from Document Editor as well.
Rgds,Ramesh

997 generation with custom ecs and xsd

I am able to generate the 997 using the default 997.ecs and 997.xsd. The generated X12 997 has 6 segments but we need to send only 4 segments. I have created a new ecs and xsd (deleted the two segments) using the spec builder. When I use this custom 997 document, it throws below error.
Error Brief : Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. The values are not equal.
The XML payload shows data for the two segments that I have deleted from the ecs in specbuilder. I thought B2B would generate the xml payload based on the ecs and xsd.
Is it possible to generate a customized 997 in B2B?
Thanks
Ismail M.

Is it possible to generate a customized 997 in B2B?No, B2B may not auto-generate the customized 997. For customization cases, it is recommended to handle FA at middleware (SOA layer) or at back-end.
Regards,
Anuj

Problem with ECS and XSD

Hi B2B Gurus,
We are facing the problem with ECS and XSD files from past 2 weeks, Steps we followed
1. Created a ECS file in document editor version 11g: 6.6.0
2. ECS files consists only from ST and SE segments
Ex: ST
BCH
CUR
REF
PER -- Exclude
TAX -- Exclude
SE
3: Generated a XSD file from ECS file( File --> export---> Oracle B2B) in document ediotr
4. We imported a ECS and XSD file in B2B console( documents---docdef-transaction set ECS file) and XSD File
5. We tested one file from manually we face below error:
Error Code B2B-51507
Error Description Machine Info: (usmtnz-dinfap19.dev.emrsn.org) Description: Payload validation error.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text
and some times it shows Guideline load Error or simply Error
Please help us to resolve this
Regards

Anuj,
We are sending the EDI XML file from backend, then B2B will convert it into EDI file, How can we analyze EDI XML file with ECS file, B2B is not converting to EDI.
1. Can we use 10g ECS file and XSD file in 11G
2. I tried to import it, but it showing below error while doing testing
App Message property     {MSG_ID=90422086, Sequencing=false, DOCTYPE_REVISION=5020, MSG_TYPE=1, FROM_PARTY=EMERSON, DOCTYPE_NAME=850, TO_PARTY=APLL, ATTACHMENT=}
Direction     OUTBOUND
State     MSG_ERROR
Error Code     B2B-51507
Error Text     Error Brief : The element does not include any significant data.
Error Description     Error : The Element PER02 does not include any significant data characters. Segment PER is defined in the guideline at position 3600.{br}{br}This error was detected at:{br}{tab}Segment Count: 11{br}{tab}Element Count: 2{br}{tab}Characters: 5395 through 5397
Created Date     06/20/2011 02:52 PM
Modified Date     06/20/2011 02:52 PM
Note: I used the same files in 10G its working fine.
Regards
Edited by: Francis on Jun 20, 2011 10:48 AM

Generation of .ecs file and .xsd file

Hi,
I am working on the Acme-GlobalChips tutorial Query using File 1.0 protocol.
I have few question on that.
While creating the Business actions and Trading partner IN B2B we use two 850.ecs and 850.xsd.Can these be used for all the trading partners or they are partner specific.If not then do we develop it using Document Editor.
Moreover if after we create the .ecs using the tool can we generate the .xsd file using same tool.
I have this doubt because I used the .ecs file provide with the tutorial and used EDI file provide by some other partner it worked.I mean I was able to generate the EDI-Xml as payload in reports section of B2B.
Can some help me on this.
Regards
Lalit

Hi Lalit,
1. Yes. Different Trading partners can use the same Business action. However, you can also override the .ecs file and .xsd file as per your requirement.
2. We can also generate .xsd files using the Document editor.
Regards,
Dheeraj

After secure erase of disk ready for sale of MBP I needed to input my AppleID and password in order to install operating system. is this a problem for the buyer?

I ran a secure erase of the hard disk ready for sale of my MBP 2007 (Snow Leopard). But then I needed to input my AppleID and password in order to download and install an operating system (Yosemite). The screen the showed the Welcome opening as it does for a completely new machine. It is ready for a new owner to register and use his or her own AppleID. Will the fact that the OS was downloaded under my AppleID mean that the new owner will still be able to update it as necessary when the time comes?

You can't sell that computer with an OS newer than 10.6.8 on it(or 10.7.5 if you originally got Lion from a thumbdrive and not the Mac App Store.) Any higher version will be tied to your Apple ID.
(115828)

I need an app that allows me to create a editable leaderboard by inputting a time and a name?

