Need instructions for setting up wireless network at home, w/o base station

I have a new iMac with Airport Extreme card and a MacBook, also with a card. I need instructions for connecting the two Macs via Airport. I do not have a base station. The Help on the Mac does not match my actual system.
All of the manuals that I can find are for the base station.
Please help.

Hi W
You don't mention if you have any kind of internet connection on either computer, so I'll assume that you don't, and this setup will simply network the two computers with no consideration of the internet.
On either of the computers, make sure that the Airport icon is visible in the menubar, and that Airport is active - check System Preferences, Network, Airport to make sure both are the case. Now, in the menu icon, click "Create Network". You'll be prompted to name the new network, set a channel if you need to, and you can also set a password under "Show Options". Once the network has been created, your Airport icon will change to a solid grey with a computer inside it.
You should now be able to connect to the new network on your other Mac and share services.
Let me know if you have any problems with it.
Matt

Similar Messages

Instructions for extending a wireless network through a wired connection

These are the instructions for extending a wireless network by wiring two airports together.
The benefit of this is to provide a strong signal in more locations in your home or business.
The advantage of this technique over WDS is that the wired connection is faster and more reliable.
These instructions assume you have a) an existing wireless network setup using an airport , b) a new airport that you want to add to your network, c) you can run a cat 5 cable between the two airports, and d) you are familiar with the airport utility.
If while using these instructions you are prompted to update your airport firmware please do so.
1) Gather the following information from your existing Airport on the Summary tab of Airport utility:
a) Wireless Network Name
b) Wireless Security
c) You will also need the password, which hopefully you just know.
2) Plug in your new Airport, connect it to the existing Airport using a cat 5 cable.
3) Reset the new Airport using the tip of a paper clip. On my Airport Express that is next to the audio out.
4) After a short wait the new Airport should appear in Airport Utility with a generic name.
5) Click the new airport and click "Manual Setup". You may have to cancel out of some popups to get to the Manual Setup button.
6) On the "Base Station" tab set a "Name" that does NOT equal the the name of your old Aiport. Also set the password. This us the password that one uses to make changes to the setup of the Airport.
7) On the "Wireless" table set a "Wireless Network Name", "Wireless Security", and "Password" to exactly match that of your old Airport. This is the password that one uses to gain access to the network.
8) On the "Internet->Internet Connection" tab set connection sharing to "Off (Bridge Mode)".
9) Click "Update" at bottom right of Airport Utility.
10) Test by using "Advanced->Logging and Stats->Wireless Clients" to see which clients are connecting to which Airport.

viafax999 wrote:
coolhwhip wrote:
Thanks for the reply. Like I said, I am pretty new to this. So I need to buy something like this to put in my media center then?
http://www.amazon.com/Hawking-HWREN1-Hi-Gain-Wireless-300N-Extender/dp/B001DMEYCY/ref=sr_1_1?s=pc&ie...
Do I even need the Wireless N router at all, or will the Westell do the trick? I'd be looking to stream HD from my main home PC, so I need good wireless speed.
I assume that there is a tv in your media center so what would make much more sense would be to get a coax splitter and split the coax at that tv and then move the vz westell router to the other side of the splitter. It really makes no matter where the westell router is on the coax setup and doing this should allow you to connect your devices directly to the router.
So the coax feed from the ONT comes in through the garage into the office and is connected to the Westell in the office (which is hard-wired into my office PC). If I move the Westell to the entertainment center I'll be in the same boat w/ my office PC then, i.e. needing a wireless connection to the Westell to get internet access. Am I missing something here?

How do I set up a wireless network with an AirPort Extreme base station and two airport extreme but between apple devices either by ethernet

How do I set up a wireless network with an AirPort Extreme base station and two airport extreme but between apple devices either by ethernet

This Apple support document provides good general information on configuring different types of neworks using multiple AirPort routers.
http://support.apple.com/kb/HT4145
In particular, you would want to focus on the information regarding a "Roaming Network"

Power Mac G3 Pismo with Airport wireless card in Mac OS X 10.4 won't connect to wireless network with newest Airport Extreme Base Station set at WPA Personal/WPA 2 Personal encryption.

