Need installation document for OEM 11G on windows 2003(32 bit).

Hi,
As a part of my project, i need to install the OEM 11G on windows 2003(32 bit) machines and targets also windows 2003. there i need to install again agent 11g(11.1.0.1) and target DB is 10.2.0.4.
I have done the installation of OMS successfully and installed the agent 11g on target as well. i am facing challeges in configuring the database from OMS. i tried couple of options but nothing is working out. Finally i decided to cross check the installation procedure once again with the previously completed ones. could any body share the same.
in breif i have done following.
1) installed RDBMS 11G on OMS server.
2) insalled java 1.6.18.
3) installed WLS 10.3.2
4) installed the OMS 11G(11.1.0.1)
On agent side i installed agent 11g(11.1.0.1) to monitor a database which is of 10.2.0.4 version.
agent,listeners are reflecting on OMS with up status but DB is showing as "metric collection error". i tried all the possible options like removing and reconfiguring and agent clearing and agent restart etc...but no use. also i in the Oracle installation document, they mentioned as we need to set user equavelence between OMS and agent server but not sure of this, which i have not done. is this compulsary?
Sorry for putting all the things in one single thread.
Thanks in-advance.
Regards
DBA.

Did you check if the database is configured in GC?
If you can't connect using sqlplus to the user dbsnmp make a connection to the database: alter user dbsnmp identified by <password> account unlock;
In GC go to Targets, All Targets select the DB concerned and hit Configure. Enter the dbsnmp user password etc. After a while you will see the result: DB shows Up (I hope)
Eric

Similar Messages

Hard drive died. Need to reinstall on new laptop with windows 7 64 bit system, Need to get activation code for CS3 Web Premium.

Hard drive died. Cannot uninstall CS3 to remove copy registration. Need to reinstall on new laptop with windows 7 64 bit system, Need to get activation code for CS3 Web Premium.

Thank you Bob.
Just to clarify - in terms of backing up one set of these, would that just be so I had it on disk and didn't need to re-download from Adobe if the installation got corrupted somehow? Or do I need a backup for some other reason?
Thanks

Need installation cd for a HPF335 all-in-one deskjet printer.

NEED INSTALLATION CD FOR AN HP F335 ALL-IN-ONE DESKJET PRINTER. WHERE CAN I GET A COPY?

Hi,
Yes, the installer is downloadable - just select your OS on the link below, open up 'Drivers - Product Installation Software' and download the Full Feature installer.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=1153494&task=...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Installation document for SAP NetWeaver 7.01 ABAP Trial Version on XP

Hi Experts
Please give me link of installation document for SAP NetWeaver 7.01 ABAP Trial Version on XP or Tell me Steps for installation.
thanks
Best Regards
Jitender

If instructions contained in download doesn't help you you just have to search on SDN and web for miniSAP installation blogs:
/people/sap.user72/blog/2004/12/08/mini-me-of-was-620-the-saga-continues
http://sapport.blogspot.com/search/label/miniSAP
/people/sugree.phatanapherom/blog/2005/08/17/a-visual-installation-guide-on-sneak-preview-sap-netweaver-04-abap-edition
/people/manfred.lutz/blog/2008/02/21/web-dynpro-abap-exercises-from-teched-2007

Need Refresh Document for APO( SCM 7.0)

Hi All,
Need Refresh Document for APO( SCM 7.0) asap,
we are planning to do refresh of quality system with Production system
Environemnt is Unix
Database is Oracle
Live Cache Max DB

Hi,
Please check the upgrade guide in SAP service market place.
BR

Installation document for XI

Hi,
Pls let me know the link of whree i can get the installation document for XI

XI (eXchange Infrastructure) is a part of the Usage Type PI (Process Integration).
I would also recommend that you read the SAP NetWeaver Master Guide available at the same location.
Best Regards,
Matt
PS - As a moderator, may I also request that you spell check your postings and use complete words. Thank you.