I need an app that allows me to create a editable leaderboard by inputting a time and a name for up to 20 people and being able to edit and delete all the names and times when im finished any ideas?

why not actually use a spreadsheet program? You can do everything you describe in Excel. i don't use apples equivalent, Numbers, but Im sure it is quite capable.

Need inputs regarding the dvd drive on primary ide channel.

Specs:
Motherboard: MSI P35 Neo3 (MS-7935 1.0)
CPU: Intel Core2 Duo E6550
Memory: Team Elite DDR2800 (2x1GB Dual Channel)
Hard drive: Seagate Barracuda 7200.11 500GB 32MB Cache (SATA)
Optical drive: LG GSA-H55L (IDE only) Firmware version 1.02
Graphics card: Gecube HD3870
Chipset: Intel P35/G33/G31 (Rev. A2)
Southbridge: Intel 82801IB (ICH9)
LPCIO: Fintek F71882F
BIOS: AMI V1.1 (11/07/2007)
Hello,
Almost all new motherboards today only have a primary ide channel and the rest are SATA.
I need inputs regarding the dvd drive which is shown in device manager as located on the primary ide channel while the hard drive is located on the secondary channel. Because I would like to update the dvd drive to the latest firmware (version 1.06; to be able to recognize more blank media) but the LG site recommends that the drive (dvd) be located on the secondary ide channel.
I already tried to uninstall every channel from the device manager but all would still be the same after reboot, dvd drive on primary, hard drive on secondary.
Current ide mode in BIOS is set to AHCI+IDE mode, DMA modes are fine (UDMA4 for dvd, UDMA5 for hard drive), boot sequence (1st=HD, 2nd=DVD, 3rd=Floppy drive)
Tried switching to IDE mode only in BIOS but would not detect the optical drive. Never tried RAID+IDE mode since I only have a single hard drive.
I'm not sure but if I try to update the firmware, it might instead try to update the hard drive's firmware instead of the optical drive and make the hard drive unusable.
I would like to know if anybody with this same situation was able to successfully update the optical drive's firmware or is there some way to place the optical drive on the secondary ide channel and the hard drive on primary for me to follow and replicate the process.
Thank you for any replies.

Thanks sir NovJoe for the reply.
Just received the solution from another forum where I posted the same problem.
They said that the flash program for the firmware will detect the drive on its own and would not flash other devices except the optical drive itself. So its pretty safe, and I can confirm this since I just flashed my ODD a little over a while ago and everything went fine. No errors.
Though I'm speaking for the brand of ODD I own and may be different for other brands so take precautions as well. It may be different for the others.

Text input into WebTemplate and sending it to an ODS - urgent

SDNers,
I have a unique requirement. I need to take in text input on screen and then send back the same into an ODS in BW.
Something like :
Project Overrun | Text Area
20% | <Project Manager's comments>
I need to pass this on to atleast an ABAp FUnction modue so that I can do the further processing.
Heike I did see some posts by you on using the help service - could you walk me through as to how to do it. and also how to modify the onclick event.
If you can direct me to any how to paper / site also it would be useful.
Arun Varadarajan

Hi Arun,
in this scenario I wouldn't use the help service. The help service is more suited if you need to interact with your web application later on (meaning the state of the web items or data provider changes) or you need the state of a Data Provider or web item in your application. In your case it's just write something to an ODS. Why not just include a form in your Web Template. When submitting a form just call a BSP in a new window. In the BSP read the transfered parameters and do whatever you like.
Heike

J2I9 program J_1I57AE Proforma Register ecs and sh ecs required

Hi All,
I have a requirement to display the opening and closing balnace of ECS and SH ECS along with the opening and closing CENVAT balances for input and capital goods.
Can anyone tell me what logic can be used to get ECS and SH ECS.
As per my understanding from j_1ipart2 table the ecs value can be fetched .
LOOP AT gt_part2 WHERE
(       trntyp = 'GRPO'
   OR    trntyp = 'EWPO'
   OR    trntyp = 'CAPE'
   OR    trntyp = 'DIEX'
   OR    trntyp = '57CM'
   OR    trntyp = 'CEIV' ).
MOVE gt_part2-exbed TO gt_totals-exbed.
MOVE gt_part2-exsed TO gt_totals-exsed.
MOVE gt_part2-exaed TO gt_totals-exaed.
I don't know exactly how to populate the ecs values .
Kindly help what can be done in order to get the ecs and sh ecs opening and closing balances.
Regards.

Hi every one ,
Any solution ?
Regards.