My Power Book G3 Pismo with an Airport wireless card running Mac OS X 10.4.11 will not connect to my new Airport
Extreme Base Station using WPA Personal/WPA 2 Person encryption. The Airport firmware is version 9.52. From
posts I've read online at different places indicates the Airport card should support the WPA encryption. Perhaps the problem
is the Base Station is using a combination setting and the fault is in the base station?
Thanks for any suggestions

Perhaps an inexpensive usb wireless adapter would work as well?
This is probably the simplest way to get the G3 connected to the wireless network.
I'll have to read up on getting an express and using it as a wireless bridge as I am unfamiliar with the concept.
The new AirPort Extreme is broadcasting a wireless signal.
A new AirPort Express could be located close to the G3. The Express will pick up the wireless signal from the AirPort Extreme, then provide an Ethernet connection to the G3 though a short Ethernet cable.
This can work very well......IF.....you keep the G3 at a fixed location, since it will always be connected to the AriPort Express using an Ethernet cable.
I do have an old Linksys Wireless G router. I wonder if that would work?
In theory, yes. But it would have to use much older WEP "security", which is easily cracked in minutes using free tools available on the Internet. So, anyone who really wanted to get on the network could do so. It's an option, but not a very good one.

How can I extend a wireless network with my AirPort Extreme Base Station?

Today I purchased a brand new, dual-band base station to replace my Belkin N router, as I have had a handful of firewall, coverage, and other networking problems in my house lately. First off, I really like this router and it was very easy to setup. My MacBook Pro could use both bands and established a 300 Mbit/s link very quickly. After tweaking various settings to my liking, I was also able to maximize the connections on many of my non-Apple machines and devices. I noticed that the range of its network was better than my Belkin's, but unfortunately, it failed to completely saturate the area sufficiently. Since the Belkin still works well enough, I was hoping I could bridge them together one way or the other.
The Belkin router does not support any bridge mode that I know of, but the AirPort Extreme should be able to join a wireless network and then extend that over WiFi and Ethernet, correct? I would like to place them at opposite ends of my home so I can get strong WiFi signals everywhere inside. However, when I try to get the base station to connect to my preexisting WiFi connection, it tells me that I can't extend the network and fails to join.
So is this possible? And if it is, how would I go about setting it up? I know it would probably be easier if I had a simple range booster such as an AirPort Express, but I didn't buy one while I was at Fry's since I hoped I could make use of the older Belkin. This is its product page, if needed. Thanks for any suggestions.
-MacUser

The Belkin router does not support any bridge mode that I know of, but the AirPort Extreme should be able to join a wireless network and then extend that over WiFi and Ethernet, correct?
Sorry, but no. The AirPort Extreme Base Station cannot "join" a network like the AirPort Express or Time Capsule, but you wouldn't want to do this anyway because in this configuration these devices will only perform as wireless clients ... not routers.
Instead, the AirPort Extreme can either be extended or can extend another 802.11g or 802.11n AirPort ... or a very very few non-AirPort devices.
One option for your Belkin would be to connect it to the AirPort Extreme by Ethernet but this may not meet your requirements or be a desirable situation. Otherwise, you would need to get another AirPort to extend your current one.

Extending an Apple wireless network beyond reach of the base station

Hello; I have an apple network that consists of one AirPort Extreme with two airport expresses acting as wifi extenders for the Extreme. I need to extend my wireless network even further, beyond the distance where another airport express could connect to the extreme. Could I connect, via Ethernet cable, a third airport express to one of the two existing airport express's to accomplish this? If so, would I be using the WAN or LAN port? Thanks!

Could I connect, via Ethernet cable, a third airport express to one of the two existing airport express's to accomplish this? If so, would I be using the WAN or LAN port? Thanks!
Yes. You would configure the third Express as a roaming type network with the existing extended network. Since this Express will be in bridge mode, it really doesn't matter which port you use. However, for consistency, I would recommend that you use the WAN port for the connection.

Best option for setting up wireless network

I have ordered a new imac to replace the dying family PC. As it stands, I have my current PC connected to a linksys wireless router and have set up a wireless connection. Since the imac has an internal wireless router, Im not sure what the best way to set it up is? I have heard that it will be faster to do it through my current router? Im wondering if that is true. If I keep things as they are, shouldnt I be able to just install the lynksis software on the imac and set it up as I have my PC now? Any advice?

