Need inputs on QM functionlity details about..

Hi,
I need information about SAP Quality Management functionalities to capture below points in an organizational environment.
u2022     Records Management
u2022     Audit Management
u2022     Document & Procedure Control
u2022     Non Conformance Product Tracking
u2022     Process Control aspects
u2022     Supplier Qualification
If SAP QM is not addressing these functionalities then please mention other modules in SAP which support these functions.
Thanks
Avinash

Dear Avinash
SAP QM captures all these functionalities. You need to be specefic for each requirement so that a specfic answer can be given
Regards
Gajesh

Similar Messages

Need step by step in details about upgrade 11.5.3 to 12.1.1

Hi every one !
i' m trying to upgrade our ebs 11i from 11.5.3 on win NT4 To R12.1.1 on RHEL Linux 5.5 with another hardware. so can any one help me to get what i need in details with step by step instructions .
and what patchs must be downloaded. and any thing else do i need for this purpose .
i appreciate your help.
we're on :
ebs 11.5.3 with DB 8.1.6 On Win NT4 , Tow Nodes .
going to :
ebs 12.1.1 with DB 11g on RHEL Linux 5.5 , Tow Nodes.
thanks
Hani
Edited by: user2987179 on Feb 5, 2012 2:58 AM

Please see old threads for similar dicussion -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Upgrade+11i+to+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

I have just started to use Muse for our design agency and learning how to build ourselves a new site, I have manged to create a basic lightbox which contains sliding images, what I need to do now is have a pop up window which goes into detail about the pr

I have just started to use Muse for our design agency and learning how to build ourselves a new site, I have managed to create a basic lightbox which contains sliding images, what I need to do now is have a pop up window which goes into detail about the projects, what I would like is a piece of text or icon that when you roll over it and then click a separate window pops up with additional information in, once finished reading the info you can then click to close the box, any advice on how to do this?

The best way to do what you're asking is with the Composition widget. Start with the Tooltip preset, which, by default shows the info on rollover. You can change the option to show on click, which is what you're after. You can also add the close button or have the info disappear on rollout.
David

Need details about "Lock Profiling" tab of JRockit JRA

Hi,
I'm experimenting with the JRockit JRA tool: I think this is a very useful tool ! It provides very valuable information.
About locks ("Lock Profiling" tab), since JRockit manages locks in a very sophisticated manneer, it enables to get very important information about which monitors are used by the application, helping for improving the performances.
Nevertheless, the BEA categories (thin/fat, uncontended/contended, recursive, after sleep) are not so clear. A short paper explaining what they mean would greatly help.
Fat contended monitors cost the most, but maybe 10000 thin uncontended locks cost the same as 1 fat contended lock does. We don't know.
So, there is a lack of information about the cost (absolute: in ms, or relative: 1 fat lock costs as N thin locks) of each kind of monitor. This information would dramaticaly help people searching where improvements of lock management are required in their application.
Thanks,
Tony

