Need Instructions for installing AE card in dual G5 tower

I need instructions for installing a AE card in a dual 2 GHZ powermac G5. I understand I need to also install an external antenna. Since I do not have an antenna where is the best source for the antenna, apple or an outside vendor. My G5 is presently connected to a netgear router and I want to use the AE card to communicate with an airport express base station with airtunes connected to my stereo receiver. Would this create a conflict since my computer is connected to the netgear router. Any help would be appreciated.
ron

] I need instructions for installing a AE card in a dual 2 GHZ powermac G5.
http://www.info.apple.com/usen/cip/pdf/g5/apec_c.pdf
]I understand I need to also install an external antenna. Since I do not have an antenna where is the best source for the antenna, apple or an outside vendor.
You are going to need the t-shaped external aerial otherwise this is not going to work. Even though your PowerMac did not come with an Airport Extreme Card built in, it would have been supplied with the aerial.
You will need to find a replacement.
]I want to use the AE card to communicate with an airport express base station with airtunes connected to my stereo receiver. Would this create a conflict since my computer is connected to the netgear router.
I am presuming that your Netgear is not wireless.
Can you connect the Airport Express to the router are do you want it in a different room?
You will be able to be connected to the router and AX at the same time, but in order to avoid internet and network issues, you should ensure that built-in-ethernet is above Airport in the network configurations.

Similar Messages

  • I need instructions for installing blue tooth for apple iphone 4s?

    I need instructions for installing blue tooth for apple iphone 4s?

    We have Jabra bluetooth.  We got out the instructions that came with the Jabra and and followed them.  Worked like a charm.  Just remember that once the bluetooth is paired, you cannot go more than 30 feet from your phone while using it.

  • Need instructions for installing new "superdrive"

    Just bought a superdrive, as recommended by folks here. It's a Pioneer DVR-116DBK and it came with generic instructions. But when I swing down the side door on my Mac, I'm clueless about what I need to do to get the old weird burner out and put the new one in.

    Look at the video link on this page (last line G4 AGP) http://eshop.macsales.com/tech_center/installation.cfm
    Here's the text from the G4 Service Manual
    Step 1
    1. From inside the chassis, behind the front panel, push the two bezel tabs forward to release the drive bezel from the front panel.
    2. Disconnect the bezel from the hinges on the front left side and remove the bezel from the computer.
    Step 2 Before you begin, do the following: • Open the side access panel. • Remove the CD-ROM/ DVD-ROM/DVD-RAM/Zip drive bezel.
    Step 3
    1. Remove the two screws on the drive carrier. (on front) Note: You remove the drive carrier from the computer with the drives attached to the carrier.
    Step 4
    2. From inside the chassis, push the drive carrier forward about 1 inch.
    3. Disconnect the following cables from the back of the CD-ROM, DVD-ROM, or DVD-RAM drive: •power cable (P7) •IDE data cable •Power Mac G4 (PCI Graphics): audio cable
    4. Disconnect the following cables from the back of the Zip drive (if present): •power cable (P6) •IDE data cable
    Step 5
    5. Continue sliding the drive carrier out of the computer. Important: The drive carrier may be difficult to push forward due to the EMI gasket and tape located on the underside of the carrier (directly below the Zip drive).
    6. When the carrier is out of the computer, remove the EMI shield from the back of the CD-ROM, DVD-ROM, or DVD-RAM drive.
    Step 6
    Note: Perform the following procedure if you are replacing the CD-ROM, DVD-ROM, DVD-RAM, or Zip drive.
    7. Using a Phillips screwdriver, remove the drive carrier mounting screws.
    8. Slide the drive(s) out of the carrier. Replacement Note: The DVD-RAM drive is not as tall as the CD-ROM and DVD-ROM drives. Before screwing the DVD-RAM drive back into the carrier, lift the back of the drive slightly so that the drive is flush against the carrier. Replacement Note: When inserting the drive carrier into the computer, make sure the carrier tab slides into the hole on the stationary drive shelf.
    deeper, *don't post you Mac's serial number* (or email address). A forum moderator will remove it soon.
    Good luck on the upgrade.
     Cheers, Tom

  • Need instructions for downloading/installing Flash Player

    Need instructions for downloading/installing Flash Player in my PC

    Hi, This is the Adobe Flash Player Uninstall link:
    http://kb2.adobe.com/cps/141/tn_14157.html
    This is the Adobe Troubleshooting Guide which you may want also to review. I would suggest using the Manual Installers which you can download and SAVE to your Desktop. Pay attention to any apps using Flash, you may need to Disable any Anti-Virus. Be sure to use the Administrator Account and check Settings. Be sure to Reboot after running the Uninstaller and also after Installing.
    http://kb2.adobe.com/cps/191/tn_19166.html
    eidnolb

  • Step by Step Instructions for Installing Self Signed Certificate using Certificate Modification Tool