Your Macintosh does not have an 'internal router.' It does have the ability using AirPort Extreme to configure it to provide a shared computer-to-computer network. Generally speaking, this is a dumb idea.
You should simply leave your Linksys gateway or router in place, and configure your Macintosh as another wireless client on your subnet using DHCP to obtain an address from your existing Linksys device. There is no special software to install: you Macintosh comes pre-configured to enable wireless client services.

Connecting to a wireless network via PPPoE without a base station

Hi
I am having difficulties trying to connect my portable via PPPoE to an Access Point I just setup. I have assigned myself a username and password and address(192.168.1.x) on the wireless router and I manage to see the network with my mac but can't establish a connection. With a windows portable I can set up the connection and have checked that the network works fine.
wlan1-2.4GHz-pppoe AccessPoint
Dato PPPoE:
server DHCP PPPoE range 192.168.1.50-192.168.1.50
mikrotik software
PB 17
Wireless Card Type: AirPort Extreme
Wireless Card Locale: USA
Wireless Card Firmware Version: 405.1 (3.90.34.0.p18)
Any suggestions ?
Amiata
PowerBook G4 17" Mac OS X (10.4.9)
PowerBook G4 17" Mac OS X (10.4.9)

I have *Good News* and *Bad News*, but it is forward progress.
I have 2 WiFi networks in my house. An 802.11g and an 802.11n with different SSID names.
I created 3 locations
a) Offline - disabled all network interfaces
b) experiment11g - configured with ONLY the 802.11g SSID as the preferred network, with the Remember any network this computer has joined DISABLED (none of the related check boxes are checked).
c) experiment11n - configured with ONLY the 802.11g SSID as teh preferred network, and all the other settings as the 11g location.
I switch to the Offline, then switch to experiment11g. And here is where the *Bad News* comes in. The Offline location turns off the Airport card. Switching to experiment11g does NOT turn Airport back on. I have to do that manually. And now the *Good News*, when I do turn Airport back on, via the menu bar, it has switched to the 802.11g WiFi network.
If I switch to Offline, then to experiment11n. Again when I turn the Airport back on, I have switched to the 802.11n WiFi network.
So there is a way to switch WiFi networks.
The next step is to figure out how to turn the Airport back on as part of a script. Maybe something in Automator?
I am not very good at AppleScript, so maybe this is a question for the AppleScript forum?

Setting up airport extreme card and airport extreme base station

I have an ibook G4 about 3 years old with osx10.4.10 recently installed. I have recently bought an airport extreme card and have also bought an airport extreme base station.
There seems to be a problem with the set up of the card. It does not seem to find any wireless networks at all, including the base station. The base station seems to be working as I went through setting this up with Apple phone support and we managed to do it by connecting the laptop to the base station with an ethernet cable.
I think the problem is with the card. I think I need to reinstall and set up the card again from scratch, but can't figure out how to do this -aiport utility and airport setup assistant don't seem to help here as they take you straight to the stage of setting up a base station. I seem to remember when I originally installed the card for the very first time (before attempting to set up the base station) that it did find other wireless networks, so I don't think there is a physical problem with the card.
Any suggestions on getting the card working appreciated.
Many thanks

Hello bblairlondon. Welcome to the Apple Discussions!
First, verify if OS X "recognizes" the card, by using the System Profiler utility. Select the AirPort Card option under Network in the column on the left. The "Wireless Card Type" should be "AirPort Extreme (nxnnnn, nxnnnn)."
If no card appears, I suggest that you double-check your AirPort Extreme Card installation by using the following Apple Tech article: iBook G4: CIP Instructions
If the card does appear, then try the following ...
Reset the PRAM
o Shut down the computer.
o Turn on the computer.
o Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
o Hold the keys down until the computer restarts and you hear the startup sound for the second time.
o Release the keys.
(ref: Resetting your Mac's PRAM and NVRAM)