great explanation! Thanks
"ihse" <[email protected]> wrote in message
news:18555807.1105611467160.JavaMail.root@jserv5...
About thin, fat, recursive and contended locks in JRockit:
Let's start with the easiest part: recursive locks. A recursive lock
occurs in the following scenario:synchronized(foo) { // first time thread takes lock
synchronized(foo) { // this time, the lock is taken recursively
}The recursive lock taking may also occur in a method call several levels
down - it doesn't matter. Recursive locks are not neccessarily any sign of
bad programming, at least not if the recursive lock taking is done by a
separate method.
The good news is that recursive lock taking in JRockit is extremely fast.
In fact, the cost to take a lock recursively is almost negligable. This is
regardless if the lock was originally taken as a thin or a fat lock
(explained in detail below).
Now let's talk a bit about contention. Contention occurs whenever a thread
tries to take a lock, and that lock is not available (that is, it is held
by another thread). Let me be clear: contention ALWAYS costs in terms of
performance. The exact cost depends on many factors. I'll get to some more
details on the costs later on.
So if performance is an issue, you should strive to avoid contention.
Unfortunately, in many cases it is not possible to avoid contention -- if
you're application requires several threads to access a single, shared
resource at the same time, contention is unavoidable. Some designs are
better than others, though. Be careful that you don't overuse
synchronized-blocks. Minimize the code that has to be run while holding a
highly-contended lock. Don't use a single lock to protect unrelated
resources, if that lock proves to be easily contended.
In principle, that is all you can do as an application developer: design
your program to avoid contention, if possible. There are some experimental
flags to change some of the JRockit locking behaviour, but I strongly
discourage anyone from using these. The default values is carefully
trimmed, and changing this is likely to result in worse, rather than
better, performance.
Still, I understand if you're curious to what JRockit is doing with your
application. I'll give some more details about the locking strategies in
JRockit.
All objects in Java are potential locks (monitors). This potential is
realized as an actual lock as soon as any thread enters a synchronized
block on that object. When a lock is "born" in this way, it is a kind of
lock that is known as a "thin lock". A thin lock has the following
characteristics:
* It requires no extra memory -- all information about the lock is stored
in the object itself.
* It is fast to take.
* Other threads that try to take the lock cannot register themselves as
contending.
The most costly part of taking a thin lock is a CAS (compare-and-swap)
operation. It's an atomic instruction, which means as far as CPU
instructions goes, it is dead slow. Compared to other parts of locking
(contention in general, and taking fat locks in specific), it is still
very fast.
For locks that are mostly uncontended, thin locks are great. There is
little overhead compared to no locking, which is good since a lot of Java
code (especially in the class library) use lot of synchronization.
However, as soon as a lock becomes contended, the situation is not longer
as obvious as to what is most efficient. If a lock is held for just a very
short moment of time, and JRockit is running on a multi-CPU (SMP) machine,
the best strategy is to "spin-lock". This means, that the thread that
wants the lock continuously checks if the lock is still taken, "spinning"
in a tight loop. This of course means some performance loss: no actual
user code is running, and the CPU is "wasting" time that could have been
spent on other threads. Still, if the lock is released by the other
threads after just a few cycles in the spin loop, this method is
preferable. This is what's meant by a "contended thin lock".
If the lock is not going to be released very fast, using this method on
contention would lead to bad performance. In that case, the lock is
"inflated" to a "fat lock". A fat lock has the following characteristics:
* It requeries a little extra memory, in terms of a separate list of
threads wanting to acquire the lock.
* It is relatively slow to take.
* One (or more) threads can register as queueing for (blocking on) that
lock.
A thread that encounters contention on a fat lock register itself as
blocking on that lock, and goes to sleep. This means giving up the rest of
its time quantum given to it by the OS. While this means that the CPU will
be used for running real user code on another thread, the extra context
switch is still expensive, compared to spin locking. When a thread does
this, we have a "contended fat lock".
When the last contending thread releases a fat lock, the lock normally
remains fat. Taking a fat lock, even without contention, is more expensive
than taking a fat lock (but less expensive than converting a thin lock to
a fat lock). If JRockit believes that the lock would benefit from being
thin (basically, if the contention was pure "bad luck" and the lock
normally is uncontended), it might "deflate" it to a thin lock again.
A special note regarding locks: if wait/notify/notifyAll is called on a
lock, it will automatically inflate to a fat lock. A good advice (not only
for this reason) is therefore not to mix "actual" locking with this kind
of notification on a single object.
JRockit uses a complex set of heuristics to determine amongst other
things:
* When to spin-lock on a thin lock (and how long), and when to inflate it
to a fat lock on contention.
* If and when to deflate a fat lock back to a thin lock.
* If and when to skip on the fairness on a contended fat lock to improve
performance.
These heuristics are dynamically adaptive, which means that they will
automatically change to what's best suited for the actual application that
is being run.
Since the switch beteen thin and fat locks are done automatically by
JRockit to the kind of lock that maximizes performance of the application,
the relative difference in performance between thin and fat locks
shouldn't really be of any concern to the user. It is impossible to give a
general answer to this question anyhow, since it differs from system to
system, depending on how many CPU:s you have, what kind of CPU:s, the
performance on other parts of the system (memory, cache, etc) and similar
factors. In addition to this, it is also very hard to give a good answer
to the question even for a specific system. Especially tricky is it to
determine with any accuracy the time spent spinning on contended thin
locks, since JRockit loops just a few machine instuctions a few times
before giving up, and profiling of this is likely to heavily influence the
time, giving a skewed image of the performance.
To summarize:
If you're concerned about performance, and can change your program to
avoid contention on a lock - then do so. If you can't avoid contention,
try to keep the code needed to run contended to a minimum. JRockit will
then do whatever is in its power to run your progam as fast as possible.
Use the lock information provided by JRA as a hint: fat locks are likely
to have been contended much or for a long time. Put your effort on
minimizing contention on them.