J2I9 program J_1I57AE Proforma Register ecs and sh ecs issue

Hi All,
I have a requirement to display the opening and closing balnace of ECS and SH ECS along with the opening and closing CENVAT balances for input and capital goods.
Can anyone tell me what logic can be used to get ECS and SH ECS.
As per my understanding :
LOOP AT gt_part2 WHERE
(       trntyp = 'GRPO'
   OR    trntyp = 'EWPO'
   OR    trntyp = 'CAPE'
   OR    trntyp = 'DIEX'
   OR    trntyp = '57CM'
   OR    trntyp = 'CEIV' ).
MOVE gt_part2-exbed TO gt_totals-exbed.
MOVE gt_part2-exsed TO gt_totals-exsed.
MOVE gt_part2-exaed TO gt_totals-exaed.
Here from j_1ipart2 table the ecs value can be fetched .
Kindly help what can be done in order to get the ecs and sh ecs opening and closing balances.
Regards.

Please reply ..

Input a string and assign to a variable in the console window

i'm absolutely and completely new to java
i need to be able to input a string and then assign it to a variable, entirely using the console window, basically i'm looking for the Java alternative to C++'s "cin"
i've tried the System.in. method but nothing seems to work
i know this should be simple, but i cant find it anywhere
cheers

i've tried the System.in. method That thing is not a method: it's an object, an intstantiation of the InputStream
class. If you read the API documentation for that class you'll notice that it
isn't much more sophisticated than C's file IO. You can wrap an
object if this class in a more high level class (see InputStreamReader
and BufferedReader).
The latter allows you to read an entire line of characters. If you really want
to go fancy you can wrap the first class in a Scanner which is only
available in Java 1.5
kind regards,
Jos

ECS and SEcess field missing in Excise Invoice Tab in MIGO

What config settings in SAP 4.7 do I need in order to get the ECS and SEcess field in Excise Invoice Tab in MIGO.
Went through few threads but was unable to get a solution......

HI,
In SPRO-Logistic general-Tax on goods movement-India -Basic setting-Maintain excise registration
here check your for excise registration number you have mark check for for cess and AT1
it should be there
second check you have maintain 100% setoff condition in your PO for same condition
Regards
Kailas Ugale

XML and XSD file to an internal table

I had read a lot of thread but i don't understand how to deal with xml/xsd in R3.
I need someone that have a definite example for this escenary please.
With OPEN DATASET took from the server XML and XSD file, and put it in two internal tables type string.
What functions or method have to use, and how to use them, to charge the XML file in an internal table?
This is an example of XML and XDS:
XML
AND CONTINUE
Best Regards,

I just tried to interpret your question, it was not obvious what you wanted.
I guess what you mean is that you have defined (statically) a deep structure, and you want to decode the XML into it. That is called a transformation (transaction STRANS, statement CALL TRANSFORMATION). You have the choice between 2 transformation languages: XSLT and ST. Of course, it depends what release you are running.
I advise you to play first with the ID transformation, to convert an ABAP deep structured data object into XML, so that you see what XML is generated, this one is called asXML. If you create your own transformation, when you call it, it will first convert automatically the data object to asXML, and the transformation has to do the rest of the job.
You can do the opposite, i.e. converting from XML to a data object, according to the same principle (intermediate asXML).
Well, there are lots of things to say, I recommend you to read articles and documentation on XSLT and ST (search on SDN).
About XSD, it won't help (and I did never see any possibility to use it) to decode the XML, as you must anyway define the target data object statically (and there's no tool to generate the ABAP code of the data object definition from the XSD).
Note that you may also use iXML libraries to parse the XML.
Please tell us more.
BR
Sandra

Need Inputs - Creation of webservice in SAP R3 through PI

Hi Experts,
Need inputs that my client wants me to create an webservice in SAP/R3 through PI and they (client) will call it by their 3rd party software.
Webservice contain fields like :- Comany_Code, Location_Code,Item _code etc.
SAP -
> PI ---> 3rd party
Is this possible through PI ? Please comment !
Thanks.

Hi,
If you have such kinda requirement , then it is easy to create WSDL(webservice) on PI System..
Create a normal Xi Interface with normal Steps .....
Your Sender DataType will be acc to Your requirement as clients want...
go to tools - Define webservice ... ( will Use Outound Service Interface and namespace)
read the template and Put values in there . This will genrate a WSDL for you ,
You Can give this Genertaed , WSDL File to Client to consume in their application and Pass data to it ..
Hope it helps ..
Regards
Prabhat Sharma.

Need Inputs on ECS and XSD modifications

Similar Messages

Maybe you are looking for