NEED HELP TO SET UP SMALL NETWORK - WIRELESS SIGNAL FROM NOVATEL U760 USB

Hello -
I need help setting up a small network in my new home in Florida, which has no wired broadband capability - not cable, not dsl. My options are satellite (which I'd like to avoid) or wireless broadband via Millenicom (or now Virgin Mobile) using their Novatel U760 USB stick.
Here are the network components - someone please tell me how to set this up:
PC #1 (has wireless card, but I've connected it by ethernet to the router)
PC #2 (no wireless card; connected via ethernet to router)
MACBOOK, 1 1/2 years old (2.1 GHz Intel Core 2 Duo, 4 gigs RAM), running OS 10.58, connected wirelessly to router.
AIRPORT EXTREME BASE STATION, Model A1143.
I'm not thrilled about using a wireless 3G signal as my primary one, (sprint network, claims 600 - 1400 kbps speed), but it costs 1/2 to 1/3 of what a slightly faster satellite signal would.
I have not ordered this service yet. Before I do, I'd like a clear understanding that I can, in fact, set up my simple network, which I'd probably do the same as it's now configured with cable broadband - both PC's plug via
ethernet into the Airport Extreme router, the MacBook connects wirelessly - AND,
my question is this:
Can I plug the wireless card - a Novatel U760 USB-stick device - straight into that USB slot in the Airport Extreme base station and will it automatically recognize that device?
Or, do I have to plug it into the MacBook and somehow share that wireless signal between the 2 PC's (only 1 of which has a wireless card, so I'd have to get a card for PC #2)?
And help anyone can provide will be much appreciated!
Thanks,
Em

from the Airport FAQ #14:
"Question: Can I connect my Soundsticks or other USB speakers to AirPort Express?
Answer: No. The USB port is for connecting a printer, not for other devices."
Im assuming other devices include USB modems.
So, I would say your cheaper route would be to get a second wireless card and just share your internet connection from one of your PC.

Help setting up wireless network with Verizon DSL

I bought a MacBook Pro and an Air Port Extreme yesterday. I have an iMAC G5 from October 2004. I have Verizon DSL service and a Westell Series 6100 modem.
Bottom line --> I can't get the wireless connection to work.
I have successfully used a wired dsl connection with my iMAC G5. But, I tried to just disconnect the ethernet cable from my computer and put it into the Airport Extreme and that didn't work. I used the utility to set up the base station and the network, but I'm not sure if I did it properly.
I know a PPPoE is involved but I'm not sure of how to configure the system properly. I'm also not sure if the problem is with the configuration of the AirPort extreme or with my Verizon modem.
All I know is that I want to see a green light on that thing and not a flashing orange one.
Does any one have some instructions for setting up your AirPort Extreme using Verizon DSL? Has anyone else had similar problems? Thanks in advance!
MacBook Pro & iMAC G% Mac OS X (10.4.9)

Just finished solving this problem. I am not a strong tech guy, but I know that since it works for others it is just a question of poking and pushing. Anyway it was nine hours in the making...
My snow airport working with an airport express had been bullet proof with verizon dsl for a couple of years. I wanted to upgrade since I am now Intel mac and hit the blinking amber light.
I am only going to be able to give the big picture... The AEBS found and worked with all my computers from the beginning, so the problem became that the default IP Address and Subnet Mask were wrong and never automatically adjusted by the assistants.
Take your working plug-in ethernet connections or the working snow connections from the Airport Utility Internet Connect page. I used the manual configure process to access the info screens.
I copied all the numbers down, but I believe you only have to insert the IP Address, Subnet Mask, Router Address and DNS servers. I put "dsl.verizon.net" in the domain search box.
Go up to the IPv4 pull down menu and select manual and put in the numbers you copied. Then click Update. When the software returns control, the AEBS will still be orange.
Toggle the IPv4 to "using DHCP" Click Update.
This should bring the green light.
I think I then updated the Network Preference Pane, probably had to manually put in my wireless password again. Browser and mail program worked.
I think that was all. I may have had to repeat the toggle to make it stick, but I am operational for the last several hours, including the airport express, a G4 laptop and a Sony PC.
Hope this helps.
Rpbert

How do I set up a wireless network at home??