Need details about Toshiba 15.4" Intel Duo Core 2 T5800

Can anyone give me any information/review on this computer. I found it in a FuturShop store for 999.99$.
However I can't seem to find any information about it online anywhere.
I was told by a friend that it's a new special edition laptop or something. I need a tough computer as I do a lot of traveling and I will be using it for photos, music, videos, home financing, internet, excel, word, etc. Some games but not a main concern.
Any info on the webcam, DVD burning capabilities, and expandibility would be appreciated.
Below are some of the specs. I'm not too knowledgeable on computers so I hope I've given enough relevant info. Thanks in advance.
4GB DDR2
320GB Hard Drive
HELP

Well buddy, the most information and details about all actual Toshiba notebooks can be found on the Toshiba European page.
http://eu.computers.toshiba-europe.com
Here you should search in Laptops area

Need details about messageName

I am using the following code to display a confirm message, once a new record inserted. This a program from the Tool Box tutorial.
MessageToken[] tokens = { new MessageToken("EMP_NAME", employeeName),
new MessageToken("EMP_NUMBER", employeeNum) };
OAException confirmMessage = new OAException("AK", "FWK_TBX_T_EMP_CREATE_CONFIRM", tokens,
OAException.CONFIRMATION, null);
pageContext.putDialogMessage(confirmMessage);
This is working fine. But I could not understand what are these values "AK" and "FWK_TBX_T_EMP_CREATE_CONFIRM". Do we need to configure these any where in the code?
Please give me the details about this?

Please see
<JDEV_CLIENT_INSTALL_DIR>/jdevdoc/javadoc/fwk/oracle/apps/fnd/framework/OAException.html#OAException(java.lang.String, java.lang.String, oracle.apps.fnd.common.MessageToken[], byte, java.lang.Exception[])
The arguments are "Application Short Name", "Message Name".
You would need to define the message in FND Message Dictionary.

Need details about soap

I am new ot soap technology . I am using apache axis soap .. Any body can give details about how to use the soap in the application .. For example I want to display the foot ball score in my website then in Germany they alreay provide the soap service then we request the service then get the score and then display that in website . my doubt is without knowing any thing first how to request the soap service provide in the Germany for Foot ball score and any body please give some sample codes and documentation

Thank you for the request.
Your Toshiba Virtual Store account 32651 has been reset.

Need details about Statistics - Internals

Hi,
I am aware of Statistics and how it helps CBO. I would like to know more about internals of Statistics, I know Oracle
maintains certain details in the below views, also in Columns and Partitions Metadata views.
DBA_TABLES
DBA_TAB_STATISTICS
DBA_INDEXES
DBA_IND_STATISTICS
I know it maintains NUM_ROWS and LAST_ANALYZED details in DBA_TABLES and DBA_INDEXES.
Please provide details about the data being maintained in other views.
I'm aware of Histograms, it maintains actual details about Data Distribution. I would like to know how the Normal Statistics differs from Histograms,
it uses the same parameter method_opt with different values.

845956 wrote:
I know it maintains NUM_ROWS and LAST_ANALYZED details in DBA_TABLES and DBA_INDEXES.
It actually maintains much more than just the NUM_ROWS and others you specified.
DBA_TABLES
DBA_TAB_STATISTICS
DBA_INDEXES
DBA_IND_STATISTICS
Regards,
P.

Need details about my account 32651

PLEASE SEND ME DETAILS ABOUT MY E-MAIL AND PASSWORD.
I HAVE LOST THEM. TKS.

Thank you for the request.
Your Toshiba Virtual Store account 32651 has been reset.

Could you pls give the details about the Unicode conversion during Upgrade

Hi,
Can anyone give details about the Unicode conversion during SAP Upgradation fro 4.6C to ECC6.
Waiting for quick response
Best Regards,
Padhy