    I am looking for some step by step instructions for installing the self signed certificate from my Microsoft SBS 2003 server on a Treo 755p and 750p.  In particular I need some help with the form of the actual certificate and how to use the Certificate Modification tool. 
    Some questions I have are as follows:
    1. When I install the certificate on a Windows Mobile device I used an exported version of the certificate.  This export is done using the DER x.509 format.  Is that the same form I’ll need for the Palm?  Do I need some other form? Can/should I just use sbscert.cer file that is generated when SBS is configured?
    2. Does the self signed cert need to be installed on the computer being used to update the Palm or do we just need to be able to access the appropriate .CER file?
    3. There are three things included in the PalmCertificatesTool.zip file:
                                    Trusted CAs (folder)
                                    Cert2pdb.exe
                                    PalmCertificates.exe
       How do I use these tools?
    4. It looks like the PalmCertificates.exe file opens an interface that will allow me to browse to the desired .CER file.  Then I suppose I use the < Generate PDB > to create something that needs to then be uploaded to the Palm device?  Not having any real experience with a Palm device how do I upload and install this file? 
    5. Once uploaded do I do something on the device to install it?
    If there is some white paper that provides step by step instructions on doing this that would be great.
    Thanks,
    Walt Bell
    Post relates to: Treo 755p (Verizon)
    Post relates to: Treo 755p (Verizon)

    Thanks for that.
    I have one question after reading the article 43375:
    The article has you "Turn of AutoSync" and then "Reset the device".  It then indicates the device should be left idle. 
    The next step relates to running the PalmCertificates.exe, navigate to the certificate file and add it and then run the < Generate PDB > button.  Should the device be connected to the computer during this process? If so, at what point after the reset do you connect it to the computer?
    Thanks!
    Post relates to: Treo 755p (Verizon)

  • Basic instructions for installing Air?

    Hi
    I'm use Flash CS5, and want to learn Air.
    I installed Air 2.5.
    Do I need to istall the SDK?  If so, where do I put it, and how do I set it up?
    What is the difference between the runtime and sdk?
    Thanks for your help.
    Shaun

    Hi Shaun,
    Thanks for showing interest in AIR 2.5.  To start, it sounds like you've installed the AIR 2.5 runtime, which by itself will let you install and run AIR applications on your computer.  To start developing, you'll need to get the latest SDK.  You can grab a copy of this for Flash CS5 here:
    Adobe Flash Professional CS5 Extension for AIR 2.5
    There are instructions for installing at the bottom of the page, along with a link to the beta forum.  I'd also like to encourage you to check out the Adobe AIR Quick Starts for Flash Developers, the video tutorial series Designing an AIR Application, and the pdf Developing Adobe AIR 1.5 Applications With Adobe Flash CS4 Professional.  While the video series and the pdf are a bit dated, they still contain great information and you can information on the latest 2.5 API's on our Adobe AIR Developer site.
    Hope this helps,
    Chris

  • Need instructions for setting up wireless network at home, w/o base station

    I have a new iMac with Airport Extreme card and a MacBook, also with a card. I need instructions for connecting the two Macs via Airport. I do not have a base station. The Help on the Mac does not match my actual system.
    All of the manuals that I can find are for the base station.
    Please help.

    Hi W
    You don't mention if you have any kind of internet connection on either computer, so I'll assume that you don't, and this setup will simply network the two computers with no consideration of the internet.
    On either of the computers, make sure that the Airport icon is visible in the menubar, and that Airport is active - check System Preferences, Network, Airport to make sure both are the case. Now, in the menu icon, click "Create Network". You'll be prompted to name the new network, set a channel if you need to, and you can also set a password under "Show Options". Once the network has been created, your Airport icon will change to a solid grey with a computer inside it.
    You should now be able to connect to the new network on your other Mac and share services.
    Let me know if you have any problems with it.
    Matt

  • Instructions for installing SAPCRYPTO library

    Where can I find the latest instructions for installing the SAPCRYPTO library?  I have a copy of "installing the sapcrypto library and starting the SAProuter" that I printed from the service marketplace in 09/2007, but cannot seem to find any updated instructions on the saprouter-sncadd site.  We are moving the saprouter service to an different server and I need to download & install the latest files.
    I did not find any pertinet OSS note either.
    Thank you,
    BV

    http://service.sap.com/saprouter-sncdoc
    good luck.
    b.rgds, Bernhard

  • The Examples They Show Are not for my computer I Need instructions For A Windows Computer HP TouchSmart

    The Examples They Show Are not for my computer I Need instructions For A Windows Computer HP TouchSmart

    hp
    The answers are in the details, and you have not given us enough details to help you.
    Right now I am guessing at what you seek. Are you trying to use your HP Touch Screen to do your
    Premiere Elements importing, editing, and exporting and the Touch Screen movements are not working
    to do what you want to do in Premiere Elements?
    Have you configured the HP computer Touch Screen? Using the Touch Screen, what cannot you do
    that you can do with the mouse?
    HP Support document - HP Support Center
    If I am guessing correctly here, does the mouse work instead of the Touch Screen to allow you to
    work in the program.
    I suspect that Premiere Elements does not support Touch Screen and you will end up using a mouse, but I would need to do more homework on
    that.
    This is not Adobe. Rather user to user. If you are dealing with the current version, 13, you might want to contact
    Adobe about the matter. More on that later, once you confirm the above or let me know that I have completely
    misinterpreted your question/concern.
    ATR