Installation document for the latest essbase version

Latest Essbase version.
Where can i find the installation document for the latest essbase version

Install/config doc - http://docs.oracle.com/cd/E40248_01/epm.1112/epm_install/frameset.htm?launch.html
Cheers
John
http://john-goodwin.blogspot.com/

Oracle RAC 11g on Windows 2008 64 bit - blue screen error on both nodes

Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull and crs_state -t shows all services in two nodes are online.
When executed a select query with 100 sessions( For performance evaluation using Transaction generator ) ,the machine got crashed and blue screen is appeared on two nodes. I restrated the machines and and starts the same evaluation ,bt the same bug is repeating.
Can anyone suggest a solution to solve this issue? Is our hardware is not sufficient ? Shall we need to perform any
specific settings in Oracle RAC setup for performance evaluations?
Is our settings for load balancing is not enough? ( We added "Load Balancing= On" on tnsnames.ora on client for load
balancing)
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC 11g , Clusterware 11g R2 , ASM with 5 raw disk ( 1- votting disk ,1- ocr files and 3 disk files)
Edited by: user2033016 on Jun 29, 2011 10:02 PM

user2033016 wrote:
Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit.i guess you have installed/configured RAC using VMware. i guess, the problem is with your RAM size. how much disk space and RAM size you have allocated for each machine?
which documentation you have followed?

OBIEE 11g on Windows 7 (64 bit)

Experts,
I tried installing OBIEE 11.1.1.5 (both Simple and Software only install) mutiple times on my Laptop running Win 7 (64 bit), but all the times the installation hangs at "Creating domain", the first configuration step. Not sure what I'm doing wrong, I did all the pre-installation steps before running the setup.exe. Does anyone installed OBIEE 11g on Win 7 (64 bit). If yes, please suggest what other things I need to do for a successful installation
Regards,
Sarvan

Hi
Even though officially this is not supported on Windows 7 OS, still we should be able to install it without any issues. I installed OBIEE 11g simple edition on Windows 7, 64 Bit OS and everything is working fine. Infact I used Oracle Express Database Edition 10g instead of full blown Oracle 11g database. I used this to run RCU to create 2 obiee schemas. It did took lot of time though on windows like around 50 minutes for the full installation which installed weblogic, obiee on top of this, then create a default domain named bifoundation. I could create some test reports, dashboards etc.
Here is another link that is also successfull in installing OBIEE 11g on Windows 7, 64 bit:
http://123obi.com/2011/05/obiee-11g-11-1-1-5-0-installation-on-windows-7/
I did not do anything special.
1. Download all the installers, RCU etc.
2. First in my Oracle 10g express edition, run RCU and create 2 schemas for OBIEE.
3. Run obiee installer and wait for about an hour. It came out successfully. Started the domain, started OPMN Services, started a browser with one url.
4. One thing is. I first installed Java/JDK 64 Bit version and put this in the PATH variable. So when I run java -version, it showed me this 64bit JDK. BUT even though I did this, internally the obiee domain still used its own JDK. I checked this in the startup script file named "StartStopServices.cmd" having one property like this:
JAVA_HOME=C:\Oracle\Middleware115BI\Oracle_BI1\jdk
And also under the domain root folder like bifoundation_domain/bin/setDomainEnv.cmd, I could see JAVA_HOME using the same above location.
Thanks
Ravi Jegga

OBIEE 11g on Windows 7 64 bit - Error while configuring????

Hi Experts,
I am installing OBIEE 11g on Windows 7 64 bit. And I followed below steps:
1. Installed JDK 64 bit.
2. Installed Weblogic Server with 64 bit JDK.
3. Installed OBIEE 11g - Software only Installation.
4. Ran configuration script. cofig.bat.
5. Configuration Wizard opened and during the configuration process(step 10 of 11) got an error. Refer below screen shot for the error.
6. I got the same error when I tried installing 11g on Win server 2003 32 bit and I installed JRocket MissionControl and reinstalled 11g and there are no errors.
7. So, remembering that I installed JRocket Mission Control 64 bit.
8. Un installed previous 11g.
9. Reinstalled 11g on Windows 7 64 bit.
10 And coming to configuration part it gave same error. Don't know what to do.............can any one help me at this point.
http://img690.imageshack.us/img690/1342/obiee11gconfigerror.jpg
Thanks in advance,
DK

Hi All,
I've got the same error but with the installation of OBIEE 11g on Windows 32-bit.
I also tried to continue the installation, but I've got another error in the Executing: opmnctl start coreapplication_obisch1.
Even with those errors, I finished the installation but of course I've some problem with the presentation server and webLogic, becasue they're not configured properly.
Any idea how to solve the problem?
Thanks

Installing SOA 11g on Windows XP 64 bit

Hi!
I wat to install Oracle SOA Suite 11g on Windows XP 64 bit.
Probably I have to install separate 64 bit JDK? Are there any other tricks or issueses?
Thx