Hi,
These are the few points i gathered during my upgradation project.
Before starting any upgradation project, it is necessary to take up the back-up of the existing systems. As we are going to upgrade the entire system, we will be changing so many things and if something happens, without back-up, we will be in a trouble.
So it is advised to keep a back-up of the existing system.
Say for example we have the existing system E4B which is of Version 4.6C. Now we want to upgrade it to Version 4.7. Let us see how we can do it.
Version upgrades not only means that we need to run the new Version CD over the existing Version System but only involves some other thing.
Version Upgrade involves the following Steps.
Say we want to upgrade for Version 4.7 from Version 4.6, which is in the System E4B. Now we created one more system called as E1B in which the upgradation for Version 4.7 can be done.
First copy the entire E4B system into the E1B System which is created for Version 4.7.
Apply the Version 4.7 CD provided by SAP over the E1B System.
Now check whether all the functionalities that was in E4B system works fine with E1B system also.
Thus the Version Upgrade involves two steps.
1. SAP Upgradation with the help of the CD
2. Manual Upgradation.
1. SAP Upgradation with the help of the CD
This is nothing but after taking the copy of the existing system into a new system, the upgradation CD from SAP is applied over the new system.
2. Manual Upgradation.
This Manual Upgradation involves
2.1 Upgradation of Standard Objects
2.1.1 SPAU Objects
2.1.2 SPDD Objects
2.2 Upgradation of Custom Objects.
Upgradation of Custom Objects can be placed under the following three categories.
Unicode Compliance
Retrofit
Upgrade
Please Find below some of the common Unicode Errors and their solutions
1. Error:
In case of Translate Error; Dangerous use of Translate in Multilingual system.
Correction:
To correct the Error occurring on TRANSLATE statement use this additional statement before the Translate statement.
SET LOCALE LANGUAGE sy-langu.
This statement defines the Text Environment of all the programs & internal sessions in the language specified in the LANGUAGE KEY, which in this case is sy-langu, i.e. the log on language of the user.
2. Error:
In case of Open Dataset Error; Encoding Addition must be included.
Correction:
This Error occurs only when the MODE is TEXT.
To correct the Error occurring on OPEN DATASET statement use this statement instead.
OPEN DATASET dataset_name FOR access IN TEXT MODE ENCODING DEFAULT.
Where: dataset_name NAME OF THE DATASET.
Access INPUT or OUTPUT or APPENDING or UPDATE.
DEFAULT - Corresponds to UTF-8 in UNICODE systems &
NON_UNICODE in NON-UNICODE systems.
3. Error:
In case of the usage of the Obsolete FM UPLOAD/DOWNLOAD or WS_UPLOAD/DOWNLOAD; Function module UPLOAD is flagged as obsolete.
Correction:
The FM GUI_DOWNLOAD/UPLOAD is used.
The variations to be made in the parameters of the FM:
1. Filename It must be of STRING type.
2. Filetype DAT is not used any longer, instead ASC is used.
3. Field Separator The default value SPACE is used, incase for a TAB separated file X can be used.
4. Error:
In case of CURRENCY/UNIT Addition Error; Use addition CURRENCY/UNIT when outputting.
Correction:
The CURRENCY addition specifies the currency-dependant decimal places for the output of the data objects of type i or p. To obtain the currency-key, the field CURRKEY of the table TCURX is used. The system determines the number of the decimal places from the field CURRDEC of the selected CURRKEY.
To correct this error follow the following method:
WRITE: /3 'TOTAL',' ', TOTAL.
WRITE: /3 TOTAL, , TOTAL CURRENCY 2. --- Where 2is the Currency Key for Getting 2 decimal places.
5. Error:
In case of TYPE X Error; Variable must be of C, N, D, T or STRING type.
Correction:
We need to change all the Type X (Hexadecimal) variables to Type C with their values unchanged.
So the method to be followed is:-
1. Load the definition of the class CL_ABAP_CONV_IN_CE or CL_ABAP_CHAR_UTILITIES.
2. Declare the variable as Type C, and use the method UCCP(XXXX) of the class CL_ABAP_CONV_IN_CE where XXXX represents the 8-bit Hexadecimal value and incase the variable holds a Hex value for a Horizontal Tab , then the Attribute HORIZONTAL_TAB of the class CL_ABAP_CHAR_UTILITIES can be used directly instead of using the method UCCP.
E.g.:
i) *DATA: TAB TYPE X VALUE 09, Tab character