  • I already have flashplayer on my mac. I have been using online video tutorials for learning, but suddenly all my YouTube vodeos say "plug-in blocked". I follow the instructions for installing or updating, but nothing has helped. I have looked everywhere i

    I already have flashplayer on my mac. I have been using online video tutorials for learning, but suddenly all my YouTube vodeos say "plug-in blocked". I follow the instructions for installing or updating, but nothing has helped. I have looked everywhere in Safari help with no success. How can I restore this plug-in, PLEASE?
    Austin Moore
    Knoxville, Tennessee

    I already have flashplayer on my mac. I have been using online video tutorials for learning, but suddenly all my YouTube vodeos say "plug-in blocked". I follow the instructions for installing or updating, but nothing has helped. I have looked everywhere in Safari help with no success. How can I restore this plug-in, PLEASE?
    Austin Moore
    Knoxville, Tennessee

  • I need instructions for using my HP Photosmart D5345

    I need instructions for operating my HP Photosmart D5345.  I lost them.

    Hi Tigger59,
    Here is a link to the online manuals for the HP Photosmart D5345:
    http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&jumpid=reg_r1002_usen&lc=en&product=3...
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • Need instructions for 17" LCD replacement...

    Need instructions for the original (non-ALS) 17" LCD replacement...
    Ive replaced everything else, time to replace the LCD, but need the procedure to do it.
    Thanks

    Before you do surgery on your imac, go to applications, system preferences, displays, and see if you can adjust the brightness. My screen was significantly darker after I upgraded to 10.4.3 and I was able bring it back to life. For some reason the upgrade caused the brightness button to regress to 0 on a scale of one to ten- hope this works for you

  • Instructions for installing quicktime pro:

    I have Quicktime 7, and I purchased QT Pro, but the instructions for installing QT Pro aren't working on my PC. The instructions say to go to Settings in my Startup menu, but there is no Settings in my Startup menu. From there it says to find the Control Panel, then go to the Quicktime Control Panel. I do have Control Panel in the Startup menu, but it doesn't take me to Quicktime. If I open Quicktime, there's no Control Panel in there either. I'm totally at a loss! Anyone know what to do?

    Look under the Edit menu.

  • Need instructions for iphone 4

    need instructions for use of iphone 4 - where can I obtain please.
    cant be simpler

    The manual can be found at Apple - Support - Manuals
    Allan

  • Need Recommendation for Windows USB 802.11N Dual Band Card for AEBS

    I am building a very large WiFi network to support 100 users. The plan is to use only Dual Band Airport Extreme Base Stations.
    Can anyone recommend a compatible USB adapter that will work on Windows (XP, Vista, & Windows 7)?
    Looking for something that has 802.11n + 2.4GHz and 5GHz bands.
    Any help is appreciated. (Google has been help to tell me what WON'T work... leaving me concerned that my network is going to have issues when it comes to PC users).

    The one PC that is running Windows 7 which is the only PC running Windows 7, the rest are XP or Vista has a Atheros AR5007 wireless card keeps dropping connection to the airport. The computer is a HP Pavilion 1448dx. Does anyone have any suggestions for me to fix the signal drop to that computer, all of the other computers are fine.
    Yes, please check with either HP or Atheros to see if there is an updated driver for the wireless card.
    Another quick question: I was wondering if I could hook up my previous router (Belkin Wireless G Plus MIMO Router) to my Airport Extreme and have the PC's run off the belkin and my mac just run off the Airport Extreme and solve the issue with the one PC dropping connection.
    Yes, it may be possible. The Belkin would have to be connected to the new 802.11n AirPort Extreme Base Station (AEBSn) via an Ethernet patch cable and reconfigured as a bridge. In addition, the Belkin's wireless radio channel should be changed to one at least 3-5 channels away from the AEBSn's channel.

Maybe you are looking for

  • TransformerConfigurationException...Could not compile stylesheet

    So far my XSLT stylesheet was executed in operations mapping without problems. However I had to make some changes (e.g. adding some additional xsl:choose elements) and now I get the following compilation error: TransformerConfigurationException occur

  • Please help me with my incoming calls

    I can call out on my phone and send and receive text messeages but I can't get any call's in. a verizon operater come on. please help me

  • Does you Mail.app crash several times every day, too?

    This application crashes very often. Every 5-10 minutes... The problem still exists after update to 10.10.1. Do you know the reason of this unstability? Tomasz Below example: Process:          Mail [560] Path:             /Applications/Mail.app/Conte

  • Photo and music transfer to iPad with Mac OS 10.4.11

    Since iPad will not sync with OS 10.4 and had to use PC iTunes how can I transfer my music and photos from the Mac or iPhone? Anyway to transfer from iPhone to PC iTunes and then sync to iPad?

  • Adobe Tracker marking old comments as new on startup.

    Hi all- Each time I start Tracker, it marks old comments as new, but only those comments from me, the initiator. For example-one document that is currently out for review has 16 comments from me. For three days now, every time I open Tracker when it