SOA Suite 11g works on 64 bit perfectly
you need to first install 64 bit jdk, then other components
this below links will give complete details about soa11g installation :
http://www.oracle.com/technetwork/middleware/soasuite/overview/quickstartguidesoasuite11gr1ps3-313245.pdf
http://www.xenta.nl/blog/2010/05/01/oracle-soa-suite-11g-patch-set-2-installation/
http://www.packtpub.com/article/installation-configuration-oracle-soa-suite-11g-1

Installation of oracle8i on windows 2003 64 bit

Hi,
We have oracle 8.1.7 on windows 2003 32 bit, now we want to migrate our system to 64 bit windows with oracle 10.2.0.4.
But when we we are trying to install oracle 8.1.7 on windows 2003 with 64 bit we receive below error.
ORA-12546 tns permission denied.
Kindly help us to resolve the same. as after installation of 8.1.7 we can be able to migrate the database to 10g.
It is not possible to use import export due to application dependency.
Kindly advice
Abhay.

ahk wrote:
Hi,
Thanks for the reply,
After doing import of the production schema on the 64bit server with 10g.
users are not able to log in into the application as password encryption description is not at all happening, as a result users are not able to log in to the application.What sort of password encryption? Did it have anything to do with the character set by any chance?
Is it ok if we apply 8.1.7.4 patch on production server, move that backup on 64 bit server & directly migrate it to 10g 64bit. (While doing the testing we have applied the 8.1.7.4 patch on the 8.1.7.0 database on 32 bit & application worked fine with no problem)As you have indicated that there were problems getting the 8i installation to work on a 64 bit server, I would again advise to upgrade to 10g on the same server and then migrate to 64 bit edition on 64 bit server.

Link to downlaod 10.2.0.4 for windows 2003 64-bit

hi, can you help me to provide link to download 10.2.0.4 for windows 2003 64-bit?
Thanks

On the OTN site there's a download page with 10.2.0.4 for Windows Vista x64 and Server 2008 x64, but for "plain" Windows x64, I see only the base 10.2.0.1 release.
So you would need a Patch Set for 10.2.0.1 -> 10.2.0.4.
For retrieving/being allowed to use Patch Set releases, you need Support (or SULS as the service is called in contractual terms) and a support web account.
Edited by: orafad on Jan 7, 2009 1:00 PM

Pre requisites for installing R12 on windows 2003

Hi,
I am trying to install R12 on my home PC which is running on WINDOWS 2003. I have tried starting installation but it is failing with RW-50004 error Error code recieved when running external process.
I think i missed configuring loop back adapter. Could any one plz tell me what is loop back adapter and what is the use of it. And any doc for pre rerequisites for installing R12 on windows 2003.
And how can i solve this problem.

Hi taher;
I am trying to install R12 on my home PC which is running on WINDOWS 2003. I have tried starting installation but it is failing with RW-50004 error Error code recieved when running external process.RW-50004 error generic error. Can you give more details from log files?
By the way for r12 installation-requiriment please follow Hussein Sawwan's previous greatest posts:
Re: installing oracle R12 on windows 2003
Also you can check:
http://www.databasejournal.com/features/oracle/article.php/3768101/Installing-Oracle-E-Business-Suite-R12-on-Windows-2003.htm
I think i missed configuring loop back adapter. Could any one plz tell me what is loop back adapter and what is the use of it. And any doc for pre rerequisites for installing R12 on windows 2003. Just check log files for decide what is missing...
For loop back adapter check:
Re: Application 11i doesn't run if disconnected from network
Regard
Helios

TS3212 We can't download iTunes for our computers! (Windows 7 64-bit)

Hi, I'd welcome some helpful advice for downloading iTunes for a computer with Windows 7 64 bit operating system. I have older computers with Windows Vista 32 bit systems and have no trouble either downloading or installing iTunes to them. However with two computers using Windows 7 64 bit systems I click on download iTunes then a screen comes up and tells me thanks for downloading iTunes, eventhough nothing has downloaded! No dialogue boxes come up and I don't have pop up blockers enabled on my browser (Internet Explorer} or on my antivirus! So I can't even download the blasted thing let alone install it! thank you for your consideration.

Thanks for the advice, however I had already tried using Firefox originally and then Internet Explorer but the result was still the same.

Need installation document for OEM 11G on windows 2003(32 bit).

Similar Messages

Maybe you are looking for