CLASS: CL_ABAP_CHAR_UTILITIES DEFINITION LOAD.
DATA TAB TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
ii) * DATA: CHAR TYPE X VALUE 160.
CLASS: CL_ABAP_CONV_IN_CE DEFINITION LOAD.
DATA CHAR TYPE C.
CHAR = CL_ABAP_CONV_IN_CE=>UCCP(00AO).
(Here 00A0 is the Hexadecimal equivalent of the decimal 160).
3. Incase the TYPE X Variable has a length more than 1, then an internal table must be created for the variable.
E.g.:
CLASS: CL_ABAP_CONV_IN_CE DEFINITION LOAD.
DATA : LF(2) TYPE X VALUE 'F5CD'.
DATA : BEGIN OF LF,
A1 TYPE C,
A2 TYPE C,
END OF LF.
LF-A1 = CL_ABAP_CONV_IN_CE=>UCCP('00F5').
LF-A2 = CL_ABAP_CONV_IN_CE=>UCCP('00CD').
6. Error:
In case of the Character -Error; The Character -cant appear in names in Unicode Programs.
Correction:
The Character -(Hyphen) appearing in Variable names is replaced by the character _ (Under Score) for Unicode/Upgrade Compliance.
E.g.:
*wk-belnr LIKE bkpf-belnr,
*wk-xblnr LIKE bkpf-xblnr,
*wk-date LIKE sy-datum,
*wk-wrbtr LIKE bseg-wrbtr,
*wk-name1 LIKE lfa1-name1,
*wk-voucher(8) TYPE c.
wk_belnr LIKE bkpf-belnr,
wk_xblnr LIKE bkpf-xblnr,
wk_date LIKE sy-datum,
wk_wrbtr LIKE bseg-wrbtr,
wk_name1 LIKE lfa1-name1,
wk_voucher(8) TYPE c.
7. Error:
In case of The SUBMIT-TO-SAP-SPOOL Error; you should not use the statement SUBMIT-TO-SAP-SPOOL without the WITHOUT SPOOL DYNPRO addition.
Correction:
1. Declare variables of type PRI_PARAMS, ARC_PARAMS, and a variable of TYPE C which would be used as a VALID FLAG.
2. Call the FM GET_PRINT_PARAMETERS:
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
ARCHIVE_MODE = '3'
DESTINATION = P_DEST
IMMEDIATELY = 'X'
IMPORTING
OUT_ARCHIVE_PARAMETERS = archive_parameters
OUT_PARAMETERS = print_parameters
VALID = valid_flag
EXCEPTIONS
INVALID_PRINT_PARAMS = 2
OTHERS = 4
3. Use the SUBMIT-TO-SAP-SPOOL statement.
E.g.:
     submit zrppt500
     using selection-set 'AUTO3'
     with res_no eq lo_rsnum
     with sreserv in preserv
     to sap-spool destination p_dest
     immediately 'X'. "print immediate
DATA: print_parameters type pri_params,
archive_parameters type arc_params,
valid_flag(1) type c.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
ARCHIVE_MODE = '3'
DESTINATION = P_DEST
IMMEDIATELY = 'X'
IMPORTING
OUT_ARCHIVE_PARAMETERS = archive_parameters
OUT_PARAMETERS = print_parameters
VALID = valid_flag
EXCEPTIONS
INVALID_PRINT_PARAMS = 2
OTHERS = 4
Submit zrppt500
Using selection-set 'AUTO3'
With res_no eq lo_rsnum
with sreserv in preserv
to sap-spool
SPOOL PARAMETERS PRINT_PARAMETERS
ARCHIVE PARAMETERS ARCHIVE_PARAMETERS
WITHOUT SPOOL DYNPRO.
8. Error:
In case of Message Error; Number of WITH fields and number of Place Holders are not same .
Correction:
Split the statement after WITH into the same number as the place holder for that Message ID.
E.g.:
1. * MESSAGE E045.
MESSAGE E045 WITH '' ''.
2. in program ZIPI0801
     Start of change for ECC6
     message e398(00) with 'Could not find access sequence'
     'for condition type:'
     p_ptype.
message e398(00) with 'Could not find '
'access sequence'
'for condition type:'
p_ptype.
     End of change made for ECC6
9. Error:
In case of Move between 2 different Structures; The structures are not mutually convertible in a Unicode program.
Correction:
Make both the Data Types compatible and then assign the contents.
E.g.:
The statement move retainage_text to temp_text. Gives an error, where RETAINAGE_TEXT is an internal table and TEMP_TEXT is a string of length 200.
A Feasible solution for this is to specify from which position to which position of the string, the fields of RETAINAGE_TEXT should be assigned.
TEMP_TEXT+0(1) = RETAINAGE_TEXT-DQ1.
TEMP_TEXT+1(1) = RETAINAGE_TEXT-HEX.
TEMP_TEXT+2(20) = RETAINAGE_TEXT-FILLER1.
TEMP_TEXT+22(15) = RETAINAGE_TEXT-AMT_DUE.
TEMP_TEXT+37(8) = RETAINAGE_TEXT-TEXT.
TEMP_TEXT+45(10) = RETAINAGE_TEXT-DUE_DATE.
TEMP_TEXT+55(1) = RETAINAGE_TEXT-DQ2.
10. Error:
In case of no description found; add a GUI title.
Correction:
In this type of error gui title is generally missing so add a GUI title to the module pool.
11. Error:
In case of writing internal or transparent table
Correction:
Write individual fields.
E.g.:
WRITE: / EXT. --> EXT should be a character type field
WRITE: / EXT-ZZSTATE, EXT-LINE_NO, EXT-LINE_TXT, EXT-AMT, EXT-ZZSKUQTY.
12. Error:
In case of combination reference table/field S541-UMMENGE does not exist
Correction:
Was due to error in reference table S541. TABLE S541 has errors