Hi,
I am new to Mac's. I want to set up a wireless network at home, but I have not got a clue about AirPort, what it is or what it does!?! I am getting a new Mac, but my wife is currently using a Dell Windows laptop and our daughter is using a Windows PC. How do I set up a wireless broadband network at home which works with my Mac and my familys PC's? What do I need to buy and what do I need to do with them? I already have a broadband connection at home. Currently, my wife's PC is connected directly to the broadband modem (via an ethernet cable) that was supplied by the brodband company when I signed up to broadband.
Thanks for all your help with this.

scooter has provided links to Apple's pages for the AirPort Express and AirPort Extreme base station (AEBS).
Both of these devices are IEEE 802.11g wireless routers (also called base stations). If you have an Ethernet connection to the Internet (for example DSL or cable modem), you can connect either of these devices directly to that connection and create a wireless network. Since Ethernet and IEEE 802.11g are worldwide standards you can connect any compatible device (including PCs running Windows).
Every computer needs a unique IP address. You can think of an IP address as a street address for your house. A unique address guarantees that items addressed to you get to you.
Typically ISPs provide users with a single (one) public IP address. A public IP address is visible to anyone on the Internet. A router uses the single IP address provided by the ISP and creates multiple local (non-public) IP addresses for you computers. This allows you to use multiple computers.
If you need to connect both wireless and Ethernet computers you will need the AEBS. The AEBS provides a separate LAN port for Ethernet computers.
BTW, you can accomplish the same thing with any inexpensive wireless router.
The advantage of the AEBS over other routers is (a) built-in 56k modem for connecting to a dial-up ISP and (b) USB port for a single compatible printer.
The advantage of the AirPort Express over other routers is (a) sound output port for streaming music to a stereo and (b) USB port for a single compatible printer.

Need Instructions for installing AE card in dual G5 tower

I need instructions for installing a AE card in a dual 2 GHZ powermac G5. I understand I need to also install an external antenna. Since I do not have an antenna where is the best source for the antenna, apple or an outside vendor. My G5 is presently connected to a netgear router and I want to use the AE card to communicate with an airport express base station with airtunes connected to my stereo receiver. Would this create a conflict since my computer is connected to the netgear router. Any help would be appreciated.
ron

] I need instructions for installing a AE card in a dual 2 GHZ powermac G5.
http://www.info.apple.com/usen/cip/pdf/g5/apec_c.pdf
]I understand I need to also install an external antenna. Since I do not have an antenna where is the best source for the antenna, apple or an outside vendor.
You are going to need the t-shaped external aerial otherwise this is not going to work. Even though your PowerMac did not come with an Airport Extreme Card built in, it would have been supplied with the aerial.
You will need to find a replacement.
]I want to use the AE card to communicate with an airport express base station with airtunes connected to my stereo receiver. Would this create a conflict since my computer is connected to the netgear router.
I am presuming that your Netgear is not wireless.
Can you connect the Airport Express to the router are do you want it in a different room?
You will be able to be connected to the router and AX at the same time, but in order to avoid internet and network issues, you should ensure that built-in-ethernet is above Airport in the network configurations.

I just purchased the airport Express to use in hotels while traveling to create a wireless network from the hotels wired dsl. A friend said to set up the network from home prior to traveling. How do I set this up? Thanks.

I just purchased the airport Express to use in hotels while traveling to create a wireless network from the hotels wired dsl. A friend said to set up the network from home prior to traveling. How do I set this up? Thanks.

In addition to RyanJC's comments, the 802.11n AirPort Express Base Station (AXn) can store up to five different http://docs.info.apple.com/article.html?artnum=108081 configuration profiles. You will need to use the AirPort Utility to create & save these profiles.
To create a new profile:
Open AirPort Utility, select your AX from the list, and then, click "Manual Setup."
From the AirPort Utility menu, select "Base Station," and then "Manage Profiles."
Click "+" to create a new profile; give it a name, and then, click OK.
Set options, such as network name, passwords, Internet connection method, etc.
When done setting the options, click Update.
To switch profiles:
Open the AirPort Utility, select your AX from the list, and then, click "Manual Setup."
From the AirPort Utility menu, select "Base Station," and then "Manage Profiles."
Click on the desired profile, and then, click OK to apply the new profile and restart the AX.
Just remember to switch to the desired configuration profile before removing power from the AX.

I can get on the internet with my laptop using my wireless network at home but I can not get on the internet using my ipad. The wi-fi setting show a connection on my ipad but I can not pull up the internet. Any ideas?

My laptop connects to the internet via my wireless network at home. My ipad will not bring up the internet using the same connection. It shows in the wi-fi settings as connected but when I bring up safari, nothing comes up. Any ideas?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Need instructions for setting up wireless network at home, w/o base station

Similar Messages

Maybe you are looking for