1)Foreign key S541- ZZMARKET (ZZMARKET AND KATR2 point to different domains)
2)Foreign key S541-ZZACQUIGRP (ZZACQUIGRP AND KATR8 point to different domains)
Changed the domain of ZZMARKET (from ZMKCODE to ATTR2)
And that of ZMKCODE (from ZACCODE to ATTR8)
13. Error:
In case of KEY does not exist
Correction:
The reference table for field KBETR was KNOV earlier changed it to RV61A as KNOV was in turn referring to RV61A.
14. Error:
Incase of WRITE statement, Literals that take more than one line is not permitted in Unicode systems.
Correction: To correct this error, we need to align the spaces accordingly so that the statement doesnt go beyond the line.
15. Error:
Incase of Data statement, The data type ZWFHTML can be enhanced in any way. After a structure enhancement, this assignment or parameter might be syntactically incorrect..
Correction: To correct this error, instead of like in the Data statement, use type.
16. Error:
Incase of DESCRIBE statement, DESCRIBE can be used only with IN BYTE... Or IN CHARACTER mode in Unicode systems.
Correction: To correct this error, use additional text, IN BYTE MODE / IN CHARACTER MODE along with this statement.
CHARACTER MODE is added when the data object is of flat/ character type.
BYTE MODE is added when the data object is a deep structure.
Syntax: DESCRIBE FIELD data_obj : LENGTH blen IN BYTE MODE,
LENGTH clen IN CHARACTER MODE.
Where blen and clen must be of type I.
17. Error:
Incase of DO-LOOP Error, In Do loop range addition needed
Correction:
An internal tables is declared and the two fields (VARYING field and NEXT field) were
Included inside the internal table
E.g.: In program SAPMZP02
DO 11 TIMES
     VARYING STATION_STATE FROM STATION1 NEXT STATION2. ECC6
CASE SYST-INDEX.
WHEN 1
STATION_STATE = STATION1.
WHEN 2
STATION_STATE = STATION2.
WHEN 3
STATION_STATE = STATION3.
WHEN 4
STATION_STATE = STATION4.
WHEN 5
STATION_STATE = STATION5.
WHEN 6
STATION_STATE = STATION6.
WHEN 7
STATION_STATE = STATION7.
WHEN 8
STATION_STATE = STATION8.
WHEN 9
STATION_STATE = STATION9.
WHEN 10
STATION_STATE = STATION10.
WHEN 11
STATION_STATE = STATION11.
18. Error:
Incase of the parameter QUEUE-ID Error, QUEUE-ID is neither a parameter nor a select option in program rsbdcbtc.
Correction:
The parameter in program rsbdcbtc is QUEUE_ID and so is changed in this program
E.g.: In program Z_CARRIER_EDI_INTERFACE
     submit rsbdcbtc with queue-id = apqi-qid and return. "ECC6
     The parameter name changed by replacing '-' with '_' as in program rsbdcbtc "ECC6
Submit rsbdcbtc with queue_id = apqi-qid and return. "ECC6
19. Error:
Incase of EPC Error, Field symbol <TOT_FLD> is not assigned to a field .
Correction:
This error couldn't be rectified as the error occurs in a Standard SAP include- LSVIMF29.
The OS Note - 1036943 needs to be applied.
Error:
OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE.
Correct:
OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
Error:
Constants : c_tab type x value '09' .
Correct:
Constants : c_tab type abap_char1 value cl_abap_char_utilities=>horizontal_tab .
Error:
Data : begin of output_options occurs 0 . Include structure ssfcompop.
Data : end of output_options .
Correct:
Data : output_options type standard table of ssfcompop with header line .
Error:
PARAMETERS : NAST TYPE NAST .
Correct:
PARAMETERS : NAST TYPE NAST NO-DISPLAY .
Replace WS_DOWNLOAD and WS_UPLOAD by
GUI_UPLOAD and GUI_DOWNLOAD and check the import and export parameter types , do the changes accordingly. Because FILENAME paramater type is different because of this it will give dump.
For issue during Issue using SO_NEW_DOCUMENT_ATT_SEND_API1 Function module, the solution is After this FM we should put COMMIT WORK.
Issue:
Moving data from one structure to another structure if those two structures are not compatible
Solution:
we should use move-corresponding or field by filed we need to move it.
If database structures are different in 4.6c and ECC6.0,
Then we should go with append structure concept.
While testing the report if it gives dump at Select query level or any database or view level,then just goto that table or view and goto the data base utility(se14) adjust the database. But make sure that selected radio button in se14 transaction should be activate and adjust database
Also Check this link.
http://help.sap.com/saphelp_nw04/helpdata/en/62/3f2cadb35311d5993800508b6b8b11/frameset.htm
Reward points if helpful.
Regards,
Ramya

Can anybody explain in more detail about NO-DISPLAY in selection screens..

an anybody explain in more detail about NO-DISPLAY in selection screens.. in that it is saying
"If you want to display a parameter only in certain cases, for example, depending on the values entered by the user in other input fields of the selection screen, you cannot use the NO- DISPLAY addition. If you use NO-DISPLAY, the parameter actually is an element of the interface for program calls, but not an element of the selection screen. As a result, you cannot make it visible using the MODIFY SCREEN statement. To hide a parameter that is an element of the selection screen, you must declare it without the NO-DISPLAY addition and suppress its display using the MODIFY SCREEN statement."
what is the meaning of this?

This is use a lot in programs which are submitted using the SUBMIT statement. Say that you have a program which runs as usally with a selection screen and nornal output, but you also have some logic built in there that needs to be execute when this program is not ran by the user with the selection screen, but submitted. You can use a PARMETER statement the selection screen and NO-DISPLAY to hide it when normal processing by the user. You could pass a value to the parameter when it is called via the SUBMIT statement. Does this make sense?
Regards,
Rich Heilman

Give me details about rule details functions conversion, currency etc in bi

give me details about rule details functions conversion, currency etc in bi when creating transformation

Rule Type
Use
The rule type determines whether and how a characteristic or key figure, or a data field or key field is updated into the target.
Direct Assignment:
The field is filled directly from the selected source InfoObject. If the system does not propose a source InfoObject, you can assign a source InfoObject of the same type (amount, number, integer, quantity, float, time) or you can create a routine.
If you assign a source InfoObject to a target InfoObject that has the same type but a different currency, you have to translate the source currency into the target currency using a currency translation, or apply the source currency.
If you assign a source InfoObject to a target InfoObject that has the same type but a different unit of measure, you have to convert the source unit of measure into the target unit of measure using a unit of measure conversion, or apply the unit of measure from the source.
Constant:
The field is not filled by the InfoObject; it is filled directly with the value specified.
Formula:
The InfoObject is updated with a value determined using a formula.
Read Master Data:
The InfoObject is updated by reading the master data table of a characteristic that is included in the source with a key and a value and that contains the corresponding InfoObject as an attribute. The attributes and their values are read using the key and are then returned.
The Financial Management Area characteristic is included in the target but does not exist in the source as a characteristic. However, the source contains a characteristic (cost center, for example) that has the Financial Management Area characteristic as an attribute. You can read the Financial Management Area attribute from the master data table and use it to fill the Financial Management Area characteristic in the target.
It is not possible to read recursively, that is, to read additional attributes for the attribute. To do this, you have to use routines.
If you have changed master data, you have to execute the change run. By reading the master data, the active version is read. If this is not available, an error occurs.
If the attribute is time dependent, you also have to define when it should be read: at the current date (sy-date), at the beginning or end of a period (defined by a time characteristic in the InfoSource), or at a constant date that you enter directly. Sy-date is used as the default.
Routine:
The field is filled by the transformation routine you have written.
The system allows you to select whether the routine is to be valid for all attributes for this characteristic, or only for the attributes displayed.
Transformation rules generally only have one return value. If you select Return Table, the corresponding key figure routine no longer has a return value; it has a return table. You can then generate any number of values from a data record.
For DataStore objects and InfoObjects: you cannot use the return code in the routine for data fields that are updated by being overwritten. If you do not want to update specific records, you can delete these from the start routine.
If, for the same characteristic, you generate different rules for different key figures or data fields, a separate data record can be created for each key figure from a data record of the source.
With InfoCubes: You can also select Routine with Unit. The return parameter 'UNIT' is then also added to the routine. You can store the required unit of the key figure, such as 'ST', in this parameter. You can use this option, for example, to convert the unit KG in the source, into tons in the target.
If you fill the target key figure from a transformation routine, currency translation has to be performed using the transformation routine. This means that automatic calculation is not possible.
Time Update:
When performing a time update, automatic time conversion and time distribution are available.
Direct Update: the system automatically performs a time conversion.
Time Conversion:
You can update source time characteristics to target time characteristics using automatic time conversion. This function is not available for DataStore objects, since time characteristics are treated as normal data fields. The system only displays the time characteristics for which an automatic time conversion routine exists.
Time Distribution:
You can update time characteristics with time distribution. All the key figures that can be added are split into correspondingly smaller units of time. If the source contains a time characteristic (such as 0CALMONTH) that is not as precise as a time characteristic of the target (such as 0CALWEEK), you can combine these characteristics with one another in the rule. The system then performs time distribution in the transformation.
The time distribution is always applied to all key figures.
Initial:
The field is not filled. It remains empty.
No Transformation:
The key figures are not written to the InfoProvider.
Unit of Measure Conversion and Currency Translation
You can convert data records into the unit of measure or currency in the target transformation.
Assigning InfoObjects for Converting Amounts or Currencies
Use
An InfoObject has to be assigned to a source field of a DataSource if currencies or units of measure need to be converted. The translation types require InfoObjects as input fields to carry out a conversion. You therefore have to assign the appropriate InfoObject to the source field.
If the target has a fixed unit, you only have to assign an InfoObject if you want to carry out a conversion. Otherwise, you can select the No Conversion option.
Procedure
1.      You are in the rule details. Select the rule type Direct Assignment.
2.      Select an appropriate key figure in the InfoObject Assignment field in the Source Fields of Rule area.
3.      Choose the required conversion in the Currency field.
4.      Choose Transfer Values.
Example
In your transformation, you want to assign the AMOUNT field of the DataSource to the FIX_EUR InfoObject in your target, carrying out a currency conversion. To do so, you assign the FIX_EUR InfoObject to the AMOUNT field in the rule details so that the currency can be read from the InfoObject.
Hope this helps u...
Regards,
KK.

Need input on Approval Process via hand held devices

Hi All,
Need inputs on the given scenario. We have implemented Quotation Management (VA21) for our client. The quotation goes through various levels of approval (or decline) via the Workflow below it is finally given to the customer.
Users usually logs into SAP and approves (or decline) the quotation via the SAP Inbox. We have designed multiple decision process on the work item in the inbox. Alternatively users can also log in to Enterprise portal, which has been designed for them, to act on the quotation. Users are notified in their outlook mail about action that needs to be taken on the quotation.
Now user wants to have the decision process to be implemeted as such that they can take action (approve/reject) via hand held devices (viz Blackberry). We are using ECC 6 and also have Enterprise Portal EP 7EHP1. Owing to cost constraint, client cannot implement SAP CRM Solution.
If anyone of you has implemented such methodolgies or have worked on such solutions request you to get back to me with details regards to the timelines and cost and the desired process.
Regards,
Jayant

You could acquire software (e.g. 3i Mobile Workplace or similar) that could handle the decision processing with little effort.
If you wish to build a solution then the time/cost will depend on the complexity of the task visualization. You can create a Java client or use a simple HTML based web app.
The decision task can be visualized using a custom BSP or WebDynpro application. Communication with the BlackBerry could be via RIM push or you could just send an email with a link to your approval application.
The app would need to reserve the workitem and then complete the decision using the appropriate SAP_WAPI* RFC's.
Bear in mind that all the above assumes you are distributing the approval tasks within your corporate network supported by the BlackBerry Enterprise Server and MDS.
One of the bigger issues when using web apps is authentication. By default a web app requires the user to log on using their SAP user ID and password. Using a network user ID and password or using silent authentication is possible but requires more effort.

Is there a way to find out details about, who approved the RMA on system using front end or back end?

Is there a way to find out details about, who approved the RMA on system using front end or back end?

But is there a way (simple or not-so-simple) to find
out EVERY SINGLE FILE that's referenced on a
timeline? (I have lots of stuff imported into the
project that I know isn't used on any timeline, but
I'm afraid of moving or deleting things for fear of
never finding it again.)
I'd love to get some sort of "printout" (a list or
something) of every single file.
There is, go to browser and cntrl click on any one of the columns,
and select - show/source. A new column named "source" will pop up and will show where everything "lives". Click on the header at the top and it will justify the column as well. You'll notice this won't show anything for your seq.'s. of course, but will show stills/audio/motion files...
Once you have the new column, you can drag it next to the "name" column and get a grab of it and print it if you like, or whatever.
If you want to do this for just 1 seq., then can create a new bin and double click it to open it. Cntrl-A (select all) in your main seq. and just drag all into the new bin. You will see only what's in that seq. with the "source" column right next to it.
From what I've read, you seem to get the MM thing and it's obviously what you'll need to do to archive as the guys said. But what your missing is a file path system to where everything resides.
Hope this helps and that I've read you properly,
Peace
P-Book 1.5, 17" 2gsRAM Mac OS X (10.4.4) FCStudio

How to get details about disabled ID?

I've had a Verizon iPhone since late April 2011 (it's now June 8, 2011). Twice I've had the "disabled ID for security reasons" thing, and I can't figure out why. I'm the only human in the house. Unless the cat or his fleas have been trying to log in, it hasn't been me...
I got the message tonight, for instance. No trouble re-activating, but how do I get more details about what actually happened between last night and tonight, since I didn't get the message last night? I know that I haven't tried to manually log in for weeks. Is it a glitch that sometimes happens when downloading stuff automatically from the iTunes store? Or is some hacker actually trying to guess my password?
I frequently do start up iTunes (Snow Leopard 10.6.7) to download freebies. The only odd thing I remember in the past few days was when something labeled free triggered something that would have purchased it for real money if I clicked on a yes button. Other than that, the downloads have all just proceeded without fuss. The last phone system update was quite a while ago, although I did update some apps a few days ago.
I think I noticed the App Store was in the active list on my phone within the past few days, even though I didn't deliberately click on it. Also the phone app has started dialing (I think) when I didn't even start it up intentionally a couple of times. Is that what is happening with my id? Did the App Store think I was logging in for some reason? I would think a purchase would need to be started first, though, and I never have seen anything suggesting that's happened. And I don't think that actually happened between last night (no problem) and tonight (disabled).
So is there any place to actually check for activity, so I can figure this out?

jwoolman wrote:
Or is some hacker actually trying to guess my password?
a reasonable assumption.
in any case, see these support articles:
Apple ID: "This Apple ID has been disabled for security reasons" alert appears
Frequently Asked Questions About Apple ID

Need inputs on QM functionlity details about..

Similar Messages

Maybe you are looking for